| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200623065744.18393-2-rppt@kernel.org>
Date: Tue, 23 Jun 2020 09:57:37 +0300
From: Mike Rapoport <rppt@...nel.org>
To: linux-kernel@...r.kernel.org
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Arnd Bergmann <arnd@...db.de>,
Guenter Roeck <linux@...ck-us.net>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Mike Rapoport <rppt@...nel.org>,
Mike Rapoport <rppt@...ux.ibm.com>
Subject: [PATCH 1/8] arch: remove unicore32 port
From: Mike Rapoport <rppt@...ux.ibm.com>
The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.
Guenter Roeck says:
I have stopped building unicore32 images since v4.19 since there is no
available compiler that is still supported by the kernel. I am surprised
that support for it has not been removed from the kernel.
Remove unicore32 port.
Signed-off-by: Mike Rapoport <rppt@...ux.ibm.com>
---
.../features/core/cBPF-JIT/arch-support.txt | 1 -
.../features/core/eBPF-JIT/arch-support.txt | 1 -
.../core/generic-idle-thread/arch-support.txt | 1 -
.../core/jump-labels/arch-support.txt | 1 -
.../features/core/tracehook/arch-support.txt | 1 -
.../features/debug/KASAN/arch-support.txt | 1 -
.../debug/debug-vm-pgtable/arch-support.txt | 1 -
.../debug/gcov-profile-all/arch-support.txt | 1 -
.../features/debug/kgdb/arch-support.txt | 1 -
.../debug/kprobes-on-ftrace/arch-support.txt | 1 -
.../features/debug/kprobes/arch-support.txt | 1 -
.../debug/kretprobes/arch-support.txt | 1 -
.../features/debug/optprobes/arch-support.txt | 1 -
.../debug/stackprotector/arch-support.txt | 1 -
.../features/debug/uprobes/arch-support.txt | 1 -
.../debug/user-ret-profiler/arch-support.txt | 1 -
.../io/dma-contiguous/arch-support.txt | 1 -
.../locking/cmpxchg-local/arch-support.txt | 1 -
.../features/locking/lockdep/arch-support.txt | 1 -
.../locking/queued-rwlocks/arch-support.txt | 1 -
.../locking/queued-spinlocks/arch-support.txt | 1 -
.../perf/kprobes-event/arch-support.txt | 1 -
.../features/perf/perf-regs/arch-support.txt | 1 -
.../perf/perf-stackdump/arch-support.txt | 1 -
.../membarrier-sync-core/arch-support.txt | 1 -
.../sched/numa-balancing/arch-support.txt | 1 -
.../seccomp/seccomp-filter/arch-support.txt | 1 -
.../time/arch-tick-broadcast/arch-support.txt | 1 -
.../time/clockevents/arch-support.txt | 1 -
.../time/context-tracking/arch-support.txt | 1 -
.../time/irq-time-acct/arch-support.txt | 1 -
.../time/modern-timekeeping/arch-support.txt | 1 -
.../time/virt-cpuacct/arch-support.txt | 1 -
.../features/vm/ELF-ASLR/arch-support.txt | 1 -
.../features/vm/PG_uncached/arch-support.txt | 1 -
.../features/vm/THP/arch-support.txt | 1 -
.../features/vm/TLB/arch-support.txt | 1 -
.../features/vm/huge-vmap/arch-support.txt | 1 -
.../features/vm/ioremap_prot/arch-support.txt | 1 -
.../features/vm/pte_special/arch-support.txt | 1 -
MAINTAINERS | 7 -
arch/unicore32/.gitignore | 22 -
arch/unicore32/Kconfig | 200 -----
arch/unicore32/Kconfig.debug | 29 -
arch/unicore32/Makefile | 59 --
arch/unicore32/boot/Makefile | 39 -
arch/unicore32/boot/compressed/Makefile | 64 --
arch/unicore32/boot/compressed/head.S | 201 -----
arch/unicore32/boot/compressed/misc.c | 123 ---
arch/unicore32/boot/compressed/piggy.S.in | 6 -
arch/unicore32/boot/compressed/vmlinux.lds.S | 58 --
arch/unicore32/configs/defconfig | 214 -----
arch/unicore32/include/asm/Kbuild | 7 -
arch/unicore32/include/asm/assembler.h | 128 ---
arch/unicore32/include/asm/barrier.h | 16 -
arch/unicore32/include/asm/bitops.h | 46 -
arch/unicore32/include/asm/bug.h | 20 -
arch/unicore32/include/asm/cache.h | 24 -
arch/unicore32/include/asm/cacheflush.h | 186 ----
arch/unicore32/include/asm/checksum.h | 38 -
arch/unicore32/include/asm/cmpxchg.h | 58 --
arch/unicore32/include/asm/cpu-single.h | 42 -
arch/unicore32/include/asm/cputype.h | 30 -
arch/unicore32/include/asm/delay.h | 49 --
arch/unicore32/include/asm/dma.h | 20 -
arch/unicore32/include/asm/elf.h | 90 --
arch/unicore32/include/asm/fpstate.h | 23 -
arch/unicore32/include/asm/fpu-ucf64.h | 50 --
arch/unicore32/include/asm/gpio.h | 101 ---
arch/unicore32/include/asm/hwcap.h | 29 -
arch/unicore32/include/asm/hwdef-copro.h | 45 -
arch/unicore32/include/asm/io.h | 69 --
arch/unicore32/include/asm/irq.h | 102 ---
arch/unicore32/include/asm/irqflags.h | 50 --
arch/unicore32/include/asm/linkage.h | 19 -
arch/unicore32/include/asm/memblock.h | 43 -
arch/unicore32/include/asm/memory.h | 102 ---
arch/unicore32/include/asm/mmu.h | 14 -
arch/unicore32/include/asm/mmu_context.h | 98 ---
arch/unicore32/include/asm/page.h | 74 --
arch/unicore32/include/asm/pci.h | 20 -
arch/unicore32/include/asm/pgalloc.h | 87 --
arch/unicore32/include/asm/pgtable-hwdef.h | 51 --
arch/unicore32/include/asm/pgtable.h | 267 ------
arch/unicore32/include/asm/processor.h | 74 --
arch/unicore32/include/asm/ptrace.h | 58 --
arch/unicore32/include/asm/stacktrace.h | 28 -
arch/unicore32/include/asm/string.h | 35 -
arch/unicore32/include/asm/suspend.h | 26 -
arch/unicore32/include/asm/switch_to.h | 27 -
arch/unicore32/include/asm/syscall.h | 12 -
arch/unicore32/include/asm/thread_info.h | 133 ---
arch/unicore32/include/asm/timex.h | 31 -
arch/unicore32/include/asm/tlb.h | 24 -
arch/unicore32/include/asm/tlbflush.h | 192 -----
arch/unicore32/include/asm/traps.h | 18 -
arch/unicore32/include/asm/uaccess.h | 38 -
arch/unicore32/include/asm/vmalloc.h | 4 -
arch/unicore32/include/mach/PKUnity.h | 95 ---
arch/unicore32/include/mach/bitfield.h | 21 -
arch/unicore32/include/mach/dma.h | 45 -
arch/unicore32/include/mach/hardware.h | 30 -
arch/unicore32/include/mach/map.h | 17 -
arch/unicore32/include/mach/memory.h | 54 --
arch/unicore32/include/mach/ocd.h | 33 -
arch/unicore32/include/mach/pm.h | 37 -
arch/unicore32/include/mach/regs-ac97.h | 33 -
arch/unicore32/include/mach/regs-dmac.h | 82 --
arch/unicore32/include/mach/regs-gpio.h | 71 --
arch/unicore32/include/mach/regs-i2c.h | 64 --
arch/unicore32/include/mach/regs-intc.h | 29 -
arch/unicore32/include/mach/regs-nand.h | 80 --
arch/unicore32/include/mach/regs-ost.h | 91 --
arch/unicore32/include/mach/regs-pci.h | 95 ---
arch/unicore32/include/mach/regs-pm.h | 127 ---
arch/unicore32/include/mach/regs-ps2.h | 21 -
arch/unicore32/include/mach/regs-resetc.h | 35 -
arch/unicore32/include/mach/regs-rtc.h | 38 -
arch/unicore32/include/mach/regs-sdc.h | 157 ----
arch/unicore32/include/mach/regs-spi.h | 99 ---
arch/unicore32/include/mach/regs-uart.h | 3 -
arch/unicore32/include/mach/regs-umal.h | 230 -----
arch/unicore32/include/mach/regs-unigfx.h | 201 -----
arch/unicore32/include/mach/uncompress.h | 31 -
arch/unicore32/include/uapi/asm/Kbuild | 2 -
arch/unicore32/include/uapi/asm/byteorder.h | 25 -
arch/unicore32/include/uapi/asm/ptrace.h | 91 --
arch/unicore32/include/uapi/asm/sigcontext.h | 30 -
arch/unicore32/include/uapi/asm/unistd.h | 21 -
arch/unicore32/kernel/Makefile | 31 -
arch/unicore32/kernel/asm-offsets.c | 108 ---
arch/unicore32/kernel/clock.c | 387 ---------
arch/unicore32/kernel/debug-macro.S | 86 --
arch/unicore32/kernel/debug.S | 82 --
arch/unicore32/kernel/dma.c | 179 ----
arch/unicore32/kernel/early_printk.c | 46 -
arch/unicore32/kernel/elf.c | 35 -
arch/unicore32/kernel/entry.S | 802 ------------------
arch/unicore32/kernel/fpu-ucf64.c | 117 ---
arch/unicore32/kernel/gpio.c | 121 ---
arch/unicore32/kernel/head.S | 249 ------
arch/unicore32/kernel/hibernate.c | 159 ----
arch/unicore32/kernel/hibernate_asm.S | 114 ---
arch/unicore32/kernel/irq.c | 371 --------
arch/unicore32/kernel/ksyms.c | 57 --
arch/unicore32/kernel/ksyms.h | 14 -
arch/unicore32/kernel/module.c | 105 ---
arch/unicore32/kernel/pci.c | 371 --------
arch/unicore32/kernel/pm.c | 121 ---
arch/unicore32/kernel/process.c | 319 -------
arch/unicore32/kernel/ptrace.c | 147 ----
arch/unicore32/kernel/puv3-core.c | 276 ------
arch/unicore32/kernel/puv3-nb0916.c | 147 ----
arch/unicore32/kernel/setup.c | 352 --------
arch/unicore32/kernel/setup.h | 36 -
arch/unicore32/kernel/signal.c | 424 ---------
arch/unicore32/kernel/sleep.S | 199 -----
arch/unicore32/kernel/stacktrace.c | 127 ---
arch/unicore32/kernel/sys.c | 37 -
arch/unicore32/kernel/time.c | 128 ---
arch/unicore32/kernel/traps.c | 322 -------
arch/unicore32/kernel/vmlinux.lds.S | 59 --
arch/unicore32/lib/Makefile | 28 -
arch/unicore32/lib/backtrace.S | 168 ----
arch/unicore32/lib/clear_user.S | 54 --
arch/unicore32/lib/copy_from_user.S | 101 ---
arch/unicore32/lib/copy_page.S | 36 -
arch/unicore32/lib/copy_template.S | 211 -----
arch/unicore32/lib/copy_to_user.S | 93 --
arch/unicore32/lib/delay.S | 48 --
arch/unicore32/lib/findbit.S | 97 ---
arch/unicore32/lib/strncpy_from_user.S | 42 -
arch/unicore32/lib/strnlen_user.S | 39 -
arch/unicore32/mm/Kconfig | 41 -
arch/unicore32/mm/Makefile | 14 -
arch/unicore32/mm/alignment.c | 524 ------------
arch/unicore32/mm/cache-ucv2.S | 209 -----
arch/unicore32/mm/extable.c | 21 -
arch/unicore32/mm/fault.c | 481 -----------
arch/unicore32/mm/flush.c | 94 --
arch/unicore32/mm/init.c | 261 ------
arch/unicore32/mm/ioremap.c | 242 ------
arch/unicore32/mm/mm.h | 31 -
arch/unicore32/mm/mmu.c | 513 -----------
arch/unicore32/mm/pgd.c | 102 ---
arch/unicore32/mm/proc-macros.S | 142 ----
arch/unicore32/mm/proc-syms.c | 19 -
arch/unicore32/mm/proc-ucv2.S | 131 ---
arch/unicore32/mm/tlb-ucv2.S | 86 --
kernel/reboot.c | 2 +-
190 files changed, 1 insertion(+), 15705 deletions(-)
delete mode 100644 arch/unicore32/.gitignore
delete mode 100644 arch/unicore32/Kconfig
delete mode 100644 arch/unicore32/Kconfig.debug
delete mode 100644 arch/unicore32/Makefile
delete mode 100644 arch/unicore32/boot/Makefile
delete mode 100644 arch/unicore32/boot/compressed/Makefile
delete mode 100644 arch/unicore32/boot/compressed/head.S
delete mode 100644 arch/unicore32/boot/compressed/misc.c
delete mode 100644 arch/unicore32/boot/compressed/piggy.S.in
delete mode 100644 arch/unicore32/boot/compressed/vmlinux.lds.S
delete mode 100644 arch/unicore32/configs/defconfig
delete mode 100644 arch/unicore32/include/asm/Kbuild
delete mode 100644 arch/unicore32/include/asm/assembler.h
delete mode 100644 arch/unicore32/include/asm/barrier.h
delete mode 100644 arch/unicore32/include/asm/bitops.h
delete mode 100644 arch/unicore32/include/asm/bug.h
delete mode 100644 arch/unicore32/include/asm/cache.h
delete mode 100644 arch/unicore32/include/asm/cacheflush.h
delete mode 100644 arch/unicore32/include/asm/checksum.h
delete mode 100644 arch/unicore32/include/asm/cmpxchg.h
delete mode 100644 arch/unicore32/include/asm/cpu-single.h
delete mode 100644 arch/unicore32/include/asm/cputype.h
delete mode 100644 arch/unicore32/include/asm/delay.h
delete mode 100644 arch/unicore32/include/asm/dma.h
delete mode 100644 arch/unicore32/include/asm/elf.h
delete mode 100644 arch/unicore32/include/asm/fpstate.h
delete mode 100644 arch/unicore32/include/asm/fpu-ucf64.h
delete mode 100644 arch/unicore32/include/asm/gpio.h
delete mode 100644 arch/unicore32/include/asm/hwcap.h
delete mode 100644 arch/unicore32/include/asm/hwdef-copro.h
delete mode 100644 arch/unicore32/include/asm/io.h
delete mode 100644 arch/unicore32/include/asm/irq.h
delete mode 100644 arch/unicore32/include/asm/irqflags.h
delete mode 100644 arch/unicore32/include/asm/linkage.h
delete mode 100644 arch/unicore32/include/asm/memblock.h
delete mode 100644 arch/unicore32/include/asm/memory.h
delete mode 100644 arch/unicore32/include/asm/mmu.h
delete mode 100644 arch/unicore32/include/asm/mmu_context.h
delete mode 100644 arch/unicore32/include/asm/page.h
delete mode 100644 arch/unicore32/include/asm/pci.h
delete mode 100644 arch/unicore32/include/asm/pgalloc.h
delete mode 100644 arch/unicore32/include/asm/pgtable-hwdef.h
delete mode 100644 arch/unicore32/include/asm/pgtable.h
delete mode 100644 arch/unicore32/include/asm/processor.h
delete mode 100644 arch/unicore32/include/asm/ptrace.h
delete mode 100644 arch/unicore32/include/asm/stacktrace.h
delete mode 100644 arch/unicore32/include/asm/string.h
delete mode 100644 arch/unicore32/include/asm/suspend.h
delete mode 100644 arch/unicore32/include/asm/switch_to.h
delete mode 100644 arch/unicore32/include/asm/syscall.h
delete mode 100644 arch/unicore32/include/asm/thread_info.h
delete mode 100644 arch/unicore32/include/asm/timex.h
delete mode 100644 arch/unicore32/include/asm/tlb.h
delete mode 100644 arch/unicore32/include/asm/tlbflush.h
delete mode 100644 arch/unicore32/include/asm/traps.h
delete mode 100644 arch/unicore32/include/asm/uaccess.h
delete mode 100644 arch/unicore32/include/asm/vmalloc.h
delete mode 100644 arch/unicore32/include/mach/PKUnity.h
delete mode 100644 arch/unicore32/include/mach/bitfield.h
delete mode 100644 arch/unicore32/include/mach/dma.h
delete mode 100644 arch/unicore32/include/mach/hardware.h
delete mode 100644 arch/unicore32/include/mach/map.h
delete mode 100644 arch/unicore32/include/mach/memory.h
delete mode 100644 arch/unicore32/include/mach/ocd.h
delete mode 100644 arch/unicore32/include/mach/pm.h
delete mode 100644 arch/unicore32/include/mach/regs-ac97.h
delete mode 100644 arch/unicore32/include/mach/regs-dmac.h
delete mode 100644 arch/unicore32/include/mach/regs-gpio.h
delete mode 100644 arch/unicore32/include/mach/regs-i2c.h
delete mode 100644 arch/unicore32/include/mach/regs-intc.h
delete mode 100644 arch/unicore32/include/mach/regs-nand.h
delete mode 100644 arch/unicore32/include/mach/regs-ost.h
delete mode 100644 arch/unicore32/include/mach/regs-pci.h
delete mode 100644 arch/unicore32/include/mach/regs-pm.h
delete mode 100644 arch/unicore32/include/mach/regs-ps2.h
delete mode 100644 arch/unicore32/include/mach/regs-resetc.h
delete mode 100644 arch/unicore32/include/mach/regs-rtc.h
delete mode 100644 arch/unicore32/include/mach/regs-sdc.h
delete mode 100644 arch/unicore32/include/mach/regs-spi.h
delete mode 100644 arch/unicore32/include/mach/regs-uart.h
delete mode 100644 arch/unicore32/include/mach/regs-umal.h
delete mode 100644 arch/unicore32/include/mach/regs-unigfx.h
delete mode 100644 arch/unicore32/include/mach/uncompress.h
delete mode 100644 arch/unicore32/include/uapi/asm/Kbuild
delete mode 100644 arch/unicore32/include/uapi/asm/byteorder.h
delete mode 100644 arch/unicore32/include/uapi/asm/ptrace.h
delete mode 100644 arch/unicore32/include/uapi/asm/sigcontext.h
delete mode 100644 arch/unicore32/include/uapi/asm/unistd.h
delete mode 100644 arch/unicore32/kernel/Makefile
delete mode 100644 arch/unicore32/kernel/asm-offsets.c
delete mode 100644 arch/unicore32/kernel/clock.c
delete mode 100644 arch/unicore32/kernel/debug-macro.S
delete mode 100644 arch/unicore32/kernel/debug.S
delete mode 100644 arch/unicore32/kernel/dma.c
delete mode 100644 arch/unicore32/kernel/early_printk.c
delete mode 100644 arch/unicore32/kernel/elf.c
delete mode 100644 arch/unicore32/kernel/entry.S
delete mode 100644 arch/unicore32/kernel/fpu-ucf64.c
delete mode 100644 arch/unicore32/kernel/gpio.c
delete mode 100644 arch/unicore32/kernel/head.S
delete mode 100644 arch/unicore32/kernel/hibernate.c
delete mode 100644 arch/unicore32/kernel/hibernate_asm.S
delete mode 100644 arch/unicore32/kernel/irq.c
delete mode 100644 arch/unicore32/kernel/ksyms.c
delete mode 100644 arch/unicore32/kernel/ksyms.h
delete mode 100644 arch/unicore32/kernel/module.c
delete mode 100644 arch/unicore32/kernel/pci.c
delete mode 100644 arch/unicore32/kernel/pm.c
delete mode 100644 arch/unicore32/kernel/process.c
delete mode 100644 arch/unicore32/kernel/ptrace.c
delete mode 100644 arch/unicore32/kernel/puv3-core.c
delete mode 100644 arch/unicore32/kernel/puv3-nb0916.c
delete mode 100644 arch/unicore32/kernel/setup.c
delete mode 100644 arch/unicore32/kernel/setup.h
delete mode 100644 arch/unicore32/kernel/signal.c
delete mode 100644 arch/unicore32/kernel/sleep.S
delete mode 100644 arch/unicore32/kernel/stacktrace.c
delete mode 100644 arch/unicore32/kernel/sys.c
delete mode 100644 arch/unicore32/kernel/time.c
delete mode 100644 arch/unicore32/kernel/traps.c
delete mode 100644 arch/unicore32/kernel/vmlinux.lds.S
delete mode 100644 arch/unicore32/lib/Makefile
delete mode 100644 arch/unicore32/lib/backtrace.S
delete mode 100644 arch/unicore32/lib/clear_user.S
delete mode 100644 arch/unicore32/lib/copy_from_user.S
delete mode 100644 arch/unicore32/lib/copy_page.S
delete mode 100644 arch/unicore32/lib/copy_template.S
delete mode 100644 arch/unicore32/lib/copy_to_user.S
delete mode 100644 arch/unicore32/lib/delay.S
delete mode 100644 arch/unicore32/lib/findbit.S
delete mode 100644 arch/unicore32/lib/strncpy_from_user.S
delete mode 100644 arch/unicore32/lib/strnlen_user.S
delete mode 100644 arch/unicore32/mm/Kconfig
delete mode 100644 arch/unicore32/mm/Makefile
delete mode 100644 arch/unicore32/mm/alignment.c
delete mode 100644 arch/unicore32/mm/cache-ucv2.S
delete mode 100644 arch/unicore32/mm/extable.c
delete mode 100644 arch/unicore32/mm/fault.c
delete mode 100644 arch/unicore32/mm/flush.c
delete mode 100644 arch/unicore32/mm/init.c
delete mode 100644 arch/unicore32/mm/ioremap.c
delete mode 100644 arch/unicore32/mm/mm.h
delete mode 100644 arch/unicore32/mm/mmu.c
delete mode 100644 arch/unicore32/mm/pgd.c
delete mode 100644 arch/unicore32/mm/proc-macros.S
delete mode 100644 arch/unicore32/mm/proc-syms.c
delete mode 100644 arch/unicore32/mm/proc-ucv2.S
delete mode 100644 arch/unicore32/mm/tlb-ucv2.S
diff --git a/Documentation/features/core/cBPF-JIT/arch-support.txt b/Documentation/features/core/cBPF-JIT/arch-support.txt
index 8620c38d4db0..399935616813 100644
--- a/Documentation/features/core/cBPF-JIT/arch-support.txt
+++ b/Documentation/features/core/cBPF-JIT/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | TODO |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/core/eBPF-JIT/arch-support.txt b/Documentation/features/core/eBPF-JIT/arch-support.txt
index 9ed964f65224..79409bfe0263 100644
--- a/Documentation/features/core/eBPF-JIT/arch-support.txt
+++ b/Documentation/features/core/eBPF-JIT/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt
index 365df2c2ff0b..9ea60e416efd 100644
--- a/Documentation/features/core/generic-idle-thread/arch-support.txt
+++ b/Documentation/features/core/generic-idle-thread/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt
index 632a1c7aefa2..f8ec5c13cde4 100644
--- a/Documentation/features/core/jump-labels/arch-support.txt
+++ b/Documentation/features/core/jump-labels/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt
index 964667052eda..cd3510e2eedb 100644
--- a/Documentation/features/core/tracehook/arch-support.txt
+++ b/Documentation/features/core/tracehook/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt
index 6ff38548923e..c3fe9b266e7b 100644
--- a/Documentation/features/debug/KASAN/arch-support.txt
+++ b/Documentation/features/debug/KASAN/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
index c527d05c0459..ca6bacb1e99e 100644
--- a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
+++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt
index 210256f6a4cf..7563a494ddb8 100644
--- a/Documentation/features/debug/gcov-profile-all/arch-support.txt
+++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt
index 38c40cfa0578..4b0a1d0d6ba4 100644
--- a/Documentation/features/debug/kgdb/arch-support.txt
+++ b/Documentation/features/debug/kgdb/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt
index 97cd7aa74905..6225cfe0c5bf 100644
--- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt
+++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt
index 8b316c6e03d4..371f0ac488f5 100644
--- a/Documentation/features/debug/kprobes/arch-support.txt
+++ b/Documentation/features/debug/kprobes/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt
index b805aada395e..38e95251deed 100644
--- a/Documentation/features/debug/kretprobes/arch-support.txt
+++ b/Documentation/features/debug/kretprobes/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt
index fb297a88f62c..7f4a20e6a12b 100644
--- a/Documentation/features/debug/optprobes/arch-support.txt
+++ b/Documentation/features/debug/optprobes/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt
index 12410f606edc..3db4763aa3f5 100644
--- a/Documentation/features/debug/stackprotector/arch-support.txt
+++ b/Documentation/features/debug/stackprotector/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt
index be8acbb95b54..43cac6ee0c68 100644
--- a/Documentation/features/debug/uprobes/arch-support.txt
+++ b/Documentation/features/debug/uprobes/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt
index 6bfa36b0e017..d636ed0e679f 100644
--- a/Documentation/features/debug/user-ret-profiler/arch-support.txt
+++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt
index 895c3b0f6492..dfc93d074e3d 100644
--- a/Documentation/features/io/dma-contiguous/arch-support.txt
+++ b/Documentation/features/io/dma-contiguous/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt
index 242ff5a6586e..1815c7fed06d 100644
--- a/Documentation/features/locking/cmpxchg-local/arch-support.txt
+++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt
index 98cb9d85c55d..4f844ecd0680 100644
--- a/Documentation/features/locking/lockdep/arch-support.txt
+++ b/Documentation/features/locking/lockdep/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | ok |
- | unicore32: | ok |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt
index ee922746a64c..5c6bcfcf8e1f 100644
--- a/Documentation/features/locking/queued-rwlocks/arch-support.txt
+++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt
index c52116c1a049..b55e420a34ea 100644
--- a/Documentation/features/locking/queued-spinlocks/arch-support.txt
+++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt
index 518f352fc727..04c17c2106a4 100644
--- a/Documentation/features/perf/kprobes-event/arch-support.txt
