lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <2499396.lGaqSPkdTl@feketebors>
Date:   Tue, 2 Jun 2020 12:19:00 +0300
From:   Peter Ujfalusi <peter.ujfalusi@...com>
To:     Sekhar Nori <nsekhar@...com>, Arnd Bergmann <arnd@...db.de>
CC:     <soc@...nel.org>, Arnd Bergmann <arnd@...db.de>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Russell King <linux@...linux.org.uk>, Bin Liu <b-liu@...com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ARM: davinci: fix build failure without I2C

Hi Arnd,

On Wednesday, 27 May 2020 16.37.34 EEST Arnd Bergmann wrote:
> The two supplies are referenced outside of #ifdef CONFIG_I2C but
> defined inside, which breaks the build if that is not built-in:
> 
> mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
>                                      ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
>                                                 ^
> mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
> mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
> mach-davinci/board-dm644x-evm.c:860:49: error: use of undeclared identifier 'fixed_supplies_1_8v'
>         regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
> 
> I don't know if the regulators are used anywhere without I2C, but
> always registering them seems to be the safe choice here.

Thanks for fixing this,
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@...com>
 
> On a related note, it might be best to also deal with CONFIG_I2C=m
> across the file, unless this is going to be moved to DT and removed
> really soon anyway.
> 
> Fixes: 5e06d19694a4 ("ARM: davinci: dm644x-evm: Add Fixed regulators needed for tlv320aic33")
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> ---
>  arch/arm/mach-davinci/board-dm644x-evm.c | 26 ++++++++++++------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index 3461d12bbfc0..a5d3708fedf6 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -655,19 +655,6 @@ static struct i2c_board_info __initdata i2c_info[] =  {
>  	},
>  };
>  
> -/* Fixed regulator support */
> -static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
> -	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
> -	REGULATOR_SUPPLY("AVDD", "1-001b"),
> -	REGULATOR_SUPPLY("DRVDD", "1-001b"),
> -};
> -
> -static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
> -	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
> -	REGULATOR_SUPPLY("IOVDD", "1-001b"),
> -	REGULATOR_SUPPLY("DVDD", "1-001b"),
> -};
> -
>  #define DM644X_I2C_SDA_PIN	GPIO_TO_PIN(2, 12)
>  #define DM644X_I2C_SCL_PIN	GPIO_TO_PIN(2, 11)
>  
> @@ -700,6 +687,19 @@ static void __init evm_init_i2c(void)
>  }
>  #endif
>  
> +/* Fixed regulator support */
> +static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
> +	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
> +	REGULATOR_SUPPLY("AVDD", "1-001b"),
> +	REGULATOR_SUPPLY("DRVDD", "1-001b"),
> +};
> +
> +static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
> +	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
> +	REGULATOR_SUPPLY("IOVDD", "1-001b"),
> +	REGULATOR_SUPPLY("DVDD", "1-001b"),
> +};
> +
>  #define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
>  
>  /* venc standard timings */
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