[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1588863647-17240-4-git-send-email-akashast@codeaurora.org>
Date: Thu, 7 May 2020 20:30:47 +0530
From: Akash Asthana <akashast@...eaurora.org>
To: robh+dt@...nel.org, gregkh@...uxfoundation.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, mgautam@...eaurora.org,
rojay@...eaurora.org, skakit@...eaurora.org, mka@...omium.org,
Akash Asthana <akashast@...eaurora.org>
Subject: [PATCH V6 3/3] dt-bindings: serial: Add binding for UART pin swap
Add documentation to support RX-TX & CTS-RTS GPIO pin swap in HW.
Signed-off-by: Akash Asthana <akashast@...eaurora.org>
---
Documentation/devicetree/bindings/serial/serial.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 53204d9..e657dd6 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -67,6 +67,12 @@ properties:
(wired and enabled by pinmux configuration). This depends on both the
UART hardware and the board wiring.
+ rx-tx-swap:
+ description: RX and TX pins are swapped.
+
+ cts-rts-swap:
+ description: CTS and RTS pins are swapped.
+
if:
required:
- uart-has-rtscts
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
Powered by blists - more mailing lists