linux-kernel - [PATCH 2/5] power: reset: ocelot: Add support for Sparx5

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200513130842.24847-3-lars.povlsen@microchip.com>
Date:   Wed, 13 May 2020 15:08:39 +0200
From:   Lars Povlsen <lars.povlsen@...rochip.com>
To:     Sebastian Reichel <sre@...nel.org>, SoC Team <soc@...nel.org>
CC:     Lars Povlsen <lars.povlsen@...rochip.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
        <linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 2/5] power: reset: ocelot: Add support for Sparx5

This adds reset support for Sparx5 in the ocelot-reset driver.

Signed-off-by: Lars Povlsen <lars.povlsen@...rochip.com>
---
 drivers/power/reset/Kconfig        |  3 +-
 drivers/power/reset/ocelot-reset.c | 55 +++++++++++++++++++++++-------
 2 files changed, 44 insertions(+), 14 deletions(-)

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 8903803020805..9ecafbf9e64a6 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -118,10 +118,9 @@ config POWER_RESET_QCOM_PON
 
 config POWER_RESET_OCELOT_RESET
 	bool "Microsemi Ocelot reset driver"
-	depends on MSCC_OCELOT || COMPILE_TEST
 	select MFD_SYSCON
 	help
-	  This driver supports restart for Microsemi Ocelot SoC.
+	  This driver supports restart for Microsemi Ocelot SoC and similar.
 
 config POWER_RESET_PIIX4_POWEROFF
 	tristate "Intel PIIX4 power-off driver"
diff --git a/drivers/power/reset/ocelot-reset.c b/drivers/power/reset/ocelot-reset.c
index 419952c61fd01..f74e1dbb4ba36 100644
--- a/drivers/power/reset/ocelot-reset.c
+++ b/drivers/power/reset/ocelot-reset.c
@@ -15,15 +15,20 @@
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 
+struct reset_props {
+	const char *syscon;
+	u32 protect_reg;
+	u32 vcore_protect;
+	u32 if_si_owner_bit;
+};
+
 struct ocelot_reset_context {
 	void __iomem *base;
 	struct regmap *cpu_ctrl;
+	const struct reset_props *props;
 	struct notifier_block restart_handler;
 };
 
-#define ICPU_CFG_CPU_SYSTEM_CTRL_RESET 0x20
-#define CORE_RST_PROTECT BIT(2)
-
 #define SOFT_CHIP_RST BIT(0)
 
 #define ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
@@ -31,7 +36,6 @@ struct ocelot_reset_context {
 #define IF_SI_OWNER_SISL			0
 #define IF_SI_OWNER_SIBM			1
 #define IF_SI_OWNER_SIMC			2
-#define IF_SI_OWNER_OFFSET			4
 
 static int ocelot_restart_handle(struct notifier_block *this,
 				 unsigned long mode, void *cmd)
@@ -39,15 +43,18 @@ static int ocelot_restart_handle(struct notifier_block *this,
 	struct ocelot_reset_context *ctx = container_of(this, struct
 							ocelot_reset_context,
 							restart_handler);
+	u32 if_si_owner_bit = ctx->props->if_si_owner_bit;
 
 	/* Make sure the core is not protected from reset */
-	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_RESET,
-			   CORE_RST_PROTECT, 0);
+	regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg,
+			   ctx->props->vcore_protect, 0);
 
 	/* Make the SI back to boot mode */
 	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL,
-			   IF_SI_OWNER_MASK << IF_SI_OWNER_OFFSET,
-			   IF_SI_OWNER_SIBM << IF_SI_OWNER_OFFSET);
+			   IF_SI_OWNER_MASK << if_si_owner_bit,
+			   IF_SI_OWNER_SIBM << if_si_owner_bit);
+
+	pr_emerg("Resetting SoC\n");
 
 	writel(SOFT_CHIP_RST, ctx->base);
 
@@ -72,9 +79,13 @@ static int ocelot_reset_probe(struct platform_device *pdev)
 	if (IS_ERR(ctx->base))
 		return PTR_ERR(ctx->base);
 
-	ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
-	if (IS_ERR(ctx->cpu_ctrl))
+	ctx->props = device_get_match_data(dev);
+
+	ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible(ctx->props->syscon);
+	if (IS_ERR(ctx->cpu_ctrl)) {
+		dev_err(dev, "No syscon map: %s\n", ctx->props->syscon);
 		return PTR_ERR(ctx->cpu_ctrl);
+	}
 
 	ctx->restart_handler.notifier_call = ocelot_restart_handle;
 	ctx->restart_handler.priority = 192;
@@ -85,9 +96,29 @@ static int ocelot_reset_probe(struct platform_device *pdev)
 	return err;
 }
 
+static const struct reset_props reset_props_ocelot = {
+	.syscon		 = "mscc,ocelot-cpu-syscon",
+	.protect_reg     = 0x20,
+	.vcore_protect   = BIT(2),
+	.if_si_owner_bit = 4,
+};
+
+static const struct reset_props reset_props_sparx5 = {
+	.syscon		 = "microchip,sparx5-cpu-syscon",
+	.protect_reg     = 0x84,
+	.vcore_protect   = BIT(10),
+	.if_si_owner_bit = 6,
+};
+
 static const struct of_device_id ocelot_reset_of_match[] = {
-	{ .compatible = "mscc,ocelot-chip-reset" },
-	{}
+	{
+		.compatible = "mscc,ocelot-chip-reset",
+		.data = &reset_props_ocelot
+	}, {
+		.compatible = "microchip,sparx5-chip-reset",
+		.data = &reset_props_sparx5
+	},
+	{ /*sentinel*/ }
 };
 
 static struct platform_driver ocelot_reset_driver = {
-- 
2.26.2