[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200523195131.GN610998@lunn.ch>
Date: Sat, 23 May 2020 21:51:31 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Russell King - ARM Linux admin <linux@...linux.org.uk>
Cc: Jeremy Linton <jeremy.linton@....com>, netdev@...r.kernel.org,
davem@...emloft.net, f.fainelli@...il.com, hkallweit1@...il.com,
madalin.bucur@....nxp.com, calvin.johnson@....nxp.com,
linux-kernel@...r.kernel.org
Subject: Re: [RFC 03/11] net: phy: refactor c45 phy identification sequence
> > static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
> > struct phy_c45_device_ids *c45_ids) {
> > - int phy_reg;
> > - int i, reg_addr;
> > + int ret;
> > + int i;
> > const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
> > u32 *devs = &c45_ids->devices_in_package;
>
> I feel a "reverse christmas tree" complaint brewing... yes, the original
> code didn't follow it. Maybe a tidy up while touching this code?
At minimum, a patch should not make it worse. ret and i should clearly
be after devs.
> > static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
> > bool is_c45, struct phy_c45_device_ids *c45_ids)
> > {
> > - int phy_reg;
> > + int ret;
> >
> > if (is_c45)
> > return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
> >
> > - /* Grab the bits from PHYIR1, and put them in the upper half */
> > - phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
> > - if (phy_reg < 0) {
> > + ret = _get_phy_id(bus, addr, 0, phy_id, false);
> > + if (ret < 0) {
> > /* returning -ENODEV doesn't stop bus scanning */
> > - return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO;
> > + return (ret == -EIO || ret == -ENODEV) ? -ENODEV : -EIO;
>
> Since ret will only ever be -EIO here, this can only ever return
> -ENODEV, which is a functional change in the code (probably unintended.)
> Nevertheless, it's likely introducing a bug if the intention is for
> some other return from mdiobus_read() to be handled differently.
>
> > }
> >
> > - *phy_id = phy_reg << 16;
> > -
> > - /* Grab the bits from PHYIR2, and put them in the lower half */
> > - phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
> > - if (phy_reg < 0)
> > - return -EIO;
>
> ... whereas this one always returns -EIO on any error.
>
> So, I think you have the potential in this patch to introduce a subtle
> change of behaviour, which may lead to problems - have you closely
> analysed why the code was the way it was, and whether your change of
> behaviour is actually valid?
I could be remembering this wrongly, but i think this is to do with
orion_mdio_xsmi_read() returning -ENODEV, not 0xffffffffff, if there
is no device on the bus at the given address. -EIO is fatal to the
scan, everything stops with the assumption the bus is broken. -ENODEV
should not be fatal to the scan.
Andrew
Powered by blists - more mailing lists