| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADBw62oLgpUdkwShC3cSqSNx8fo=E=jiw2JeqT86j4GruqouAA@mail.gmail.com>
Date: Mon, 8 Jun 2020 19:53:54 +0800
From: Baolin Wang <baolin.wang7@...il.com>
To: BOUGH CHEN <haibo.chen@....com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Asutosh Das <asutoshd@...eaurora.org>,
Orson Zhai <orsonzhai@...il.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Arnd Bergmann <arnd@...db.de>,
Linus Walleij <linus.walleij@...aro.org>,
Baolin Wang <baolin.wang@...aro.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>
Subject: Re: [PATCH v9 0/5] Add MMC software queue support
Hi Haibo.
On Mon, Jun 8, 2020 at 2:35 PM BOUGH CHEN <haibo.chen@....com> wrote:
>
> > -----Original Message-----
> > From: linux-mmc-owner@...r.kernel.org
> > [mailto:linux-mmc-owner@...r.kernel.org] On Behalf Of Baolin Wang
> > Sent: 2020年2月19日 9:35
> > To: Ulf Hansson <ulf.hansson@...aro.org>
> > Cc: Adrian Hunter <adrian.hunter@...el.com>; Asutosh Das
> > <asutoshd@...eaurora.org>; Orson Zhai <orsonzhai@...il.com>; Chunyan
> > Zhang <zhang.lyra@...il.com>; Arnd Bergmann <arnd@...db.de>; Linus
> > Walleij <linus.walleij@...aro.org>; Baolin Wang <baolin.wang@...aro.org>;
> > linux-mmc@...r.kernel.org; Linux Kernel Mailing List
> > <linux-kernel@...r.kernel.org>
> > Subject: Re: [PATCH v9 0/5] Add MMC software queue support
> >
> > On Wed, Feb 19, 2020 at 7:38 AM Ulf Hansson <ulf.hansson@...aro.org>
> > wrote:
> > >
> > > On Wed, 12 Feb 2020 at 05:14, Baolin Wang <baolin.wang7@...il.com>
> > wrote:
> > > >
> > > > Hi All,
> > > >
> > > > Now the MMC read/write stack will always wait for previous request
> > > > is completed by mmc_blk_rw_wait(), before sending a new request to
> > > > hardware, or queue a work to complete request, that will bring
> > > > context switching overhead, especially for high I/O per second
> > > > rates, to affect the IO performance.
> > > >
> > > > Thus this patch set will introduce the MMC software command queue
> > > > support based on command queue engine's interfaces, and set the
> > > > queue depth as 64 to allow more requests can be be prepared, merged
> > > > and inserted into IO scheduler, but we only allow 2 requests in
> > > > flight, that is enough to let the irq handler always trigger the
> > > > next request without a context switch, as well as avoiding a long latency.
> > > >
> > > > Moreover we can expand the MMC software queue interface to support
> > > > MMC packed request or packed command instead of adding new
> > > > interfaces, according to previosus discussion.
> > > >
> > > > Below are some comparison data with fio tool. The fio command I used
> > > > is like below with changing the '--rw' parameter and enabling the
> > > > direct IO flag to measure the actual hardware transfer speed in 4K block
> > size.
> > > >
> > > > ./fio --filename=/dev/mmcblk0p30 --direct=1 --iodepth=20 --rw=read
> > > > --bs=4K --size=1G --group_reporting --numjobs=20 --name=test_read
> > > >
> > > > My eMMC card working at HS400 Enhanced strobe mode:
> > > > [ 2.229856] mmc0: new HS400 Enhanced strobe MMC card at address
> > 0001
> > > > [ 2.237566] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
> > > > [ 2.242621] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.00 MiB
> > > > [ 2.249110] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.00 MiB
> > > > [ 2.255307] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB,
> > chardev (248:0)
> > > >
> > > > 1. Without MMC software queue
> > > > I tested 5 times for each case and output a average speed.
> > > >
> > > > 1) Sequential read:
> > > > Speed: 59.4MiB/s, 63.4MiB/s, 57.5MiB/s, 57.2MiB/s, 60.8MiB/s Average
> > > > speed: 59.66MiB/s
> > > >
> > > > 2) Random read:
> > > > Speed: 26.9MiB/s, 26.9MiB/s, 27.1MiB/s, 27.1MiB/s, 27.2MiB/s Average
> > > > speed: 27.04MiB/s
> > > >
> > > > 3) Sequential write:
> > > > Speed: 71.6MiB/s, 72.5MiB/s, 72.2MiB/s, 64.6MiB/s, 67.5MiB/s Average
> > > > speed: 69.68MiB/s
> > > >
> > > > 4) Random write:
> > > > Speed: 36.3MiB/s, 35.4MiB/s, 38.6MiB/s, 34MiB/s, 35.5MiB/s Average
> > > > speed: 35.96MiB/s
> > > >
> > > > 2. With MMC software queue
> > > > I tested 5 times for each case and output a average speed.
