linux-kernel - Re: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 15 Jun 2020 11:08:47 +0200
From:   Alexandre Torgue <alexandre.torgue@...com>
To:     <dillon.minfei@...il.com>, <robh+dt@...nel.org>,
        <mcoquelin.stm32@...il.com>, <p.zabel@...gutronix.de>,
        <pierre-yves.mordret@...com>, <philippe.schenker@...adex.com>
CC:     <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-i2c@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco
 board

Hi Dillon

On 6/9/20 3:26 PM, dillon.minfei@...il.com wrote:
> From: dillon min <dillon.minfei@...il.com>
> 
> This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
> board with three dts and one i2c driver changes.
> 
> has been validated by ts_print tool
> 
> Changes log:
> V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
> 
> V3: just add change log in [PATCH V3 3/4] below ---
> 
> V2: remove id, blocks, irq-trigger from stmpe811 dts
> 
> V1:
> ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> 
> dillon min (4):
>    ARM: dts: stm32: add I2C3 support on STM32F429 SoC
>    ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
>    ARM: dts: stm32: enable stmpe811 on stm32429-disco board
>    i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> 
>   arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
>   arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
>   drivers/i2c/busses/i2c-stm32f4.c       | 12 ++++++---
>   4 files changed, 80 insertions(+), 3 deletions(-)
> 

DT patches applied on stm32-next. I changed node ordering in patch 3.

Thanks
Alex