+++ b/Documentation/features/perf/kprobes-event/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt
index c22cd6f8aa5e..e7450fbb8253 100644
--- a/Documentation/features/perf/perf-regs/arch-support.txt
+++ b/Documentation/features/perf/perf-regs/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt
index 527fe4d0b074..98e79d128d9b 100644
--- a/Documentation/features/perf/perf-stackdump/arch-support.txt
+++ b/Documentation/features/perf/perf-stackdump/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
index 8a521a622966..68658a6f8c5b 100644
--- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt
+++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
@@ -51,7 +51,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt
index 350823692f28..964457ad26c1 100644
--- a/Documentation/features/sched/numa-balancing/arch-support.txt
+++ b/Documentation/features/sched/numa-balancing/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | .. |
| sparc: | TODO |
| um: | .. |
- | unicore32: | .. |
| x86: | ok |
| xtensa: | .. |
-----------------------
diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
index c7b837f735b1..f54ddfc06a12 100644
--- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt
+++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | ok |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt
index 593536f7925b..4d11cbb3c09b 100644
--- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt
+++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | TODO |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index 7a27157da408..8287b6aa522e 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | ok |
- | unicore32: | ok |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt
index 048bfb6d3872..a71f3a945285 100644
--- a/Documentation/features/time/context-tracking/arch-support.txt
+++ b/Documentation/features/time/context-tracking/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt
index a14bbad8e948..d9082b91f10e 100644
--- a/Documentation/features/time/irq-time-acct/arch-support.txt
+++ b/Documentation/features/time/irq-time-acct/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | .. |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt
index 1d46da165b75..a84c3b9d9a94 100644
--- a/Documentation/features/time/modern-timekeeping/arch-support.txt
+++ b/Documentation/features/time/modern-timekeeping/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | ok |
- | unicore32: | ok |
| x86: | ok |
| xtensa: | ok |
-----------------------
diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt
index fb0d0cab9cab..56b372da6b01 100644
--- a/Documentation/features/time/virt-cpuacct/arch-support.txt
+++ b/Documentation/features/time/virt-cpuacct/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt
index adc25878d217..eccda0732474 100644
--- a/Documentation/features/vm/ELF-ASLR/arch-support.txt
+++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt
index f05588f9e4b4..c74e3f8040e1 100644
--- a/Documentation/features/vm/PG_uncached/arch-support.txt
+++ b/Documentation/features/vm/PG_uncached/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt
index cdfe8925f881..1c0b95f2b40d 100644
--- a/Documentation/features/vm/THP/arch-support.txt
+++ b/Documentation/features/vm/THP/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | .. |
| sparc: | ok |
| um: | .. |
- | unicore32: | .. |
| x86: | ok |
| xtensa: | .. |
-----------------------
diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt
index 2bdd3b6cee3c..30f75a79ce01 100644
--- a/Documentation/features/vm/TLB/arch-support.txt
+++ b/Documentation/features/vm/TLB/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | .. |
- | unicore32: | .. |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt
index 8525f1981f19..c5ff3a427722 100644
--- a/Documentation/features/vm/huge-vmap/arch-support.txt
+++ b/Documentation/features/vm/huge-vmap/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | TODO |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt
index 3a6b87de6a19..1cb7406cd858 100644
--- a/Documentation/features/vm/ioremap_prot/arch-support.txt
+++ b/Documentation/features/vm/ioremap_prot/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | TODO |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt
index 2e017387e228..13d0e1e17001 100644
--- a/Documentation/features/vm/pte_special/arch-support.txt
+++ b/Documentation/features/vm/pte_special/arch-support.txt
@@ -28,7 +28,6 @@
| sh: | ok |
| sparc: | ok |
| um: | TODO |
- | unicore32: | TODO |
| x86: | ok |
| xtensa: | TODO |
-----------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 301330e02bca..62b8105f1331 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17521,13 +17521,6 @@ L: linux-fsdevel@...r.kernel.org
S: Supported
F: fs/unicode/
-UNICORE32 ARCHITECTURE
-M: Guan Xuetao <gxt@....edu.cn>
-S: Maintained
-W: http://mprc.pku.edu.cn/~guanxuetao/linux
-T: git git://github.com/gxt/linux.git
-F: arch/unicore32/
-
UNIFDEF
M: Tony Finch <dot@...at.at>
S: Maintained
diff --git a/arch/unicore32/.gitignore b/arch/unicore32/.gitignore
deleted file mode 100644
index e82f3fb57ba0..000000000000
--- a/arch/unicore32/.gitignore
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Generated include files
-#
-include/generated
-#
-# Generated ld script file
-#
-kernel/vmlinux.lds
-#
-# Generated images in boot
-#
-boot/Image
-boot/zImage
-boot/uImage
-#
-# Generated files in boot/compressed
-#
-boot/compressed/piggy.S
-boot/compressed/piggy.gzip
-boot/compressed/vmlinux
-boot/compressed/vmlinux.lds
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
deleted file mode 100644
index 11ba1839d198..000000000000
--- a/arch/unicore32/Kconfig
+++ /dev/null
@@ -1,200 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config UNICORE32
- def_bool y
- select ARCH_32BIT_OFF_T
- select ARCH_HAS_DEVMEM_IS_ALLOWED
- select ARCH_HAS_KEEPINITRD
- select ARCH_MIGHT_HAVE_PC_PARPORT
- select ARCH_MIGHT_HAVE_PC_SERIO
- select HAVE_KERNEL_GZIP
- select HAVE_KERNEL_BZIP2
- select GENERIC_ATOMIC64
- select HAVE_KERNEL_LZO
- select HAVE_KERNEL_LZMA
- select HAVE_PCI
- select VIRT_TO_BUS
- select ARCH_HAVE_CUSTOM_GPIO_H
- select GENERIC_FIND_FIRST_BIT
- select GENERIC_IRQ_PROBE
- select GENERIC_IRQ_SHOW
- select ARCH_WANT_FRAME_POINTERS
- select GENERIC_IOMAP
- select MODULES_USE_ELF_REL
- select NEED_DMA_MAP_STATE
- select MMU_GATHER_NO_RANGE if MMU
- help
- UniCore-32 is 32-bit Instruction Set Architecture,
- including a series of low-power-consumption RISC chip
- designs licensed by PKUnity Ltd.
- Please see web page at <http://www.pkunity.com/>.
-
-config GENERIC_CSUM
- def_bool y
-
-config NO_IOPORT_MAP
- bool
-
-config STACKTRACE_SUPPORT
- def_bool y
-
-config LOCKDEP_SUPPORT
- def_bool y
-
-config ARCH_HAS_ILOG2_U32
- bool
-
-config ARCH_HAS_ILOG2_U64
- bool
-
-config GENERIC_HWEIGHT
- def_bool y
-
-config GENERIC_CALIBRATE_DELAY
- def_bool y
-
-config ARCH_MAY_HAVE_PC_FDC
- bool
-
-config ZONE_DMA
- def_bool y
-
-menu "System Type"
-
-config MMU
- def_bool y
-
-config ARCH_FPGA
- bool
-
-config ARCH_PUV3
- def_bool y
- select CPU_UCV2
- select GENERIC_CLOCKEVENTS
- select HAVE_LEGACY_CLK
- select GPIOLIB
-
-# CONFIGs for ARCH_PUV3
-
-if ARCH_PUV3
-
-choice
- prompt "Board Selection"
- default PUV3_DB0913
-
-config PUV3_FPGA_DLX200
- select ARCH_FPGA
- bool "FPGA board"
-
-config PUV3_DB0913
- bool "DEBUG board (0913)"
-
-config PUV3_NB0916
- bool "NetBook board (0916)"
- select PWM
- select PWM_PUV3
-
-config PUV3_SMW0919
- bool "Security Mini-Workstation board (0919)"
-
-endchoice
-
-config PUV3_PM
- def_bool y if !ARCH_FPGA
-
-endif
-
-source "arch/unicore32/mm/Kconfig"
-
-comment "Floating point support"
-
-config UNICORE_FPU_F64
- def_bool y if !ARCH_FPGA
-
-endmenu
-
-menu "Kernel Features"
-
-source "kernel/Kconfig.hz"
-
-config LEDS
- def_bool y
- depends on GPIOLIB
-
-config ALIGNMENT_TRAP
- def_bool y
- help
- Unicore processors can not fetch/store information which is not
- naturally aligned on the bus, i.e., a 4 byte fetch must start at an
- address divisible by 4. On 32-bit Unicore processors, these non-aligned
- fetch/store instructions will be emulated in software if you say
- here, which has a severe performance impact. This is necessary for
- correct operation of some network protocols. With an IP-only
- configuration it is safe to say N, otherwise say Y.
-
-endmenu
-
-menu "Boot options"
-
-config CMDLINE
- string "Default kernel command string"
- default ""
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- depends on CMDLINE != ""
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
- If unsure, say N.
-
-endmenu
-
-menu "Power management options"
-
-source "kernel/power/Kconfig"
-
-source "drivers/cpufreq/Kconfig"
-
-config ARCH_SUSPEND_POSSIBLE
- def_bool y if !ARCH_FPGA
-
-config ARCH_HIBERNATION_POSSIBLE
- def_bool y if !ARCH_FPGA
-
-endmenu
-
-if ARCH_PUV3
-
-config PUV3_GPIO
- bool
- depends on !ARCH_FPGA
- select GPIO_SYSFS
- default y
-
-if PUV3_NB0916
-
-menu "PKUnity NetBook-0916 Features"
-
-config I2C_BATTERY_BQ27200
- tristate "I2C Battery BQ27200 Support"
- select I2C_PUV3
- select POWER_SUPPLY
- select BATTERY_BQ27XXX
-
-config I2C_EEPROM_AT24
- tristate "I2C EEPROMs AT24 support"
- select I2C_PUV3
- select EEPROM_AT24
-
-config LCD_BACKLIGHT
- tristate "LCD Backlight support"
- select BACKLIGHT_PWM
-
-endmenu
-
-endif
-
-endif
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
deleted file mode 100644
index ca0ff97657ef..000000000000
--- a/arch/unicore32/Kconfig.debug
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config EARLY_PRINTK
- def_bool DEBUG_OCD
- help
- Write kernel log output directly into the ocd or to a serial port.
-
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. For normal operation
- it is not recommended because it looks ugly and doesn't cooperate
- with klogd/syslogd or the X server. You should normally N here,
- unless you want to debug such a crash.
-
-# These options are only for real kernel hackers who want to get their hands dirty.
-config DEBUG_LL
- bool "Kernel low-level debugging functions"
- depends on DEBUG_KERNEL
- help
- Say Y here to include definitions of printascii, printch, printhex
- in the kernel. This is helpful if you are debugging code that
- executes before the console is initialized.
-
-config DEBUG_OCD
- bool "Kernel low-level debugging via On-Chip-Debugger"
- depends on DEBUG_LL
- default y
- help
- Say Y here if you want the debug print routines to direct their
- output to the UniCore On-Chip-Debugger channel using CP #1.
diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
deleted file mode 100644
index 390819947c37..000000000000
--- a/arch/unicore32/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# arch/unicore32/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2002~2010 by Guan Xue-tao
-#
-ifneq ($(SUBARCH),$(ARCH))
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, unicore32-linux-)
- endif
-endif
-
-LDFLAGS_vmlinux := -p --no-undefined -X
-
-OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -S
-
-# Never generate .eh_frame
-KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
-
-# Never use hard float in kernel
-KBUILD_CFLAGS += -msoft-float
-
-ifeq ($(CONFIG_FRAME_POINTER),y)
-KBUILD_CFLAGS += -mno-sched-prolog
-endif
-
-CHECKFLAGS += -D__unicore32__
-
-head-y := arch/unicore32/kernel/head.o
-
-core-y += arch/unicore32/kernel/
-core-y += arch/unicore32/mm/
-
-libs-y += arch/unicore32/lib/
-
-boot := arch/unicore32/boot
-
-# Default target when executing plain make
-KBUILD_IMAGE := $(boot)/zImage
-
-all: zImage
-
-zImage Image uImage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-archclean:
- $(Q)$(MAKE) $(clean)=$(boot)
-
-define archhelp
- echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
- echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
- echo ' uImage - U-Boot wrapped zImage'
-endef
diff --git a/arch/unicore32/boot/Makefile b/arch/unicore32/boot/Makefile
deleted file mode 100644
index 828855007b29..000000000000
--- a/arch/unicore32/boot/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# arch/unicore32/boot/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2001~2010 GUAN Xue-tao
-#
-
-targets := Image zImage uImage
-
-$(obj)/Image: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-UIMAGE_ARCH = unicore
-UIMAGE_LOADADDR = 0x0
-
-$(obj)/uImage: $(obj)/zImage FORCE
- $(call if_changed,uimage)
- @echo ' Image $@ is ready'
-
-PHONY += initrd
-initrd:
- @test "$(INITRD)" != "" || \
- (echo You must specify INITRD; exit -1)
-
-subdir- := compressed
diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile
deleted file mode 100644
index 150fafc32fb0..000000000000
--- a/arch/unicore32/boot/compressed/Makefile
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# linux/arch/unicore32/boot/compressed/Makefile
-#
-# create a compressed vmlinuz image from the original vmlinux
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2001~2010 GUAN Xue-tao
-#
-
-ccflags-y := -fpic -fno-builtin
-asflags-y := -Wa,-march=all
-
-OBJS := misc.o
-
-# font.c and font.o
-CFLAGS_font.o := -Dstatic=
-$(obj)/font.c: $(srctree)/lib/fonts/font_8x8.c
- $(call cmd,shipped)
-
-# piggy.S and piggy.o
-suffix_$(CONFIG_KERNEL_GZIP) := gzip
-suffix_$(CONFIG_KERNEL_BZIP2) := bz2
-suffix_$(CONFIG_KERNEL_LZO) := lzo
-suffix_$(CONFIG_KERNEL_LZMA) := lzma
-
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
- $(call if_changed,$(suffix_y))
-
-SEDFLAGS_piggy = s/DECOMP_SUFFIX/$(suffix_y)/
-$(obj)/piggy.S: $(obj)/piggy.S.in
- @sed "$(SEDFLAGS_piggy)" < $< > $@
-
-$(obj)/piggy.o: $(obj)/piggy.$(suffix_y) $(obj)/piggy.S FORCE
-
-targets := vmlinux vmlinux.lds font.o font.c head.o misc.o \
- piggy.$(suffix_y) piggy.o piggy.S \
-
-# Make sure files are removed during clean
-extra-y += piggy.gzip piggy.bz2 piggy.lzo piggy.lzma
-
-# ?
-LDFLAGS_vmlinux += -p
-# Report unresolved symbol references
-LDFLAGS_vmlinux += --no-undefined
-# Delete all temporary local symbols
-LDFLAGS_vmlinux += -X
-# Next argument is a linker script
-LDFLAGS_vmlinux += -T
-
-# For uidivmod
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head.o $(obj)/piggy.o \
- $(obj)/misc.o FORCE
- $(call if_changed,ld)
-
-# We now have a PIC decompressor implementation. Decompressors running
-# from RAM should not define ZTEXTADDR. Decompressors running directly
-# from ROM or Flash must define ZTEXTADDR (preferably via the config)
-ZTEXTADDR := 0x03000000
-ZBSSADDR := ALIGN(4)
-
-CPPFLAGS_vmlinux.lds = -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
diff --git a/arch/unicore32/boot/compressed/head.S b/arch/unicore32/boot/compressed/head.S
deleted file mode 100644
index 5f72662cd294..000000000000
--- a/arch/unicore32/boot/compressed/head.S
+++ /dev/null
@@ -1,201 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/boot/compressed/head.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <mach/memory.h>
-
-#define csub cmpsub
-#define cand cmpand
-#define nop8 nop; nop; nop; nop; nop; nop; nop; nop
-
- .section ".start", #alloc, #execinstr
- .text
-start:
- .type start,#function
-
- /* Initialize ASR, PRIV mode and INTR off */
- mov r0, #0xD3
- mov.a asr, r0
-
- adr r0, LC0
- ldm (r1, r2, r3, r5, r6, r7, r8), [r0]+
- ldw sp, [r0+], #28
- sub.a r0, r0, r1 @ calculate the delta offset
-
- /*
- * if delta is zero, we are running at the address
- * we were linked at.
- */
- beq not_relocated
-
- /*
- * We're running at a different address. We need to fix
- * up various pointers:
- * r5 - zImage base address (_start)
- * r7 - GOT start
- * r8 - GOT end
- */
- add r5, r5, r0
- add r7, r7, r0
- add r8, r8, r0
-
- /*
- * we need to fix up pointers into the BSS region.
- * r2 - BSS start
- * r3 - BSS end
- * sp - stack pointer
- */
- add r2, r2, r0
- add r3, r3, r0
- add sp, sp, r0
-
- /*
- * Relocate all entries in the GOT table.
- * This fixes up the C references.
- * r7 - GOT start
- * r8 - GOT end
- */
-1001: ldw r1, [r7+], #0
- add r1, r1, r0
- stw.w r1, [r7]+, #4
- csub.a r7, r8
- bub 1001b
-
-not_relocated:
- /*
- * Clear BSS region.
- * r2 - BSS start
- * r3 - BSS end
- */
- mov r0, #0
-1002: stw.w r0, [r2]+, #4
- csub.a r2, r3
- bub 1002b
-
- /*
- * Turn on the cache.
- */
- mov r0, #0
- movc p0.c5, r0, #28 @ cache invalidate all
- nop8
- movc p0.c6, r0, #6 @ tlb invalidate all
- nop8
-
- mov r0, #0x1c @ en icache and wb dcache
- movc p0.c1, r0, #0
- nop8
-
- /*
- * Set up some pointers, for starting decompressing.
- */
-
- mov r1, sp @ malloc space above stack
- add r2, sp, #0x10000 @ 64k max
-
- /*
- * Check to see if we will overwrite ourselves.
- * r4 = final kernel address
- * r5 = start of this image
- * r6 = size of decompressed image
- * r2 = end of malloc space (and therefore this image)
- * We basically want:
- * r4 >= r2 -> OK
- * r4 + image length <= r5 -> OK
- */
- ldw r4, =KERNEL_IMAGE_START
- csub.a r4, r2
- bea wont_overwrite
- add r0, r4, r6
- csub.a r0, r5
- beb wont_overwrite
-
- /*
- * If overwrite, just print error message
- */
- b __error_overwrite
-
- /*
- * We're not in danger of overwriting ourselves.
- * Do this the simple way.
- */
-wont_overwrite:
- /*
- * decompress_kernel:
- * r0: output_start
- * r1: free_mem_ptr_p
- * r2: free_mem_ptr_end_p
- */
- mov r0, r4
- b.l decompress_kernel @ C functions
-
- /*
- * Clean and flush the cache to maintain consistency.
- */
- mov r0, #0
- movc p0.c5, r0, #14 @ flush dcache
- nop8
- movc p0.c5, r0, #20 @ icache invalidate all
- nop8
-
- /*
- * Turn off the Cache and MMU.
- */
- mov r0, #0 @ disable i/d cache and MMU
- movc p0.c1, r0, #0
- nop8
-
- mov r0, #0 @ must be zero
- ldw r4, =KERNEL_IMAGE_START
- mov pc, r4 @ call kernel
-
-
- .align 2
- .type LC0, #object
-LC0: .word LC0 @ r1
- .word __bss_start @ r2
- .word _end @ r3
- .word _start @ r5
- .word _image_size @ r6
- .word _got_start @ r7
- .word _got_end @ r8
- .word decompress_stack_end @ sp
- .size LC0, . - LC0
-
-print_string:
-#ifdef CONFIG_DEBUG_OCD
-2001: ldb.w r1, [r0]+, #1
- csub.a r1, #0
- bne 2002f
- mov pc, lr
-2002:
- movc r2, p1.c0, #0
- cand.a r2, #2
- bne 2002b
- movc p1.c1, r1, #1
- csub.a r1, #'\n'
- cmoveq r1, #'\r'
- beq 2002b
- b 2001b
-#else
- mov pc, lr
-#endif
-
-__error_overwrite:
- adr r0, str_error
- b.l print_string
-2001: nop8
- b 2001b
-str_error: .asciz "\nError: Kernel address OVERWRITE\n"
- .align
-
- .ltorg
-
- .align 4
- .section ".stack", "aw", %nobits
-decompress_stack: .space 4096
-decompress_stack_end:
diff --git a/arch/unicore32/boot/compressed/misc.c b/arch/unicore32/boot/compressed/misc.c
deleted file mode 100644
index 450d3355de20..000000000000
--- a/arch/unicore32/boot/compressed/misc.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/boot/compressed/misc.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <asm/unaligned.h>
-#include <mach/uncompress.h>
-
-/*
- * gzip delarations
- */
-unsigned char *output_data;
-unsigned long output_ptr;
-
-unsigned int free_mem_ptr;
-unsigned int free_mem_end_ptr;
-
-#define STATIC static
-#define STATIC_RW_DATA /* non-static please */
-
-/*
- * arch-dependent implementations
- */
-#ifndef ARCH_HAVE_DECOMP_ERROR
-#define arch_decomp_error(x)
-#endif
-
-#ifndef ARCH_HAVE_DECOMP_SETUP
-#define arch_decomp_setup()
-#endif
-
-#ifndef ARCH_HAVE_DECOMP_PUTS
-#define arch_decomp_puts(p)
-#endif
-
-void *memcpy(void *dest, const void *src, size_t n)
-{
- int i = 0;
- unsigned char *d = (unsigned char *)dest, *s = (unsigned char *)src;
-
- for (i = n >> 3; i > 0; i--) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (n & 1 << 2) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (n & 1 << 1) {
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (n & 1)
- *d++ = *s++;
-
- return dest;
-}
-
-void error(char *x)
-{
- arch_decomp_puts("\n\n");
- arch_decomp_puts(x);
- arch_decomp_puts("\n\n -- System halted");
-
- arch_decomp_error(x);
-
- for (;;)
- ; /* Halt */
-}
-
-/* Heap size should be adjusted for different decompress method */
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_BZIP2
-#include "../../../../lib/decompress_bunzip2.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-unsigned long decompress_kernel(unsigned long output_start,
- unsigned long free_mem_ptr_p,
- unsigned long free_mem_ptr_end_p)
-{
- unsigned char *tmp;
-
- output_data = (unsigned char *)output_start;
- free_mem_ptr = free_mem_ptr_p;
- free_mem_end_ptr = free_mem_ptr_end_p;
-
- arch_decomp_setup();
-
- tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
- output_ptr = get_unaligned_le32(tmp);
-
- arch_decomp_puts("Uncompressing Linux...");
- __decompress(input_data, input_data_end - input_data, NULL, NULL,
- output_data, 0, NULL, error);
- arch_decomp_puts(" done, booting the kernel.\n");
- return output_ptr;
-}
diff --git a/arch/unicore32/boot/compressed/piggy.S.in b/arch/unicore32/boot/compressed/piggy.S.in
deleted file mode 100644
index b79704d58026..000000000000
--- a/arch/unicore32/boot/compressed/piggy.S.in
+++ /dev/null
@@ -1,6 +0,0 @@
- .section .piggydata,#alloc
- .globl input_data
-input_data:
- .incbin "arch/unicore32/boot/compressed/piggy.DECOMP_SUFFIX"
- .globl input_data_end
-input_data_end:
diff --git a/arch/unicore32/boot/compressed/vmlinux.lds.S b/arch/unicore32/boot/compressed/vmlinux.lds.S
deleted file mode 100644
index edda4ddfa357..000000000000
--- a/arch/unicore32/boot/compressed/vmlinux.lds.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore/boot/compressed/vmlinux.lds.in
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-OUTPUT_ARCH(unicore32)
-ENTRY(_start)
-SECTIONS
-{
- /DISCARD/ : {
- /*
- * Discard any r/w data - this produces a link error if we have any,
- * which is required for PIC decompression. Local data generates
- * GOTOFF relocations, which prevents it being relocated independently
- * of the text/got segments.
- */
- *(.data)
- }
-
- . = TEXT_START;
- _text = .;
-
- .text : {
- _start = .;
- *(.start)
- *(.text)
- *(.text.*)
- *(.fixup)
- *(.gnu.warning)
- *(.rodata)
- *(.rodata.*)
- *(.piggydata)
- . = ALIGN(4);
- }
-
- _etext = .;
-
- /* Assume size of decompressed image is 4x the compressed image */
- _image_size = (_etext - _text) * 4;
-
- _got_start = .;
- .got : { *(.got) }
- _got_end = .;
- .got.plt : { *(.got.plt) }
- _edata = .;
-
- . = BSS_START;
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
-
- .stack : { *(.stack) }
- .comment 0 : { *(.comment) }
-}
-
diff --git a/arch/unicore32/configs/defconfig b/arch/unicore32/configs/defconfig
deleted file mode 100644
index 360cc9abcdb0..000000000000
--- a/arch/unicore32/configs/defconfig
+++ /dev/null
@@ -1,214 +0,0 @@
-### General setup
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-unicore32"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HOTPLUG=y
-# Initial RAM filesystem and RAM disk (initramfs/initrd) support
-#CONFIG_BLK_DEV_INITRD=y
-#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config"
-
-### Enable loadable module support
-CONFIG_MODULES=n
-CONFIG_MODULE_UNLOAD=y
-
-### System Type
-CONFIG_ARCH_PUV3=y
-# Board Selection
-CONFIG_PUV3_NB0916=y
-# Processor Features
-CONFIG_CPU_DCACHE_LINE_DISABLE=y
-CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n
-
-### Bus support
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY=n
-
-### Boot options
-# for debug, adding: earlyprintk=ocd,keep initcall_debug
-# others support: test_suspend=mem root=/dev/sda
-# hibernate support: resume=/dev/sda3
-CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel"
-# TODO: mem=512M video=unifb:1024x600-16@75
-# for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024
-# ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off
-CONFIG_CMDLINE_FORCE=y
-
-### Power management options
-CONFIG_PM=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="/dev/sda3"
-CONFIG_CPU_FREQ=n
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-
-### Networking support
-CONFIG_NET=y
-# Networking options
-CONFIG_PACKET=m
-CONFIG_UNIX=m
-# TCP/IP networking
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IPV6=n
-# Wireless
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-
-### PKUnity SoC Features
-CONFIG_USB_WLAN_HED_AQ3=n
-CONFIG_USB_CMMB_INNOFIDEI=n
-CONFIG_I2C_BATTERY_BQ27200=n
-CONFIG_I2C_EEPROM_AT24=n
-CONFIG_LCD_BACKLIGHT=n
-
-CONFIG_PUV3_UMAL=y
-CONFIG_PUV3_MUSB=n
-CONFIG_PUV3_AC97=n
-CONFIG_PUV3_NAND=n
-CONFIG_PUV3_MMC=n
-CONFIG_PUV3_UART=n
-
-### Device Drivers
-# Memory Technology Device (MTD) support
-CONFIG_MTD=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-# RAM/ROM/Flash chip drivers
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_AMDSTD=m
-# Mapping drivers for chip access
-CONFIG_MTD_PHYSMAP=m
-
-# Block devices
-CONFIG_BLK_DEV_LOOP=m
-
-# SCSI device support
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-CONFIG_ATA=y
-CONFIG_SATA_VIA=y
-
-# Network device support
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NETDEV_1000=y
-# Wireless LAN
-CONFIG_WLAN_80211=n
-CONFIG_RT2X00=n
-CONFIG_RT73USB=n
-
-# Input device support
-CONFIG_INPUT_EVDEV=m
-# Keyboards
-CONFIG_KEYBOARD_GPIO=m
-
-# I2C support
-CONFIG_I2C=y
-CONFIG_I2C_PUV3=y
-
-# Hardware Monitoring support
-#CONFIG_SENSORS_LM75=m
-# Generic Thermal sysfs driver
-#CONFIG_THERMAL=y
-#CONFIG_THERMAL_HWMON=y
-
-# Multimedia support
-CONFIG_MEDIA_SUPPORT=n
-CONFIG_VIDEO_DEV=n
-CONFIG_USB_VIDEO_CLASS=n
-
-# Graphics support
-CONFIG_FB=y
-CONFIG_FB_PUV3_UNIGFX=y
-# Console display driver support
-CONFIG_VGA_CONSOLE=n
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# Bootup logo
-CONFIG_LOGO=n
-
-# Sound card support
-CONFIG_SOUND=m
-# Advanced Linux Sound Architecture
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-
-# USB support
-CONFIG_USB_ARCH_HAS_HCD=n
-CONFIG_USB=n
-CONFIG_USB_PRINTER=n
-CONFIG_USB_STORAGE=n
-# Inventra Highspeed Dual Role Controller
-CONFIG_USB_MUSB_HDRC=n
-
-# LED Support
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-# LED Triggers
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-# Real Time Clock
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PUV3=y
-
-### File systems
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_FUSE_FS=m
-# CD-ROM/DVD Filesystems
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-# DOS/FAT/NT Filesystems
-CONFIG_VFAT_FS=m
-# Pseudo filesystems
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# Miscellaneous filesystems
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_JFFS2_FS=m
-CONFIG_UBIFS_FS=m
-# Network File Systems
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# Partition Types
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MSDOS_PARTITION=y
-# Native language support
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-
-### Kernel hacking
-CONFIG_FRAME_WARN=8096
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_LOCKING=n
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_LL=y
-
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
deleted file mode 100644
index 55026e8240d8..000000000000
--- a/arch/unicore32/include/asm/Kbuild
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generic-y += extable.h
-generic-y += kvm_para.h
-generic-y += mcs_spinlock.h
-generic-y += parport.h
-generic-y += syscalls.h
-generic-y += user.h
diff --git a/arch/unicore32/include/asm/assembler.h b/arch/unicore32/include/asm/assembler.h
deleted file mode 100644
index 3de843d92850..000000000000
--- a/arch/unicore32/include/asm/assembler.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/assembler.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Do not include any C declarations in this file - it is included by
- * assembler source.
- */
-#ifndef __ASSEMBLY__
-#error "Only include this from assembly code"
-#endif
-
-#include <asm/ptrace.h>
-
-/*
- * Little Endian independent macros for shifting bytes within registers.
- */
-#define pull >>
-#define push <<
-#define get_byte_0 << #0
-#define get_byte_1 >> #8
-#define get_byte_2 >> #16
-#define get_byte_3 >> #24
-#define put_byte_0 << #0
-#define put_byte_1 << #8
-#define put_byte_2 << #16
-#define put_byte_3 << #24
-
-#define cadd cmpadd
-#define cand cmpand
-#define csub cmpsub
-#define cxor cmpxor
-
-/*
- * Enable and disable interrupts
- */
- .macro disable_irq, temp
- mov \temp, asr
- andn \temp, \temp, #0xFF
- or \temp, \temp, #PSR_I_BIT | PRIV_MODE
- mov.a asr, \temp
- .endm
-
- .macro enable_irq, temp
- mov \temp, asr
- andn \temp, \temp, #0xFF
- or \temp, \temp, #PRIV_MODE
- mov.a asr, \temp
- .endm
-
-#define USER(x...) \
-9999: x; \
- .pushsection __ex_table, "a"; \
- .align 3; \
- .long 9999b, 9001f; \
- .popsection
-
- .macro notcond, cond, nexti = .+8
- .ifc \cond, eq
- bne \nexti
- .else; .ifc \cond, ne
- beq \nexti
- .else; .ifc \cond, ea
- bub \nexti
- .else; .ifc \cond, ub
- bea \nexti
- .else; .ifc \cond, fs
- bns \nexti
- .else; .ifc \cond, ns
- bfs \nexti
- .else; .ifc \cond, fv
- bnv \nexti
- .else; .ifc \cond, nv
- bfv \nexti
- .else; .ifc \cond, ua
- beb \nexti
- .else; .ifc \cond, eb
- bua \nexti
- .else; .ifc \cond, eg
- bsl \nexti
- .else; .ifc \cond, sl
- beg \nexti
- .else; .ifc \cond, sg
- bel \nexti
- .else; .ifc \cond, el
- bsg \nexti
- .else; .ifnc \cond, al
- .error "Unknown cond in notcond macro argument"
- .endif; .endif; .endif; .endif; .endif; .endif; .endif
- .endif; .endif; .endif; .endif; .endif; .endif; .endif
- .endif
- .endm
-
- .macro usracc, instr, reg, ptr, inc, cond, rept, abort
- .rept \rept
- notcond \cond, .+8
-9999 :
- .if \inc == 1
- \instr\()b.u \reg, [\ptr], #\inc
- .elseif \inc == 4
- \instr\()w.u \reg, [\ptr], #\inc
- .else
- .error "Unsupported inc macro argument"
- .endif
-
- .pushsection __ex_table, "a"
- .align 3
- .long 9999b, \abort
- .popsection
- .endr
- .endm
-
- .macro strusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
- usracc st, \reg, \ptr, \inc, \cond, \rept, \abort
- .endm
-
- .macro ldrusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
- usracc ld, \reg, \ptr, \inc, \cond, \rept, \abort
- .endm
-
- .macro nop8
- .rept 8
- nop
- .endr
- .endm
diff --git a/arch/unicore32/include/asm/barrier.h b/arch/unicore32/include/asm/barrier.h
deleted file mode 100644
index efb81de87507..000000000000
--- a/arch/unicore32/include/asm/barrier.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Memory barrier implementations for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_BARRIER_H__
-#define __UNICORE_BARRIER_H__
-
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("" : : : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-
-#include <asm-generic/barrier.h>
-
-#endif /* __UNICORE_BARRIER_H__ */
diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h
deleted file mode 100644
index deeb2163f35e..000000000000
--- a/arch/unicore32/include/asm/bitops.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/bitops.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_BITOPS_H__
-#define __UNICORE_BITOPS_H__
-
-#define _ASM_GENERIC_BITOPS_FLS_H_
-#define _ASM_GENERIC_BITOPS___FLS_H_
-#define _ASM_GENERIC_BITOPS_FFS_H_
-#define _ASM_GENERIC_BITOPS___FFS_H_
-/*
- * On UNICORE, those functions can be implemented around
- * the cntlz instruction for much better code efficiency.
- */
-
-static inline int fls(unsigned int x)
-{
- int ret;
-
- asm("cntlz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
- ret = 32 - ret;
-
- return ret;
-}
-
-#define __fls(x) (fls(x) - 1)
-#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
-#define __ffs(x) (ffs(x) - 1)
-
-#include <asm-generic/bitops.h>
-
-/* following definitions: to avoid using codes in lib/find_*.c */
-#define find_next_bit find_next_bit
-#define find_next_zero_bit find_next_zero_bit
-#define find_first_bit find_first_bit
-#define find_first_zero_bit find_first_zero_bit
-
-#include <asm-generic/bitops/find.h>
-
-#endif /* __UNICORE_BITOPS_H__ */
diff --git a/arch/unicore32/include/asm/bug.h b/arch/unicore32/include/asm/bug.h
deleted file mode 100644
index 99acea84a865..000000000000
--- a/arch/unicore32/include/asm/bug.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Bug handling for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_BUG_H__
-#define __UNICORE_BUG_H__
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-struct siginfo;
-
-extern void die(const char *msg, struct pt_regs *regs, int err);
-extern void uc32_notify_die(const char *str, struct pt_regs *regs,
- int sig, int code, void __user *addr,
- unsigned long err, unsigned long trap);
-
-#endif /* __UNICORE_BUG_H__ */
diff --git a/arch/unicore32/include/asm/cache.h b/arch/unicore32/include/asm/cache.h
deleted file mode 100644
index 44ecd1f300fe..000000000000
--- a/arch/unicore32/include/asm/cache.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cache.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CACHE_H__
-#define __UNICORE_CACHE_H__
-
-#define L1_CACHE_SHIFT (5)
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-/*
- * Memory returned by kmalloc() may be used for DMA, so we must make
- * sure that all such allocations are cache aligned. Otherwise,
- * unrelated code may cause parts of the buffer to be read into the
- * cache before the transfer is done, causing old data to be seen by
- * the CPU.
- */
-#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
-
-#endif
diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h
deleted file mode 100644
index ff0be92ebc32..000000000000
--- a/arch/unicore32/include/asm/cacheflush.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cacheflush.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CACHEFLUSH_H__
-#define __UNICORE_CACHEFLUSH_H__
-
-#include <linux/mm.h>
-
-#include <asm/shmparam.h>
-
-#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
-
-/*
- * This flag is used to indicate that the page pointed to by a pte is clean
- * and does not require cleaning before returning it to the user.
- */
-#define PG_dcache_clean PG_arch_1
-
-/*
- * MM Cache Management
- * ===================
- *
- * The arch/unicore32/mm/cache.S files implement these methods.
- *
- * Start addresses are inclusive and end addresses are exclusive;
- * start addresses should be rounded down, end addresses up.
- *
- * See Documentation/core-api/cachetlb.rst for more information.
- * Please note that the implementation of these, and the required
- * effects are cache-type (VIVT/VIPT/PIPT) specific.
- *
- * flush_icache_all()
- *
- * Unconditionally clean and invalidate the entire icache.
- * Currently only needed for cache-v6.S and cache-v7.S, see
- * __flush_icache_all for the generic implementation.
- *
- * flush_kern_all()
- *
- * Unconditionally clean and invalidate the entire cache.
- *
- * flush_user_all()
- *
- * Clean and invalidate all user space cache entries
- * before a change of page tables.
- *
- * flush_user_range(start, end, flags)
- *
- * Clean and invalidate a range of cache entries in the
- * specified address space before a change of page tables.
- * - start - user start address (inclusive, page aligned)
- * - end - user end address (exclusive, page aligned)
- * - flags - vma->vm_flags field
- *
- * coherent_kern_range(start, end)
- *
- * Ensure coherency between the Icache and the Dcache in the
- * region described by start, end. If you have non-snooping
- * Harvard caches, you need to implement this function.
- * - start - virtual start address
- * - end - virtual end address
- *
- * coherent_user_range(start, end)
- *
- * Ensure coherency between the Icache and the Dcache in the
- * region described by start, end. If you have non-snooping
- * Harvard caches, you need to implement this function.
- * - start - virtual start address
- * - end - virtual end address
- *
- * flush_kern_dcache_area(kaddr, size)
- *
- * Ensure that the data held in page is written back.
- * - kaddr - page address
- * - size - region size
- *
- * DMA Cache Coherency
- * ===================
- *
- * dma_flush_range(start, end)
- *
- * Clean and invalidate the specified virtual address range.
- * - start - virtual start address
- * - end - virtual end address
- */
-
-extern void __cpuc_flush_icache_all(void);
-extern void __cpuc_flush_kern_all(void);
-extern void __cpuc_flush_user_all(void);
-extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
-extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
-extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
-extern void __cpuc_flush_dcache_area(void *, size_t);
-extern void __cpuc_flush_kern_dcache_area(void *addr, size_t size);
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space. Really, we want to allow our "user
- * space" model to handle this.
- */
-extern void copy_to_user_page(struct vm_area_struct *, struct page *,
- unsigned long, void *, const void *, unsigned long);
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- do { \
- memcpy(dst, src, len); \
- } while (0)
-
-/*
- * Convert calls to our calling convention.
- */
-/* Invalidate I-cache */
-static inline void __flush_icache_all(void)
-{
- asm("movc p0.c5, %0, #20;\n"
- "nop; nop; nop; nop; nop; nop; nop; nop\n"
- :
- : "r" (0));
-}
-
-#define flush_cache_all() __cpuc_flush_kern_all()
-
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma,
- unsigned long user_addr, unsigned long pfn);
-
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-
-/*
- * Perform necessary cache operations to ensure that data previously
- * stored within this range of addresses can be executed by the CPU.
- */
-#define flush_icache_range(s, e) __cpuc_coherent_kern_range(s, e)
-
-/*
- * Perform necessary cache operations to ensure that the TLB will
- * see data written in the specified area.
- */
-#define clean_dcache_area(start, size) cpu_dcache_clean_area(start, size)
-
-/*
- * flush_dcache_page is used when the kernel has written to the page
- * cache page at virtual address page->virtual.
- *
- * If this page isn't mapped (ie, page_mapping == NULL), or it might
- * have userspace mappings, then we _must_ always clean + invalidate
- * the dcache entries associated with the kernel mapping.
- *
- * Otherwise we can defer the operation, and clean the cache when we are
- * about to change to user space. This is the same method as used on SPARC64.
- * See update_mmu_cache for the user space part.
- */
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-extern void flush_dcache_page(struct page *);
-
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-/*
- * We don't appear to need to do anything here. In fact, if we did, we'd
- * duplicate cache flushing elsewhere performed by flush_dcache_page().
- */
-#define flush_icache_page(vma, page) do { } while (0)
-
-/*
- * flush_cache_vmap() is used when creating mappings (eg, via vmap,
- * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT
- * caches, since the direct-mappings of these pages may contain cached
- * data, we need to do a full cache flush to ensure that writebacks
- * don't corrupt data placed into these pages via the new mappings.
- */
-static inline void flush_cache_vmap(unsigned long start, unsigned long end)
-{
-}
-
-static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
-{
-}
-
-#endif
diff --git a/arch/unicore32/include/asm/checksum.h b/arch/unicore32/include/asm/checksum.h
deleted file mode 100644
index e774ca268c15..000000000000
--- a/arch/unicore32/include/asm/checksum.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/checksum.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * IP checksum routines
- */
-#ifndef __UNICORE_CHECKSUM_H__
-#define __UNICORE_CHECKSUM_H__
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
- __u8 proto, __wsum sum)
-{
- __asm__(
- "add.a %0, %1, %2\n"
- "addc.a %0, %0, %3\n"
- "addc.a %0, %0, %4 << #8\n"
- "addc.a %0, %0, %5\n"
- "addc %0, %0, #0\n"
- : "=&r"(sum)
- : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
- : "cc");
- return sum;
-}
-#define csum_tcpudp_nofold csum_tcpudp_nofold
-
-#include <asm-generic/checksum.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/cmpxchg.h b/arch/unicore32/include/asm/cmpxchg.h
deleted file mode 100644
index 87f960a2e4f0..000000000000
--- a/arch/unicore32/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Atomics xchg/cmpxchg for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_CMPXCHG_H__
-#define __UNICORE_CMPXCHG_H__
-
-/*
- * Generate a link failure on undefined symbol if the pointer points to a value
- * of unsupported size.
- */
-extern void __xchg_bad_pointer(void);
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
- int size)
-{
- unsigned long ret;
-
- switch (size) {
- case 1:
- asm volatile("swapb %0, %1, [%2]"
- : "=&r" (ret)
- : "r" (x), "r" (ptr)
- : "memory", "cc");
- break;
- case 4:
- asm volatile("swapw %0, %1, [%2]"
- : "=&r" (ret)
- : "r" (x), "r" (ptr)
- : "memory", "cc");
- break;
- default:
- __xchg_bad_pointer();
- }
-
- return ret;
-}
-
-#define xchg(ptr, x) \
- ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), \
- (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) \
- __cmpxchg64_local_generic((ptr), (o), (n))
-
-#include <asm-generic/cmpxchg.h>
-
-#endif /* __UNICORE_CMPXCHG_H__ */
diff --git a/arch/unicore32/include/asm/cpu-single.h b/arch/unicore32/include/asm/cpu-single.h
deleted file mode 100644
index 1b419d697fd1..000000000000
--- a/arch/unicore32/include/asm/cpu-single.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cpu-single.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CPU_SINGLE_H__
-#define __UNICORE_CPU_SINGLE_H__
-
-#include <asm/page.h>
-#include <asm/memory.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#define cpu_switch_mm(pgd, mm) cpu_do_switch_mm(virt_to_phys(pgd), mm)
-
-#define cpu_get_pgd() \
- ({ \
- unsigned long pg; \
- __asm__("movc %0, p0.c2, #0" \
- : "=r" (pg) : : "cc"); \
- pg &= ~0x0fff; \
- (pgd_t *)phys_to_virt(pg); \
- })
-
-struct mm_struct;
-
-/* declare all the functions as extern */
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte(pte_t *ptep, pte_t pte);
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-#endif /* __UNICORE_CPU_SINGLE_H__ */
diff --git a/arch/unicore32/include/asm/cputype.h b/arch/unicore32/include/asm/cputype.h
deleted file mode 100644
index 08a47e3bdbcc..000000000000
--- a/arch/unicore32/include/asm/cputype.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cputype.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CPUTYPE_H__
-#define __UNICORE_CPUTYPE_H__
-
-#include <linux/stringify.h>
-
-#define CPUID_CPUID 0
-#define CPUID_CACHETYPE 1
-
-#define read_cpuid(reg) \
- ({ \
- unsigned int __val; \
- asm("movc %0, p0.c0, #" __stringify(reg) \
- : "=r" (__val) \
- : \
- : "cc"); \
- __val; \
- })
-
-#define uc32_cpuid read_cpuid(CPUID_CPUID)
-#define uc32_cachetype read_cpuid(CPUID_CACHETYPE)
-
-#endif
diff --git a/arch/unicore32/include/asm/delay.h b/arch/unicore32/include/asm/delay.h
deleted file mode 100644
index 934193edfa66..000000000000
--- a/arch/unicore32/include/asm/delay.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/delay.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-#ifndef __UNICORE_DELAY_H__
-#define __UNICORE_DELAY_H__
-
-#include <asm/param.h> /* HZ */
-
-extern void __delay(int loops);
-
-/*
- * This function intentionally does not exist; if you see references to
- * it, it means that you're calling udelay() with an out of range value.
- *
- * With currently imposed limits, this means that we support a max delay
- * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
- */
-extern void __bad_udelay(void);
-
-/*
- * division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-extern void __udelay(unsigned long usecs);
-extern void __const_udelay(unsigned long);
-
-#define MAX_UDELAY_MS 2
-
-#define udelay(n) \
- (__builtin_constant_p(n) ? \
- ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
- __const_udelay((n) * ((2199023U*HZ)>>11))) : \
- __udelay(n))
-
-#endif /* __UNICORE_DELAY_H__ */
-
diff --git a/arch/unicore32/include/asm/dma.h b/arch/unicore32/include/asm/dma.h
deleted file mode 100644
index 1326310b21e6..000000000000
--- a/arch/unicore32/include/asm/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/dma.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_DMA_H__
-#define __UNICORE_DMA_H__
-
-#include <asm/memory.h>
-#include <asm-generic/dma.h>
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#endif
-
-#endif /* __UNICORE_DMA_H__ */
diff --git a/arch/unicore32/include/asm/elf.h b/arch/unicore32/include/asm/elf.h
deleted file mode 100644
index a464ed5f05d4..000000000000
--- a/arch/unicore32/include/asm/elf.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/elf.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_ELF_H__
-#define __UNICORE_ELF_H__
-
-#include <asm/hwcap.h>
-
-/*
- * ELF register definitions..
- */
-#include <asm/ptrace.h>
-#include <linux/elf-em.h>
-
-typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
-
-#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct fp_state elf_fpregset_t;
-
-#define R_UNICORE_NONE 0
-#define R_UNICORE_PC24 1
-#define R_UNICORE_ABS32 2
-#define R_UNICORE_CALL 28
-#define R_UNICORE_JUMP24 29
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_UNICORE
-
-/*
- * This yields a string that ld.so will use to load implementation
- * specific libraries for optimization. This is more specific in
- * intent than poking at uname or /proc/cpuinfo.
- *
- */
-#define ELF_PLATFORM_SIZE 8
-#define ELF_PLATFORM (elf_platform)
-
-extern char elf_platform[];
-
-struct elf32_hdr;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-extern int elf_check_arch(const struct elf32_hdr *);
-#define elf_check_arch elf_check_arch
-
-struct task_struct;
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
-#define ELF_CORE_COPY_TASK_REGS dump_task_regs
-
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-/* When the program starts, a1 contains a pointer to a function to be
- registered with atexit, as per the SVR4 ABI. A value of 0 means we
- have no such handler. */
-#define ELF_PLAT_INIT(_r, load_addr) {(_r)->UCreg_00 = 0; }
-
-extern void elf_set_personality(const struct elf32_hdr *);
-#define SET_PERSONALITY(ex) elf_set_personality(&(ex))
-
-struct mm_struct;
-extern unsigned long arch_randomize_brk(struct mm_struct *mm);
-#define arch_randomize_brk arch_randomize_brk
-
-extern int vectors_user_mapping(void);
-#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-
-#endif
diff --git a/arch/unicore32/include/asm/fpstate.h b/arch/unicore32/include/asm/fpstate.h
deleted file mode 100644
index 5811293e7a7e..000000000000
--- a/arch/unicore32/include/asm/fpstate.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/fpstate.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_FPSTATE_H__
-#define __UNICORE_FPSTATE_H__
-
-#ifndef __ASSEMBLY__
-
-#define FP_REGS_NUMBER 33
-
-struct fp_state {
- unsigned int regs[FP_REGS_NUMBER];
-} __attribute__((aligned(8)));
-
-#endif
-
-#endif
diff --git a/arch/unicore32/include/asm/fpu-ucf64.h b/arch/unicore32/include/asm/fpu-ucf64.h
deleted file mode 100644
index 7a0c8a9e05d4..000000000000
--- a/arch/unicore32/include/asm/fpu-ucf64.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/fpu-ucf64.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-#define FPSCR s31
-
-/* FPSCR bits */
-#define FPSCR_DEFAULT_NAN (1<<25)
-
-#define FPSCR_CMPINSTR_BIT (1<<31)
-
-#define FPSCR_CON (1<<29)
-#define FPSCR_TRAP (1<<27)
-
-/* RND mode */
-#define FPSCR_ROUND_NEAREST (0<<0)
-#define FPSCR_ROUND_PLUSINF (2<<0)
-#define FPSCR_ROUND_MINUSINF (3<<0)
-#define FPSCR_ROUND_TOZERO (1<<0)
-#define FPSCR_RMODE_BIT (0)
-#define FPSCR_RMODE_MASK (7 << FPSCR_RMODE_BIT)
-
-/* trap enable */
-#define FPSCR_IOE (1<<16)
-#define FPSCR_OFE (1<<14)
-#define FPSCR_UFE (1<<13)
-#define FPSCR_IXE (1<<12)
-#define FPSCR_HIE (1<<11)
-#define FPSCR_NDE (1<<10) /* non denomal */
-
-/* flags */
-#define FPSCR_IDC (1<<24)
-#define FPSCR_HIC (1<<23)
-#define FPSCR_IXC (1<<22)
-#define FPSCR_OFC (1<<21)
-#define FPSCR_UFC (1<<20)
-#define FPSCR_IOC (1<<19)
-
-/* stick bits */
-#define FPSCR_IOS (1<<9)
-#define FPSCR_OFS (1<<7)
-#define FPSCR_UFS (1<<6)
-#define FPSCR_IXS (1<<5)
-#define FPSCR_HIS (1<<4)
-#define FPSCR_NDS (1<<3) /*non denomal */
diff --git a/arch/unicore32/include/asm/gpio.h b/arch/unicore32/include/asm/gpio.h
deleted file mode 100644
index dfad04ca0a65..000000000000
--- a/arch/unicore32/include/asm/gpio.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/gpio.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_GPIO_H__
-#define __UNICORE_GPIO_H__
-
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#define GPI_OTP_INT 0
-#define GPI_PCI_INTA 1
-#define GPI_PCI_INTB 2
-#define GPI_PCI_INTC 3
-#define GPI_PCI_INTD 4
-#define GPI_BAT_DET 5
-#define GPI_SD_CD 6
-#define GPI_SOFF_REQ 7
-#define GPI_SD_WP 8
-#define GPI_LCD_CASE_OFF 9
-#define GPO_WIFI_EN 10
-#define GPO_HDD_LED 11
-#define GPO_VGA_EN 12
-#define GPO_LCD_EN 13
-#define GPO_LED_DATA 14
-#define GPO_LED_CLK 15
-#define GPO_CAM_PWR_EN 16
-#define GPO_LCD_VCC_EN 17
-#define GPO_SOFT_OFF 18
-#define GPO_BT_EN 19
-#define GPO_FAN_ON 20
-#define GPO_SPKR 21
-#define GPO_SET_V1 23
-#define GPO_SET_V2 24
-#define GPO_CPU_HEALTH 25
-#define GPO_LAN_SEL 26
-
-#ifdef CONFIG_PUV3_NB0916
-#define GPI_BTN_TOUCH 14
-#define GPIO_IN 0x000043ff /* 1 for input */
-#define GPIO_OUT 0x0fffbc00 /* 1 for output */
-#endif /* CONFIG_PUV3_NB0916 */
-
-#ifdef CONFIG_PUV3_SMW0919
-#define GPIO_IN 0x000003ff /* 1 for input */
-#define GPIO_OUT 0x0ffffc00 /* 1 for output */
-#endif /* CONFIG_PUV3_SMW0919 */
-
-#ifdef CONFIG_PUV3_DB0913
-#define GPIO_IN 0x000001df /* 1 for input */
-#define GPIO_OUT 0x03fee800 /* 1 for output */
-#endif /* CONFIG_PUV3_DB0913 */
-
-#define GPIO_DIR (~((GPIO_IN) | 0xf0000000))
- /* 0 input, 1 output */
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
- return readl(GPIO_GPLR) & GPIO_GPIO(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
- if (value)
- writel(GPIO_GPIO(gpio), GPIO_GPSR);
- else
- writel(GPIO_GPIO(gpio), GPIO_GPCR);
- else
- __gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- if ((gpio < IRQ_GPIOHIGH) && (FIELD(1, 1, gpio) & readl(GPIO_GPIR)))
- return IRQ_GPIOLOW0 + gpio;
- else
- return IRQ_GPIO0 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIOHIGH)
- return irq - IRQ_GPIOLOW0;
- else
- return irq - IRQ_GPIO0;
-}
-
-#endif /* __UNICORE_GPIO_H__ */
diff --git a/arch/unicore32/include/asm/hwcap.h b/arch/unicore32/include/asm/hwcap.h
deleted file mode 100644
index 2e15ffbe8391..000000000000
--- a/arch/unicore32/include/asm/hwcap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/hwcap.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_HWCAP_H__
-#define __UNICORE_HWCAP_H__
-
-/*
- * HWCAP flags
- */
-#define HWCAP_MSP 1
-#define HWCAP_UNICORE16 2
-#define HWCAP_CMOV 4
-#define HWCAP_UNICORE_F64 8
-#define HWCAP_TLS 0x80
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-/*
- * This yields a mask that user programs can use to figure out what
- * instruction set this cpu supports.
- */
-#define ELF_HWCAP (HWCAP_CMOV | HWCAP_UNICORE_F64)
-#endif
-
-#endif
diff --git a/arch/unicore32/include/asm/hwdef-copro.h b/arch/unicore32/include/asm/hwdef-copro.h
deleted file mode 100644
index 2db8cf864e43..000000000000
--- a/arch/unicore32/include/asm/hwdef-copro.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Co-processor register definitions for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_HWDEF_COPRO_H__
-#define __UNICORE_HWDEF_COPRO_H__
-
-/*
- * Control Register bits (CP#0 CR1)
- */
-#define CR_M (1 << 0) /* MMU enable */
-#define CR_A (1 << 1) /* Alignment abort enable */
-#define CR_D (1 << 2) /* Dcache enable */
-#define CR_I (1 << 3) /* Icache enable */
-#define CR_B (1 << 4) /* Dcache write mechanism: write back */
-#define CR_T (1 << 5) /* Burst enable */
-#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */
-
-#ifndef __ASSEMBLY__
-
-#define vectors_high() (cr_alignment & CR_V)
-
-extern unsigned long cr_no_alignment; /* defined in entry.S */
-extern unsigned long cr_alignment; /* defined in entry.S */
-
-static inline unsigned int get_cr(void)
-{
- unsigned int val;
- asm("movc %0, p0.c1, #0" : "=r" (val) : : "cc");
- return val;
-}
-
-static inline void set_cr(unsigned int val)
-{
- asm volatile("movc p0.c1, %0, #0" : : "r" (val) : "cc");
- isb();
-}
-
-extern void adjust_cr(unsigned long mask, unsigned long set);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __UNICORE_HWDEF_COPRO_H__ */
diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h
deleted file mode 100644
index bd4e7c332f85..000000000000
--- a/arch/unicore32/include/asm/io.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/io.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_IO_H__
-#define __UNICORE_IO_H__
-
-#ifdef __KERNEL__
-
-#include <asm/byteorder.h>
-#include <asm/memory.h>
-
-#define PCI_IOBASE PKUNITY_PCILIO_BASE
-#include <asm-generic/io.h>
-
-/*
- * __uc32_ioremap takes CPU physical address.
- */
-extern void __iomem *__uc32_ioremap(unsigned long, size_t);
-extern void __uc32_iounmap(volatile void __iomem *addr);
-
-/*
- * ioremap and friends.
- *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/driver-api/io-mapping.rst.
- *
- */
-#define ioremap(cookie, size) __uc32_ioremap(cookie, size)
-#define iounmap(cookie) __uc32_iounmap(cookie)
-
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
-#define HAVE_ARCH_PIO_SIZE
-#define PIO_OFFSET (unsigned int)(PCI_IOBASE)
-#define PIO_MASK (unsigned int)(IO_SPACE_LIMIT)
-#define PIO_RESERVED (PIO_OFFSET + PIO_MASK + 1)
-
-#ifdef CONFIG_STRICT_DEVMEM
-
-#include <linux/ioport.h>
-#include <linux/mm.h>
-
-/*
- * devmem_is_allowed() checks to see if /dev/mem access to a certain
- * address is valid. The argument is a physical page number.
- * We mimic x86 here by disallowing access to system RAM as well as
- * device-exclusive MMIO regions. This effectively disable read()/write()
- * on /dev/mem.
- */
-static inline int devmem_is_allowed(unsigned long pfn)
-{
- if (iomem_is_exclusive(pfn << PAGE_SHIFT))
- return 0;
- if (!page_is_ram(pfn))
- return 1;
- return 0;
-}
-
-#endif /* CONFIG_STRICT_DEVMEM */
-
-#endif /* __KERNEL__ */
-#endif /* __UNICORE_IO_H__ */
diff --git a/arch/unicore32/include/asm/irq.h b/arch/unicore32/include/asm/irq.h
deleted file mode 100644
index 3f7f07c0338c..000000000000
--- a/arch/unicore32/include/asm/irq.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/irq.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_IRQ_H__
-#define __UNICORE_IRQ_H__
-
-#include <asm-generic/irq.h>
-
-#define IRQ_GPIOLOW0 0x00
-#define IRQ_GPIOLOW1 0x01
-#define IRQ_GPIOLOW2 0x02
-#define IRQ_GPIOLOW3 0x03
-#define IRQ_GPIOLOW4 0x04
-#define IRQ_GPIOLOW5 0x05
-#define IRQ_GPIOLOW6 0x06
-#define IRQ_GPIOLOW7 0x07
-#define IRQ_GPIOHIGH 0x08
-#define IRQ_USB 0x09
-#define IRQ_SDC 0x0a
-#define IRQ_AC97 0x0b
-#define IRQ_SATA 0x0c
-#define IRQ_MME 0x0d
-#define IRQ_PCI_BRIDGE 0x0e
-#define IRQ_DDR 0x0f
-#define IRQ_SPI 0x10
-#define IRQ_UNIGFX 0x11
-#define IRQ_I2C 0x11
-#define IRQ_UART1 0x12
-#define IRQ_UART0 0x13
-#define IRQ_UMAL 0x14
-#define IRQ_NAND 0x15
-#define IRQ_PS2_KBD 0x16
-#define IRQ_PS2_AUX 0x17
-#define IRQ_DMA 0x18
-#define IRQ_DMAERR 0x19
-#define IRQ_TIMER0 0x1a
-#define IRQ_TIMER1 0x1b
-#define IRQ_TIMER2 0x1c
-#define IRQ_TIMER3 0x1d
-#define IRQ_RTC 0x1e
-#define IRQ_RTCAlarm 0x1f
-
-#define IRQ_GPIO0 0x20
-#define IRQ_GPIO1 0x21
-#define IRQ_GPIO2 0x22
-#define IRQ_GPIO3 0x23
-#define IRQ_GPIO4 0x24
-#define IRQ_GPIO5 0x25
-#define IRQ_GPIO6 0x26
-#define IRQ_GPIO7 0x27
-#define IRQ_GPIO8 0x28
-#define IRQ_GPIO9 0x29
-#define IRQ_GPIO10 0x2a
-#define IRQ_GPIO11 0x2b
-#define IRQ_GPIO12 0x2c
-#define IRQ_GPIO13 0x2d
-#define IRQ_GPIO14 0x2e
-#define IRQ_GPIO15 0x2f
-#define IRQ_GPIO16 0x30
-#define IRQ_GPIO17 0x31
-#define IRQ_GPIO18 0x32
-#define IRQ_GPIO19 0x33
-#define IRQ_GPIO20 0x34
-#define IRQ_GPIO21 0x35
-#define IRQ_GPIO22 0x36
-#define IRQ_GPIO23 0x37
-#define IRQ_GPIO24 0x38
-#define IRQ_GPIO25 0x39
-#define IRQ_GPIO26 0x3a
-#define IRQ_GPIO27 0x3b
-
-#ifdef CONFIG_ARCH_FPGA
-#define IRQ_PCIINTA IRQ_GPIOLOW2
-#define IRQ_PCIINTB IRQ_GPIOLOW1
-#define IRQ_PCIINTC IRQ_GPIOLOW0
-#define IRQ_PCIINTD IRQ_GPIOLOW6
-#endif
-
-#if defined(CONFIG_PUV3_DB0913) || defined(CONFIG_PUV3_NB0916) \
- || defined(CONFIG_PUV3_SMW0919)
-#define IRQ_PCIINTA IRQ_GPIOLOW1
-#define IRQ_PCIINTB IRQ_GPIOLOW2
-#define IRQ_PCIINTC IRQ_GPIOLOW3
-#define IRQ_PCIINTD IRQ_GPIOLOW4
-#endif
-
-#define IRQ_SD_CD IRQ_GPIO6 /* falling or rising trigger */
-
-#ifndef __ASSEMBLY__
-struct pt_regs;
-
-extern void asm_do_IRQ(unsigned int, struct pt_regs *);
-
-#endif
-
-#endif
-
diff --git a/arch/unicore32/include/asm/irqflags.h b/arch/unicore32/include/asm/irqflags.h
deleted file mode 100644
index f64c82e3eae6..000000000000
--- a/arch/unicore32/include/asm/irqflags.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/irqflags.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_IRQFLAGS_H__
-#define __UNICORE_IRQFLAGS_H__
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-
-#define ARCH_IRQ_DISABLED (PRIV_MODE | PSR_I_BIT)
-#define ARCH_IRQ_ENABLED (PRIV_MODE)
-
-/*
- * Save the current interrupt enable state.
- */
-static inline unsigned long arch_local_save_flags(void)
-{
- unsigned long temp;
-
- asm volatile("mov %0, asr" : "=r" (temp) : : "memory", "cc");
-
- return temp & PSR_c;
-}
-
-/*
- * restore saved IRQ state
- */
-static inline void arch_local_irq_restore(unsigned long flags)
-{
- unsigned long temp;
-
- asm volatile(
- "mov %0, asr\n"
- "mov.a asr, %1\n"
- "mov.f asr, %0"
- : "=&r" (temp)
- : "r" (flags)
- : "memory", "cc");
-}
-
-#include <asm-generic/irqflags.h>
-
-#endif
-#endif
diff --git a/arch/unicore32/include/asm/linkage.h b/arch/unicore32/include/asm/linkage.h
deleted file mode 100644
index 8e341ba7bc4a..000000000000
--- a/arch/unicore32/include/asm/linkage.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/linkage.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_LINKAGE_H__
-#define __UNICORE_LINKAGE_H__
-
-#define __ALIGN .align 0
-#define __ALIGN_STR ".align 0"
-
-#define ENDPROC(name) \
- .type name, %function; \
- END(name)
-
-#endif
diff --git a/arch/unicore32/include/asm/memblock.h b/arch/unicore32/include/asm/memblock.h
deleted file mode 100644
index eb56a6ddce83..000000000000
--- a/arch/unicore32/include/asm/memblock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/memblock.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_MEMBLOCK_H__
-#define __UNICORE_MEMBLOCK_H__
-
-/*
- * Memory map description
- */
-# define NR_BANKS 8
-
-struct membank {
- unsigned long start;
- unsigned long size;
- unsigned int highmem;
-};
-
-struct meminfo {
- int nr_banks;
- struct membank bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#define for_each_bank(iter, mi) \
- for (iter = 0; iter < (mi)->nr_banks; iter++)
-
-#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
-#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
-#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT)
-#define bank_phys_start(bank) ((bank)->start)
-#define bank_phys_end(bank) ((bank)->start + (bank)->size)
-#define bank_phys_size(bank) ((bank)->size)
-
-extern void uc32_memblock_init(struct meminfo *);
-
-#endif
diff --git a/arch/unicore32/include/asm/memory.h b/arch/unicore32/include/asm/memory.h
deleted file mode 100644
index 66285178dd9b..000000000000
--- a/arch/unicore32/include/asm/memory.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/memory.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Note: this file should not be included by non-asm/.h files
- */
-#ifndef __UNICORE_MEMORY_H__
-#define __UNICORE_MEMORY_H__
-
-#include <linux/compiler.h>
-#include <linux/const.h>
-#include <linux/sizes.h>
-#include <mach/memory.h>
-
-/*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
- * TASK_SIZE - the maximum size of a user space task.
- * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
- */
-#define PAGE_OFFSET UL(0xC0000000)
-#define TASK_SIZE (PAGE_OFFSET - UL(0x41000000))
-#define TASK_UNMAPPED_BASE (PAGE_OFFSET / 3)
-
-/*
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 32MB of the kernel text.
- */
-#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024)
-#if TASK_SIZE > MODULES_VADDR
-#error Top of user space clashes with start of module space
-#endif
-
-#define MODULES_END (PAGE_OFFSET)
-
-/*
- * Allow 16MB-aligned ioremap pages
- */
-#define IOREMAP_MAX_ORDER 24
-
-/*
- * Physical vs virtual RAM address space conversion. These are
- * private definitions which should NOT be used outside memory.h
- * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-
-/*
- * Convert a page to/from a physical address
- */
-#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
-#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
-
-#ifndef __ASSEMBLY__
-
-#ifndef arch_adjust_zones
-#define arch_adjust_zones(max_zone_pfn) do { } while (0)
-#endif
-
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view. We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
-
-/*
- * Drivers should NOT use these either.
- */
-#define __pa(x) __virt_to_phys((unsigned long)(x))
-#define __va(x) ((void *)__phys_to_virt((unsigned long)(x)))
-#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-
-/*
- * Conversion between a struct page and a physical address.
- *
- * page_to_pfn(page) convert a struct page * to a PFN number
- * pfn_to_page(pfn) convert a _valid_ PFN number to struct page *
- *
- * virt_to_page(k) convert a _valid_ virtual address to struct page *
- * virt_addr_valid(k) indicates whether a virtual address is valid
- */
-#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
-
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && \
- (unsigned long)(kaddr) < (unsigned long)high_memory)
-
-#endif
-
-#include <asm-generic/memory_model.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/mmu.h b/arch/unicore32/include/asm/mmu.h
deleted file mode 100644
index 8ad4e7eae17b..000000000000
--- a/arch/unicore32/include/asm/mmu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/mmu.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_MMU_H__
-#define __UNICORE_MMU_H__
-
-typedef unsigned long mm_context_t;
-
-#endif
diff --git a/arch/unicore32/include/asm/mmu_context.h b/arch/unicore32/include/asm/mmu_context.h
deleted file mode 100644
index 388c0c811c68..000000000000
--- a/arch/unicore32/include/asm/mmu_context.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/mmu_context.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_MMU_CONTEXT_H__
-#define __UNICORE_MMU_CONTEXT_H__
-
-#include <linux/compiler.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/vmacache.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cpu-single.h>
-
-#define init_new_context(tsk, mm) 0
-
-#define destroy_context(mm) do { } while (0)
-
-/*
- * This is called when "tsk" is about to enter lazy TLB mode.
- *
- * mm: describes the currently active mm context
- * tsk: task which is entering lazy tlb
- * cpu: cpu number which is entering lazy tlb
- *
- * tsk->mm will be NULL
- */
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * This is the actual mm switch as far as the scheduler
- * is concerned. No registers are touched. We avoid
- * calling the CPU specific function when the mm hasn't
- * actually changed.
- */
-static inline void
-switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
-{
- unsigned int cpu = smp_processor_id();
-
- if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next)
- cpu_switch_mm(next->pgd, next);
-}
-
-#define deactivate_mm(tsk, mm) do { } while (0)
-#define activate_mm(prev, next) switch_mm(prev, next, NULL)
-
-/*
- * We are inserting a "fake" vma for the user-accessible vector page so
- * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
- * But we also want to remove it before the generic code gets to see it
- * during process exit or the unmapping of it would cause total havoc.
- * (the macro is used as remove_vma() is static to mm/mmap.c)
- */
-#define arch_exit_mmap(mm) \
-do { \
- struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
- if (high_vma) { \
- BUG_ON(high_vma->vm_next); /* it should be last */ \
- if (high_vma->vm_prev) \
- high_vma->vm_prev->vm_next = NULL; \
- else \
- mm->mmap = NULL; \
- rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
- vmacache_invalidate(mm); \
- mm->map_count--; \
- remove_vma(high_vma); \
- } \
-} while (0)
-
-static inline int arch_dup_mmap(struct mm_struct *oldmm,
- struct mm_struct *mm)
-{
- return 0;
-}
-
-static inline void arch_unmap(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
-}
-
-static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
- bool write, bool execute, bool foreign)
-{
- /* by default, allow everything */
- return true;
-}
-#endif
diff --git a/arch/unicore32/include/asm/page.h b/arch/unicore32/include/asm/page.h
deleted file mode 100644
index 96d6bdf180bd..000000000000
--- a/arch/unicore32/include/asm/page.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/page.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PAGE_H__
-#define __UNICORE_PAGE_H__
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-struct page;
-struct vm_area_struct;
-
-#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
-extern void copy_page(void *to, const void *from);
-
-#define clear_user_page(page, vaddr, pg) clear_page(page)
-#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x) ((x).pte)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) })
-#define __pgd(x) ((pgd_t) { (x) })
-#define __pgprot(x) ((pgprot_t) { (x) })
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef unsigned long pte_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x) (x)
-#define pgd_val(x) (x)
-#define pgprot_val(x) (x)
-
-#define __pte(x) (x)
-#define __pgd(x) (x)
-#define __pgprot(x) (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-typedef struct page *pgtable_t;
-
-extern int pfn_valid(unsigned long);
-
-#include <asm/memory.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm-generic/getorder.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h
deleted file mode 100644
index 3efa8ee1afce..000000000000
--- a/arch/unicore32/include/asm/pci.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pci.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PCI_H__
-#define __UNICORE_PCI_H__
-
-#ifdef __KERNEL__
-#include <asm-generic/pci.h>
-#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
-
-#define HAVE_PCI_MMAP
-#define ARCH_GENERIC_PCI_MMAP_RESOURCE
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/arch/unicore32/include/asm/pgalloc.h b/arch/unicore32/include/asm/pgalloc.h
deleted file mode 100644
index ba1c9a79993b..000000000000
--- a/arch/unicore32/include/asm/pgalloc.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pgalloc.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PGALLOC_H__
-#define __UNICORE_PGALLOC_H__
-
-#include <asm/pgtable-hwdef.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL
-#define __HAVE_ARCH_PTE_ALLOC_ONE
-#include <asm-generic/pgalloc.h>
-
-#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_PRESENT)
-#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_PRESENT)
-
-extern pgd_t *get_pgd_slow(struct mm_struct *mm);
-extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
-
-#define pgd_alloc(mm) get_pgd_slow(mm)
-#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd)
-
-/*
- * Allocate one PTE table.
