[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200508123144.711327872@linuxfoundation.org>
Date: Fri, 8 May 2020 14:34:40 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH 4.4 289/312] ravb: Add missing free_irq() call to ravb_close()
From: Geert Uytterhoeven <geert+renesas@...der.be>
commit 7fa816b92c52e2c304f2ff6401e0d51e1d229ca5 upstream.
When reopening the network device on ra7795/salvator-x, e.g. after a
DHCP timeout:
IP-Config: Reopening network devices...
genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac)
ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac
IP-Config: Failed to open eth0
IP-Config: No network devices available
The "mismatch" is due to requesting an IRQ that is already in use,
while IRQF_PROBE_SHARED wasn't set.
However, the real cause is that ravb_close() doesn't release the R-Car
Gen3-specific secondary IRQ.
Add the missing free_irq() call to fix this.
Fixes: 22d4df8ff3a3cc72 ("ravb: Add support for r8a7795 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/ethernet/renesas/ravb_main.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1528,6 +1528,8 @@ static int ravb_close(struct net_device
priv->phydev = NULL;
}
+ if (priv->chip_id == RCAR_GEN3)
+ free_irq(priv->emac_irq, ndev);
free_irq(ndev->irq, ndev);
napi_disable(&priv->napi[RAVB_NC]);
Powered by blists - more mailing lists