linux-kernel - Re: [PATCH 6/6] arm64: dts: qcom: add sm8250 hdk dts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200529030322.GX279327@builder.lan>
Date:   Thu, 28 May 2020 20:03:22 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Jonathan Marek <jonathan@...ek.ca>
Cc:     linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 6/6] arm64: dts: qcom: add sm8250 hdk dts

On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:

> Add initial HDK865 dts, based on sm8250-mtp, with a few changes.
> Notably, regulator configs are changed a bit.
> 
> Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
> ---
>  arch/arm64/boot/dts/qcom/Makefile       |   1 +
>  arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 ++++++++++++++++++++++++
>  2 files changed, 455 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index e5dbd8b63951..4649e8bc5034 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> new file mode 100644
> index 000000000000..d35014bf4f81
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> @@ -0,0 +1,454 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "sm8250.dtsi"
> +#include "pm8150.dtsi"
> +#include "pm8150b.dtsi"
> +#include "pm8150l.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. SM8250 HDK";
> +	compatible = "qcom,sm8250-hdk";

	compatible = "qcom,sm8250-hdk", "qcom,sm8250";

Apart from that this looks good!

Thanks,
Bjorn