linux-kernel - Re: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAL9mu0JsCOrnt=ROr-0_GByKeb6yeq5YwygzS+S9i=SMjgL6kQ@mail.gmail.com>
Date:   Mon, 15 Jun 2020 18:06:50 +0800
From:   dillon min <dillon.minfei@...il.com>
To:     Alexandre Torgue <alexandre.torgue@...com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        p.zabel@...gutronix.de, pierre-yves.mordret@...com,
        Philippe Schenker <philippe.schenker@...adex.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        linux-stm32@...md-mailman.stormreply.com,
        linux-i2c@...r.kernel.org,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>
Subject: Re: [PATCH v4 0/4] Enable stmpe811 touch screen on stm32f429-disco board

On Mon, Jun 15, 2020 at 5:08 PM Alexandre Torgue
<alexandre.torgue@...com> wrote:
>
> Hi Dillon
>
> On 6/9/20 3:26 PM, dillon.minfei@...il.com wrote:
> > From: dillon min <dillon.minfei@...il.com>
> >
> > This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
> > board with three dts and one i2c driver changes.
> >
> > has been validated by ts_print tool
> >
> > Changes log:
> > V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
> >
> > V3: just add change log in [PATCH V3 3/4] below ---
> >
> > V2: remove id, blocks, irq-trigger from stmpe811 dts
> >
> > V1:
> > ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> > ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> > ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> > i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> > dillon min (4):
> >    ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> >    ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> >    ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> >    i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> >   arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
> >   arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
> >   arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
> >   drivers/i2c/busses/i2c-stm32f4.c       | 12 ++++++---
> >   4 files changed, 80 insertions(+), 3 deletions(-)
> >
>
> DT patches applied on stm32-next. I changed node ordering in patch 3.
Okay, thanks.

Regards,
Dillon,
>
> Thanks
> Alex