[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200527133746.643895-1-arnd@arndb.de>
Date: Wed, 27 May 2020 15:37:34 +0200
From: Arnd Bergmann <arnd@...db.de>
To: Sekhar Nori <nsekhar@...com>,
Peter Ujfalusi <peter.ujfalusi@...com>
Cc: soc@...nel.org, Arnd Bergmann <arnd@...db.de>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Russell King <linux@...linux.org.uk>, Bin Liu <b-liu@...com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] ARM: davinci: fix build failure without I2C
The two supplies are referenced outside of #ifdef CONFIG_I2C but
defined inside, which breaks the build if that is not built-in:
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
^
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:860:49: error: use of undeclared identifier 'fixed_supplies_1_8v'
regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
I don't know if the regulators are used anywhere without I2C, but
always registering them seems to be the safe choice here.
On a related note, it might be best to also deal with CONFIG_I2C=m
across the file, unless this is going to be moved to DT and removed
really soon anyway.
Fixes: 5e06d19694a4 ("ARM: davinci: dm644x-evm: Add Fixed regulators needed for tlv320aic33")
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/arm/mach-davinci/board-dm644x-evm.c | 26 ++++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3461d12bbfc0..a5d3708fedf6 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -655,19 +655,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
};
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
- /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
- REGULATOR_SUPPLY("AVDD", "1-001b"),
- REGULATOR_SUPPLY("DRVDD", "1-001b"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
- /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
- REGULATOR_SUPPLY("IOVDD", "1-001b"),
- REGULATOR_SUPPLY("DVDD", "1-001b"),
-};
-
#define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12)
#define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11)
@@ -700,6 +687,19 @@ static void __init evm_init_i2c(void)
}
#endif
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
+ /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
+ REGULATOR_SUPPLY("AVDD", "1-001b"),
+ REGULATOR_SUPPLY("DRVDD", "1-001b"),
+};
+
+static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
+ /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
+ REGULATOR_SUPPLY("IOVDD", "1-001b"),
+ REGULATOR_SUPPLY("DVDD", "1-001b"),
+};
+
#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
/* venc standard timings */
--
2.26.2
Powered by blists - more mailing lists