> > > >
> > > > 1) Sequential read:
> > > > Speed: 59.2MiB/s, 60.4MiB/s, 63.6MiB/s, 60.3MiB/s, 59.9MiB/s Average
> > > > speed: 60.68MiB/s
> > > >
> > > > 2) Random read:
> > > > Speed: 31.3MiB/s, 31.4MiB/s, 31.5MiB/s, 31.3MiB/s, 31.3MiB/s Average
> > > > speed: 31.36MiB/s
> > > >
> > > > 3) Sequential write:
> > > > Speed: 71MiB/s, 71.8MiB/s, 72.3MiB/s, 72.2MiB/s, 71MiB/s Average
> > > > speed: 71.66MiB/s
> > > >
> > > > 4) Random write:
> > > > Speed: 68.9MiB/s, 68.7MiB/s, 68.8MiB/s, 68.6MiB/s, 68.8MiB/s Average
> > > > speed: 68.76MiB/s
> > > >
> > > > Form above data, we can see the MMC software queue can help to
> > > > improve some performance obviously for random read and write, though
> > > > no obvious improvement for sequential read and write.
> > > >
> > > > Any comments are welcome. Thanks a lot.
> > > >
>
> Hi Baolin,
>
> I refer to your code, and add the software queue support on i.MX based on the Linux next-20200602, but unfortunately, I see an obvious performance drop when change to use software queue.
> I test on our imx850-evk board, with eMMC soldered.
> From the result listing below, only random write has a little performance improve, for others, seems performance drop a lot.
> I noticed that, this software queue need no-removable card, any other limitation? For host?
> From the code logic, software queue complete the request in irq handler, seems no other change, I do not figure out why this will trigger a performance drop on my platform. Any comment would be appreciate!
Have you tested with below patches, which introduce an atomic_request
host ops to submit next request in the irq hard handler context to
reduce latency?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ed6330330276cba39058e8dbdb28ab8d013d926e
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a374a72baa817388a04825118b7c1ba13064c8c6
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=98a2642f91a47dcd1215d037c14e0e5de33a247d
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e872f1e22ea5f678ae42812949477387fda6725b
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=845c939ee22943786a6eb1d13d03c77b19fcc2c8
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6db96e5810e0a6a345b7d78549de7676ae5b2662
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=48ef8a2a1e5e6a2a189009e880e341ddb452971d
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=61ab64e2f54f4c607428667f83f411cb659843a3
> Without software queue, normal read/write method:
> Sequential read: 56MB/s
> Random read: 23.5MB/s
> Sequential write: 43.7MB/s
> Random write: 19MB/s
>
> With mmc software queue:
> Sequential read: 33.5MB/s
> Random read: 18.7 MB/s
> Sequential write: 37.7MB/s
> Random write: 19.8MB/s
>
>
> Here, I also list my change code to support software queue
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index eb85237bf2d6..996b8cc5c381 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -254,6 +254,7 @@ config MMC_SDHCI_ESDHC_IMX
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> select MMC_CQHCI
> + select MMC_HSQ
> help
> This selects the Freescale eSDHC/uSDHC controller support
> found on i.MX25, i.MX35 i.MX5x and i.MX6x.
