[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <ac93cc4e245316bb7e7426ac5ab0de8f3d919731.1592210452.git-series.maxime@cerno.tech>
Date: Mon, 15 Jun 2020 10:40:56 +0200
From: Maxime Ripard <maxime@...no.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc: linux-rpi-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Dave Stevenson <dave.stevenson@...pberrypi.com>,
Tim Gover <tim.gover@...pberrypi.com>,
Phil Elwell <phil@...pberrypi.com>,
Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
Philipp Zabel <p.zabel@...gutronix.de>,
Maxime Ripard <maxime@...no.tech>
Subject: [PATCH v5 16/27] clk: bcm: rpi: Rename is_prepared function
The raspberrypi_fw_pll_is_on function doesn't only apply to PLL
registered in the driver, but any clock exposed by the firmware.
Since we also implement the is_prepared hook, make the function
consistent with the other function names.
Cc: Michael Turquette <mturquette@...libre.com>
Cc: linux-clk@...r.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Reviewed-by: Stephen Boyd <sboyd@...nel.org>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
drivers/clk/bcm/clk-raspberrypi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 3fce49a65a79..58ac1b104429 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -85,7 +85,7 @@ static int raspberrypi_clock_property(struct rpi_firmware *firmware,
return 0;
}
-static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
+static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
{
struct raspberrypi_clk_data *data =
container_of(hw, struct raspberrypi_clk_data, hw);
@@ -166,7 +166,7 @@ static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
}
static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
- .is_prepared = raspberrypi_fw_pll_is_on,
+ .is_prepared = raspberrypi_fw_is_prepared,
.recalc_rate = raspberrypi_fw_pll_get_rate,
.set_rate = raspberrypi_fw_pll_set_rate,
.determine_rate = raspberrypi_pll_determine_rate,
--
git-series 0.9.1
Powered by blists - more mailing lists