- */
-static inline pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm)
-{
- pte_t *pte = __pte_alloc_one_kernel(mm);
-
- if (pte)
- clean_dcache_area(pte, PTRS_PER_PTE * sizeof(pte_t));
-
- return pte;
-}
-
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm)
-{
- struct page *pte;
-
- pte = __pte_alloc_one(mm, GFP_PGTABLE_USER);
- if (!pte)
- return NULL;
- if (!PageHighMem(pte))
- clean_pte_table(page_address(pte));
- return pte;
-}
-
-static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
-{
- set_pmd(pmdp, __pmd(pmdval));
- flush_pmd_entry(pmdp);
-}
-
-/*
- * Populate the pmdp entry with a pointer to the pte. This pmd is part
- * of the mm address space.
- */
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
-{
- unsigned long pte_ptr = (unsigned long)ptep;
-
- /*
- * The pmd must be loaded with the physical
- * address of the PTE table
- */
- __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
-}
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
-{
- __pmd_populate(pmdp,
- page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#endif
diff --git a/arch/unicore32/include/asm/pgtable-hwdef.h b/arch/unicore32/include/asm/pgtable-hwdef.h
deleted file mode 100644
index f28b58c61db9..000000000000
--- a/arch/unicore32/include/asm/pgtable-hwdef.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pgtable-hwdef.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PGTABLE_HWDEF_H__
-#define __UNICORE_PGTABLE_HWDEF_H__
-
-/*
- * Hardware page table definitions.
- *
- * + Level 1 descriptor (PMD)
- * - common
- */
-#define PMD_TYPE_MASK (3 << 0)
-#define PMD_TYPE_TABLE (0 << 0)
-/*#define PMD_TYPE_LARGE (1 << 0) */
-#define PMD_TYPE_INVALID (2 << 0)
-#define PMD_TYPE_SECT (3 << 0)
-
-#define PMD_PRESENT (1 << 2)
-#define PMD_YOUNG (1 << 3)
-
-/*#define PMD_SECT_DIRTY (1 << 4) */
-#define PMD_SECT_CACHEABLE (1 << 5)
-#define PMD_SECT_EXEC (1 << 6)
-#define PMD_SECT_WRITE (1 << 7)
-#define PMD_SECT_READ (1 << 8)
-
-/*
- * + Level 2 descriptor (PTE)
- * - common
- */
-#define PTE_TYPE_MASK (3 << 0)
-#define PTE_TYPE_SMALL (0 << 0)
-#define PTE_TYPE_MIDDLE (1 << 0)
-#define PTE_TYPE_LARGE (2 << 0)
-#define PTE_TYPE_INVALID (3 << 0)
-
-#define PTE_PRESENT (1 << 2)
-#define PTE_YOUNG (1 << 3)
-#define PTE_DIRTY (1 << 4)
-#define PTE_CACHEABLE (1 << 5)
-#define PTE_EXEC (1 << 6)
-#define PTE_WRITE (1 << 7)
-#define PTE_READ (1 << 8)
-
-#endif
diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h
deleted file mode 100644
index 97f564c8ecba..000000000000
--- a/arch/unicore32/include/asm/pgtable.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pgtable.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PGTABLE_H__
-#define __UNICORE_PGTABLE_H__
-
-#include <asm-generic/pgtable-nopmd.h>
-#include <asm/cpu-single.h>
-
-#include <asm/memory.h>
-#include <asm/pgtable-hwdef.h>
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
- */
-#ifndef VMALLOC_START
-#define VMALLOC_OFFSET SZ_8M
-#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) \
- & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END (0xff000000UL)
-#endif
-
-#define PTRS_PER_PTE 1024
-#define PTRS_PER_PGD 1024
-
-/*
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PGDIR_SHIFT 22
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
-
-#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd))
-#endif /* !__ASSEMBLY__ */
-
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at. This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS PAGE_SIZE
-
-#define FIRST_USER_PGD_NR 1
-#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
-
-/*
- * section address mask and size definitions.
- */
-#define SECTION_SHIFT 22
-#define SECTION_SIZE (1UL << SECTION_SHIFT)
-#define SECTION_MASK (~(SECTION_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * The pgprot_* and protection_map entries will be fixed up in runtime
- * to include the cachable bits based on memory policy, as well as any
- * architecture dependent bits.
- */
-#define _PTE_DEFAULT (PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE)
-
-extern pgprot_t pgprot_user;
-extern pgprot_t pgprot_kernel;
-
-#define PAGE_NONE pgprot_user
-#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user | PTE_READ \
- | PTE_WRITE))
-#define PAGE_SHARED_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \
- | PTE_WRITE \
- | PTE_EXEC))
-#define PAGE_COPY __pgprot(pgprot_val(pgprot_user | PTE_READ)
-#define PAGE_COPY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \
- | PTE_EXEC))
-#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user | PTE_READ))
-#define PAGE_READONLY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \
- | PTE_EXEC))
-#define PAGE_KERNEL pgprot_kernel
-#define PAGE_KERNEL_EXEC __pgprot(pgprot_val(pgprot_kernel | PTE_EXEC))
-
-#define __PAGE_NONE __pgprot(_PTE_DEFAULT)
-#define __PAGE_SHARED __pgprot(_PTE_DEFAULT | PTE_READ \
- | PTE_WRITE)
-#define __PAGE_SHARED_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \
- | PTE_WRITE \
- | PTE_EXEC)
-#define __PAGE_COPY __pgprot(_PTE_DEFAULT | PTE_READ)
-#define __PAGE_COPY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \
- | PTE_EXEC)
-#define __PAGE_READONLY __pgprot(_PTE_DEFAULT | PTE_READ)
-#define __PAGE_READONLY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \
- | PTE_EXEC)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The table below defines the page protection levels that we insert into our
- * Linux page table version. These get translated into the best that the
- * architecture can perform. Note that on UniCore hardware:
- * 1) We cannot do execute protection
- * 2) If we could do execute protection, then read is implied
- * 3) write implies read permissions
- */
-#define __P000 __PAGE_NONE
-#define __P001 __PAGE_READONLY
-#define __P010 __PAGE_COPY
-#define __P011 __PAGE_COPY
-#define __P100 __PAGE_READONLY_EXEC
-#define __P101 __PAGE_READONLY_EXEC
-#define __P110 __PAGE_COPY_EXEC
-#define __P111 __PAGE_COPY_EXEC
-
-#define __S000 __PAGE_NONE
-#define __S001 __PAGE_READONLY
-#define __S010 __PAGE_SHARED
-#define __S011 __PAGE_SHARED
-#define __S100 __PAGE_READONLY_EXEC
-#define __S101 __PAGE_READONLY_EXEC
-#define __S110 __PAGE_SHARED_EXEC
-#define __S111 __PAGE_SHARED_EXEC
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr) (empty_zero_page)
-
-#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot) (__pte(((pfn) << PAGE_SHIFT) \
- | pgprot_val(prot)))
-
-#define pte_none(pte) (!pte_val(pte))
-#define pte_clear(mm, addr, ptep) set_pte(ptep, __pte(0))
-#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
-
-#define set_pte(ptep, pte) cpu_set_pte(ptep, pte)
-
-#define set_pte_at(mm, addr, ptep, pteval) \
- do { \
- set_pte(ptep, pteval); \
- } while (0)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_present(pte) (pte_val(pte) & PTE_PRESENT)
-#define pte_write(pte) (pte_val(pte) & PTE_WRITE)
-#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY)
-#define pte_young(pte) (pte_val(pte) & PTE_YOUNG)
-#define pte_exec(pte) (pte_val(pte) & PTE_EXEC)
-
-#define PTE_BIT_FUNC(fn, op) \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(wrprotect, &= ~PTE_WRITE);
-PTE_BIT_FUNC(mkwrite, |= PTE_WRITE);
-PTE_BIT_FUNC(mkclean, &= ~PTE_DIRTY);
-PTE_BIT_FUNC(mkdirty, |= PTE_DIRTY);
-PTE_BIT_FUNC(mkold, &= ~PTE_YOUNG);
-PTE_BIT_FUNC(mkyoung, |= PTE_YOUNG);
-
-/*
- * Mark the prot value as uncacheable.
- */
-#define pgprot_noncached(prot) \
- __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
-#define pgprot_writecombine(prot) \
- __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
-
-#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_present(pmd) (pmd_val(pmd) & PMD_PRESENT)
-#define pmd_bad(pmd) (((pmd_val(pmd) & \
- (PMD_PRESENT | PMD_TYPE_MASK)) \
- != (PMD_PRESENT | PMD_TYPE_TABLE)))
-
-#define set_pmd(pmdpd, pmdval) \
- do { \
- *(pmdpd) = pmdval; \
- } while (0)
-
-#define pmd_clear(pmdp) \
- do { \
- set_pmd(pmdp, __pmd(0));\
- clean_pmd_entry(pmdp); \
- } while (0)
-
-#define pmd_page_vaddr(pmd) ((pte_t *)__va(pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- const unsigned long mask = PTE_EXEC | PTE_WRITE | PTE_READ;
- pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
- return pte;
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/*
- * Encode and decode a swap entry. Swap entries are stored in the Linux
- * page tables as follows:
- *
- * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * <--------------- offset --------------> <--- type --> 0 0 0 0 0
- *
- * This gives us up to 127 swap files and 32GB per swap file. Note that
- * the offset field is always non-zero.
- */
-#define __SWP_TYPE_SHIFT 5
-#define __SWP_TYPE_BITS 7
-#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
-#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
-
-#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) \
- & __SWP_TYPE_MASK)
-#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
-#define __swp_entry(type, offset) ((swp_entry_t) { \
- ((type) << __SWP_TYPE_SHIFT) | \
- ((offset) << __SWP_OFFSET_SHIFT) })
-
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
-
-/*
- * It is an error for the kernel to have more swap files than we can
- * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
- * is increased beyond what we presently support.
- */
-#define MAX_SWAPFILES_CHECK() \
- BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr) (1)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __UNICORE_PGTABLE_H__ */
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
deleted file mode 100644
index 6f01620da3d1..000000000000
--- a/arch/unicore32/include/asm/processor.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/processor.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_PROCESSOR_H__
-#define __UNICORE_PROCESSOR_H__
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX TASK_SIZE
-#endif
-
-struct debug_entry {
- u32 address;
- u32 insn;
-};
-
-struct debug_info {
- int nsaved;
- struct debug_entry bp[2];
-};
-
-struct thread_struct {
- /* fault info */
- unsigned long address;
- unsigned long trap_no;
- unsigned long error_code;
- /* debugging */
- struct debug_info debug;
-};
-
-#define INIT_THREAD { }
-
-#define start_thread(regs, pc, sp) \
-({ \
- unsigned long *stack = (unsigned long *)sp; \
- memset(regs->uregs, 0, sizeof(regs->uregs)); \
- regs->UCreg_asr = USER_MODE; \
- regs->UCreg_pc = pc & ~1; /* pc */ \
- regs->UCreg_sp = sp; /* sp */ \
- regs->UCreg_02 = stack[2]; /* r2 (envp) */ \
- regs->UCreg_01 = stack[1]; /* r1 (argv) */ \
- regs->UCreg_00 = stack[0]; /* r0 (argc) */ \
-})
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define cpu_relax() barrier()
-
-#define task_pt_regs(p) \
- ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
-
-#define KSTK_EIP(tsk) (task_pt_regs(tsk)->UCreg_pc)
-#define KSTK_ESP(tsk) (task_pt_regs(tsk)->UCreg_sp)
-
-#endif
-
-#endif /* __UNICORE_PROCESSOR_H__ */
diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h
deleted file mode 100644
index bb4cbc42c321..000000000000
--- a/arch/unicore32/include/asm/ptrace.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/ptrace.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PTRACE_H__
-#define __UNICORE_PTRACE_H__
-
-#include <uapi/asm/ptrace.h>
-
-#ifndef __ASSEMBLY__
-
-#define user_mode(regs) \
- (processor_mode(regs) == USER_MODE)
-
-#define processor_mode(regs) \
- ((regs)->UCreg_asr & MODE_MASK)
-
-#define interrupts_enabled(regs) \
- (!((regs)->UCreg_asr & PSR_I_BIT))
-
-#define fast_interrupts_enabled(regs) \
- (!((regs)->UCreg_asr & PSR_R_BIT))
-
-/* Are the current registers suitable for user mode?
- * (used to maintain security in signal handlers)
- */
-static inline int valid_user_regs(struct pt_regs *regs)
-{
- unsigned long mode = regs->UCreg_asr & MODE_MASK;
-
- /*
- * Always clear the R (REAL) bits
- */
- regs->UCreg_asr &= ~(PSR_R_BIT);
-
- if ((regs->UCreg_asr & PSR_I_BIT) == 0) {
- if (mode == USER_MODE)
- return 1;
- }
-
- /*
- * Force ASR to something logical...
- */
- regs->UCreg_asr &= PSR_f | USER_MODE;
-
- return 0;
-}
-
-#define instruction_pointer(regs) ((regs)->UCreg_pc)
-#define user_stack_pointer(regs) ((regs)->UCreg_sp)
-#define profile_pc(regs) instruction_pointer(regs)
-
-#endif /* __ASSEMBLY__ */
-#endif
diff --git a/arch/unicore32/include/asm/stacktrace.h b/arch/unicore32/include/asm/stacktrace.h
deleted file mode 100644
index 3e59f9d2faed..000000000000
--- a/arch/unicore32/include/asm/stacktrace.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/stacktrace.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_STACKTRACE_H__
-#define __UNICORE_STACKTRACE_H__
-
-struct stackframe {
- unsigned long fp;
- unsigned long sp;
- unsigned long lr;
- unsigned long pc;
-};
-
-#ifdef CONFIG_FRAME_POINTER
-extern int unwind_frame(struct stackframe *frame);
-#else
-#define unwind_frame(f) (-EINVAL)
-#endif
-extern void walk_stackframe(struct stackframe *frame,
- int (*fn)(struct stackframe *, void *), void *data);
-
-#endif /* __UNICORE_STACKTRACE_H__ */
diff --git a/arch/unicore32/include/asm/string.h b/arch/unicore32/include/asm/string.h
deleted file mode 100644
index 1649b0e4271b..000000000000
--- a/arch/unicore32/include/asm/string.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/string.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_STRING_H__
-#define __UNICORE_STRING_H__
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-
-#define __HAVE_ARCH_STRRCHR
-extern char *strrchr(const char *s, int c);
-
-#define __HAVE_ARCH_STRCHR
-extern char *strchr(const char *s, int c);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *, int, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *, int, __kernel_size_t);
-
-#endif
diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h
deleted file mode 100644
index 72bd89c44d10..000000000000
--- a/arch/unicore32/include/asm/suspend.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/suspend.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_SUSPEND_H__
-#define __UNICORE_SUSPEND_H__
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-
-struct swsusp_arch_regs {
- struct cpu_context_save cpu_context; /* cpu context */
-#ifdef CONFIG_UNICORE_FPU_F64
- struct fp_state fpstate __attribute__((aligned(8)));
-#endif
-};
-#endif
-
-#endif /* __UNICORE_SUSPEND_H__ */
-
diff --git a/arch/unicore32/include/asm/switch_to.h b/arch/unicore32/include/asm/switch_to.h
deleted file mode 100644
index 12e534b3bfa5..000000000000
--- a/arch/unicore32/include/asm/switch_to.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Task switching for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_SWITCH_TO_H__
-#define __UNICORE_SWITCH_TO_H__
-
-struct task_struct;
-struct thread_info;
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'. schedule() itself
- * contains the memory barrier to tell GCC not to cache `current'.
- */
-extern struct task_struct *__switch_to(struct task_struct *,
- struct thread_info *, struct thread_info *);
-
-#define switch_to(prev, next, last) \
- do { \
- last = __switch_to(prev, task_thread_info(prev), \
- task_thread_info(next)); \
- } while (0)
-
-#endif /* __UNICORE_SWITCH_TO_H__ */
diff --git a/arch/unicore32/include/asm/syscall.h b/arch/unicore32/include/asm/syscall.h
deleted file mode 100644
index 607961797fff..000000000000
--- a/arch/unicore32/include/asm/syscall.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_UNICORE_SYSCALL_H
-#define _ASM_UNICORE_SYSCALL_H
-
-#include <uapi/linux/audit.h>
-
-static inline int syscall_get_arch(struct task_struct *task)
-{
- return AUDIT_ARCH_UNICORE;
-}
-
-#endif /* _ASM_UNICORE_SYSCALL_H */
diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h
deleted file mode 100644
index d8a6d6b7a403..000000000000
--- a/arch/unicore32/include/asm/thread_info.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/thread_info.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_THREAD_INFO_H__
-#define __UNICORE_THREAD_INFO_H__
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/fpstate.h>
-
-#define THREAD_SIZE_ORDER 1
-#define THREAD_SIZE 8192
-#define THREAD_START_SP (THREAD_SIZE - 8)
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-
-#include <asm/types.h>
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-struct cpu_context_save {
- __u32 r4;
- __u32 r5;
- __u32 r6;
- __u32 r7;
- __u32 r8;
- __u32 r9;
- __u32 r10;
- __u32 r11;
- __u32 r12;
- __u32 r13;
- __u32 r14;
- __u32 r15;
- __u32 r16;
- __u32 r17;
- __u32 r18;
- __u32 r19;
- __u32 r20;
- __u32 r21;
- __u32 r22;
- __u32 r23;
- __u32 r24;
- __u32 r25;
- __u32 r26;
- __u32 fp;
- __u32 sp;
- __u32 pc;
-};
-
-/*
- * low level task data that entry.S needs immediate access to.
- * __switch_to() assumes cpu_context follows immediately after cpu_domain.
- */
-struct thread_info {
- unsigned long flags; /* low level flags */
- int preempt_count; /* 0 => preemptable */
- /* <0 => bug */
- mm_segment_t addr_limit; /* address limit */
- struct task_struct *task; /* main task structure */
- __u32 cpu; /* cpu */
- struct cpu_context_save cpu_context; /* cpu context */
- __u32 syscall; /* syscall number */
- __u8 used_cp[16]; /* thread used copro */
-#ifdef CONFIG_UNICORE_FPU_F64
- struct fp_state fpstate __attribute__((aligned(8)));
-#endif
-};
-
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .flags = 0, \
- .preempt_count = INIT_PREEMPT_COUNT, \
- .addr_limit = KERNEL_DS, \
-}
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
- register unsigned long sp asm ("sp");
- return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
-}
-
-#define thread_saved_pc(tsk) \
- ((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
-#define thread_saved_sp(tsk) \
- ((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
-#define thread_saved_fp(tsk) \
- ((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
-
-#endif
-
-/*
- * thread information flags:
- * TIF_SYSCALL_TRACE - syscall trace active
- * TIF_SIGPENDING - signal pending
- * TIF_NEED_RESCHED - rescheduling necessary
- * TIF_NOTIFY_RESUME - callback before returning to user
- */
-#define TIF_SIGPENDING 0
-#define TIF_NEED_RESCHED 1
-#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
-#define TIF_SYSCALL_TRACE 8
-#define TIF_MEMDIE 18
-#define TIF_RESTORE_SIGMASK 20
-
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-
-/*
- * Change these and you break ASM code in entry-common.S
- */
-#define _TIF_WORK_MASK \
- (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_NOTIFY_RESUME)
-
-#endif /* __KERNEL__ */
-#endif /* __UNICORE_THREAD_INFO_H__ */
diff --git a/arch/unicore32/include/asm/timex.h b/arch/unicore32/include/asm/timex.h
deleted file mode 100644
index d714af3dbce1..000000000000
--- a/arch/unicore32/include/asm/timex.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/timex.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_TIMEX_H__
-#define __UNICORE_TIMEX_H__
-
-#ifdef CONFIG_ARCH_FPGA
-
-/* in FPGA, APB clock is 33M, and OST clock is 32K, */
-/* so, 1M is selected for timer interrupt correctly */
-#define CLOCK_TICK_RATE (32*1024)
-
-#endif
-
-#if defined(CONFIG_PUV3_DB0913) \
- || defined(CONFIG_PUV3_NB0916) \
- || defined(CONFIG_PUV3_SMW0919)
-
-#define CLOCK_TICK_RATE (14318000)
-
-#endif
-
-#include <asm-generic/timex.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/tlb.h b/arch/unicore32/include/asm/tlb.h
deleted file mode 100644
index 4663d8cc80ef..000000000000
--- a/arch/unicore32/include/asm/tlb.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/tlb.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_TLB_H__
-#define __UNICORE_TLB_H__
-
-/*
- * unicore32 lacks an efficient flush_tlb_range(), use flush_tlb_mm().
- */
-
-#define __pte_free_tlb(tlb, pte, addr) \
- do { \
- pgtable_pte_page_dtor(pte); \
- tlb_remove_page((tlb), (pte)); \
- } while (0)
-
-#include <asm-generic/tlb.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/tlbflush.h b/arch/unicore32/include/asm/tlbflush.h
deleted file mode 100644
index 1cf18ef55515..000000000000
--- a/arch/unicore32/include/asm/tlbflush.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/tlbflush.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_TLBFLUSH_H__
-#define __UNICORE_TLBFLUSH_H__
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long,
- struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
-
-/*
- * TLB Management
- * ==============
- *
- * The arch/unicore/mm/tlb-*.S files implement these methods.
- *
- * The TLB specific code is expected to perform whatever tests it
- * needs to determine if it should invalidate the TLB for each
- * call. Start addresses are inclusive and end addresses are
- * exclusive; it is safe to round these addresses down.
- *
- * flush_tlb_all()
- *
- * Invalidate the entire TLB.
- *
- * flush_tlb_mm(mm)
- *
- * Invalidate all TLB entries in a particular address
- * space.
- * - mm - mm_struct describing address space
- *
- * flush_tlb_range(mm,start,end)
- *
- * Invalidate a range of TLB entries in the specified
- * address space.
- * - mm - mm_struct describing address space
- * - start - start address (may not be aligned)
- * - end - end address (exclusive, may not be aligned)
- *
- * flush_tlb_page(vaddr,vma)
- *
- * Invalidate the specified page in the specified address range.
- * - vaddr - virtual address (may not be aligned)
- * - vma - vma_struct describing address range
- *
- * flush_kern_tlb_page(kaddr)
- *
- * Invalidate the TLB entry for the specified page. The address
- * will be in the kernels virtual memory space. Current uses
- * only require the D-TLB to be invalidated.
- * - kaddr - Kernel virtual memory address
- */
-
-static inline void local_flush_tlb_all(void)
-{
- const int zero = 0;
-
- /* TLB invalidate all */
- asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (zero) : "cc");
-}
-
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
-{
- const int zero = 0;
-
- if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
- /* TLB invalidate all */
- asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (zero) : "cc");
- }
- put_cpu();
-}
-
-static inline void
-local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
- /* iTLB invalidate page */
- asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (uaddr & PAGE_MASK) : "cc");
- /* dTLB invalidate page */
- asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (uaddr & PAGE_MASK) : "cc");
-#else
- /* TLB invalidate all */
- asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (uaddr & PAGE_MASK) : "cc");
-#endif
- }
-}
-
-static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
-{
-#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
- /* iTLB invalidate page */
- asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (kaddr & PAGE_MASK) : "cc");
- /* dTLB invalidate page */
- asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (kaddr & PAGE_MASK) : "cc");
-#else
- /* TLB invalidate all */
- asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (kaddr & PAGE_MASK) : "cc");
-#endif
-}
-
-/*
- * flush_pmd_entry
- *
- * Flush a PMD entry (word aligned, or double-word aligned) to
- * RAM if the TLB for the CPU we are running on requires this.
