linux-kernel - Re: [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87d71fa371739486a19f17a6b3ca72d2315220d2.camel@suse.de>
Date:   Wed, 13 May 2020 14:56:27 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     mbrugger@...e.com, u-boot@...ts.denx.de, bmeng.cn@...il.com,
        marex@...x.de, linux-kernel@...r.kernel.org
Cc:     sjg@...omium.org, m.szyprowski@...sung.com, s.nawrocki@...sung.com,
        mark.kettenis@...all.nl
Subject: Re: [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware

On Tue, 2020-05-05 at 18:26 +0200, Nicolas Saenz Julienne wrote:
> Newer revisions of the RPi4 need their xHCI chip, VL805, firmware to be
> loaded explicitly. Earlier versions didn't need that as they where using
> an EEPROM for that purpose. This series takes care of setting up the
> relevant infrastructure and run the firmware loading routine at the
> right moment.
> 
> Note that this builds on top of Sylwester Nawrocki's "USB host support
> for Raspberry Pi 4 board" series.
> 
> ---

Just for the record, here's the version of this in the Linux Kernel:
https://patchwork.kernel.org/cover/11529585/

Regards,
Nicolas


Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)