linux-kernel - Re: tegra124-jetson-tk1: sata doesnt work since 5.2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20200603105600.GB3478467@ulmo>
Date:   Wed, 3 Jun 2020 12:56:00 +0200
From:   Thierry Reding <thierry.reding@...il.com>
To:     LABBE Corentin <clabbe@...libre.com>,
        Peter De Schrijver <pdeschrijver@...dia.com>
Cc:     Dmitry Osipenko <digetx@...il.com>, jonathanh@...dia.com,
        pgaikwad@...dia.com, mturquette@...libre.com, sboyd@...nel.org,
        axboe@...nel.dk, linux-tegra@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-ide@...r.kernel.org
Subject: Re: tegra124-jetson-tk1: sata doesnt work since 5.2

On Tue, Jun 02, 2020 at 10:19:58AM +0200, LABBE Corentin wrote:
> On Mon, Jun 01, 2020 at 05:30:37PM +0300, Dmitry Osipenko wrote:
> > 31.05.2020 22:31, LABBE Corentin пишет:
> > > On Thu, Mar 19, 2020 at 08:44:01AM +0100, LABBE Corentin wrote:
> > >> Hello
> > >>
> > >> sata doesnt work on tegra124-jetson-tk1 on next and master and at least since 5.2 (but 5.1 works).
> > >> [    0.492810] +5V_SATA: supplied by +5V_SYS
> > >> [    0.493230] +12V_SATA: supplied by +VDD_MUX
> > >> [    2.088675] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
> > >> [    2.097643] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
> > >> [    3.314776] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
> > >> [    3.323658] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
> > >> [    5.236964] tegra-ahci 70027000.sata: 70027000.sata supply ahci not found, using dummy regulator
> > >> [    5.245867] tegra-ahci 70027000.sata: 70027000.sata supply phy not found, using dummy regulator
> > >> [    5.254706] tegra-ahci 70027000.sata: 70027000.sata supply target not found, using dummy regulator
> > >> [    5.310270] phy phy-sata.6: phy poweron failed --> -110
> > >> [    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
> > >> [    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
> > >> [   35.694269] +5V_SATA: disabling
> > >> [   35.697438] +12V_SATA: disabling
> > >>
> > >> I have bisected this problem:
> > >> git bisect start
> > >> # bad: [22c58fd70ca48a29505922b1563826593b08cc00] Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
> > >> git bisect bad 22c58fd70ca48a29505922b1563826593b08cc00
> > >> # good: [67e38f578aaebf34fc1278bbe45a78ee8c73dd33] ARM: ep93xx: move pinctrl interfaces into include/linux/soc
> > >> git bisect good 67e38f578aaebf34fc1278bbe45a78ee8c73dd33
> > >> # good: [80f232121b69cc69a31ccb2b38c1665d770b0710] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
> > >> git bisect good 80f232121b69cc69a31ccb2b38c1665d770b0710
> > >> # good: [e57ccca1ba33e1d92cc3bbf8b6304a46948844b0] Merge tag 'sound-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
> > >> git bisect good e57ccca1ba33e1d92cc3bbf8b6304a46948844b0
> > >> # bad: [983dfa4b6ee556563f7963348e4e2f97fc8a15b8] Merge tag 'for-linus-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/uml
> > >> git bisect bad 983dfa4b6ee556563f7963348e4e2f97fc8a15b8
> > >> # good: [8e4ff713ce313dcabbb60e6ede1ffc193e67631f] Merge tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
> > >> git bisect good 8e4ff713ce313dcabbb60e6ede1ffc193e67631f
> > >> # bad: [b970afcfcabd63cd3832e95db096439c177c3592] Merge tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
> > >> git bisect bad b970afcfcabd63cd3832e95db096439c177c3592
> > >> # bad: [601e6bcc4ef02bda2831d5ac8133947b5edf597b] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
> > >> git bisect bad 601e6bcc4ef02bda2831d5ac8133947b5edf597b
> > >> # good: [7e9c62bdb41af76974d594da89854a6aba645e58] Merge branches 'clk-sa', 'clk-aspeed', 'clk-samsung', 'clk-ingenic' and 'clk-zynq' into clk-next
> > >> git bisect good 7e9c62bdb41af76974d594da89854a6aba645e58
> > >> # bad: [0caf000817353cfc5db22363ecdac63b83d3a3f9] Merge branch 'clk-ti' into clk-next
> > >> git bisect bad 0caf000817353cfc5db22363ecdac63b83d3a3f9
> > >> # good: [5816b74581b45cf086a84ab14e13354a65e8e22c] Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' and 'clk-qoriq' into clk-next
> > >> git bisect good 5816b74581b45cf086a84ab14e13354a65e8e22c
