[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2a8f0190c9d418cee89451c7dc3a227b9d0b5f45.camel@suse.de>
Date: Mon, 01 Jun 2020 12:47:18 +0200
From: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To: mbrugger@...e.com, u-boot@...ts.denx.de, bmeng.cn@...il.com,
marex@...x.de, linux-kernel@...r.kernel.org
Cc: sjg@...omium.org, m.szyprowski@...sung.com, s.nawrocki@...sung.com,
mark.kettenis@...all.nl
Subject: Re: [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware
On Tue, 2020-05-05 at 18:26 +0200, Nicolas Saenz Julienne wrote:
> Newer revisions of the RPi4 need their xHCI chip, VL805, firmware to be
> loaded explicitly. Earlier versions didn't need that as they where using
> an EEPROM for that purpose. This series takes care of setting up the
> relevant infrastructure and run the firmware loading routine at the
> right moment.
>
> Note that this builds on top of Sylwester Nawrocki's "USB host support
> for Raspberry Pi 4 board" series.
>
> ---
Please don't forget about this series. The new 8GB RPi4 contains this HW design
change and USB will not work without it. See this discussion on the downstream
kernel github, where other OS/bootloaders are hitting the issue:
https://github.com/raspberrypi/firmware/issues/1402
Otherwise, the Linux version of this is already in linux-next:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/usb/host/pci-quirks.c?h=next-20200529&id=c65822fef4adc0ba40c37a47337376ce75f7a7bc
Regards,
Nicolas
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists