| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200527185711.21331-2-jmaneyrol@invensense.com>
Date: Wed, 27 May 2020 20:57:00 +0200
From: Jean-Baptiste Maneyrol <jmaneyrol@...ensense.com>
To: jic23@...nel.org, robh+dt@...nel.org, robh@...nel.org,
mchehab+huawei@...nel.org, davem@...emloft.net,
gregkh@...uxfoundation.org
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Jean-Baptiste Maneyrol <jmaneyrol@...ensense.com>
Subject: [PATCH v2 01/12] iio: imu: inv_icm42600: add core of new inv_icm42600 driver
Core component of a new driver for InvenSense ICM-426xx devices.
It includes registers definition, main probe/setup, and device
utility functions.
ICM-426xx devices are latest generation of 6-axis IMU,
gyroscope+accelerometer and temperature sensor. This device
includes a 2K FIFO, supports I2C/I3C/SPI, and provides
intelligent motion features like pedometer, tilt detection,
and tap detection.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@...ensense.com>
---
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 372 ++++++++++
.../iio/imu/inv_icm42600/inv_icm42600_core.c | 635 ++++++++++++++++++
2 files changed, 1007 insertions(+)
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600.h
create mode 100644 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
new file mode 100644
index 000000000000..14c8ef152418
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -0,0 +1,372 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#ifndef INV_ICM42600_H_
+#define INV_ICM42600_H_
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm.h>
+#include <linux/iio/iio.h>
+
+enum inv_icm42600_chip {
+ INV_CHIP_ICM42600,
+ INV_CHIP_ICM42602,
+ INV_CHIP_ICM42605,
+ INV_CHIP_ICM42622,
+ INV_CHIP_NB,
+};
+
+/* serial bus slew rates */
+enum inv_icm42600_slew_rate {
+ INV_ICM42600_SLEW_RATE_20_60NS,
+ INV_ICM42600_SLEW_RATE_12_36NS,
+ INV_ICM42600_SLEW_RATE_6_18NS,
+ INV_ICM42600_SLEW_RATE_4_12NS,
+ INV_ICM42600_SLEW_RATE_2_6NS,
+ INV_ICM42600_SLEW_RATE_INF_2NS,
+};
+
+enum inv_icm42600_sensor_mode {
+ INV_ICM42600_SENSOR_MODE_OFF,
+ INV_ICM42600_SENSOR_MODE_STANDBY,
+ INV_ICM42600_SENSOR_MODE_LOW_POWER,
+ INV_ICM42600_SENSOR_MODE_LOW_NOISE,
+ INV_ICM42600_SENSOR_MODE_NB,
+};
+
+/* gyroscope fullscale values */
+enum inv_icm42600_gyro_fs {
+ INV_ICM42600_GYRO_FS_2000DPS,
+ INV_ICM42600_GYRO_FS_1000DPS,
+ INV_ICM42600_GYRO_FS_500DPS,
+ INV_ICM42600_GYRO_FS_250DPS,
+ INV_ICM42600_GYRO_FS_125DPS,
+ INV_ICM42600_GYRO_FS_62_5DPS,
+ INV_ICM42600_GYRO_FS_31_25DPS,
+ INV_ICM42600_GYRO_FS_15_625DPS,
+ INV_ICM42600_GYRO_FS_NB,
+};
+
+/* accelerometer fullscale values */
+enum inv_icm42600_accel_fs {
+ INV_ICM42600_ACCEL_FS_16G,
+ INV_ICM42600_ACCEL_FS_8G,
+ INV_ICM42600_ACCEL_FS_4G,
+ INV_ICM42600_ACCEL_FS_2G,
+ INV_ICM42600_ACCEL_FS_NB,
+};
+
+/* ODR suffixed by LN or LP are Low-Noise or Low-Power mode only */
+enum inv_icm42600_odr {
+ INV_ICM42600_ODR_8KHZ_LN = 3,
+ INV_ICM42600_ODR_4KHZ_LN,
+ INV_ICM42600_ODR_2KHZ_LN,
+ INV_ICM42600_ODR_1KHZ_LN,
+ INV_ICM42600_ODR_200HZ,
+ INV_ICM42600_ODR_100HZ,
+ INV_ICM42600_ODR_50HZ,
+ INV_ICM42600_ODR_25HZ,
+ INV_ICM42600_ODR_12_5HZ,
+ INV_ICM42600_ODR_6_25HZ_LP,
+ INV_ICM42600_ODR_3_125HZ_LP,
+ INV_ICM42600_ODR_1_5625HZ_LP,
+ INV_ICM42600_ODR_500HZ,
+ INV_ICM42600_ODR_NB,
+};
+
+enum inv_icm42600_filter {
+ /* Low-Noise mode sensor data filter (3rd order filter by default) */
+ INV_ICM42600_FILTER_BW_ODR_DIV_2,
+
+ /* Low-Power mode sensor data filter (averaging) */
+ INV_ICM42600_FILTER_AVG_1X = 1,
+ INV_ICM42600_FILTER_AVG_16X = 6,
+};
+
+struct inv_icm42600_sensor_conf {
+ int mode;
+ int fs;
+ int odr;
+ int filter;
+};
+#define INV_ICM42600_SENSOR_CONF_INIT {-1, -1, -1, -1}
+
+struct inv_icm42600_conf {
+ struct inv_icm42600_sensor_conf gyro;
+ struct inv_icm42600_sensor_conf accel;
+ bool temp_en;
+};
+
+struct inv_icm42600_suspended {
+ enum inv_icm42600_sensor_mode gyro;
+ enum inv_icm42600_sensor_mode accel;
+ bool temp;
+};
+
+/**
+ * struct inv_icm42600_state - driver state variables
+ * @lock: lock for serializing multiple registers access.
+ * @chip: chip identifier.
+ * @name: chip name.
+ * @map: regmap pointer.
+ * @vdd_supply: VDD voltage regulator for the chip.
+ * @vddio_supply: I/O voltage regulator for the chip.
+ * @orientation: sensor chip orientation relative to main hardware.
+ * @conf: chip sensors configurations.
+ * @suspended: suspended sensors configuration.
+ */
+struct inv_icm42600_state {
+ struct mutex lock;
+ enum inv_icm42600_chip chip;
+ const char *name;
+ struct regmap *map;
+ struct regulator *vdd_supply;
+ struct regulator *vddio_supply;
+ struct iio_mount_matrix orientation;
+ struct inv_icm42600_conf conf;
+ struct inv_icm42600_suspended suspended;
+};
+
+/* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
+
+/* Bank selection register, available in all banks */
+#define INV_ICM42600_REG_BANK_SEL 0x76
+#define INV_ICM42600_BANK_SEL_MASK GENMASK(2, 0)
+
+/* User bank 0 (MSB 0x00) */
+#define INV_ICM42600_REG_DEVICE_CONFIG 0x0011
+#define INV_ICM42600_DEVICE_CONFIG_SOFT_RESET BIT(0)
+
+#define INV_ICM42600_REG_DRIVE_CONFIG 0x0013
+#define INV_ICM42600_DRIVE_CONFIG_I2C_MASK GENMASK(5, 3)
+#define INV_ICM42600_DRIVE_CONFIG_I2C(_rate) \
+ FIELD_PREP(INV_ICM42600_DRIVE_CONFIG_I2C_MASK, (_rate))
+#define INV_ICM42600_DRIVE_CONFIG_SPI_MASK GENMASK(2, 0)
+#define INV_ICM42600_DRIVE_CONFIG_SPI(_rate) \
+ FIELD_PREP(INV_ICM42600_DRIVE_CONFIG_SPI_MASK, (_rate))
+
+#define INV_ICM42600_REG_INT_CONFIG 0x0014
+#define INV_ICM42600_INT_CONFIG_INT2_LATCHED BIT(5)
+#define INV_ICM42600_INT_CONFIG_INT2_PUSH_PULL BIT(4)
+#define INV_ICM42600_INT_CONFIG_INT2_ACTIVE_HIGH BIT(3)
+#define INV_ICM42600_INT_CONFIG_INT2_ACTIVE_LOW 0x00
+#define INV_ICM42600_INT_CONFIG_INT1_LATCHED BIT(2)
+#define INV_ICM42600_INT_CONFIG_INT1_PUSH_PULL BIT(1)
+#define INV_ICM42600_INT_CONFIG_INT1_ACTIVE_HIGH BIT(0)
+#define INV_ICM42600_INT_CONFIG_INT1_ACTIVE_LOW 0x00
+
+#define INV_ICM42600_REG_FIFO_CONFIG 0x0016
+#define INV_ICM42600_FIFO_CONFIG_MASK GENMASK(7, 6)
+#define INV_ICM42600_FIFO_CONFIG_BYPASS \
+ FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 0)
+#define INV_ICM42600_FIFO_CONFIG_STREAM \
+ FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 1)
+#define INV_ICM42600_FIFO_CONFIG_STOP_ON_FULL \
+ FIELD_PREP(INV_ICM42600_FIFO_CONFIG_MASK, 2)
+
+/* all sensor data are 16 bits (2 registers wide) in big-endian */
+#define INV_ICM42600_REG_TEMP_DATA 0x001D
+#define INV_ICM42600_REG_ACCEL_DATA_X 0x001F
+#define INV_ICM42600_REG_ACCEL_DATA_Y 0x0021
+#define INV_ICM42600_REG_ACCEL_DATA_Z 0x0023
+#define INV_ICM42600_REG_GYRO_DATA_X 0x0025
+#define INV_ICM42600_REG_GYRO_DATA_Y 0x0027
+#define INV_ICM42600_REG_GYRO_DATA_Z 0x0029
+#define INV_ICM42600_DATA_INVALID -32768
+
+#define INV_ICM42600_REG_INT_STATUS 0x002D
+#define INV_ICM42600_INT_STATUS_UI_FSYNC BIT(6)
+#define INV_ICM42600_INT_STATUS_PLL_RDY BIT(5)
+#define INV_ICM42600_INT_STATUS_RESET_DONE BIT(4)
+#define INV_ICM42600_INT_STATUS_DATA_RDY BIT(3)
+#define INV_ICM42600_INT_STATUS_FIFO_THS BIT(2)
+#define INV_ICM42600_INT_STATUS_FIFO_FULL BIT(1)
+#define INV_ICM42600_INT_STATUS_AGC_RDY BIT(0)
+
+/*
+ * FIFO access registers
+ * FIFO count is 16 bits (2 registers) big-endian
+ * FIFO data is a continuous read register to read FIFO content
+ */
+#define INV_ICM42600_REG_FIFO_COUNT 0x002E
+#define INV_ICM42600_REG_FIFO_DATA 0x0030
+
+#define INV_ICM42600_REG_SIGNAL_PATH_RESET 0x004B
+#define INV_ICM42600_SIGNAL_PATH_RESET_DMP_INIT_EN BIT(6)
+#define INV_ICM42600_SIGNAL_PATH_RESET_DMP_MEM_RESET BIT(5)
+#define INV_ICM42600_SIGNAL_PATH_RESET_RESET BIT(3)
+#define INV_ICM42600_SIGNAL_PATH_RESET_TMST_STROBE BIT(2)
+#define INV_ICM42600_SIGNAL_PATH_RESET_FIFO_FLUSH BIT(1)
+
+/* default configuration: all data big-endian and fifo count in bytes */
+#define INV_ICM42600_REG_INTF_CONFIG0 0x004C
+#define INV_ICM42600_INTF_CONFIG0_FIFO_HOLD_LAST_DATA BIT(7)
+#define INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_REC BIT(6)
+#define INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_ENDIAN BIT(5)
+#define INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN BIT(4)
+#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK GENMASK(1, 0)
+#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS \
+ FIELD_PREP(INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK, 2)
+#define INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_I2C_DIS \
+ FIELD_PREP(INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK, 3)
+
+#define INV_ICM42600_REG_INTF_CONFIG1 0x004D
+#define INV_ICM42600_INTF_CONFIG1_ACCEL_LP_CLK_RC BIT(3)
+
+#define INV_ICM42600_REG_PWR_MGMT0 0x004E
+#define INV_ICM42600_PWR_MGMT0_TEMP_DIS BIT(5)
+#define INV_ICM42600_PWR_MGMT0_IDLE BIT(4)
+#define INV_ICM42600_PWR_MGMT0_GYRO(_mode) \
+ FIELD_PREP(GENMASK(3, 2), (_mode))
+#define INV_ICM42600_PWR_MGMT0_ACCEL(_mode) \
+ FIELD_PREP(GENMASK(1, 0), (_mode))
+
+#define INV_ICM42600_REG_GYRO_CONFIG0 0x004F
+#define INV_ICM42600_GYRO_CONFIG0_FS(_fs) \
+ FIELD_PREP(GENMASK(7, 5), (_fs))
+#define INV_ICM42600_GYRO_CONFIG0_ODR(_odr) \
+ FIELD_PREP(GENMASK(3, 0), (_odr))
+
+#define INV_ICM42600_REG_ACCEL_CONFIG0 0x0050
+#define INV_ICM42600_ACCEL_CONFIG0_FS(_fs) \
+ FIELD_PREP(GENMASK(7, 5), (_fs))
+#define INV_ICM42600_ACCEL_CONFIG0_ODR(_odr) \
+ FIELD_PREP(GENMASK(3, 0), (_odr))
+
+#define INV_ICM42600_REG_GYRO_ACCEL_CONFIG0 0x0052
+#define INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(_f) \
+ FIELD_PREP(GENMASK(7, 4), (_f))
+#define INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(_f) \
+ FIELD_PREP(GENMASK(3, 0), (_f))
+
+#define INV_ICM42600_REG_TMST_CONFIG 0x0054
+#define INV_ICM42600_TMST_CONFIG_MASK GENMASK(4, 0)
+#define INV_ICM42600_TMST_CONFIG_TMST_TO_REGS_EN BIT(4)
+#define INV_ICM42600_TMST_CONFIG_TMST_RES_16US BIT(3)
+#define INV_ICM42600_TMST_CONFIG_TMST_DELTA_EN BIT(2)
+#define INV_ICM42600_TMST_CONFIG_TMST_FSYNC_EN BIT(1)
+#define INV_ICM42600_TMST_CONFIG_TMST_EN BIT(0)
+
+#define INV_ICM42600_REG_FIFO_CONFIG1 0x005F
+#define INV_ICM42600_FIFO_CONFIG1_RESUME_PARTIAL_RD BIT(6)
+#define INV_ICM42600_FIFO_CONFIG1_WM_GT_TH BIT(5)
+#define INV_ICM42600_FIFO_CONFIG1_TMST_FSYNC_EN BIT(3)
+#define INV_ICM42600_FIFO_CONFIG1_TEMP_EN BIT(2)
+#define INV_ICM42600_FIFO_CONFIG1_GYRO_EN BIT(1)
+#define INV_ICM42600_FIFO_CONFIG1_ACCEL_EN BIT(0)
+
+/* FIFO watermark is 16 bits (2 registers wide) in little-endian */
+#define INV_ICM42600_REG_FIFO_WATERMARK 0x0060
+#define INV_ICM42600_FIFO_WATERMARK_VAL(_wm) \
+ cpu_to_le16((_wm) & GENMASK(11, 0))
+/* FIFO is 2048 bytes, let 12 samples for reading latency */
+#define INV_ICM42600_FIFO_WATERMARK_MAX (2048 - 12 * 16)
+
+#define INV_ICM42600_REG_INT_CONFIG1 0x0064
+#define INV_ICM42600_INT_CONFIG1_TPULSE_DURATION BIT(6)
+#define INV_ICM42600_INT_CONFIG1_TDEASSERT_DISABLE BIT(5)
+#define INV_ICM42600_INT_CONFIG1_ASYNC_RESET BIT(4)
+
+#define INV_ICM42600_REG_INT_SOURCE0 0x0065
+#define INV_ICM42600_INT_SOURCE0_UI_FSYNC_INT1_EN BIT(6)
+#define INV_ICM42600_INT_SOURCE0_PLL_RDY_INT1_EN BIT(5)
+#define INV_ICM42600_INT_SOURCE0_RESET_DONE_INT1_EN BIT(4)
+#define INV_ICM42600_INT_SOURCE0_UI_DRDY_INT1_EN BIT(3)
+#define INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN BIT(2)
+#define INV_ICM42600_INT_SOURCE0_FIFO_FULL_INT1_EN BIT(1)
+#define INV_ICM42600_INT_SOURCE0_UI_AGC_RDY_INT1_EN BIT(0)
+
+#define INV_ICM42600_REG_WHOAMI 0x0075
+#define INV_ICM42600_WHOAMI_ICM42600 0x40
+#define INV_ICM42600_WHOAMI_ICM42602 0x41
+#define INV_ICM42600_WHOAMI_ICM42605 0x42
+#define INV_ICM42600_WHOAMI_ICM42622 0x46
+
+/* User bank 1 (MSB 0x10) */
+#define INV_ICM42600_REG_SENSOR_CONFIG0 0x1003
+#define INV_ICM42600_SENSOR_CONFIG0_ZG_DISABLE BIT(5)
+#define INV_ICM42600_SENSOR_CONFIG0_YG_DISABLE BIT(4)
+#define INV_ICM42600_SENSOR_CONFIG0_XG_DISABLE BIT(3)
+#define INV_ICM42600_SENSOR_CONFIG0_ZA_DISABLE BIT(2)
+#define INV_ICM42600_SENSOR_CONFIG0_YA_DISABLE BIT(1)
+#define INV_ICM42600_SENSOR_CONFIG0_XA_DISABLE BIT(0)
+
+/* Timestamp value is 20 bits (3 registers) in little-endian */
+#define INV_ICM42600_REG_TMSTVAL 0x1062
+#define INV_ICM42600_TMSTVAL_MASK GENMASK(19, 0)
+
+#define INV_ICM42600_REG_INTF_CONFIG4 0x107A
+#define INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY BIT(6)
+#define INV_ICM42600_INTF_CONFIG4_SPI_AP_4WIRE BIT(1)
+
+#define INV_ICM42600_REG_INTF_CONFIG6 0x107C
+#define INV_ICM42600_INTF_CONFIG6_MASK GENMASK(4, 0)
+#define INV_ICM42600_INTF_CONFIG6_I3C_EN BIT(4)
+#define INV_ICM42600_INTF_CONFIG6_I3C_IBI_BYTE_EN BIT(3)
+#define INV_ICM42600_INTF_CONFIG6_I3C_IBI_EN BIT(2)
+#define INV_ICM42600_INTF_CONFIG6_I3C_DDR_EN BIT(1)
+#define INV_ICM42600_INTF_CONFIG6_I3C_SDR_EN BIT(0)
+
+/* User bank 4 (MSB 0x40) */
+#define INV_ICM42600_REG_INT_SOURCE8 0x404F
+#define INV_ICM42600_INT_SOURCE8_FSYNC_IBI_EN BIT(5)
+#define INV_ICM42600_INT_SOURCE8_PLL_RDY_IBI_EN BIT(4)
+#define INV_ICM42600_INT_SOURCE8_UI_DRDY_IBI_EN BIT(3)
+#define INV_ICM42600_INT_SOURCE8_FIFO_THS_IBI_EN BIT(2)
+#define INV_ICM42600_INT_SOURCE8_FIFO_FULL_IBI_EN BIT(1)
+#define INV_ICM42600_INT_SOURCE8_AGC_RDY_IBI_EN BIT(0)
+
+#define INV_ICM42600_REG_OFFSET_USER0 0x4077
+#define INV_ICM42600_REG_OFFSET_USER1 0x4078
+#define INV_ICM42600_REG_OFFSET_USER2 0x4079
+#define INV_ICM42600_REG_OFFSET_USER3 0x407A
+#define INV_ICM42600_REG_OFFSET_USER4 0x407B
+#define INV_ICM42600_REG_OFFSET_USER5 0x407C
+#define INV_ICM42600_REG_OFFSET_USER6 0x407D
+#define INV_ICM42600_REG_OFFSET_USER7 0x407E
+#define INV_ICM42600_REG_OFFSET_USER8 0x407F
+
+/* Sleep times required by the driver */
+#define INV_ICM42600_POWER_UP_TIME_MS 100
+#define INV_ICM42600_RESET_TIME_MS 1
+#define INV_ICM42600_ACCEL_STARTUP_TIME_MS 20
+#define INV_ICM42600_GYRO_STARTUP_TIME_MS 60
+#define INV_ICM42600_GYRO_STOP_TIME_MS 150
+#define INV_ICM42600_TEMP_STARTUP_TIME_MS 14
+#define INV_ICM42600_SUSPEND_DELAY_MS 2000
+
+typedef int (*inv_icm42600_bus_setup)(struct inv_icm42600_state *);
+
+extern const struct regmap_config inv_icm42600_regmap_config;
+extern const struct dev_pm_ops inv_icm42600_pm_ops;
+
+const struct iio_mount_matrix *
+inv_icm42600_get_mount_matrix(const struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan);
+
+uint32_t inv_icm42600_odr_to_period(enum inv_icm42600_odr odr);
+
+int inv_icm42600_set_accel_conf(struct inv_icm42600_state *st,
+ struct inv_icm42600_sensor_conf *conf,
+ unsigned int *sleep_ms);
+
+int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st,
+ struct inv_icm42600_sensor_conf *conf,
+ unsigned int *sleep_ms);
+
+int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,
+ unsigned int *sleep_ms);
+
+int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
+ unsigned int writeval, unsigned int *readval);
+
+int inv_icm42600_core_probe(struct regmap *regmap, int chip,
+ inv_icm42600_bus_setup bus_setup);
+
+#endif
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
new file mode 100644
index 000000000000..81b171d6782c
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -0,0 +1,635 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Invensense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+
+#include "inv_icm42600.h"
+
+static const struct regmap_range_cfg inv_icm42600_regmap_ranges[] = {
+ {
+ .name = "user banks",
+ .range_min = 0x0000,
+ .range_max = 0x4FFF,
+ .selector_reg = INV_ICM42600_REG_BANK_SEL,
+ .selector_mask = INV_ICM42600_BANK_SEL_MASK,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 0x1000,
+ },
+};
+
+const struct regmap_config inv_icm42600_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x4FFF,
+ .ranges = inv_icm42600_regmap_ranges,
+ .num_ranges = ARRAY_SIZE(inv_icm42600_regmap_ranges),
+};
+EXPORT_SYMBOL_GPL(inv_icm42600_regmap_config);
+
+struct inv_icm42600_hw {
