| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200608064904.GA1187395@jade>
Date: Mon, 8 Jun 2020 08:49:04 +0200
From: Jens Wiklander <jens.wiklander@...aro.org>
To: "Jorge Ramirez-Ortiz, Foundries" <jorge@...ndries.io>
Cc: Sumit Garg <sumit.garg@...aro.org>,
"tee-dev @ lists . linaro . org" <tee-dev@...ts.linaro.org>,
ricardo@...ndries.io, mike@...ndries.io,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [Tee-dev] [PATCH v2] drivers: optee: allow op-tee to access
devices on the i2c bus
On Mon, Jun 01, 2020 at 09:24:46AM +0200, Jorge Ramirez-Ortiz, Foundries wrote:
> On 01/06/20, Sumit Garg wrote:
> > Hi Jorge,
>
> hey
>
> >
> > On Mon, 1 Jun 2020 at 04:41, Jorge Ramirez-Ortiz <jorge@...ndries.io> wrote:
> > >
> > > Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to
> > > control this type of cryptographic devices it needs coordinated access
> > > to the bus, so collisions and RUNTIME_PM dont get in the way.
> > >
> > > This trampoline driver allow OP-TEE to access them.
> > >
> >
> > This sounds like an interesting use-case but I would like to
> > understand how secure is this communication interface with the secure
> > element? Like in the case of RPMB, secure world data is encrypted
> > which flows via tee-supplicant to RPMB device.
>
> right, the data in the buffer should be encrypted in both directions
> (in the case of the SE050 [1] we have the option to operate with or
> without encryption which is what I am doing during development
> [2]).
>
> But ultimately -before any product can be shipped- all comms must be
> encrypted: this means that when OP-TEE uses the SE050 for crypto, it
> must encrypt the data on write and decrypt what is comming from the
> SE050 on read. I am now looking into how to enable this.
>
> [1] https://www.nxp.com/docs/en/data-sheet/SE050-DATASHEET.pdf
> [2] https://github.com/ldts/optee_os/commits/se050
This link doesn't work.
>
> >
> > -Sumit
> >
> > > Signed-off-by: Jorge Ramirez-Ortiz <jorge@...ndries.io>
> > > ---
> > > drivers/tee/optee/optee_msg.h | 18 +++++++++++
> > > drivers/tee/optee/rpc.c | 57 +++++++++++++++++++++++++++++++++++
> > > 2 files changed, 75 insertions(+)
> > >
> > > diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
> > > index 795bc19ae17a..b6cc964fdeea 100644
> > > --- a/drivers/tee/optee/optee_msg.h
> > > +++ b/drivers/tee/optee/optee_msg.h
> > > @@ -419,4 +419,22 @@ struct optee_msg_arg {
> > > */
> > > #define OPTEE_MSG_RPC_CMD_SHM_FREE 7
> > >
> > > +/*
> > > + * Access a device on an i2c bus
> > > + *
> > > + * [in] param[0].u.value.a mode: RD(0), WR(1)
> > > + * [in] param[0].u.value.b i2c adapter
> > > + * [in] param[0].u.value.c i2c chip
> > > + *
> > > + * [io] param[1].u.tmem.buf_ptr physical address
> > > + * [io] param[1].u.tmem.size transfer size in bytes
> > > + * [io] param[1].u.tmem.shm_ref shared memory reference
This should be "[in/out] memref[1]" instead to be able to use
all kinds of memory references.
> > > + *
> > > + * [out] param[0].u.value.a bytes transferred
> > > + *
> > > + */
> > > +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 8
> > > +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0
> > > +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1
> > > +
> > > #endif /* _OPTEE_MSG_H */
> > > diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
> > > index b4ade54d1f28..21d452805c6f 100644
> > > --- a/drivers/tee/optee/rpc.c
> > > +++ b/drivers/tee/optee/rpc.c
> > > @@ -9,6 +9,7 @@
> > > #include <linux/device.h>
> > > #include <linux/slab.h>
> > > #include <linux/tee_drv.h>
> > > +#include <linux/i2c.h>
> > > #include "optee_private.h"
> > > #include "optee_smc.h"
> > >
> > > @@ -48,6 +49,59 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
> > > bad:
> > > arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > }
> > > +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
> > > + struct optee_msg_arg *arg)
> > > +{
> > > + struct i2c_client client;
> > > + struct tee_shm *shm;
> > > + int i, ret;
> > > + char *buf;
> > > + uint32_t attr[] = {
> > > + OPTEE_MSG_ATTR_TYPE_VALUE_INPUT,
> > > + OPTEE_MSG_ATTR_TYPE_TMEM_INOUT,
> > > + OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT,
> > > + };
> > > +
> > > + if (arg->num_params != ARRAY_SIZE(attr))
> > > + goto bad;
Use optee_from_msg_param() to translate this into a struct tee_param,
that way you cover all kinds of memory references. Before returning it
nees to be translated back with optee_to_msg_param().
Cheers,
Jens
> > > +
> > > + for (i = 0; i < ARRAY_SIZE(attr); i++)
> > > + if ((arg->params[i].attr & OPTEE_MSG_ATTR_TYPE_MASK) != attr[i])
> > > + goto bad;
> > > +
> > > + shm = (struct tee_shm *)(unsigned long)arg->params[1].u.tmem.shm_ref;
> > > + buf = (char *)shm->kaddr;
> > > +
> > > + client.addr = arg->params[0].u.value.c;
> > > + client.adapter = i2c_get_adapter(arg->params[0].u.value.b);
> > > + if (!client.adapter)
> > > + goto bad;
> > > +
> > > + snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr);
> > > +
> > > + switch (arg->params[0].u.value.a) {
> > > + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
> > > + ret = i2c_master_recv(&client, buf, arg->params[1].u.tmem.size);
> > > + break;
> > > + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
> > > + ret = i2c_master_send(&client, buf, arg->params[1].u.tmem.size);
> > > + break;
> > > + default:
> > > + i2c_put_adapter(client.adapter);
> > > + goto bad;
> > > + }
> > > +
> > > + if (ret >= 0) {
> > > + arg->params[2].u.value.a = ret;
> > > + arg->ret = TEEC_SUCCESS;
> > > + } else
> > > + arg->ret = TEEC_ERROR_COMMUNICATION;
> > > +
> > > + i2c_put_adapter(client.adapter);
> > > + return;
> > > +bad:
> > > + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +}
> > >
> > > static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key)
> > > {
> > > @@ -382,6 +436,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
> > > case OPTEE_MSG_RPC_CMD_SHM_FREE:
> > > handle_rpc_func_cmd_shm_free(ctx, arg);
> > > break;
> > > + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER:
> > > + handle_rpc_func_cmd_i2c_transfer(ctx, arg);
> > > + break;
> > > default:
> > > handle_rpc_supp_cmd(ctx, arg);
> > > }
> > > --
> > > 2.17.1
> > >
> > > _______________________________________________
> > > Tee-dev mailing list
> > > Tee-dev@...ts.linaro.org
> > > https://lists.linaro.org/mailman/listinfo/tee-dev
Powered by blists - more mailing lists