- * This is typically used when we are creating PMD entries.
- *
- * clean_pmd_entry
- *
- * Clean (but don't drain the write buffer) if the CPU requires
- * these operations. This is typically used when we are removing
- * PMD entries.
- */
-static inline void flush_pmd_entry(pmd_t *pmd)
-{
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- /* flush dcache line, see dcacheline_flush in proc-macros.S */
- asm("mov r1, %0 << #20\n"
- "ldw r2, =_stext\n"
- "add r2, r2, r1 >> #20\n"
- "ldw r1, [r2+], #0x0000\n"
- "ldw r1, [r2+], #0x1000\n"
- "ldw r1, [r2+], #0x2000\n"
- "ldw r1, [r2+], #0x3000\n"
- : : "r" (pmd) : "r1", "r2");
-#else
- /* flush dcache all */
- asm("movc p0.c5, %0, #14; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (pmd) : "cc");
-#endif
-}
-
-static inline void clean_pmd_entry(pmd_t *pmd)
-{
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- /* clean dcache line */
- asm("movc p0.c5, %0, #11; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (__pa(pmd) & ~(L1_CACHE_BYTES - 1)) : "cc");
-#else
- /* clean dcache all */
- asm("movc p0.c5, %0, #10; nop; nop; nop; nop; nop; nop; nop; nop"
- : : "r" (pmd) : "cc");
-#endif
-}
-
-/*
- * Convert calls to our calling convention.
- */
-#define local_flush_tlb_range(vma, start, end) \
- __cpu_flush_user_tlb_range(start, end, vma)
-#define local_flush_tlb_kernel_range(s, e) \
- __cpu_flush_kern_tlb_range(s, e)
-
-#define flush_tlb_all local_flush_tlb_all
-#define flush_tlb_mm local_flush_tlb_mm
-#define flush_tlb_page local_flush_tlb_page
-#define flush_tlb_kernel_page local_flush_tlb_kernel_page
-#define flush_tlb_range local_flush_tlb_range
-#define flush_tlb_kernel_range local_flush_tlb_kernel_range
-
-/*
- * if PG_dcache_clean is not set for the page, we need to ensure that any
- * cache entries for the kernels virtual memory range are written
- * back to the page.
- */
-extern void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep);
-
-extern void do_bad_area(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs);
-
-#endif
-
-#endif
diff --git a/arch/unicore32/include/asm/traps.h b/arch/unicore32/include/asm/traps.h
deleted file mode 100644
index ad1508a9a903..000000000000
--- a/arch/unicore32/include/asm/traps.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/traps.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_TRAP_H__
-#define __UNICORE_TRAP_H__
-
-extern void __init early_trap_init(void);
-extern void dump_backtrace_entry(unsigned long where,
- unsigned long from, unsigned long frame);
-
-extern void do_DataAbort(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs);
-#endif
diff --git a/arch/unicore32/include/asm/uaccess.h b/arch/unicore32/include/asm/uaccess.h
deleted file mode 100644
index 33c24f430511..000000000000
--- a/arch/unicore32/include/asm/uaccess.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/uaccess.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_UACCESS_H__
-#define __UNICORE_UACCESS_H__
-
-#include <asm/memory.h>
-
-#define __strncpy_from_user __strncpy_from_user
-#define __strnlen_user __strnlen_user
-#define __clear_user __clear_user
-
-#define __kernel_ok (uaccess_kernel())
-#define __user_ok(addr, size) (((size) <= TASK_SIZE) \
- && ((addr) <= TASK_SIZE - (size)))
-#define __access_ok(addr, size) (__kernel_ok || __user_ok((addr), (size)))
-
-extern unsigned long __must_check
-raw_copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check
-raw_copy_to_user(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check
-__clear_user(void __user *addr, unsigned long n);
-extern unsigned long __must_check
-__strncpy_from_user(char *to, const char __user *from, unsigned long count);
-extern unsigned long
-__strnlen_user(const char __user *s, long n);
-#define INLINE_COPY_FROM_USER
-#define INLINE_COPY_TO_USER
-
-#include <asm-generic/uaccess.h>
-
-#endif /* __UNICORE_UACCESS_H__ */
diff --git a/arch/unicore32/include/asm/vmalloc.h b/arch/unicore32/include/asm/vmalloc.h
deleted file mode 100644
index 054435818a14..000000000000
--- a/arch/unicore32/include/asm/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_UNICORE32_VMALLOC_H
-#define _ASM_UNICORE32_VMALLOC_H
-
-#endif /* _ASM_UNICORE32_VMALLOC_H */
diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
deleted file mode 100644
index 78f77517c1c7..000000000000
--- a/arch/unicore32/include/mach/PKUnity.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/PKUnity.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __MACH_PUV3_HARDWARE_H__
-#error You must include hardware.h not PKUnity.h
-#endif
-
-#include <mach/bitfield.h>
-
-/*
- * Memory Definitions
- */
-#define PKUNITY_SDRAM_BASE 0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */
-#define PKUNITY_MMIO_BASE 0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
-
-/*
- * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
- * 0x80000000 - 0x8000000B 12B PCI Configuration regs
- * 0x80010000 - 0x80010250 592B PCI Bridge Base
- * 0x80030000 - 0x8003FFFF 64KB PCI Legacy IO
- * 0x90000000 - 0x97FFFFFF 128MB PCI AHB-PCI MEM-mapping
- * 0x98000000 - 0x9FFFFFFF 128MB PCI PCI-AHB MEM-mapping
- */
-#define PKUNITY_PCI_BASE io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */
-#include <mach/regs-pci.h>
-
-#define PKUNITY_PCICFG_BASE (PKUNITY_PCI_BASE + 0x0)
-#define PKUNITY_PCIBRI_BASE (PKUNITY_PCI_BASE + 0x00010000)
-#define PKUNITY_PCILIO_BASE (PKUNITY_PCI_BASE + 0x00030000)
-#define PKUNITY_PCIMEM_BASE (PKUNITY_PCI_BASE + 0x10000000)
-#define PKUNITY_PCIAHB_BASE (PKUNITY_PCI_BASE + 0x18000000)
-
-/*
- * PKUNITY System Bus Addresses (AHB): 0xC0000000 - 0xEDFFFFFF (640MB)
- */
-#define PKUNITY_AHB_BASE io_p2v(0xC0000000)
-
-/* AHB-0 is DDR2 SDRAM */
-/* AHB-1 is PCI Space */
-#define PKUNITY_ARBITER_BASE (PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */
-#define PKUNITY_DDR2CTRL_BASE (PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */
-#define PKUNITY_DMAC_BASE (PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */
-#include <mach/regs-dmac.h>
-#define PKUNITY_UMAL_BASE (PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */
-#include <mach/regs-umal.h>
-#define PKUNITY_USB_BASE (PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */
-#define PKUNITY_SATA_BASE (PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */
-#define PKUNITY_SMC_BASE (PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */
-/* AHB-9 is for APB bridge */
-#define PKUNITY_MME_BASE (PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */
-#define PKUNITY_UNIGFX_BASE (PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */
-#include <mach/regs-unigfx.h>
-#define PKUNITY_NAND_BASE (PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */
-#include <mach/regs-nand.h>
-#define PKUNITY_H264D_BASE (PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */
-#define PKUNITY_H264E_BASE (PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */
-
-/*
- * PKUNITY Peripheral Bus Addresses (APB): 0xEE000000 - 0xEFFFFFFF (128MB)
- */
-#define PKUNITY_APB_BASE io_p2v(0xEE000000)
-
-#define PKUNITY_UART0_BASE (PKUNITY_APB_BASE + 0x000000) /* APB-0 */
-#define PKUNITY_UART1_BASE (PKUNITY_APB_BASE + 0x100000) /* APB-1 */
-#include <mach/regs-uart.h>
-#define PKUNITY_I2C_BASE (PKUNITY_APB_BASE + 0x200000) /* APB-2 */
-#include <mach/regs-i2c.h>
-#define PKUNITY_SPI_BASE (PKUNITY_APB_BASE + 0x300000) /* APB-3 */
-#include <mach/regs-spi.h>
-#define PKUNITY_AC97_BASE (PKUNITY_APB_BASE + 0x400000) /* APB-4 */
-#include <mach/regs-ac97.h>
-#define PKUNITY_GPIO_BASE (PKUNITY_APB_BASE + 0x500000) /* APB-5 */
-#include <mach/regs-gpio.h>
-#define PKUNITY_INTC_BASE (PKUNITY_APB_BASE + 0x600000) /* APB-6 */
-#include <mach/regs-intc.h>
-#define PKUNITY_RTC_BASE (PKUNITY_APB_BASE + 0x700000) /* APB-7 */
-#include <mach/regs-rtc.h>
-#define PKUNITY_OST_BASE (PKUNITY_APB_BASE + 0x800000) /* APB-8 */
-#include <mach/regs-ost.h>
-#define PKUNITY_RESETC_BASE (PKUNITY_APB_BASE + 0x900000) /* APB-9 */
-#include <mach/regs-resetc.h>
-#define PKUNITY_PM_BASE (PKUNITY_APB_BASE + 0xA00000) /* APB-10 */
-#include <mach/regs-pm.h>
-#define PKUNITY_PS2_BASE (PKUNITY_APB_BASE + 0xB00000) /* APB-11 */
-#include <mach/regs-ps2.h>
-#define PKUNITY_SDC_BASE (PKUNITY_APB_BASE + 0xC00000) /* APB-12 */
-#include <mach/regs-sdc.h>
-
diff --git a/arch/unicore32/include/mach/bitfield.h b/arch/unicore32/include/mach/bitfield.h
deleted file mode 100644
index 766b7f01f1cd..000000000000
--- a/arch/unicore32/include/mach/bitfield.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/bitfield.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __MACH_PUV3_BITFIELD_H__
-#define __MACH_PUV3_BITFIELD_H__
-
-#ifndef __ASSEMBLY__
-#define UData(Data) ((unsigned long) (Data))
-#else
-#define UData(Data) (Data)
-#endif
-
-#define FIELD(val, vmask, vshift) (((val) & ((UData(1) << (vmask)) - 1)) << (vshift))
-#define FMASK(vmask, vshift) (((UData(1) << (vmask)) - 1) << (vshift))
-
-#endif /* __MACH_PUV3_BITFIELD_H__ */
diff --git a/arch/unicore32/include/mach/dma.h b/arch/unicore32/include/mach/dma.h
deleted file mode 100644
index 271001cd13c4..000000000000
--- a/arch/unicore32/include/mach/dma.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/dma.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __MACH_PUV3_DMA_H__
-#define __MACH_PUV3_DMA_H__
-
-/*
- * The PKUnity has six internal DMA channels.
- */
-#define MAX_DMA_CHANNELS 6
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} puv3_dma_prio;
-
-/*
- * DMA registration
- */
-
-extern int puv3_request_dma(char *name,
- puv3_dma_prio prio,
- void (*irq_handler)(int, void *),
- void (*err_handler)(int, void *),
- void *data);
-
-extern void puv3_free_dma(int dma_ch);
-
-static inline void puv3_stop_dma(int ch)
-{
- writel(readl(DMAC_CONFIG(ch)) & ~DMAC_CONFIG_EN, DMAC_CONFIG(ch));
-}
-
-static inline void puv3_resume_dma(int ch)
-{
- writel(readl(DMAC_CONFIG(ch)) | DMAC_CONFIG_EN, DMAC_CONFIG(ch));
-}
-
-#endif /* __MACH_PUV3_DMA_H__ */
diff --git a/arch/unicore32/include/mach/hardware.h b/arch/unicore32/include/mach/hardware.h
deleted file mode 100644
index 2d7571cbd1d0..000000000000
--- a/arch/unicore32/include/mach/hardware.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/hardware.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This file contains the hardware definitions for PKUnity architecture
- */
-
-#ifndef __MACH_PUV3_HARDWARE_H__
-#define __MACH_PUV3_HARDWARE_H__
-
-#include <mach/PKUnity.h>
-
-#ifndef __ASSEMBLY__
-#define io_p2v(x) (void __iomem *)((x) - PKUNITY_MMIO_BASE)
-#define io_v2p(x) (phys_addr_t)((x) + PKUNITY_MMIO_BASE)
-#else
-#define io_p2v(x) ((x) - PKUNITY_MMIO_BASE)
-#define io_v2p(x) ((x) + PKUNITY_MMIO_BASE)
-#endif
-
-#define PCIBIOS_MIN_IO 0x4000 /* should lower than 64KB */
-#define PCIBIOS_MIN_MEM io_v2p(PKUNITY_PCIMEM_BASE)
-
-#define pcibios_assign_all_busses() 1
-
-#endif /* __MACH_PUV3_HARDWARE_H__ */
diff --git a/arch/unicore32/include/mach/map.h b/arch/unicore32/include/mach/map.h
deleted file mode 100644
index 7a83eeeb1287..000000000000
--- a/arch/unicore32/include/mach/map.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/map.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Page table mapping constructs and function prototypes
- */
-#define MT_DEVICE 0
-#define MT_DEVICE_CACHED 2
-#define MT_KUSER 7
-#define MT_HIGH_VECTORS 8
-#define MT_MEMORY 9
-#define MT_ROM 10
-
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
deleted file mode 100644
index b4e6035cb9a3..000000000000
--- a/arch/unicore32/include/mach/memory.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/memory.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __MACH_PUV3_MEMORY_H__
-#define __MACH_PUV3_MEMORY_H__
-
-#include <mach/hardware.h>
-
-/* Physical DRAM offset. */
-#define PHYS_OFFSET UL(0x00000000)
-/* The base address of exception vectors. */
-#define VECTORS_BASE UL(0xffff0000)
-/* The base address of kuser area. */
-#define KUSER_BASE UL(0x80000000)
-
-#ifdef __ASSEMBLY__
-/* The byte offset of the kernel image in RAM from the start of RAM. */
-#define KERNEL_IMAGE_START 0x00408000
-#endif
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void puv3_pci_adjust_zones(unsigned long *max_zone_pfn);
-
-#define arch_adjust_zones(max_zone_pfn) \
- puv3_pci_adjust_zones(max_zone_pfn)
-
-#endif
-
-/*
- * PCI controller in PKUnity-3 masks highest 5-bit for upstream channel,
- * so we must limit the DMA allocation within 128M physical memory for
- * supporting PCI devices.
- */
-#define PCI_DMA_THRESHOLD (PHYS_OFFSET + SZ_128M - 1)
-
-#define is_pcibus_device(dev) (dev && \
- (strncmp(dev->bus->name, "pci", 3) == 0))
-
-#define __virt_to_pcibus(x) (__virt_to_phys((x) + PKUNITY_PCIAHB_BASE))
-#define __pcibus_to_virt(x) (__phys_to_virt(x) - PKUNITY_PCIAHB_BASE)
-
-/* kuser area */
-#define KUSER_VECPAGE_BASE (KUSER_BASE + UL(0x3fff0000))
-/* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
-#define kuser_vecpage_to_vectors(x) ((x) - (KUSER_VECPAGE_BASE) \
- + (VECTORS_BASE))
-
-#endif
diff --git a/arch/unicore32/include/mach/ocd.h b/arch/unicore32/include/mach/ocd.h
deleted file mode 100644
index 2a814929e389..000000000000
--- a/arch/unicore32/include/mach/ocd.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/ocd.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __MACH_PUV3_OCD_H__
-#define __MACH_PUV3_OCD_H__
-
-#if defined(CONFIG_DEBUG_OCD)
-static inline void ocd_putc(unsigned int c)
-{
- int status, i = 0x2000000;
-
- do {
- if (--i < 0)
- return;
-
- asm volatile ("movc %0, p1.c0, #0" : "=r" (status));
- } while (status & 2);
-
- asm("movc p1.c1, %0, #1" : : "r" (c));
-}
-
-#define putc(ch) ocd_putc(ch)
-#else
-#define putc(ch)
-#endif
-
-#endif
diff --git a/arch/unicore32/include/mach/pm.h b/arch/unicore32/include/mach/pm.h
deleted file mode 100644
index cb40b8490a57..000000000000
--- a/arch/unicore32/include/mach/pm.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore/include/mach/pm.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __PUV3_PM_H__
-#define __PUV3_PM_H__
-
-#include <linux/suspend.h>
-
-struct puv3_cpu_pm_fns {
- int save_count;
- void (*save)(unsigned long *);
- void (*restore)(unsigned long *);
- int (*valid)(suspend_state_t state);
- void (*enter)(suspend_state_t state);
- int (*prepare)(void);
- void (*finish)(void);
-};
-
-extern struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
-
-/* sleep.S */
-extern void puv3_cpu_suspend(unsigned int);
-
-extern void puv3_cpu_resume(void);
-
-extern int puv3_pm_enter(suspend_state_t state);
-
-/* Defined in hibernate_asm.S */
-extern int restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist);
-
-extern struct pbe *restore_pblist;
-#endif
diff --git a/arch/unicore32/include/mach/regs-ac97.h b/arch/unicore32/include/mach/regs-ac97.h
deleted file mode 100644
index 85c601898d02..000000000000
--- a/arch/unicore32/include/mach/regs-ac97.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity AC97 Registers
- */
-
-#define PKUNITY_AC97_CONR (PKUNITY_AC97_BASE + 0x0000)
-#define PKUNITY_AC97_OCR (PKUNITY_AC97_BASE + 0x0004)
-#define PKUNITY_AC97_ICR (PKUNITY_AC97_BASE + 0x0008)
-#define PKUNITY_AC97_CRAC (PKUNITY_AC97_BASE + 0x000C)
-#define PKUNITY_AC97_INTR (PKUNITY_AC97_BASE + 0x0010)
-#define PKUNITY_AC97_INTRSTAT (PKUNITY_AC97_BASE + 0x0014)
-#define PKUNITY_AC97_INTRCLEAR (PKUNITY_AC97_BASE + 0x0018)
-#define PKUNITY_AC97_ENABLE (PKUNITY_AC97_BASE + 0x001C)
-#define PKUNITY_AC97_OUT_FIFO (PKUNITY_AC97_BASE + 0x0020)
-#define PKUNITY_AC97_IN_FIFO (PKUNITY_AC97_BASE + 0x0030)
-
-#define AC97_CODEC_REG(v) FIELD((v), 7, 16)
-#define AC97_CODEC_VAL(v) FIELD((v), 16, 0)
-#define AC97_CODEC_WRITECOMPLETE FIELD(1, 1, 2)
-
-/*
- * VAR PLAY SAMPLE RATE
- */
-#define AC97_CMD_VPSAMPLE (FIELD(3, 2, 16) | FIELD(3, 2, 0))
-
-/*
- * FIX CAPTURE SAMPLE RATE
- */
-#define AC97_CMD_FCSAMPLE FIELD(7, 3, 0)
-
-#define AC97_CMD_RESET FIELD(1, 1, 0)
-#define AC97_CMD_ENABLE FIELD(1, 1, 0)
-#define AC97_CMD_DISABLE FIELD(0, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-dmac.h b/arch/unicore32/include/mach/regs-dmac.h
deleted file mode 100644
index bbdc52d06a98..000000000000
--- a/arch/unicore32/include/mach/regs-dmac.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Direct Memory Access Controller (DMAC)
- */
-
-/*
- * Interrupt Status Reg DMAC_ISR.
- */
-#define DMAC_ISR (PKUNITY_DMAC_BASE + 0x0020)
-/*
- * Interrupt Transfer Complete Status Reg DMAC_ITCSR.
- */
-#define DMAC_ITCSR (PKUNITY_DMAC_BASE + 0x0050)
-/*
- * Interrupt Transfer Complete Clear Reg DMAC_ITCCR.
- */
-#define DMAC_ITCCR (PKUNITY_DMAC_BASE + 0x0060)
-/*
- * Interrupt Error Status Reg DMAC_IESR.
- */
-#define DMAC_IESR (PKUNITY_DMAC_BASE + 0x0080)
-/*
- * Interrupt Error Clear Reg DMAC_IECR.
- */
-#define DMAC_IECR (PKUNITY_DMAC_BASE + 0x0090)
-/*
- * Enable Channels Reg DMAC_ENCH.
- */
-#define DMAC_ENCH (PKUNITY_DMAC_BASE + 0x00B0)
-
-/*
- * DMA control reg. Space [byte]
- */
-#define DMASp 0x00000100
-
-/*
- * Source Addr DMAC_SRCADDR(ch).
- */
-#define DMAC_SRCADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x00)
-/*
- * Destination Addr DMAC_DESTADDR(ch).
- */
-#define DMAC_DESTADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x04)
-/*
- * Control Reg DMAC_CONTROL(ch).
- */
-#define DMAC_CONTROL(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x0C)
-/*
- * Configuration Reg DMAC_CONFIG(ch).
- */
-#define DMAC_CONFIG(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x10)
-
-#define DMAC_IR_MASK FMASK(6, 0)
-/*
- * select channel (ch)
- */
-#define DMAC_CHANNEL(ch) FIELD(1, 1, (ch))
-
-#define DMAC_CONTROL_SIZE_BYTE(v) (FIELD((v), 12, 14) | \
- FIELD(0, 3, 9) | FIELD(0, 3, 6))
-#define DMAC_CONTROL_SIZE_HWORD(v) (FIELD((v) >> 1, 12, 14) | \
- FIELD(1, 3, 9) | FIELD(1, 3, 6))
-#define DMAC_CONTROL_SIZE_WORD(v) (FIELD((v) >> 2, 12, 14) | \
- FIELD(2, 3, 9) | FIELD(2, 3, 6))
-#define DMAC_CONTROL_DI FIELD(1, 1, 13)
-#define DMAC_CONTROL_SI FIELD(1, 1, 12)
-#define DMAC_CONTROL_BURST_1BYTE (FIELD(0, 3, 3) | FIELD(0, 3, 0))
-#define DMAC_CONTROL_BURST_4BYTE (FIELD(3, 3, 3) | FIELD(3, 3, 0))
-#define DMAC_CONTROL_BURST_8BYTE (FIELD(5, 3, 3) | FIELD(5, 3, 0))
-#define DMAC_CONTROL_BURST_16BYTE (FIELD(7, 3, 3) | FIELD(7, 3, 0))
-
-#define DMAC_CONFIG_UART0_WR (FIELD(2, 4, 11) | FIELD(1, 2, 1))
-#define DMAC_CONFIG_UART0_RD (FIELD(2, 4, 7) | FIELD(2, 2, 1))
-#define DMAC_CONFIG_UART1_WR (FIELD(3, 4, 11) | FIELD(1, 2, 1))
-#define DMAC_CONFIG_UART1RD (FIELD(3, 4, 7) | FIELD(2, 2, 1))
-#define DMAC_CONFIG_AC97WR (FIELD(4, 4, 11) | FIELD(1, 2, 1))
-#define DMAC_CONFIG_AC97RD (FIELD(4, 4, 7) | FIELD(2, 2, 1))
-#define DMAC_CONFIG_MMCWR (FIELD(7, 4, 11) | FIELD(1, 2, 1))
-#define DMAC_CONFIG_MMCRD (FIELD(7, 4, 7) | FIELD(2, 2, 1))
-#define DMAC_CONFIG_MASKITC FIELD(1, 1, 4)
-#define DMAC_CONFIG_MASKIE FIELD(1, 1, 3)
-#define DMAC_CONFIG_EN FIELD(1, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-gpio.h b/arch/unicore32/include/mach/regs-gpio.h
deleted file mode 100644
index 5fc701ee33e3..000000000000
--- a/arch/unicore32/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity General-Purpose Input/Output (GPIO) Registers
- */
-
-/*
- * Voltage Status Reg GPIO_GPLR.
- */
-#define GPIO_GPLR (PKUNITY_GPIO_BASE + 0x0000)
-/*
- * Pin Direction Reg GPIO_GPDR.
- */
-#define GPIO_GPDR (PKUNITY_GPIO_BASE + 0x0004)
-/*
- * Output Pin Set Reg GPIO_GPSR.