+ uint8_t whoami;
+ const char *name;
+ const struct inv_icm42600_conf *conf;
+};
+
+/* chip initial default configuration */
+static const struct inv_icm42600_conf inv_icm42600_default_conf = {
+ .gyro = {
+ .mode = INV_ICM42600_SENSOR_MODE_OFF,
+ .fs = INV_ICM42600_GYRO_FS_2000DPS,
+ .odr = INV_ICM42600_ODR_50HZ,
+ .filter = INV_ICM42600_FILTER_BW_ODR_DIV_2,
+ },
+ .accel = {
+ .mode = INV_ICM42600_SENSOR_MODE_OFF,
+ .fs = INV_ICM42600_ACCEL_FS_16G,
+ .odr = INV_ICM42600_ODR_50HZ,
+ .filter = INV_ICM42600_FILTER_BW_ODR_DIV_2,
+ },
+ .temp_en = false,
+};
+
+static const struct inv_icm42600_hw inv_icm42600_hw[INV_CHIP_NB] = {
+ [INV_CHIP_ICM42600] = {
+ .whoami = INV_ICM42600_WHOAMI_ICM42600,
+ .name = "icm42600",
+ .conf = &inv_icm42600_default_conf,
+ },
+ [INV_CHIP_ICM42602] = {
+ .whoami = INV_ICM42600_WHOAMI_ICM42602,
+ .name = "icm42602",
+ .conf = &inv_icm42600_default_conf,
+ },
+ [INV_CHIP_ICM42605] = {
+ .whoami = INV_ICM42600_WHOAMI_ICM42605,
+ .name = "icm42605",
+ .conf = &inv_icm42600_default_conf,
+ },
+ [INV_CHIP_ICM42622] = {
+ .whoami = INV_ICM42600_WHOAMI_ICM42622,
+ .name = "icm42622",
+ .conf = &inv_icm42600_default_conf,
+ },
+};
+
+const struct iio_mount_matrix *
+inv_icm42600_get_mount_matrix(const struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ const struct inv_icm42600_state *st =
+ iio_device_get_drvdata((struct iio_dev *)indio_dev);
+
+ return &st->orientation;
+}
+
+uint32_t inv_icm42600_odr_to_period(enum inv_icm42600_odr odr)
+{
+ static uint32_t odr_periods[INV_ICM42600_ODR_NB] = {
+ /* reserved values */
+ 0, 0, 0,
+ /* 8kHz */
+ 125000,
+ /* 4kHz */
+ 250000,
+ /* 2kHz */
+ 500000,
+ /* 1kHz */
+ 1000000,
+ /* 200Hz */
+ 5000000,
+ /* 100Hz */
+ 10000000,
+ /* 50Hz */
+ 20000000,
+ /* 25Hz */
+ 40000000,
+ /* 12.5Hz */
+ 80000000,
+ /* 6.25Hz */
+ 160000000,
+ /* 3.125Hz */
+ 320000000,
+ /* 1.5625Hz */
+ 640000000,
+ /* 500Hz */
+ 2000000,
+ };
+
+ return odr_periods[odr];
+}
+
+static int inv_icm42600_set_pwr_mgmt0(struct inv_icm42600_state *st,
+ enum inv_icm42600_sensor_mode gyro,
+ enum inv_icm42600_sensor_mode accel,
+ bool temp, unsigned int *sleep_ms)
+{
+ enum inv_icm42600_sensor_mode oldgyro = st->conf.gyro.mode;
+ enum inv_icm42600_sensor_mode oldaccel = st->conf.accel.mode;
+ bool oldtemp = st->conf.temp_en;
+ unsigned int sleepval;
+ unsigned int val;
+ int ret;
+
+ /* if nothing changed, exit */
+ if (gyro == oldgyro && accel == oldaccel && temp == oldtemp)
+ return 0;
+
+ val = INV_ICM42600_PWR_MGMT0_GYRO(gyro) |
+ INV_ICM42600_PWR_MGMT0_ACCEL(accel);
+ if (!temp)
+ val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS;
+ ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val);
+ if (ret)
+ return ret;
+
+ st->conf.gyro.mode = gyro;
+ st->conf.accel.mode = accel;
+ st->conf.temp_en = temp;
+
+ /* compute required wait time for sensors to stabilize */
+ sleepval = 0;
+ /* temperature stabilization time */
+ if (temp && !oldtemp) {
+ if (sleepval < INV_ICM42600_TEMP_STARTUP_TIME_MS)
+ sleepval = INV_ICM42600_TEMP_STARTUP_TIME_MS;
+ }
+ /* accel startup time */
+ if (accel != oldaccel && oldaccel == INV_ICM42600_SENSOR_MODE_OFF) {
+ /* block any register write for at least 200 µs */
+ usleep_range(200, 300);
+ if (sleepval < INV_ICM42600_ACCEL_STARTUP_TIME_MS)
+ sleepval = INV_ICM42600_ACCEL_STARTUP_TIME_MS;
+ }
+ if (gyro != oldgyro) {
+ /* gyro startup time */
+ if (oldgyro == INV_ICM42600_SENSOR_MODE_OFF) {
+ /* block any register write for at least 200 µs */
+ usleep_range(200, 300);
+ if (sleepval < INV_ICM42600_GYRO_STARTUP_TIME_MS)
+ sleepval = INV_ICM42600_GYRO_STARTUP_TIME_MS;
+ /* gyro stop time */
+ } else if (gyro == INV_ICM42600_SENSOR_MODE_OFF) {
+ if (sleepval < INV_ICM42600_GYRO_STOP_TIME_MS)
+ sleepval = INV_ICM42600_GYRO_STOP_TIME_MS;
+ }
+ }
+
+ /* deferred sleep value if sleep pointer is provided or direct sleep */
+ if (sleep_ms)
