linux-kernel - Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200604135221.GH16719@Mani-XPS-13-9360>
Date:   Thu, 4 Jun 2020 19:22:21 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     Jonathan Marek <jonathan@...ek.ca>
Cc:     linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865
 dts

Hi,

On Sat, May 23, 2020 at 10:38:06PM -0400, Jonathan Marek wrote:
> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> 

I've tested this series on an SM8250 based board and able to get Type C (USB0)
working. There are also couple of Type A ports (USB1) on that board behind a
USB hub. It is probing fine but I don't see any activity while connecting a
USB device. Will continue to debug and once I get them working, I'll add my
Tested-by tag.

Thanks,
Mani

> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> few changes. Notably, the HDK865 dts has regulator config changed a bit based
> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
> 
> Jonathan Marek (6):
>   arm64: dts: qcom: sm8150: add apps_smmu node
>   arm64: dts: qcom: sm8250: add apps_smmu node
>   arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
>   arm64: dts: qcom: sm8250: Add USB and PHY device nodes
>   arm64: dts: qcom: add sm8150 hdk dts
>   arm64: dts: qcom: add sm8250 hdk dts
> 
>  arch/arm64/boot/dts/qcom/Makefile       |   2 +
>  arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8150.dtsi    | 180 +++++++++
>  arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8250.dtsi    | 287 +++++++++++++++
>  5 files changed, 1384 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> 
> -- 
> 2.26.1
>