[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0630ae9c-6ae7-b74e-5dd3-0c569bad74f5@marek.ca>
Date: Thu, 28 May 2020 23:15:09 -0400
From: Jonathan Marek <jonathan@...ek.ca>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865
dts
On 5/28/20 11:05 PM, Bjorn Andersson wrote:
> On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:
>
>> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
>>
>> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
>> few changes. Notably, the HDK865 dts has regulator config changed a bit based
>> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
>
> Can you please elaborate on this discrepancy? I do remember seeing
> something odd when looking at this, but it seems like I didn't document
> it anywhere...
>
> Thanks,
> Bjorn
>
Mainly there's a few regulators with different min/max voltage values.
For example with l16a, downstream has min/max 3024000/3304000 but
upstream sm8250-mtp has 2704000/2960000. I also added l18a.
>>
>> Jonathan Marek (6):
>> arm64: dts: qcom: sm8150: add apps_smmu node
>> arm64: dts: qcom: sm8250: add apps_smmu node
>> arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
>> arm64: dts: qcom: sm8250: Add USB and PHY device nodes
>> arm64: dts: qcom: add sm8150 hdk dts
>> arm64: dts: qcom: add sm8250 hdk dts
>>
>> arch/arm64/boot/dts/qcom/Makefile | 2 +
>> arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
>> arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++
>> arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
>> arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++
>> 5 files changed, 1384 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
>>
>> --
>> 2.26.1
>>
Powered by blists - more mailing lists