+ *sleep_ms = sleepval;
+ else if (sleepval)
+ msleep(sleepval);
+
+ return 0;
+}
+
+int inv_icm42600_set_accel_conf(struct inv_icm42600_state *st,
+ struct inv_icm42600_sensor_conf *conf,
+ unsigned int *sleep_ms)
+{
+ struct inv_icm42600_sensor_conf *oldconf = &st->conf.accel;
+ unsigned int val;
+ int ret;
+
+ /* Sanitize missing values with current values */
+ if (conf->mode < 0)
+ conf->mode = oldconf->mode;
+ if (conf->fs < 0)
+ conf->fs = oldconf->fs;
+ if (conf->odr < 0)
+ conf->odr = oldconf->odr;
+ if (conf->filter < 0)
+ conf->filter = oldconf->filter;
+
+ /* set ACCEL_CONFIG0 register (accel fullscale & odr) */
+ if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+ val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->fs) |
+ INV_ICM42600_ACCEL_CONFIG0_ODR(conf->odr);
+ ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val);
+ if (ret)
+ return ret;
+ oldconf->fs = conf->fs;
+ oldconf->odr = conf->odr;
+ }
+
+ /* set GYRO_ACCEL_CONFIG0 register (accel filter) */
+ if (conf->filter != oldconf->filter) {
+ val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->filter) |
+ INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(st->conf.gyro.filter);
+ ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);
+ if (ret)
+ return ret;
+ oldconf->filter = conf->filter;
+ }
+
+ /* set PWR_MGMT0 register (accel sensor mode) */
+ return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode, conf->mode,
+ st->conf.temp_en, sleep_ms);
+}
+
+int inv_icm42600_set_gyro_conf(struct inv_icm42600_state *st,
+ struct inv_icm42600_sensor_conf *conf,
+ unsigned int *sleep_ms)
+{
+ struct inv_icm42600_sensor_conf *oldconf = &st->conf.gyro;
+ unsigned int val;
+ int ret;
+
+ /* sanitize missing values with current values */
+ if (conf->mode < 0)
+ conf->mode = oldconf->mode;
+ if (conf->fs < 0)
+ conf->fs = oldconf->fs;
+ if (conf->odr < 0)
+ conf->odr = oldconf->odr;
+ if (conf->filter < 0)
+ conf->filter = oldconf->filter;
+
+ /* set GYRO_CONFIG0 register (gyro fullscale & odr) */
+ if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+ val = INV_ICM42600_GYRO_CONFIG0_FS(conf->fs) |
+ INV_ICM42600_GYRO_CONFIG0_ODR(conf->odr);
+ ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val);
+ if (ret)
+ return ret;
+ oldconf->fs = conf->fs;
+ oldconf->odr = conf->odr;
+ }
+
+ /* set GYRO_ACCEL_CONFIG0 register (gyro filter) */
+ if (conf->filter != oldconf->filter) {
+ val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(st->conf.accel.filter) |
+ INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->filter);
+ ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);
+ if (ret)
+ return ret;
+ oldconf->filter = conf->filter;
+ }
+
+ /* set PWR_MGMT0 register (gyro sensor mode) */
+ return inv_icm42600_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode,
+ st->conf.temp_en, sleep_ms);
+
+ return 0;
+}
+
+int inv_icm42600_set_temp_conf(struct inv_icm42600_state *st, bool enable,
+ unsigned int *sleep_ms)
+{
+ return inv_icm42600_set_pwr_mgmt0(st, st->conf.gyro.mode,
+ st->conf.accel.mode, enable,
+ sleep_ms);
+}
+
+int inv_icm42600_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
+ unsigned int writeval, unsigned int *readval)
+{
+ struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ if (readval)
+ ret = regmap_read(st->map, reg, readval);
+ else
+ ret = regmap_write(st->map, reg, writeval);
+
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int inv_icm42600_set_conf(struct inv_icm42600_state *st,
+ const struct inv_icm42600_conf *conf)
+{
+ unsigned int val;
+ int ret;
+
+ /* set PWR_MGMT0 register (gyro & accel sensor mode, temp enabled) */
+ val = INV_ICM42600_PWR_MGMT0_GYRO(conf->gyro.mode) |
+ INV_ICM42600_PWR_MGMT0_ACCEL(conf->accel.mode);
+ if (!conf->temp_en)
+ val |= INV_ICM42600_PWR_MGMT0_TEMP_DIS;
+ ret = regmap_write(st->map, INV_ICM42600_REG_PWR_MGMT0, val);
