linux-kernel - [PATCH net-next 5/5] net: hns3: disable auto-negotiation off with 1000M setting in ethtool

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1589016461-10130-6-git-send-email-tanhuazhong@huawei.com>
Date:   Sat, 9 May 2020 17:27:41 +0800
From:   Huazhong Tan <tanhuazhong@...wei.com>
To:     <davem@...emloft.net>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <salil.mehta@...wei.com>, <yisen.zhuang@...wei.com>,
        <linuxarm@...wei.com>, <kuba@...nel.org>,
        Yufeng Mo <moyufeng@...wei.com>,
        Huazhong Tan <tanhuazhong@...wei.com>
Subject: [PATCH net-next 5/5] net: hns3: disable auto-negotiation off with 1000M setting in ethtool

From: Yufeng Mo <moyufeng@...wei.com>

The 802.3 specification does not specify the behavior of
auto-negotiation off with 1000M in PHY. Therefore, some PHY
compatibility issues occur. This patch forbids the setting of
this unreasonable mode by ethtool in driver.

Signed-off-by: Yufeng Mo <moyufeng@...wei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@...wei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 1a105f2..6b1545f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -773,8 +773,13 @@ static int hns3_set_link_ksettings(struct net_device *netdev,
 		  cmd->base.autoneg, cmd->base.speed, cmd->base.duplex);
 
 	/* Only support ksettings_set for netdev with phy attached for now */
-	if (netdev->phydev)
+	if (netdev->phydev) {
+		if (cmd->base.speed == SPEED_1000 &&
+		    cmd->base.autoneg == AUTONEG_DISABLE)
+			return -EINVAL;
+
 		return phy_ethtool_ksettings_set(netdev->phydev, cmd);
+	}
 
 	if (handle->pdev->revision == 0x20)
 		return -EOPNOTSUPP;
-- 
2.7.4