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 1d7f84b23a22..6f163695b08d 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -29,6 +29,7 @@
> #include "sdhci-pltfm.h"
> #include "sdhci-esdhc.h"
> #include "cqhci.h"
> +#include "mmc_hsq.h"
>
> #define ESDHC_SYS_CTRL_DTOCV_MASK 0x0f
> #define ESDHC_CTRL_D3CD 0x08
> @@ -1220,6 +1221,15 @@ static u32 esdhc_cqhci_irq(struct sdhci_host *host, u32 intmask)
> return 0;
> }
>
> +static void esdhc_request_done(struct sdhci_host *host, struct mmc_request *mrq)
> +{
> + /* Validate if the request was from software queue firstly. */
> + if (mmc_hsq_finalize_request(host->mmc, mrq))
> + return;
> +
> + mmc_request_done(host->mmc, mrq);
> +}
> +
> static struct sdhci_ops sdhci_esdhc_ops = {
> .read_l = esdhc_readl_le,
> .read_w = esdhc_readw_le,
> @@ -1237,6 +1247,7 @@ static struct sdhci_ops sdhci_esdhc_ops = {
> .set_uhs_signaling = esdhc_set_uhs_signaling,
> .reset = esdhc_reset,
> .irq = esdhc_cqhci_irq,
> + .request_done = esdhc_request_done,
> };
>
> static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
> @@ -1301,6 +1312,19 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
> writel(tmp, host->ioaddr + ESDHC_VEND_SPEC2);
>
> host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
> +
> + /*
> + * On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card
> + * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the
> + * the 1st linux configure power/clock for the 2nd Linux.
> + *
> + * When the 2nd Linux is booting into rootfs stage, we let the 1st Linux
> + * to destroy the 2nd linux, then restart the 2nd linux, we met SDHCI dump.
> + * After we clear the pending interrupt and halt CQCTL, issue gone.
> + */
> + tmp = cqhci_readl(cq_host, CQHCI_IS);
> + cqhci_writel(cq_host, tmp, CQHCI_IS);
> + cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL);
> }
>
> if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
> @@ -1351,9 +1375,6 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
> * After we clear the pending interrupt and halt CQCTL, issue gone.
> */
> if (cq_host) {
> - tmp = cqhci_readl(cq_host, CQHCI_IS);
> - cqhci_writel(cq_host, tmp, CQHCI_IS);
> - cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL);
> }
> }
> }
> @@ -1555,6 +1576,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
> struct sdhci_pltfm_host *pltfm_host;
> struct sdhci_host *host;
> struct cqhci_host *cq_host;
> + struct mmc_hsq *hsq;
> int err;
> struct pltfm_imx_data *imx_data;
>
> @@ -1664,6 +1686,16 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
> err = cqhci_init(cq_host, host->mmc, false);
> if (err)
> goto disable_ahb_clk;
> + } else if (esdhc_is_usdhc(imx_data)) {
> + hsq = devm_kzalloc(&pdev->dev, sizeof(*hsq), GFP_KERNEL);
> + if (!hsq) {
> + err = -ENOMEM;
> + goto disable_ahb_clk;
> + }
> +
> + err = mmc_hsq_init(hsq, host->mmc);
> + if (err)
> + goto disable_ahb_clk;
> }
>
> if (of_id)
> @@ -1673,6 +1705,11 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
> if (err)
> goto disable_ahb_clk;
>
> + if (!mmc_card_is_removable(host->mmc))
> + host->mmc_host_ops.request_atomic = sdhci_request_atomic;
> + else
> + host->always_defer_done = true;
> +
> sdhci_esdhc_imx_hwinit(host);
>
> err = sdhci_add_host(host);
> @@ -1737,6 +1774,8 @@ static int sdhci_esdhc_suspend(struct device *dev)
> ret = cqhci_suspend(host->mmc);
> if (ret)
> return ret;
> + } else if (esdhc_is_usdhc(imx_data)) {
> + mmc_hsq_suspend(host->mmc);
> }
>
> if ((imx_data->socdata->flags & ESDHC_FLAG_STATE_LOST_IN_LPMODE) &&
> @@ -1764,6 +1803,8 @@ static int sdhci_esdhc_suspend(struct device *dev)
> static int sdhci_esdhc_resume(struct device *dev)
> {
> struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
> int ret;
>
> ret = pinctrl_pm_select_default_state(dev);
> @@ -1777,8 +1818,11 @@ static int sdhci_esdhc_resume(struct device *dev)
> if (ret)
> return ret;
>
> - if (host->mmc->caps2 & MMC_CAP2_CQE)
> + if (host->mmc->caps2 & MMC_CAP2_CQE) {
> ret = cqhci_resume(host->mmc);
> + } else if (esdhc_is_usdhc(imx_data)) {
> + mmc_hsq_resume(host->mmc);
> + }
>
> if (!ret)
> ret = mmc_gpio_set_cd_wake(host->mmc, false);
> @@ -1799,6 +1843,8 @@ static int sdhci_esdhc_runtime_suspend(struct device *dev)
> ret = cqhci_suspend(host->mmc);
> if (ret)
> return ret;
> + } else if (esdhc_is_usdhc(imx_data)) {
> + mmc_hsq_suspend(host->mmc);
> }
>
> ret = sdhci_runtime_suspend_host(host);
> @@ -1851,8 +1897,11 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
> if (err)
> goto disable_ipg_clk;
>
> - if (host->mmc->caps2 & MMC_CAP2_CQE)
> + if (host->mmc->caps2 & MMC_CAP2_CQE) {
> err = cqhci_resume(host->mmc);
> + } else if (esdhc_is_usdhc(imx_data)) {
> + mmc_hsq_resume(host->mmc);
> + }
>
> return err;
>
>
>
> > > > Changes from v8:
> > > > - Add more description in the commit message.
