[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200507214656.bh254nytzrzfk5hx@mobilestation>
Date: Fri, 8 May 2020 00:46:56 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Randy Dunlap <rdunlap@...radead.org>
CC: Serge Semin <fancer.lancer@...il.com>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Paul Burton <paulburton@...nel.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Arnd Bergmann <arnd@...db.de>,
Rob Herring <robh+dt@...nel.org>, <linux-mips@...r.kernel.org>,
<devicetree@...r.kernel.org>, Lee Jones <lee.jones@...aro.org>,
Michael Walle <michael@...le.cc>,
Lubomir Rintel <lkundrak@...sk>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Tony Xie <tony.xie@...k-chips.com>, Wen He <wen.he_1@....com>,
Mike Looijmans <mike.looijmans@...ic.nl>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Joel Stanley <joel@....id.au>, <linux-kernel@...r.kernel.org>,
<linux-clk@...r.kernel.org>
Subject: Re: [PATCH v2 3/4] clk: Add Baikal-T1 CCU PLLs driver
On Wed, May 06, 2020 at 03:27:57PM -0700, Randy Dunlap wrote:
> Hi,
>
> Typo(s):
>
> On 5/6/20 3:22 PM, Serge Semin wrote:
> > diff --git a/drivers/clk/baikal-t1/Kconfig b/drivers/clk/baikal-t1/Kconfig
> > new file mode 100644
> > index 000000000000..e1257af9f49e
> > --- /dev/null
> > +++ b/drivers/clk/baikal-t1/Kconfig
> > @@ -0,0 +1,30 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +config CLK_BAIKAL_T1
> > + bool "Baikal-T1 Clocks Control Unit interface"
> > + depends on (MIPS_BAIKAL_T1 && OF) || COMPILE_TEST
> > + default MIPS_BAIKAL_T1
> > + help
> > + Clocks Control Unit is the core of Baikal-T1 SoC System Controller
> > + responsible for the chip subsystems clocking and resetting. It
> > + consists of multiple global clock domains, which can be reset by
> > + means of the CCU control registers. These domains and devices placed
> > + in them are fed with clocks generated by a hierarchy of PLLs,
> > + configurable and fixed clock dividers. Enable this option to be able
> > + to select Baikal-T1 CCU PLLs and Dividers drivers.
> > +
> > +if CLK_BAIKAL_T1
> > +
> > +config CLK_BT1_CCU_PLL
> > + bool "Baikal-T1 CCU PLLs support"
> > + select MFD_SYSCON
> > + default MIPS_BAIKAL_T1
> > + help
> > + Enable this to support the PLLs embedded into the Baikal-T1 SoC
> > + System Controller. These are five PLLs placed at the root of the
> > + clocks hierarchy, right after an external reference osciallator
>
> oscillator
>
> > + (normally of 25MHz). They are used to generate high frequency
> > + signals, which are either directly wired to the consumers (like
> > + CPUs, DDR, etc) or passed over the clock dividers to be only then
>
> and while you are here:
>
> etc.)
Both will be fixed in v3. Thanks.
-Sergey
>
> > + used as an individual reference clock of a target device.
> > +
> > +endif
>
> thanks.
> --
> ~Randy
>
Powered by blists - more mailing lists