[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFpE_uqiNQ22Fq9hDfb5pzMBdgmwgUbasEsEdXFkEOmq6A@mail.gmail.com>
Date: Wed, 13 May 2020 14:15:21 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
Cc: Adrian Hunter <adrian.hunter@...el.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] Revert "mmc: sdhci-xenon: add runtime pm support and
reimplement standby"
On Wed, 13 May 2020 at 11:47, Jisheng Zhang <Jisheng.Zhang@...aptics.com> wrote:
>
> This reverts commit a027b2c5fed78851e69fab395b02d127a7759fc7.
>
> The HW supports auto clock gating, so it's useless to do runtime pm
> in software.
Runtime PM isn't soley about clock gating. Moreover it manages the
"pltfm_host->clk", which means even if the controller supports auto
clock gating, gating/ungating the externally provided clock still
makes sense.
Kind regards
Uffe
>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
> ---
> drivers/mmc/host/sdhci-xenon.c | 87 +++++++---------------------------
> drivers/mmc/host/sdhci-xenon.h | 1 -
> 2 files changed, 16 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index 4703cd540c7f..85414e13e7ea 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -15,8 +15,6 @@
> #include <linux/ktime.h>
> #include <linux/module.h>
> #include <linux/of.h>
> -#include <linux/pm.h>
> -#include <linux/pm_runtime.h>
>
> #include "sdhci-pltfm.h"
> #include "sdhci-xenon.h"
> @@ -539,24 +537,13 @@ static int xenon_probe(struct platform_device *pdev)
> if (err)
> goto err_clk_axi;
>
> - pm_runtime_get_noresume(&pdev->dev);
> - pm_runtime_set_active(&pdev->dev);
> - pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> - pm_runtime_use_autosuspend(&pdev->dev);
> - pm_runtime_enable(&pdev->dev);
> - pm_suspend_ignore_children(&pdev->dev, 1);
> -
> err = sdhci_add_host(host);
> if (err)
> goto remove_sdhc;
>
> - pm_runtime_put_autosuspend(&pdev->dev);
> -
> return 0;
>
> remove_sdhc:
> - pm_runtime_disable(&pdev->dev);
> - pm_runtime_put_noidle(&pdev->dev);
> xenon_sdhc_unprepare(host);
> err_clk_axi:
> clk_disable_unprepare(priv->axi_clk);
> @@ -573,10 +560,6 @@ static int xenon_remove(struct platform_device *pdev)
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>
> - pm_runtime_get_sync(&pdev->dev);
> - pm_runtime_disable(&pdev->dev);
> - pm_runtime_put_noidle(&pdev->dev);
> -
> sdhci_remove_host(host, 0);
>
> xenon_sdhc_unprepare(host);
> @@ -593,78 +576,40 @@ static int xenon_suspend(struct device *dev)
> {
> struct sdhci_host *host = dev_get_drvdata(dev);
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> - struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> int ret;
>
> - ret = pm_runtime_force_suspend(dev);
> + ret = sdhci_suspend_host(host);
> + if (ret)
> + return ret;
>
> - priv->restore_needed = true;
> + clk_disable_unprepare(pltfm_host->clk);
> return ret;
> }
> -#endif
>
> -#ifdef CONFIG_PM
> -static int xenon_runtime_suspend(struct device *dev)
> +static int xenon_resume(struct device *dev)
> {
> struct sdhci_host *host = dev_get_drvdata(dev);
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> - struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> int ret;
>
> - ret = sdhci_runtime_suspend_host(host);
> + ret = clk_prepare_enable(pltfm_host->clk);
> if (ret)
> return ret;
>
> - if (host->tuning_mode != SDHCI_TUNING_MODE_3)
> - mmc_retune_needed(host->mmc);
> -
> - clk_disable_unprepare(pltfm_host->clk);
> /*
> - * Need to update the priv->clock here, or when runtime resume
> - * back, phy don't aware the clock change and won't adjust phy
> - * which will cause cmd err
> + * If SoCs power off the entire Xenon, registers setting will
> + * be lost.
> + * Re-configure Xenon specific register to enable current SDHC
> */
> - priv->clock = 0;
> - return 0;
> -}
> -
> -static int xenon_runtime_resume(struct device *dev)
> -{
> - struct sdhci_host *host = dev_get_drvdata(dev);
> - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> - struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> - int ret;
> -
> - ret = clk_prepare_enable(pltfm_host->clk);
> - if (ret) {
> - dev_err(dev, "can't enable mainck\n");
> + ret = xenon_sdhc_prepare(host);
> + if (ret)
> return ret;
> - }
> -
> - if (priv->restore_needed) {
> - ret = xenon_sdhc_prepare(host);
> - if (ret)
> - goto out;
> - priv->restore_needed = false;
> - }
>
> - ret = sdhci_runtime_resume_host(host, 0);
> - if (ret)
> - goto out;
> - return 0;
> -out:
> - clk_disable_unprepare(pltfm_host->clk);
> - return ret;
> + return sdhci_resume_host(host);
> }
> -#endif /* CONFIG_PM */
> -
> -static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(xenon_suspend,
> - pm_runtime_force_resume)
> - SET_RUNTIME_PM_OPS(xenon_runtime_suspend,
> - xenon_runtime_resume,
> - NULL)
> -};
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(xenon_pmops, xenon_suspend, xenon_resume);
>
> static const struct of_device_id sdhci_xenon_dt_ids[] = {
> { .compatible = "marvell,armada-ap806-sdhci",},
> @@ -678,7 +623,7 @@ static struct platform_driver sdhci_xenon_driver = {
> .driver = {
> .name = "xenon-sdhci",
> .of_match_table = sdhci_xenon_dt_ids,
> - .pm = &sdhci_xenon_dev_pm_ops,
> + .pm = &xenon_pmops,
> },
> .probe = xenon_probe,
> .remove = xenon_remove,
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> index 593b82d7b68a..2b9b96e51261 100644
> --- a/drivers/mmc/host/sdhci-xenon.h
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -89,7 +89,6 @@ struct xenon_priv {
> */
> void *phy_params;
> struct xenon_emmc_phy_regs *emmc_phy_regs;
> - bool restore_needed;
> };
>
> int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
> --
> 2.26.2
>
Powered by blists - more mailing lists