> > > > - Optimize the failure log when calling cqe_enable().
> > > >
> > > > Changes from v7:
> > > > - Add reviewed tag from Arnd.
> > > > - Use the 'hsq' acronym for varibles and functions in the core layer.
> > > > - Check the 'card->ext_csd.cmdq_en' in cqhci.c to make sure the CQE
> > > > can work normally.
> > > > - Add a new patch to enable the host software queue for the SD card.
> > > > - Use the default MMC queue depth for host software queue.
> > > >
> > > > Changes from v6:
> > > > - Change the patch order and set host->always_defer_done = true for
> > > > the Spreadtrum host driver.
> > > >
> > > > Changes from v5:
> > > > - Modify the condition of defering to complete request suggested by
> > Adrian.
> > > >
> > > > Changes from v4:
> > > > - Add a seperate patch to introduce a variable to defer to complete
> > > > data requests for some host drivers, when using host software queue.
> > > >
> > > > Changes from v3:
> > > > - Use host software queue instead of sqhci.
> > > > - Fix random config building issue.
> > > > - Change queue depth to 32, but still only allow 2 requests in flight.
> > > > - Update the testing data.
> > > >
> > > > Changes from v2:
> > > > - Remove reference to 'struct cqhci_host' and 'struct cqhci_slot',
> > > > instead adding 'struct sqhci_host', which is only used by software queue.
> > > >
> > > > Changes from v1:
> > > > - Add request_done ops for sdhci_ops.
> > > > - Replace virtual command queue with software queue for functions
> > > > and variables.
> > > > - Rename the software queue file and add sqhci.h header file.
> > > >
> > > > Baolin Wang (5):
> > > > mmc: Add MMC host software queue support
> > > > mmc: core: Enable the MMC host software queue for the SD card
> > > > mmc: host: sdhci: Add request_done ops for struct sdhci_ops
> > > > mmc: host: sdhci: Add a variable to defer to complete requests if
> > > > needed
> > > > mmc: host: sdhci-sprd: Add software queue support
> > > >
> > > > drivers/mmc/core/block.c | 61 ++++++++
> > > > drivers/mmc/core/mmc.c | 18 ++-
> > > > drivers/mmc/core/queue.c | 22 ++-
> > > > drivers/mmc/core/sd.c | 10 ++
> > > > drivers/mmc/host/Kconfig | 8 +
> > > > drivers/mmc/host/Makefile | 1 +
> > > > drivers/mmc/host/cqhci.c | 8 +-
> > > > drivers/mmc/host/mmc_hsq.c | 343
> > +++++++++++++++++++++++++++++++++++++++++
> > > > drivers/mmc/host/mmc_hsq.h | 30 ++++
> > > > drivers/mmc/host/sdhci-sprd.c | 28 ++++
> > > > drivers/mmc/host/sdhci.c | 14 +-
> > > > drivers/mmc/host/sdhci.h | 3 +
> > > > include/linux/mmc/host.h | 3 +
> > > > 13 files changed, 534 insertions(+), 15 deletions(-) create mode
> > > > 100644 drivers/mmc/host/mmc_hsq.c create mode 100644
> > > > drivers/mmc/host/mmc_hsq.h
> > > >
> > > > --
> > > > 1.7.9.5
> > > >
> > >
> > > Applied for next, thanks! Also, thanks for your patience while moving
> > > forward during the reviews!
> >
> > I am very appreciated for you and Arnd's good sugestion when introducing the
> > hsq.
> >
> > >
> > > Note, I did some amending of patch1 to resolve some checkpatch
> > > warnings. SPDX licence and Kconfig help texts, please have a look and
> > > tell if there are something that doesn't look good.
> >
> > Thanks for your help and looks good to me.
--
Baolin Wang
Powered by blists - more mailing lists