| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aa46a0f5-8774-d5e4-14f6-16d50a7aa310@ti.com>
Date: Thu, 7 May 2020 14:46:07 +0300
From: Tero Kristo <t-kristo@...com>
To: Grygorii Strashko <grygorii.strashko@...com>,
Santosh Shilimkar <ssantosh@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Lokesh Vutla <lokeshvutla@...com>, <devicetree@...r.kernel.org>
CC: Dave Gerlach <d-gerlach@...com>, Sekhar Nori <nsekhar@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Nishanth Menon <nm@...com>
Subject: Re: [PATCH v2 2/2] soc: ti: add k3 platforms chipid module driver
On 05/05/2020 22:34, Grygorii Strashko wrote:
> The Texas Instruments K3 Multicore SoC platforms have chipid module which
> is represented by CTRLMMR_xxx_JTAGID register and contains information
> about SoC id and revision.
> Bits:
> 31-28 VARIANT Device variant
> 27-12 PARTNO Part number
> 11-1 MFG Indicates TI as manufacturer (0x17)
> 1 Always 1
>
> This patch adds corresponding driver to identify the TI K3 SoC family and
> revision, and registers this information with the SoC bus. It is available
> under /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
>
> Identification is done by:
> - checking MFG to be TI ID
> - retrieving Device variant (revision)
> - retrieving Part number and convert it to the family
> - retrieving machine from DT "/model"
>
> Example J721E:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments K3 J721E SoC
> J721E
> SR1.0
>
> Example AM65x:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments AM654 Base Board
> AM65X
> SR1.0
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
> Reviewed-by: Lokesh Vutla <lokeshvutla@...com>
> ---
> drivers/soc/ti/Kconfig | 10 +++
> drivers/soc/ti/Makefile | 1 +
> drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 146 insertions(+)
> create mode 100644 drivers/soc/ti/k3-socinfo.c
>
> diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
> index 4486e055794c..e192fb788836 100644
> --- a/drivers/soc/ti/Kconfig
> +++ b/drivers/soc/ti/Kconfig
> @@ -91,6 +91,16 @@ config TI_K3_RINGACC
> and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
> If unsure, say N.
>
> +config TI_K3_SOCINFO
> + bool
> + depends on ARCH_K3 || COMPILE_TEST
> + select SOC_BUS
> + select MFD_SYSCON
> + help
> + Include support for the SoC bus socinfo for the TI K3 Multicore SoC
> + platforms to provide information about the SoC family and
> + variant to user space.
> +
> endif # SOC_TI
>
> config TI_SCI_INTA_MSI_DOMAIN
> diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
> index bec827937a5f..1110e5c98685 100644
> --- a/drivers/soc/ti/Makefile
> +++ b/drivers/soc/ti/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
> obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o
> obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o
> obj-$(CONFIG_TI_K3_RINGACC) += k3-ringacc.o
> +obj-$(CONFIG_TI_K3_SOCINFO) += k3-socinfo.o
> diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
> new file mode 100644
> index 000000000000..4c21e099d3c7
> --- /dev/null
> +++ b/drivers/soc/ti/k3-socinfo.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI K3 SoC info driver
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/sys_soc.h>
> +
> +#define CTRLMMR_WKUP_JTAGID_REG 0
> +/*
> + * Bits:
> + * 31-28 VARIANT Device variant
> + * 27-12 PARTNO Part number
> + * 11-1 MFG Indicates TI as manufacturer (0x17)
> + * 1 Always 1
> + */
> +#define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT (28)
> +#define CTRLMMR_WKUP_JTAGID_VARIANT_MASK GENMASK(31, 28)
> +
> +#define CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT (12)
> +#define CTRLMMR_WKUP_JTAGID_PARTNO_MASK GENMASK(27, 12)
> +
> +#define CTRLMMR_WKUP_JTAGID_MFG_SHIFT (1)
> +#define CTRLMMR_WKUP_JTAGID_MFG_MASK GENMASK(11, 1)
> +
> +#define CTRLMMR_WKUP_JTAGID_MFG_TI 0x17
> +
> +static const struct k3_soc_id {
> + unsigned int id;
> + const char *family_name;
> +} k3_soc_ids[] = {
> + { 0xBB5A, "AM65X" },
> + { 0xBB64, "J721E" },
> +};
> +
> +static int __init partno_to_names(unsigned int partno,
> + struct soc_device_attribute *soc_dev_attr)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
> + if (partno == k3_soc_ids[i].id) {
> + soc_dev_attr->family = k3_soc_ids[i].family_name;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int __init k3_chipinfo_init(void)
> +{
> + struct soc_device_attribute *soc_dev_attr;
> + struct soc_device *soc_dev;
> + struct device_node *node;
> + struct regmap *regmap;
> + u32 partno_id;
> + u32 variant;
> + u32 jtag_id;
> + u32 mfg;
> + int ret;
> +
> + node = of_find_compatible_node(NULL, NULL, "ti,am654-chipid");
> + if (!node)
> + return -ENODEV;
> +
> + regmap = device_node_to_regmap(node);
> + of_node_put(node);
> +
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + ret = regmap_read(regmap, CTRLMMR_WKUP_JTAGID_REG, &jtag_id);
> + if (ret < 0)
> + return ret;
> +
> + mfg = (jtag_id & CTRLMMR_WKUP_JTAGID_MFG_MASK) >>
> + CTRLMMR_WKUP_JTAGID_MFG_SHIFT;
> +
> + if (mfg != CTRLMMR_WKUP_JTAGID_MFG_TI) {
> + pr_err("Invalid MFG SoC\n");
> + return -ENODEV;
> + }
> +
> + variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
> + CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
> + variant++;
> +
> + partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
> + CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
> +
> + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> + if (!soc_dev_attr)
> + return -ENOMEM;
> +
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
kasprintf can fail.
-Tero
> +
> + ret = partno_to_names(partno_id, soc_dev_attr);
> + if (ret) {
> + pr_err("Unknown SoC JTAGID[0x%08X]\n", jtag_id);
> + ret = -ENODEV;
> + goto err;
> + }
> +
> + node = of_find_node_by_path("/");
> + of_property_read_string(node, "model", &soc_dev_attr->machine);
> + of_node_put(node);
> +
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + ret = PTR_ERR(soc_dev);
> + goto err;
> + }
> +
> + pr_info("Family:%s rev:%s JTAGID[0x%08x] Detected\n",
> + soc_dev_attr->family,
> + soc_dev_attr->revision, jtag_id);
> +
> + return 0;
> +
> +err:
> + kfree(soc_dev_attr->revision);
> + kfree(soc_dev_attr);
> + return ret;
> +}
> +
> +subsys_initcall(k3_chipinfo_init);
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists