lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6d23c903-abec-e2f8-1e63-c062211748c3@infradead.org>
Date:   Fri, 12 Jun 2020 20:28:14 -0700
From:   Randy Dunlap <rdunlap@...radead.org>
To:     Wesley Cheng <wcheng@...eaurora.org>, robh+dt@...nel.org,
        heikki.krogerus@...ux.intel.com, gregkh@...uxfoundation.org,
        mark.rutland@....com, broonie@...nel.org, lgirdwood@...il.com,
        agross@...nel.org, bjorn.andersson@...aro.org
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-usb@...r.kernel.org,
        lijun.kernel@...il.com, jackp@...eaurora.org,
        bryan.odonoghue@...aro.org
Subject: Re: [PATCH v2 4/6] regulator: Add support for QCOM PMIC VBUS booster

On 6/12/20 4:19 PM, Wesley Cheng wrote:
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 074a2ef55943..f9165f9f9051 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -797,6 +797,16 @@ config REGULATOR_QCOM_SPMI
>  	  Qualcomm SPMI PMICs as a module. The module will be named
>  	  "qcom_spmi-regulator".
>  
> +config REGULATOR_QCOM_USB_VBUS
> +	tristate "Qualcomm USB Vbus regulator driver"
> +	depends on SPMI || COMPILE_TEST
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  regulator used to enable the VBUS output.
> +
> +	  Say M here if you want to include support for enabling the VBUS output
> +	  as a module. The module will be named "qcom_usb-regulator".

Hi,
Shouldn't that module name match what is in the Makefile?


> +
>  config REGULATOR_RC5T583
>  	tristate "RICOH RC5T583 Power regulators"
>  	depends on MFD_RC5T583
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index c0d6b96ebd78..cbab28aa7b56 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
> +obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
>  obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
>  obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
>  obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o


thanks.
-- 
~Randy

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