> > >> # good: [7b4c162e03d47e037f8ee773c3e300eefb599a83] clk: at91: Mark struct clk_range as const
> > >> git bisect good 7b4c162e03d47e037f8ee773c3e300eefb599a83
> > >> # bad: [e71f4d385878671991e200083c7d30eb4ca8e99a] clk: tegra: divider: Mark Memory Controller clock as read-only
> > >> git bisect bad e71f4d385878671991e200083c7d30eb4ca8e99a
> > >> # bad: [924ee3d551c9deb16090230b824988bd37e72aa8] clk: tegra: emc: Don't enable EMC clock manually
> > >> git bisect bad 924ee3d551c9deb16090230b824988bd37e72aa8
> > >> # bad: [40db569d6769ffa3864fd1b89616b1a7323568a8] clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider
> > >> git bisect bad 40db569d6769ffa3864fd1b89616b1a7323568a8
> > >> # bad: [bff1cef5f23afbe49f5ebd766980dc612f5e9d0a] clk: tegra: Don't enable already enabled PLLs
> > >> git bisect bad bff1cef5f23afbe49f5ebd766980dc612f5e9d0a
> > >> # first bad commit: [bff1cef5f23afbe49f5ebd766980dc612f5e9d0a] clk: tegra: Don't enable already enabled PLLs
> > >>
> > > 
> > > Hello
> > > 
> > > I have digged a bit more and with the following "patch" I have now access to sata again
> > > diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> > > index 0b212cf2e794..b4e2020051d5 100644
> > > --- a/drivers/clk/tegra/clk-pll.c
> > > +++ b/drivers/clk/tegra/clk-pll.c
> > > @@ -1602,7 +1603,7 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
> > >         unsigned long input_rate;
> > >  
> > >         if (clk_pll_is_enabled(hw))
> > > -               return 0;
> > > +               pr_info("%s %s\n", __func__, clk_hw_get_name(&pll->hw));
> > >  
> > >         input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
> > > 
> > > This patch lead to a probed ahci, and I can see "clk_plle_tegra114_enable pll_e" in messages.
> > > 
> > > So the bad part of bff1cef5f23afbe49f5ebd766980dc612f5e9d0a is found.
> > 
> > Hello Labbe,
> > 
> > Looks like indeed this PLLE change should be reverted. I see that the
> > code disables PLLE before changing its configuration, so apparently the
> > enable-check shouldn't be needed.
> > 
> > > As additional information, my previous kernel has CONFIG_PHY_TEGRA_XUSB=m (since firmware is on rootfs which is on sata)
> > > but with this sata fail the same, having CONFIG_PHY_TEGRA_XUSB=y (and so xusb firmware in kernel) seems "necessary" for having SATA working.
> > 
> > Sounds like PLLE needs to be enabled for SATA, but ahci-tegra driver
> > doesn't do that.
> > 
> > Could you please try this change:
> > 
> > --- >8 ---
> > diff --git a/drivers/clk/tegra/clk-tegra124.c
> > b/drivers/clk/tegra/clk-tegra124.c
> > index e931319dcc9d..7dbc14652830 100644
> > --- a/drivers/clk/tegra/clk-tegra124.c
> > +++ b/drivers/clk/tegra/clk-tegra124.c
> > @@ -1330,6 +1330,7 @@ static struct tegra_clk_init_table
> > common_init_table[] __initdata = {
> >  	{ TEGRA124_CLK_I2S3_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
> >  	{ TEGRA124_CLK_I2S4_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
> >  	{ TEGRA124_CLK_VIMCLK_SYNC, TEGRA124_CLK_CLK_MAX, 24576000, 0 },
> > +	{ TEGRA124_CLK_PLL_E, TEGRA124_CLK_CLK_MAX, 0, 1 },
> >  	/* must be the last entry */
> >  	{ TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0 },
> >  };
> > --- >8 ---
> 
> This patch alone does not fix the issue.

Looking at clk_plle_tegra114_enable(), there's a bunch of configuration
going on other than just enabling the PLL_E and it's likely that whoever
set up the PLL_E first (probably some bootloader) didn't have the same
requirements as the kernel has (most notably I can imagine that hardware
control of the XUSB and SATA PLLs remains disabled in the bootloader due
to the different way that they are used.

Peter, do you have any more background on what could be going on here or
who might be initializing the PLL_E (and others) in an incompatible way?
An alternative might be to identify who configures the PLL badly and fix
the culprit. But that's a bit of a strong dependency for my taste,
especially given that currenty versions of the bootloaders are broken.

Thierry

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)