| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200609212102.GA1416099@bogus>
Date: Tue, 9 Jun 2020 15:21:02 -0600
From: Rob Herring <robh@...nel.org>
To: Yong Wu <yong.wu@...iatek.com>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Joerg Roedel <joro@...tes.org>,
Evan Green <evgreen@...omium.org>,
Robin Murphy <robin.murphy@....com>,
Tomasz Figa <tfiga@...gle.com>,
Will Deacon <will.deacon@....com>,
linux-mediatek@...ts.infradead.org, srv_heupstream@...iatek.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
iommu@...ts.linux-foundation.org, youlin.pei@...iatek.com,
Nicolas Boichat <drinkcat@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>, anan.sun@...iatek.com,
cui.zhang@...iatek.com, chao.hao@...iatek.com,
ming-fan.chen@...iatek.com, eizan@...omium.org,
acourbot@...omium.org, Maoguang Meng <maoguang.meng@...iatek.com>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Irui Wang <irui.wang@...iatek.com>
Subject: Re: [PATCH v4 01/17] media: dt-binding: mtk-vcodec: Separating
mtk-vcodec encode node.
On Sat, May 30, 2020 at 04:10:02PM +0800, Yong Wu wrote:
> From: Maoguang Meng <maoguang.meng@...iatek.com>
>
> Update binding document since the avc and vp8 hardware encoder in
> mt8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
> "mediatek,mt8173-vcodec-vp8-enc" and "mediatek,mt8173-vcodec-avc-enc".
The h/w suddenly split in 2? You are breaking compatibility. Up to the
Mediatek maintainers to decide if that's okay, but you need to state you
are breaking compatibility (here and in the driver) and why that is
okay.
>
> This is a preparing patch for smi cleaning up "mediatek,larb".
>
> Signed-off-by: Maoguang Meng <maoguang.meng@...iatek.com>
> Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
> Signed-off-by: Irui Wang <irui.wang@...iatek.com>
> Signed-off-by: Yong Wu <yong.wu@...iatek.com>
> ---
> .../devicetree/bindings/media/mediatek-vcodec.txt | 58 ++++++++++++----------
> 1 file changed, 31 insertions(+), 27 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> index 8093335..1023740 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> @@ -4,7 +4,9 @@ Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
> supports high resolution encoding and decoding functionalities.
>
> Required properties:
> -- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder
> +- compatible : must be one of the following string:
> + "mediatek,mt8173-vcodec-vp8-enc" for mt8173 vp8 encoder.
> + "mediatek,mt8173-vcodec-avc-enc" for mt8173 avc encoder.
> "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
> "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
> - reg : Physical base address of the video codec registers and length of
> @@ -13,10 +15,11 @@ Required properties:
> - mediatek,larb : must contain the local arbiters in the current Socs.
> - clocks : list of clock specifiers, corresponding to entries in
> the clock-names property.
> -- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
> - "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
> - "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
> - "venc_lt_sel", "vdec_bus_clk_src".
> +- clock-names:
> + avc venc must contain "venc_sel";
> + vp8 venc must contain "venc_lt_sel";
> + decoder must contain "vcodecpll", "univpll_d2", "clk_cci400_sel",
> + "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel", "vdec_bus_clk_src".
> - iommus : should point to the respective IOMMU block with master port as
> argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> for details.
> @@ -80,14 +83,10 @@ vcodec_dec: vcodec@...00000 {
> assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
> };
>
> - vcodec_enc: vcodec@...02000 {
> - compatible = "mediatek,mt8173-vcodec-enc";
> - reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
> - <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
> - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> - <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> - mediatek,larb = <&larb3>,
> - <&larb5>;
> +vcodec_enc: vcodec@...02000 {
> + compatible = "mediatek,mt8173-vcodec-avc-enc";
> + reg = <0 0x18002000 0 0x1000>;
> + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
> iommus = <&iommu M4U_PORT_VENC_RCPU>,
> <&iommu M4U_PORT_VENC_REC>,
> <&iommu M4U_PORT_VENC_BSDMA>,
> @@ -98,8 +97,20 @@ vcodec_dec: vcodec@...00000 {
> <&iommu M4U_PORT_VENC_REF_LUMA>,
> <&iommu M4U_PORT_VENC_REF_CHROMA>,
> <&iommu M4U_PORT_VENC_NBM_RDMA>,
> - <&iommu M4U_PORT_VENC_NBM_WDMA>,
> - <&iommu M4U_PORT_VENC_RCPU_SET2>,
> + <&iommu M4U_PORT_VENC_NBM_WDMA>;
> + mediatek,larb = <&larb3>;
> + mediatek,vpu = <&vpu>;
> + clocks = <&topckgen CLK_TOP_VENC_SEL>;
> + clock-names = "venc_sel";
> + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
> + };
> +
> +vcodec_enc_lt: vcodec@...02000 {
> + compatible = "mediatek,mt8173-vcodec-vp8-enc";
> + reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
> + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> + iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
> <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
> <&iommu M4U_PORT_VENC_BSDMA_SET2>,
> <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
> @@ -108,17 +119,10 @@ vcodec_dec: vcodec@...00000 {
> <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
> <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
> <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
> + mediatek,larb = <&larb5>;
> mediatek,vpu = <&vpu>;
> - clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
> - <&topckgen CLK_TOP_VENC_SEL>,
> - <&topckgen CLK_TOP_UNIVPLL1_D2>,
> - <&topckgen CLK_TOP_VENC_LT_SEL>;
> - clock-names = "venc_sel_src",
> - "venc_sel",
> - "venc_lt_sel_src",
> - "venc_lt_sel";
> - assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
> - <&topckgen CLK_TOP_VENC_LT_SEL>;
> - assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
> - <&topckgen CLK_TOP_UNIVPLL1_D2>;
> + clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
> + clock-names = "venc_lt_sel";
> + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
> };
> --
> 1.9.1
Powered by blists - more mailing lists