[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200529030505.GY279327@builder.lan>
Date: Thu, 28 May 2020 20:05:05 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Jonathan Marek <jonathan@...ek.ca>
Cc: linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865
dts
On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:
> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
>
> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> few changes. Notably, the HDK865 dts has regulator config changed a bit based
> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
Can you please elaborate on this discrepancy? I do remember seeing
something odd when looking at this, but it seems like I didn't document
it anywhere...
Thanks,
Bjorn
>
> Jonathan Marek (6):
> arm64: dts: qcom: sm8150: add apps_smmu node
> arm64: dts: qcom: sm8250: add apps_smmu node
> arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
> arm64: dts: qcom: sm8250: Add USB and PHY device nodes
> arm64: dts: qcom: add sm8150 hdk dts
> arm64: dts: qcom: add sm8250 hdk dts
>
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++
> arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++
> 5 files changed, 1384 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
>
> --
> 2.26.1
>
Powered by blists - more mailing lists