- */
-#define GPIO_GPSR (PKUNITY_GPIO_BASE + 0x0008)
-/*
- * Output Pin Clear Reg GPIO_GPCR.
- */
-#define GPIO_GPCR (PKUNITY_GPIO_BASE + 0x000C)
-/*
- * Raise Edge Detect Reg GPIO_GRER.
- */
-#define GPIO_GRER (PKUNITY_GPIO_BASE + 0x0010)
-/*
- * Fall Edge Detect Reg GPIO_GFER.
- */
-#define GPIO_GFER (PKUNITY_GPIO_BASE + 0x0014)
-/*
- * Edge Status Reg GPIO_GEDR.
- */
-#define GPIO_GEDR (PKUNITY_GPIO_BASE + 0x0018)
-/*
- * Special Voltage Detect Reg GPIO_GPIR.
- */
-#define GPIO_GPIR (PKUNITY_GPIO_BASE + 0x0020)
-
-#define GPIO_MIN (0)
-#define GPIO_MAX (27)
-
-#define GPIO_GPIO(Nb) (0x00000001 << (Nb)) /* GPIO [0..27] */
-#define GPIO_GPIO0 GPIO_GPIO(0) /* GPIO [0] */
-#define GPIO_GPIO1 GPIO_GPIO(1) /* GPIO [1] */
-#define GPIO_GPIO2 GPIO_GPIO(2) /* GPIO [2] */
-#define GPIO_GPIO3 GPIO_GPIO(3) /* GPIO [3] */
-#define GPIO_GPIO4 GPIO_GPIO(4) /* GPIO [4] */
-#define GPIO_GPIO5 GPIO_GPIO(5) /* GPIO [5] */
-#define GPIO_GPIO6 GPIO_GPIO(6) /* GPIO [6] */
-#define GPIO_GPIO7 GPIO_GPIO(7) /* GPIO [7] */
-#define GPIO_GPIO8 GPIO_GPIO(8) /* GPIO [8] */
-#define GPIO_GPIO9 GPIO_GPIO(9) /* GPIO [9] */
-#define GPIO_GPIO10 GPIO_GPIO(10) /* GPIO [10] */
-#define GPIO_GPIO11 GPIO_GPIO(11) /* GPIO [11] */
-#define GPIO_GPIO12 GPIO_GPIO(12) /* GPIO [12] */
-#define GPIO_GPIO13 GPIO_GPIO(13) /* GPIO [13] */
-#define GPIO_GPIO14 GPIO_GPIO(14) /* GPIO [14] */
-#define GPIO_GPIO15 GPIO_GPIO(15) /* GPIO [15] */
-#define GPIO_GPIO16 GPIO_GPIO(16) /* GPIO [16] */
-#define GPIO_GPIO17 GPIO_GPIO(17) /* GPIO [17] */
-#define GPIO_GPIO18 GPIO_GPIO(18) /* GPIO [18] */
-#define GPIO_GPIO19 GPIO_GPIO(19) /* GPIO [19] */
-#define GPIO_GPIO20 GPIO_GPIO(20) /* GPIO [20] */
-#define GPIO_GPIO21 GPIO_GPIO(21) /* GPIO [21] */
-#define GPIO_GPIO22 GPIO_GPIO(22) /* GPIO [22] */
-#define GPIO_GPIO23 GPIO_GPIO(23) /* GPIO [23] */
-#define GPIO_GPIO24 GPIO_GPIO(24) /* GPIO [24] */
-#define GPIO_GPIO25 GPIO_GPIO(25) /* GPIO [25] */
-#define GPIO_GPIO26 GPIO_GPIO(26) /* GPIO [26] */
-#define GPIO_GPIO27 GPIO_GPIO(27) /* GPIO [27] */
-
diff --git a/arch/unicore32/include/mach/regs-i2c.h b/arch/unicore32/include/mach/regs-i2c.h
deleted file mode 100644
index b41aa7c92430..000000000000
--- a/arch/unicore32/include/mach/regs-i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Inter-integrated Circuit (I2C) Registers
- */
-
-/*
- * Control Reg I2C_CON.
- */
-#define I2C_CON (PKUNITY_I2C_BASE + 0x0000)
-/*
- * Target Address Reg I2C_TAR.
- */
-#define I2C_TAR (PKUNITY_I2C_BASE + 0x0004)
-/*
- * Data buffer and command Reg I2C_DATACMD.
- */
-#define I2C_DATACMD (PKUNITY_I2C_BASE + 0x0010)
-/*
- * Enable Reg I2C_ENABLE.
- */
-#define I2C_ENABLE (PKUNITY_I2C_BASE + 0x006C)
-/*
- * Status Reg I2C_STATUS.
- */
-#define I2C_STATUS (PKUNITY_I2C_BASE + 0x0070)
-/*
- * Tx FIFO Length Reg I2C_TXFLR.
- */
-#define I2C_TXFLR (PKUNITY_I2C_BASE + 0x0074)
-/*
- * Rx FIFO Length Reg I2C_RXFLR.
- */
-#define I2C_RXFLR (PKUNITY_I2C_BASE + 0x0078)
-/*
- * Enable Status Reg I2C_ENSTATUS.
- */
-#define I2C_ENSTATUS (PKUNITY_I2C_BASE + 0x009C)
-
-#define I2C_CON_MASTER FIELD(1, 1, 0)
-#define I2C_CON_SPEED_STD FIELD(1, 2, 1)
-#define I2C_CON_SPEED_FAST FIELD(2, 2, 1)
-#define I2C_CON_RESTART FIELD(1, 1, 5)
-#define I2C_CON_SLAVEDISABLE FIELD(1, 1, 6)
-
-#define I2C_DATACMD_READ FIELD(1, 1, 8)
-#define I2C_DATACMD_WRITE FIELD(0, 1, 8)
-#define I2C_DATACMD_DAT_MASK FMASK(8, 0)
-#define I2C_DATACMD_DAT(v) FIELD((v), 8, 0)
-
-#define I2C_ENABLE_ENABLE FIELD(1, 1, 0)
-#define I2C_ENABLE_DISABLE FIELD(0, 1, 0)
-
-#define I2C_STATUS_RFF FIELD(1, 1, 4)
-#define I2C_STATUS_RFNE FIELD(1, 1, 3)
-#define I2C_STATUS_TFE FIELD(1, 1, 2)
-#define I2C_STATUS_TFNF FIELD(1, 1, 1)
-#define I2C_STATUS_ACTIVITY FIELD(1, 1, 0)
-
-#define I2C_ENSTATUS_ENABLE FIELD(1, 1, 0)
-
-#define I2C_TAR_THERMAL 0x4f
-#define I2C_TAR_SPD 0x50
-#define I2C_TAR_PWIC 0x55
-#define I2C_TAR_EEPROM 0x57
diff --git a/arch/unicore32/include/mach/regs-intc.h b/arch/unicore32/include/mach/regs-intc.h
deleted file mode 100644
index 4eb1b5b571bb..000000000000
--- a/arch/unicore32/include/mach/regs-intc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUNITY Interrupt Controller (INTC) Registers
- */
-/*
- * INTC Level Reg INTC_ICLR.
- */
-#define INTC_ICLR (PKUNITY_INTC_BASE + 0x0000)
-/*
- * INTC Mask Reg INTC_ICMR.
- */
-#define INTC_ICMR (PKUNITY_INTC_BASE + 0x0004)
-/*
- * INTC Pending Reg INTC_ICPR.
- */
-#define INTC_ICPR (PKUNITY_INTC_BASE + 0x0008)
-/*
- * INTC IRQ Pending Reg INTC_ICIP.
- */
-#define INTC_ICIP (PKUNITY_INTC_BASE + 0x000C)
-/*
- * INTC REAL Pending Reg INTC_ICFP.
- */
-#define INTC_ICFP (PKUNITY_INTC_BASE + 0x0010)
-/*
- * INTC Control Reg INTC_ICCR.
- */
-#define INTC_ICCR (PKUNITY_INTC_BASE + 0x0014)
-
diff --git a/arch/unicore32/include/mach/regs-nand.h b/arch/unicore32/include/mach/regs-nand.h
deleted file mode 100644
index 7f29939251ef..000000000000
--- a/arch/unicore32/include/mach/regs-nand.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity NAND Controller Registers
- */
-/*
- * ID Reg. 0 NAND_IDR0
- */
-#define NAND_IDR0 (PKUNITY_NAND_BASE + 0x0000)
-/*
- * ID Reg. 1 NAND_IDR1
- */
-#define NAND_IDR1 (PKUNITY_NAND_BASE + 0x0004)
-/*
- * ID Reg. 2 NAND_IDR2
- */
-#define NAND_IDR2 (PKUNITY_NAND_BASE + 0x0008)
-/*
- * ID Reg. 3 NAND_IDR3
- */
-#define NAND_IDR3 (PKUNITY_NAND_BASE + 0x000C)
-/*
- * Page Address Reg 0 NAND_PAR0
- */
-#define NAND_PAR0 (PKUNITY_NAND_BASE + 0x0010)
-/*
- * Page Address Reg 1 NAND_PAR1
- */
-#define NAND_PAR1 (PKUNITY_NAND_BASE + 0x0014)
-/*
- * Page Address Reg 2 NAND_PAR2
- */
-#define NAND_PAR2 (PKUNITY_NAND_BASE + 0x0018)
-/*
- * ECC Enable Reg NAND_ECCEN
- */
-#define NAND_ECCEN (PKUNITY_NAND_BASE + 0x001C)
-/*
- * Buffer Reg NAND_BUF
- */
-#define NAND_BUF (PKUNITY_NAND_BASE + 0x0020)
-/*
- * ECC Status Reg NAND_ECCSR
- */
-#define NAND_ECCSR (PKUNITY_NAND_BASE + 0x0024)
-/*
- * Command Reg NAND_CMD
- */
-#define NAND_CMD (PKUNITY_NAND_BASE + 0x0028)
-/*
- * DMA Configure Reg NAND_DMACR
- */
-#define NAND_DMACR (PKUNITY_NAND_BASE + 0x002C)
-/*
- * Interrupt Reg NAND_IR
- */
-#define NAND_IR (PKUNITY_NAND_BASE + 0x0030)
-/*
- * Interrupt Mask Reg NAND_IMR
- */
-#define NAND_IMR (PKUNITY_NAND_BASE + 0x0034)
-/*
- * Chip Enable Reg NAND_CHIPEN
- */
-#define NAND_CHIPEN (PKUNITY_NAND_BASE + 0x0038)
-/*
- * Address Reg NAND_ADDR
- */
-#define NAND_ADDR (PKUNITY_NAND_BASE + 0x003C)
-
-/*
- * Command bits NAND_CMD_CMD_MASK
- */
-#define NAND_CMD_CMD_MASK FMASK(4, 4)
-#define NAND_CMD_CMD_READPAGE FIELD(0x0, 4, 4)
-#define NAND_CMD_CMD_ERASEBLOCK FIELD(0x6, 4, 4)
-#define NAND_CMD_CMD_READSTATUS FIELD(0x7, 4, 4)
-#define NAND_CMD_CMD_WRITEPAGE FIELD(0x8, 4, 4)
-#define NAND_CMD_CMD_READID FIELD(0x9, 4, 4)
-#define NAND_CMD_CMD_RESET FIELD(0xf, 4, 4)
-
diff --git a/arch/unicore32/include/mach/regs-ost.h b/arch/unicore32/include/mach/regs-ost.h
deleted file mode 100644
index 6c63e7b7569e..000000000000
--- a/arch/unicore32/include/mach/regs-ost.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Operating System Timer (OST) Registers
- */
-/*
- * Match Reg 0 OST_OSMR0
- */
-#define OST_OSMR0 (PKUNITY_OST_BASE + 0x0000)
-/*
- * Match Reg 1 OST_OSMR1
- */
-#define OST_OSMR1 (PKUNITY_OST_BASE + 0x0004)
-/*
- * Match Reg 2 OST_OSMR2
- */
-#define OST_OSMR2 (PKUNITY_OST_BASE + 0x0008)
-/*
- * Match Reg 3 OST_OSMR3
- */
-#define OST_OSMR3 (PKUNITY_OST_BASE + 0x000C)
-/*
- * Counter Reg OST_OSCR
- */
-#define OST_OSCR (PKUNITY_OST_BASE + 0x0010)
-/*
- * Status Reg OST_OSSR
- */
-#define OST_OSSR (PKUNITY_OST_BASE + 0x0014)
-/*
- * Watchdog Enable Reg OST_OWER
- */
-#define OST_OWER (PKUNITY_OST_BASE + 0x0018)
-/*
- * Interrupt Enable Reg OST_OIER
- */
-#define OST_OIER (PKUNITY_OST_BASE + 0x001C)
-
-/*
- * PWM Registers: IO base address: PKUNITY_OST_BASE + 0x80
- * PWCR: Pulse Width Control Reg
- * DCCR: Duty Cycle Control Reg
- * PCR: Period Control Reg
- */
-#define OST_PWM_PWCR (0x00)
-#define OST_PWM_DCCR (0x04)
-#define OST_PWM_PCR (0x08)
-
-/*
- * Match detected 0 OST_OSSR_M0
- */
-#define OST_OSSR_M0 FIELD(1, 1, 0)
-/*
- * Match detected 1 OST_OSSR_M1
- */
-#define OST_OSSR_M1 FIELD(1, 1, 1)
-/*
- * Match detected 2 OST_OSSR_M2
- */
-#define OST_OSSR_M2 FIELD(1, 1, 2)
-/*
- * Match detected 3 OST_OSSR_M3
- */
-#define OST_OSSR_M3 FIELD(1, 1, 3)
-
-/*
- * Interrupt enable 0 OST_OIER_E0
- */
-#define OST_OIER_E0 FIELD(1, 1, 0)
-/*
- * Interrupt enable 1 OST_OIER_E1
- */
-#define OST_OIER_E1 FIELD(1, 1, 1)
-/*
- * Interrupt enable 2 OST_OIER_E2
- */
-#define OST_OIER_E2 FIELD(1, 1, 2)
-/*
- * Interrupt enable 3 OST_OIER_E3
- */
-#define OST_OIER_E3 FIELD(1, 1, 3)
-
-/*
- * Watchdog Match Enable OST_OWER_WME
- */
-#define OST_OWER_WME FIELD(1, 1, 0)
-
-/*
- * PWM Full Duty Cycle OST_PWMDCCR_FDCYCLE
- */
-#define OST_PWMDCCR_FDCYCLE FIELD(1, 1, 10)
-
diff --git a/arch/unicore32/include/mach/regs-pci.h b/arch/unicore32/include/mach/regs-pci.h
deleted file mode 100644
index 25bb307b87c3..000000000000
--- a/arch/unicore32/include/mach/regs-pci.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity AHB-PCI Bridge Registers
- */
-
-/*
- * AHB/PCI fixed physical address for pci addess configuration
- */
-/*
- * PCICFG Bridge Base Reg.
- */
-#define PCICFG_BRIBASE (PKUNITY_PCICFG_BASE + 0x0000)
-/*
- * PCICFG Address Reg.
- */
-#define PCICFG_ADDR (PKUNITY_PCICFG_BASE + 0x0004)
-/*
- * PCICFG Address Reg.
- */
-#define PCICFG_DATA (PKUNITY_PCICFG_BASE + 0x0008)
-
-/*
- * PCI Bridge configuration space
- */
-#define PCIBRI_ID (PKUNITY_PCIBRI_BASE + 0x0000)
-#define PCIBRI_CMD (PKUNITY_PCIBRI_BASE + 0x0004)
-#define PCIBRI_CLASS (PKUNITY_PCIBRI_BASE + 0x0008)
-#define PCIBRI_LTR (PKUNITY_PCIBRI_BASE + 0x000C)
-#define PCIBRI_BAR0 (PKUNITY_PCIBRI_BASE + 0x0010)
-#define PCIBRI_BAR1 (PKUNITY_PCIBRI_BASE + 0x0014)
-#define PCIBRI_BAR2 (PKUNITY_PCIBRI_BASE + 0x0018)
-#define PCIBRI_BAR3 (PKUNITY_PCIBRI_BASE + 0x001C)
-#define PCIBRI_BAR4 (PKUNITY_PCIBRI_BASE + 0x0020)
-#define PCIBRI_BAR5 (PKUNITY_PCIBRI_BASE + 0x0024)
-
-#define PCIBRI_PCICTL0 (PKUNITY_PCIBRI_BASE + 0x0100)
-#define PCIBRI_PCIBAR0 (PKUNITY_PCIBRI_BASE + 0x0104)
-#define PCIBRI_PCIAMR0 (PKUNITY_PCIBRI_BASE + 0x0108)
-#define PCIBRI_PCITAR0 (PKUNITY_PCIBRI_BASE + 0x010C)
-#define PCIBRI_PCICTL1 (PKUNITY_PCIBRI_BASE + 0x0110)
-#define PCIBRI_PCIBAR1 (PKUNITY_PCIBRI_BASE + 0x0114)
-#define PCIBRI_PCIAMR1 (PKUNITY_PCIBRI_BASE + 0x0118)
-#define PCIBRI_PCITAR1 (PKUNITY_PCIBRI_BASE + 0x011C)
-#define PCIBRI_PCICTL2 (PKUNITY_PCIBRI_BASE + 0x0120)
-#define PCIBRI_PCIBAR2 (PKUNITY_PCIBRI_BASE + 0x0124)
-#define PCIBRI_PCIAMR2 (PKUNITY_PCIBRI_BASE + 0x0128)
-#define PCIBRI_PCITAR2 (PKUNITY_PCIBRI_BASE + 0x012C)
-#define PCIBRI_PCICTL3 (PKUNITY_PCIBRI_BASE + 0x0130)
-#define PCIBRI_PCIBAR3 (PKUNITY_PCIBRI_BASE + 0x0134)
-#define PCIBRI_PCIAMR3 (PKUNITY_PCIBRI_BASE + 0x0138)
-#define PCIBRI_PCITAR3 (PKUNITY_PCIBRI_BASE + 0x013C)
-#define PCIBRI_PCICTL4 (PKUNITY_PCIBRI_BASE + 0x0140)
-#define PCIBRI_PCIBAR4 (PKUNITY_PCIBRI_BASE + 0x0144)
-#define PCIBRI_PCIAMR4 (PKUNITY_PCIBRI_BASE + 0x0148)
-#define PCIBRI_PCITAR4 (PKUNITY_PCIBRI_BASE + 0x014C)
-#define PCIBRI_PCICTL5 (PKUNITY_PCIBRI_BASE + 0x0150)
-#define PCIBRI_PCIBAR5 (PKUNITY_PCIBRI_BASE + 0x0154)
-#define PCIBRI_PCIAMR5 (PKUNITY_PCIBRI_BASE + 0x0158)
-#define PCIBRI_PCITAR5 (PKUNITY_PCIBRI_BASE + 0x015C)
-
-#define PCIBRI_AHBCTL0 (PKUNITY_PCIBRI_BASE + 0x0180)
-#define PCIBRI_AHBBAR0 (PKUNITY_PCIBRI_BASE + 0x0184)
-#define PCIBRI_AHBAMR0 (PKUNITY_PCIBRI_BASE + 0x0188)
-#define PCIBRI_AHBTAR0 (PKUNITY_PCIBRI_BASE + 0x018C)
-#define PCIBRI_AHBCTL1 (PKUNITY_PCIBRI_BASE + 0x0190)
-#define PCIBRI_AHBBAR1 (PKUNITY_PCIBRI_BASE + 0x0194)
-#define PCIBRI_AHBAMR1 (PKUNITY_PCIBRI_BASE + 0x0198)
-#define PCIBRI_AHBTAR1 (PKUNITY_PCIBRI_BASE + 0x019C)
-#define PCIBRI_AHBCTL2 (PKUNITY_PCIBRI_BASE + 0x01A0)
-#define PCIBRI_AHBBAR2 (PKUNITY_PCIBRI_BASE + 0x01A4)
-#define PCIBRI_AHBAMR2 (PKUNITY_PCIBRI_BASE + 0x01A8)
-#define PCIBRI_AHBTAR2 (PKUNITY_PCIBRI_BASE + 0x01AC)
-#define PCIBRI_AHBCTL3 (PKUNITY_PCIBRI_BASE + 0x01B0)
-#define PCIBRI_AHBBAR3 (PKUNITY_PCIBRI_BASE + 0x01B4)
-#define PCIBRI_AHBAMR3 (PKUNITY_PCIBRI_BASE + 0x01B8)
-#define PCIBRI_AHBTAR3 (PKUNITY_PCIBRI_BASE + 0x01BC)
-#define PCIBRI_AHBCTL4 (PKUNITY_PCIBRI_BASE + 0x01C0)
-#define PCIBRI_AHBBAR4 (PKUNITY_PCIBRI_BASE + 0x01C4)
-#define PCIBRI_AHBAMR4 (PKUNITY_PCIBRI_BASE + 0x01C8)
-#define PCIBRI_AHBTAR4 (PKUNITY_PCIBRI_BASE + 0x01CC)
-#define PCIBRI_AHBCTL5 (PKUNITY_PCIBRI_BASE + 0x01D0)
-#define PCIBRI_AHBBAR5 (PKUNITY_PCIBRI_BASE + 0x01D4)
-#define PCIBRI_AHBAMR5 (PKUNITY_PCIBRI_BASE + 0x01D8)
-#define PCIBRI_AHBTAR5 (PKUNITY_PCIBRI_BASE + 0x01DC)
-
-#define PCIBRI_CTLx_AT FIELD(1, 1, 2)
-#define PCIBRI_CTLx_PREF FIELD(1, 1, 1)
-#define PCIBRI_CTLx_MRL FIELD(1, 1, 0)
-
-#define PCIBRI_BARx_ADDR FIELD(0xFFFFFFFC, 30, 2)
-#define PCIBRI_BARx_IO FIELD(1, 1, 0)
-#define PCIBRI_BARx_MEM FIELD(0, 1, 0)
-
-#define PCIBRI_CMD_IO FIELD(1, 1, 0)
-#define PCIBRI_CMD_MEM FIELD(1, 1, 1)
diff --git a/arch/unicore32/include/mach/regs-pm.h b/arch/unicore32/include/mach/regs-pm.h
deleted file mode 100644
index 777b1ace39b9..000000000000
--- a/arch/unicore32/include/mach/regs-pm.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUNITY Power Manager (PM) Registers
- */
-/*
- * PM Control Reg PM_PMCR
- */
-#define PM_PMCR (PKUNITY_PM_BASE + 0x0000)
-/*
- * PM General Conf. Reg PM_PGCR
- */
-#define PM_PGCR (PKUNITY_PM_BASE + 0x0004)
-/*
- * PM PLL Conf. Reg PM_PPCR
- */
-#define PM_PPCR (PKUNITY_PM_BASE + 0x0008)
-/*
- * PM Wakeup Enable Reg PM_PWER
- */
-#define PM_PWER (PKUNITY_PM_BASE + 0x000C)
-/*
- * PM GPIO Sleep Status Reg PM_PGSR
- */
-#define PM_PGSR (PKUNITY_PM_BASE + 0x0010)
-/*
- * PM Clock Gate Reg PM_PCGR
- */
-#define PM_PCGR (PKUNITY_PM_BASE + 0x0014)
-/*
- * PM SYS PLL Conf. Reg PM_PLLSYSCFG
- */
-#define PM_PLLSYSCFG (PKUNITY_PM_BASE + 0x0018)
-/*
- * PM DDR PLL Conf. Reg PM_PLLDDRCFG
- */
-#define PM_PLLDDRCFG (PKUNITY_PM_BASE + 0x001C)
-/*
- * PM VGA PLL Conf. Reg PM_PLLVGACFG
- */
-#define PM_PLLVGACFG (PKUNITY_PM_BASE + 0x0020)
-/*
- * PM Div Conf. Reg PM_DIVCFG
- */
-#define PM_DIVCFG (PKUNITY_PM_BASE + 0x0024)
-/*
- * PM SYS PLL Status Reg PM_PLLSYSSTATUS
- */
-#define PM_PLLSYSSTATUS (PKUNITY_PM_BASE + 0x0028)
-/*
- * PM DDR PLL Status Reg PM_PLLDDRSTATUS
- */
-#define PM_PLLDDRSTATUS (PKUNITY_PM_BASE + 0x002C)
-/*
- * PM VGA PLL Status Reg PM_PLLVGASTATUS
- */
-#define PM_PLLVGASTATUS (PKUNITY_PM_BASE + 0x0030)
-/*
- * PM Div Status Reg PM_DIVSTATUS
- */
-#define PM_DIVSTATUS (PKUNITY_PM_BASE + 0x0034)
-/*
- * PM Software Reset Reg PM_SWRESET
- */
-#define PM_SWRESET (PKUNITY_PM_BASE + 0x0038)
-/*
- * PM DDR2 PAD Start Reg PM_DDR2START
- */