+ if (ret)
+ return ret;
+
+ /* set GYRO_CONFIG0 register (gyro fullscale & odr) */
+ val = INV_ICM42600_GYRO_CONFIG0_FS(conf->gyro.fs) |
+ INV_ICM42600_GYRO_CONFIG0_ODR(conf->gyro.odr);
+ ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_CONFIG0, val);
+ if (ret)
+ return ret;
+
+ /* set ACCEL_CONFIG0 register (accel fullscale & odr) */
+ val = INV_ICM42600_ACCEL_CONFIG0_FS(conf->accel.fs) |
+ INV_ICM42600_ACCEL_CONFIG0_ODR(conf->accel.odr);
+ ret = regmap_write(st->map, INV_ICM42600_REG_ACCEL_CONFIG0, val);
+ if (ret)
+ return ret;
+
+ /* set GYRO_ACCEL_CONFIG0 register (gyro & accel filters) */
+ val = INV_ICM42600_GYRO_ACCEL_CONFIG0_ACCEL_FILT(conf->accel.filter) |
+ INV_ICM42600_GYRO_ACCEL_CONFIG0_GYRO_FILT(conf->gyro.filter);
+ ret = regmap_write(st->map, INV_ICM42600_REG_GYRO_ACCEL_CONFIG0, val);
+ if (ret)
+ return ret;
+
+ /* update internal conf */
+ st->conf = *conf;
+
+ return 0;
+}
+
+/**
+ * inv_icm42600_setup() - check and setup chip
+ * @st: driver internal state
+ * @bus_setup: callback for setting up bus specific registers
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_icm42600_setup(struct inv_icm42600_state *st,
+ inv_icm42600_bus_setup bus_setup)
+{
+ const struct inv_icm42600_hw *hw = &inv_icm42600_hw[st->chip];
+ const struct device *dev = regmap_get_device(st->map);
+ unsigned int val;
+ int ret;
+
+ /* check chip self-identification value */
+ ret = regmap_read(st->map, INV_ICM42600_REG_WHOAMI, &val);
+ if (ret)
+ return ret;
+ if (val != hw->whoami) {
+ dev_err(dev, "invalid whoami %#02x expected %#02x (%s)\n",
+ val, hw->whoami, hw->name);
+ return -ENODEV;
+ }
+ st->name = hw->name;
+
+ /* reset to make sure previous state are not there */
+ ret = regmap_write(st->map, INV_ICM42600_REG_DEVICE_CONFIG,
+ INV_ICM42600_DEVICE_CONFIG_SOFT_RESET);
+ if (ret)
+ return ret;
+ msleep(INV_ICM42600_RESET_TIME_MS);
+
+ ret = regmap_read(st->map, INV_ICM42600_REG_INT_STATUS, &val);
+ if (ret)
+ return ret;
+ if (!(val & INV_ICM42600_INT_STATUS_RESET_DONE)) {
+ dev_err(dev, "reset error, reset done bit not set\n");
+ return -ENODEV;
+ }
+
+ /* set chip bus configuration */
+ ret = bus_setup(st);
+ if (ret)
+ return ret;
+
+ /* sensor data in big-endian (default) */
+ ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,
+ INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN,
+ INV_ICM42600_INTF_CONFIG0_SENSOR_DATA_ENDIAN);
+ if (ret)
+ return ret;
+
+ return inv_icm42600_set_conf(st, hw->conf);
+}
+
+static int inv_icm42600_enable_regulator_vddio(struct inv_icm42600_state *st)
+{
+ int ret;
+
+ ret = regulator_enable(st->vddio_supply);
+ if (ret)
+ return ret;
+
+ /* wait a little for supply ramp */
+ usleep_range(3000, 4000);
+
+ return 0;
+}
+
+static void inv_icm42600_disable_vdd_reg(void *_data)
+{
+ struct inv_icm42600_state *st = _data;
+ const struct device *dev = regmap_get_device(st->map);
+ int ret;
+
+ ret = regulator_disable(st->vdd_supply);
+ if (ret)
+ dev_err(dev, "failed to disable vdd error %d\n", ret);
+}
+
+static void inv_icm42600_disable_vddio_reg(void *_data)
+{
+ struct inv_icm42600_state *st = _data;
+ const struct device *dev = regmap_get_device(st->map);
+ int ret;
+
+ ret = regulator_disable(st->vddio_supply);
+ if (ret)
+ dev_err(dev, "failed to disable vddio error %d\n", ret);
+}
+
+static void inv_icm42600_disable_pm(void *_data)
+{
+ struct device *dev = _data;
+
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+}
+
+int inv_icm42600_core_probe(struct regmap *regmap, int chip,
+ inv_icm42600_bus_setup bus_setup)
+{
+ struct device *dev = regmap_get_device(regmap);
+ struct inv_icm42600_state *st;
+ int ret;
+
+ if (chip < 0 || chip >= INV_CHIP_NB) {
+ dev_err(dev, "invalid chip = %d\n", chip);
+ return -ENODEV;
+ }
+
+ st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, st);
+ mutex_init(&st->lock);
+ st->chip = chip;
+ st->map = regmap;
+
