[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1591709203-12106-1-git-send-email-dillon.minfei@gmail.com>
Date: Tue, 9 Jun 2020 21:26:39 +0800
From: dillon.minfei@...il.com
To: robh+dt@...nel.org, mcoquelin.stm32@...il.com,
alexandre.torgue@...com, p.zabel@...gutronix.de,
pierre-yves.mordret@...com, philippe.schenker@...adex.com
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
linux-i2c@...r.kernel.org, devicetree@...r.kernel.org,
dillon min <dillon.minfei@...il.com>
Subject: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board
From: dillon min <dillon.minfei@...il.com>
This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
board with three dts and one i2c driver changes.
has been validated by ts_print tool
Changes log:
V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
V3: just add change log in [PATCH V3 3/4] below ---
V2: remove id, blocks, irq-trigger from stmpe811 dts
V1:
ARM: dts: stm32: add I2C3 support on STM32F429 SoC
ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
ARM: dts: stm32: enable stmpe811 on stm32429-disco board
i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
dillon min (4):
ARM: dts: stm32: add I2C3 support on STM32F429 SoC
ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
ARM: dts: stm32: enable stmpe811 on stm32429-disco board
i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
arch/arm/boot/dts/stm32f429-disco.dts | 47 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32f429.dtsi | 12 +++++++++
drivers/i2c/busses/i2c-stm32f4.c | 12 ++++++---
4 files changed, 80 insertions(+), 3 deletions(-)
--
2.7.4
Powered by blists - more mailing lists