+ ret = iio_read_mount_matrix(dev, "mount-matrix", &st->orientation);
+ if (ret) {
+ dev_err(dev, "failed to retrieve mounting matrix %d\n", ret);
+ return ret;
+ }
+
+ st->vdd_supply = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(st->vdd_supply))
+ return PTR_ERR(st->vdd_supply);
+
+ st->vddio_supply = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(st->vddio_supply))
+ return PTR_ERR(st->vddio_supply);
+
+ ret = regulator_enable(st->vdd_supply);
+ if (ret)
+ return ret;
+ msleep(INV_ICM42600_POWER_UP_TIME_MS);
+
+ ret = devm_add_action_or_reset(dev, inv_icm42600_disable_vdd_reg, st);
+ if (ret)
+ return ret;
+
+ ret = inv_icm42600_enable_regulator_vddio(st);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, inv_icm42600_disable_vddio_reg, st);
+ if (ret)
+ return ret;
+
+ /* setup chip registers */
+ ret = inv_icm42600_setup(st, bus_setup);
+ if (ret)
+ return ret;
+
+ /* setup runtime power management */
+ ret = pm_runtime_set_active(dev);
+ if (ret)
+ return ret;
+ pm_runtime_get_noresume(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_put(dev);
+
+ return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev);
+}
+EXPORT_SYMBOL_GPL(inv_icm42600_core_probe);
+
+/*
+ * Suspend saves sensors state and turns everything off.
+ * Check first if runtime suspend has not already done the job.
+ */
+static int __maybe_unused inv_icm42600_suspend(struct device *dev)
+{
+ struct inv_icm42600_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ st->suspended.gyro = st->conf.gyro.mode;
+ st->suspended.accel = st->conf.accel.mode;
+ st->suspended.temp = st->conf.temp_en;
+ if (pm_runtime_suspended(dev)) {
+ ret = 0;
+ goto out_unlock;
+ }
+
+ ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,
+ INV_ICM42600_SENSOR_MODE_OFF, false,
+ NULL);
+ if (ret)
+ goto out_unlock;
+
+ regulator_disable(st->vddio_supply);
+
+out_unlock:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+/*
+ * System resume gets the system back on and restores the sensors state.
+ * Manually put runtime power management in system active state.
+ */
+static int __maybe_unused inv_icm42600_resume(struct device *dev)
+{
+ struct inv_icm42600_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ ret = inv_icm42600_enable_regulator_vddio(st);
+ if (ret)
+ goto out_unlock;
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ /* restore sensors state */
+ ret = inv_icm42600_set_pwr_mgmt0(st, st->suspended.gyro,
+ st->suspended.accel,
+ st->suspended.temp, NULL);
+ if (ret)
+ goto out_unlock;
+
+out_unlock:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+/* Runtime suspend will turn off sensors that are enabled by iio devices. */
+static int __maybe_unused inv_icm42600_runtime_suspend(struct device *dev)
+{
+ struct inv_icm42600_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ /* disable all sensors */
+ ret = inv_icm42600_set_pwr_mgmt0(st, INV_ICM42600_SENSOR_MODE_OFF,
+ INV_ICM42600_SENSOR_MODE_OFF, false,
+ NULL);
+ if (ret)
+ goto error_unlock;
+
+ regulator_disable(st->vddio_supply);
+
+error_unlock:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+/* Sensors are enabled by iio devices, no need to turn them back on here. */
+static int __maybe_unused inv_icm42600_runtime_resume(struct device *dev)
+{
+ struct inv_icm42600_state *st = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ ret = inv_icm42600_enable_regulator_vddio(st);
+
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+const struct dev_pm_ops inv_icm42600_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(inv_icm42600_suspend, inv_icm42600_resume)
+ SET_RUNTIME_PM_OPS(inv_icm42600_runtime_suspend,
+ inv_icm42600_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(inv_icm42600_pm_ops);
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense ICM-426xx device driver");
+MODULE_LICENSE("GPL");
--
2.17.1
Powered by blists - more mailing lists