-#define PM_DDR2START (PKUNITY_PM_BASE + 0x003C)
-/*
- * PM DDR2 PAD Status Reg PM_DDR2CAL0
- */
-#define PM_DDR2CAL0 (PKUNITY_PM_BASE + 0x0040)
-/*
- * PM PLL DFC Done Reg PM_PLLDFCDONE
- */
-#define PM_PLLDFCDONE (PKUNITY_PM_BASE + 0x0044)
-
-#define PM_PMCR_SFB FIELD(1, 1, 0)
-#define PM_PMCR_IFB FIELD(1, 1, 1)
-#define PM_PMCR_CFBSYS FIELD(1, 1, 2)
-#define PM_PMCR_CFBDDR FIELD(1, 1, 3)
-#define PM_PMCR_CFBVGA FIELD(1, 1, 4)
-#define PM_PMCR_CFBDIVBCLK FIELD(1, 1, 5)
-
-/*
- * GPIO 8~27 wake-up enable PM_PWER_GPIOHIGH
- */
-#define PM_PWER_GPIOHIGH FIELD(1, 1, 8)
-/*
- * RTC alarm wake-up enable PM_PWER_RTC
- */
-#define PM_PWER_RTC FIELD(1, 1, 31)
-
-#define PM_PCGR_BCLK64DDR FIELD(1, 1, 0)
-#define PM_PCGR_BCLK64VGA FIELD(1, 1, 1)
-#define PM_PCGR_BCLKDDR FIELD(1, 1, 2)
-#define PM_PCGR_BCLKPCI FIELD(1, 1, 4)
-#define PM_PCGR_BCLKDMAC FIELD(1, 1, 5)
-#define PM_PCGR_BCLKUMAL FIELD(1, 1, 6)
-#define PM_PCGR_BCLKUSB FIELD(1, 1, 7)
-#define PM_PCGR_BCLKMME FIELD(1, 1, 10)
-#define PM_PCGR_BCLKNAND FIELD(1, 1, 11)
-#define PM_PCGR_BCLKH264E FIELD(1, 1, 12)
-#define PM_PCGR_BCLKVGA FIELD(1, 1, 13)
-#define PM_PCGR_BCLKH264D FIELD(1, 1, 14)
-#define PM_PCGR_VECLK FIELD(1, 1, 15)
-#define PM_PCGR_HECLK FIELD(1, 1, 16)
-#define PM_PCGR_HDCLK FIELD(1, 1, 17)
-#define PM_PCGR_NANDCLK FIELD(1, 1, 18)
-#define PM_PCGR_GECLK FIELD(1, 1, 19)
-#define PM_PCGR_VGACLK FIELD(1, 1, 20)
-#define PM_PCGR_PCICLK FIELD(1, 1, 21)
-#define PM_PCGR_SATACLK FIELD(1, 1, 25)
-
-/*
- * [23:20]PM_DIVCFG_VGACLK(v)
- */
-#define PM_DIVCFG_VGACLK_MASK FMASK(4, 20)
-#define PM_DIVCFG_VGACLK(v) FIELD((v), 4, 20)
-
-#define PM_SWRESET_USB FIELD(1, 1, 6)
-#define PM_SWRESET_VGADIV FIELD(1, 1, 26)
-#define PM_SWRESET_GEDIV FIELD(1, 1, 27)
-
-#define PM_PLLDFCDONE_SYSDFC FIELD(1, 1, 0)
-#define PM_PLLDFCDONE_DDRDFC FIELD(1, 1, 1)
-#define PM_PLLDFCDONE_VGADFC FIELD(1, 1, 2)
diff --git a/arch/unicore32/include/mach/regs-ps2.h b/arch/unicore32/include/mach/regs-ps2.h
deleted file mode 100644
index d539d7482462..000000000000
--- a/arch/unicore32/include/mach/regs-ps2.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity PS2 Controller Registers
- */
-/*
- * the same as I8042_DATA_REG PS2_DATA
- */
-#define PS2_DATA (PKUNITY_PS2_BASE + 0x0060)
-/*
- * the same as I8042_COMMAND_REG PS2_COMMAND
- */
-#define PS2_COMMAND (PKUNITY_PS2_BASE + 0x0064)
-/*
- * the same as I8042_STATUS_REG PS2_STATUS
- */
-#define PS2_STATUS (PKUNITY_PS2_BASE + 0x0064)
-/*
- * counter reg PS2_CNT
- */
-#define PS2_CNT (PKUNITY_PS2_BASE + 0x0068)
-
diff --git a/arch/unicore32/include/mach/regs-resetc.h b/arch/unicore32/include/mach/regs-resetc.h
deleted file mode 100644
index 5f2b9d77a9ec..000000000000
--- a/arch/unicore32/include/mach/regs-resetc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Reset Controller (RC) Registers
- */
-/*
- * Software Reset Register
- */
-#define RESETC_SWRR (PKUNITY_RESETC_BASE + 0x0000)
-/*
- * Reset Status Register
- */
-#define RESETC_RSSR (PKUNITY_RESETC_BASE + 0x0004)
-
-/*
- * Software Reset Bit
- */
-#define RESETC_SWRR_SRB FIELD(1, 1, 0)
-
-/*
- * Hardware Reset
- */
-#define RESETC_RSSR_HWR FIELD(1, 1, 0)
-/*
- * Software Reset
- */
-#define RESETC_RSSR_SWR FIELD(1, 1, 1)
-/*
- * Watchdog Reset
- */
-#define RESETC_RSSR_WDR FIELD(1, 1, 2)
-/*
- * Sleep Mode Reset
- */
-#define RESETC_RSSR_SMR FIELD(1, 1, 3)
-
diff --git a/arch/unicore32/include/mach/regs-rtc.h b/arch/unicore32/include/mach/regs-rtc.h
deleted file mode 100644
index f2f7f47eb65e..000000000000
--- a/arch/unicore32/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Real-Time Clock (RTC) control registers
- */
-/*
- * RTC Alarm Reg RTC_RTAR
- */
-#define RTC_RTAR (PKUNITY_RTC_BASE + 0x0000)
-/*
- * RTC Count Reg RTC_RCNR
- */
-#define RTC_RCNR (PKUNITY_RTC_BASE + 0x0004)
-/*
- * RTC Trim Reg RTC_RTTR
- */
-#define RTC_RTTR (PKUNITY_RTC_BASE + 0x0008)
-/*
- * RTC Status Reg RTC_RTSR
- */
-#define RTC_RTSR (PKUNITY_RTC_BASE + 0x0010)
-
-/*
- * ALarm detected RTC_RTSR_AL
- */
-#define RTC_RTSR_AL FIELD(1, 1, 0)
-/*
- * 1 Hz clock detected RTC_RTSR_HZ
- */
-#define RTC_RTSR_HZ FIELD(1, 1, 1)
-/*
- * ALarm interrupt Enable RTC_RTSR_ALE
- */
-#define RTC_RTSR_ALE FIELD(1, 1, 2)
-/*
- * 1 Hz clock interrupt Enable RTC_RTSR_HZE
- */
-#define RTC_RTSR_HZE FIELD(1, 1, 3)
-
diff --git a/arch/unicore32/include/mach/regs-sdc.h b/arch/unicore32/include/mach/regs-sdc.h
deleted file mode 100644
index 658bfaf4cb3c..000000000000
--- a/arch/unicore32/include/mach/regs-sdc.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Multi-Media Card and Security Digital Card (MMC/SD) Registers
- */
-/*
- * Clock Control Reg SDC_CCR
- */
-#define SDC_CCR (PKUNITY_SDC_BASE + 0x0000)
-/*
- * Software Reset Reg SDC_SRR
- */
-#define SDC_SRR (PKUNITY_SDC_BASE + 0x0004)
-/*
- * Argument Reg SDC_ARGUMENT
- */
-#define SDC_ARGUMENT (PKUNITY_SDC_BASE + 0x0008)
-/*
- * Command Reg SDC_COMMAND
- */
-#define SDC_COMMAND (PKUNITY_SDC_BASE + 0x000C)
-/*
- * Block Size Reg SDC_BLOCKSIZE
- */
-#define SDC_BLOCKSIZE (PKUNITY_SDC_BASE + 0x0010)
-/*
- * Block Cound Reg SDC_BLOCKCOUNT
- */
-#define SDC_BLOCKCOUNT (PKUNITY_SDC_BASE + 0x0014)
-/*
- * Transfer Mode Reg SDC_TMR
- */
-#define SDC_TMR (PKUNITY_SDC_BASE + 0x0018)
-/*
- * Response Reg. 0 SDC_RES0
- */
-#define SDC_RES0 (PKUNITY_SDC_BASE + 0x001C)
-/*
- * Response Reg. 1 SDC_RES1
- */
-#define SDC_RES1 (PKUNITY_SDC_BASE + 0x0020)
-/*
- * Response Reg. 2 SDC_RES2
- */
-#define SDC_RES2 (PKUNITY_SDC_BASE + 0x0024)
-/*
- * Response Reg. 3 SDC_RES3
- */
-#define SDC_RES3 (PKUNITY_SDC_BASE + 0x0028)
-/*
- * Read Timeout Control Reg SDC_RTCR
- */
-#define SDC_RTCR (PKUNITY_SDC_BASE + 0x002C)
-/*
- * Interrupt Status Reg SDC_ISR
- */
-#define SDC_ISR (PKUNITY_SDC_BASE + 0x0030)
-/*
- * Interrupt Status Mask Reg SDC_ISMR
- */
-#define SDC_ISMR (PKUNITY_SDC_BASE + 0x0034)
-/*
- * RX FIFO SDC_RXFIFO
- */
-#define SDC_RXFIFO (PKUNITY_SDC_BASE + 0x0038)
-/*
- * TX FIFO SDC_TXFIFO
- */
-#define SDC_TXFIFO (PKUNITY_SDC_BASE + 0x003C)
-
-/*
- * SD Clock Enable SDC_CCR_CLKEN
- */
-#define SDC_CCR_CLKEN FIELD(1, 1, 2)
-/*
- * [15:8] SDC_CCR_PDIV(v)
- */
-#define SDC_CCR_PDIV(v) FIELD((v), 8, 8)
-
-/*
- * Software reset enable SDC_SRR_ENABLE
- */
-#define SDC_SRR_ENABLE FIELD(0, 1, 0)
-/*
- * Software reset disable SDC_SRR_DISABLE
- */
-#define SDC_SRR_DISABLE FIELD(1, 1, 0)
-
-/*
- * Response type SDC_COMMAND_RESTYPE_MASK
- */
-#define SDC_COMMAND_RESTYPE_MASK FMASK(2, 0)
-/*
- * No response SDC_COMMAND_RESTYPE_NONE
- */
-#define SDC_COMMAND_RESTYPE_NONE FIELD(0, 2, 0)
-/*
- * 136-bit long response SDC_COMMAND_RESTYPE_LONG
- */
-#define SDC_COMMAND_RESTYPE_LONG FIELD(1, 2, 0)
-/*
- * 48-bit short response SDC_COMMAND_RESTYPE_SHORT
- */
-#define SDC_COMMAND_RESTYPE_SHORT FIELD(2, 2, 0)
-/*
- * 48-bit short and test if busy response SDC_COMMAND_RESTYPE_SHORTBUSY
- */
-#define SDC_COMMAND_RESTYPE_SHORTBUSY FIELD(3, 2, 0)
-/*
- * data ready SDC_COMMAND_DATAREADY
- */
-#define SDC_COMMAND_DATAREADY FIELD(1, 1, 2)
-#define SDC_COMMAND_CMDEN FIELD(1, 1, 3)
-/*
- * [10:5] SDC_COMMAND_CMDINDEX(v)
- */
-#define SDC_COMMAND_CMDINDEX(v) FIELD((v), 6, 5)
-
-/*
- * [10:0] SDC_BLOCKSIZE_BSMASK(v)
- */
-#define SDC_BLOCKSIZE_BSMASK(v) FIELD((v), 11, 0)
-/*
- * [11:0] SDC_BLOCKCOUNT_BCMASK(v)
- */
-#define SDC_BLOCKCOUNT_BCMASK(v) FIELD((v), 12, 0)
-
-/*
- * Data Width 1bit SDC_TMR_WTH_1BIT
- */
-#define SDC_TMR_WTH_1BIT FIELD(0, 1, 0)
-/*
- * Data Width 4bit SDC_TMR_WTH_4BIT
- */
-#define SDC_TMR_WTH_4BIT FIELD(1, 1, 0)
-/*
- * Read SDC_TMR_DIR_READ
- */
-#define SDC_TMR_DIR_READ FIELD(0, 1, 1)
-/*
- * Write SDC_TMR_DIR_WRITE
- */
-#define SDC_TMR_DIR_WRITE FIELD(1, 1, 1)
-
-#define SDC_IR_MASK FMASK(13, 0)
-#define SDC_IR_RESTIMEOUT FIELD(1, 1, 0)
-#define SDC_IR_WRITECRC FIELD(1, 1, 1)
-#define SDC_IR_READCRC FIELD(1, 1, 2)
-#define SDC_IR_TXFIFOREAD FIELD(1, 1, 3)
-#define SDC_IR_RXFIFOWRITE FIELD(1, 1, 4)
-#define SDC_IR_READTIMEOUT FIELD(1, 1, 5)
-#define SDC_IR_DATACOMPLETE FIELD(1, 1, 6)
-#define SDC_IR_CMDCOMPLETE FIELD(1, 1, 7)
-#define SDC_IR_RXFIFOFULL FIELD(1, 1, 8)
-#define SDC_IR_RXFIFOEMPTY FIELD(1, 1, 9)
-#define SDC_IR_TXFIFOFULL FIELD(1, 1, 10)
-#define SDC_IR_TXFIFOEMPTY FIELD(1, 1, 11)
-#define SDC_IR_ENDCMDWITHRES FIELD(1, 1, 12)
diff --git a/arch/unicore32/include/mach/regs-spi.h b/arch/unicore32/include/mach/regs-spi.h
deleted file mode 100644
index 3460647a9c2a..000000000000
--- a/arch/unicore32/include/mach/regs-spi.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Serial Peripheral Interface (SPI) Registers
- */
-/*
- * Control reg. 0 SPI_CR0
- */
-#define SPI_CR0 (PKUNITY_SPI_BASE + 0x0000)
-/*
- * Control reg. 1 SPI_CR1
- */
-#define SPI_CR1 (PKUNITY_SPI_BASE + 0x0004)
-/*
- * Enable reg SPI_SSIENR
- */
-#define SPI_SSIENR (PKUNITY_SPI_BASE + 0x0008)
-/*
- * Status reg SPI_SR
- */
-#define SPI_SR (PKUNITY_SPI_BASE + 0x0028)
-/*
- * Interrupt Mask reg SPI_IMR
- */
-#define SPI_IMR (PKUNITY_SPI_BASE + 0x002C)
-/*
- * Interrupt Status reg SPI_ISR
- */
-#define SPI_ISR (PKUNITY_SPI_BASE + 0x0030)
-
-/*
- * Enable SPI Controller SPI_SSIENR_EN
- */
-#define SPI_SSIENR_EN FIELD(1, 1, 0)
-
-/*
- * SPI Busy SPI_SR_BUSY
- */
-#define SPI_SR_BUSY FIELD(1, 1, 0)
-/*
- * Transmit FIFO Not Full SPI_SR_TFNF
- */
-#define SPI_SR_TFNF FIELD(1, 1, 1)
-/*
- * Transmit FIFO Empty SPI_SR_TFE
- */
-#define SPI_SR_TFE FIELD(1, 1, 2)
-/*
- * Receive FIFO Not Empty SPI_SR_RFNE
- */
-#define SPI_SR_RFNE FIELD(1, 1, 3)
-/*
- * Receive FIFO Full SPI_SR_RFF
- */
-#define SPI_SR_RFF FIELD(1, 1, 4)
-
-/*
- * Trans. FIFO Empty Interrupt Status SPI_ISR_TXEIS
- */
-#define SPI_ISR_TXEIS FIELD(1, 1, 0)
-/*
- * Trans. FIFO Overflow Interrupt Status SPI_ISR_TXOIS
- */
-#define SPI_ISR_TXOIS FIELD(1, 1, 1)
-/*
- * Receiv. FIFO Underflow Interrupt Status SPI_ISR_RXUIS
- */
-#define SPI_ISR_RXUIS FIELD(1, 1, 2)
-/*
- * Receiv. FIFO Overflow Interrupt Status SPI_ISR_RXOIS
- */
-#define SPI_ISR_RXOIS FIELD(1, 1, 3)
-/*
- * Receiv. FIFO Full Interrupt Status SPI_ISR_RXFIS
- */
-#define SPI_ISR_RXFIS FIELD(1, 1, 4)
-#define SPI_ISR_MSTIS FIELD(1, 1, 5)
-
-/*
- * Trans. FIFO Empty Interrupt Mask SPI_IMR_TXEIM
- */
-#define SPI_IMR_TXEIM FIELD(1, 1, 0)
-/*
- * Trans. FIFO Overflow Interrupt Mask SPI_IMR_TXOIM
- */
-#define SPI_IMR_TXOIM FIELD(1, 1, 1)
-/*
- * Receiv. FIFO Underflow Interrupt Mask SPI_IMR_RXUIM
- */
-#define SPI_IMR_RXUIM FIELD(1, 1, 2)
-/*
- * Receiv. FIFO Overflow Interrupt Mask SPI_IMR_RXOIM
- */
-#define SPI_IMR_RXOIM FIELD(1, 1, 3)
-/*
- * Receiv. FIFO Full Interrupt Mask SPI_IMR_RXFIM
- */
-#define SPI_IMR_RXFIM FIELD(1, 1, 4)
-#define SPI_IMR_MSTIM FIELD(1, 1, 5)
-
diff --git a/arch/unicore32/include/mach/regs-uart.h b/arch/unicore32/include/mach/regs-uart.h
deleted file mode 100644
index 9fa6b1938b77..000000000000
--- a/arch/unicore32/include/mach/regs-uart.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * PKUnity Universal Asynchronous Receiver/Transmitter (UART) Registers
- */
diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h
deleted file mode 100644
index 7023089c61c6..000000000000
--- a/arch/unicore32/include/mach/regs-umal.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Ultra Media Access Layer (UMAL) Ethernet MAC Registers
- */
-
-/* MAC module of UMAL */
-/* UMAL's MAC module includes G/MII interface, several additional PHY
- * interfaces, and MAC control sub-layer, which provides support for control
- * frames (e.g. PAUSE frames).
- */
-/*
- * TX/RX reset and control UMAL_CFG1
- */
-#define UMAL_CFG1 (PKUNITY_UMAL_BASE + 0x0000)
-/*
- * MAC interface mode control UMAL_CFG2
- */
-#define UMAL_CFG2 (PKUNITY_UMAL_BASE + 0x0004)
-/*
- * Inter Packet/Frame Gap UMAL_IPGIFG
- */
-#define UMAL_IPGIFG (PKUNITY_UMAL_BASE + 0x0008)
-/*
- * Collision retry or backoff UMAL_HALFDUPLEX
- */
-#define UMAL_HALFDUPLEX (PKUNITY_UMAL_BASE + 0x000c)
-/*
- * Maximum Frame Length UMAL_MAXFRAME
- */
-#define UMAL_MAXFRAME (PKUNITY_UMAL_BASE + 0x0010)
-/*
- * Test Regsiter UMAL_TESTREG
- */
-#define UMAL_TESTREG (PKUNITY_UMAL_BASE + 0x001c)
-/*
- * MII Management Configure UMAL_MIICFG
- */
-#define UMAL_MIICFG (PKUNITY_UMAL_BASE + 0x0020)
-/*
- * MII Management Command UMAL_MIICMD
- */
-#define UMAL_MIICMD (PKUNITY_UMAL_BASE + 0x0024)
-/*
- * MII Management Address UMAL_MIIADDR
- */
-#define UMAL_MIIADDR (PKUNITY_UMAL_BASE + 0x0028)
-/*
- * MII Management Control UMAL_MIICTRL
- */
-#define UMAL_MIICTRL (PKUNITY_UMAL_BASE + 0x002c)
-/*
- * MII Management Status UMAL_MIISTATUS
- */
-#define UMAL_MIISTATUS (PKUNITY_UMAL_BASE + 0x0030)
-/*
- * MII Management Indicator UMAL_MIIIDCT
- */
-#define UMAL_MIIIDCT (PKUNITY_UMAL_BASE + 0x0034)
-/*
- * Interface Control UMAL_IFCTRL
- */
-#define UMAL_IFCTRL (PKUNITY_UMAL_BASE + 0x0038)
-/*
- * Interface Status UMAL_IFSTATUS
- */
-#define UMAL_IFSTATUS (PKUNITY_UMAL_BASE + 0x003c)
-/*
- * MAC address (high 4 bytes) UMAL_STADDR1
- */
-#define UMAL_STADDR1 (PKUNITY_UMAL_BASE + 0x0040)
-/*
- * MAC address (low 2 bytes) UMAL_STADDR2
- */
-#define UMAL_STADDR2 (PKUNITY_UMAL_BASE + 0x0044)
-
-/* FIFO MODULE OF UMAL */
-/* UMAL's FIFO module provides data queuing for increased system level
- * throughput
- */
-#define UMAL_FIFOCFG0 (PKUNITY_UMAL_BASE + 0x0048)
-#define UMAL_FIFOCFG1 (PKUNITY_UMAL_BASE + 0x004c)
-#define UMAL_FIFOCFG2 (PKUNITY_UMAL_BASE + 0x0050)
-#define UMAL_FIFOCFG3 (PKUNITY_UMAL_BASE + 0x0054)
-#define UMAL_FIFOCFG4 (PKUNITY_UMAL_BASE + 0x0058)
-#define UMAL_FIFOCFG5 (PKUNITY_UMAL_BASE + 0x005c)
-#define UMAL_FIFORAM0 (PKUNITY_UMAL_BASE + 0x0060)
-#define UMAL_FIFORAM1 (PKUNITY_UMAL_BASE + 0x0064)
-#define UMAL_FIFORAM2 (PKUNITY_UMAL_BASE + 0x0068)
-#define UMAL_FIFORAM3 (PKUNITY_UMAL_BASE + 0x006c)
-#define UMAL_FIFORAM4 (PKUNITY_UMAL_BASE + 0x0070)
-#define UMAL_FIFORAM5 (PKUNITY_UMAL_BASE + 0x0074)
-#define UMAL_FIFORAM6 (PKUNITY_UMAL_BASE + 0x0078)
-#define UMAL_FIFORAM7 (PKUNITY_UMAL_BASE + 0x007c)
-
-/* MAHBE MODULE OF UMAL */
-/* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master
- * and Slave ports.Registers within the M-AHBE provide Control and Status
- * information concerning these transfers.
- */
-/*
- * Transmit Control UMAL_DMATxCtrl
- */
-#define UMAL_DMATxCtrl (PKUNITY_UMAL_BASE + 0x0180)
-/*
- * Pointer to TX Descripter UMAL_DMATxDescriptor
- */
-#define UMAL_DMATxDescriptor (PKUNITY_UMAL_BASE + 0x0184)
-/*
- * Status of Tx Packet Transfers UMAL_DMATxStatus
- */
-#define UMAL_DMATxStatus (PKUNITY_UMAL_BASE + 0x0188)
-/*
- * Receive Control UMAL_DMARxCtrl
- */
-#define UMAL_DMARxCtrl (PKUNITY_UMAL_BASE + 0x018c)
-/*
- * Pointer to Rx Descriptor UMAL_DMARxDescriptor
- */
-#define UMAL_DMARxDescriptor (PKUNITY_UMAL_BASE + 0x0190)
-/*
- * Status of Rx Packet Transfers UMAL_DMARxStatus
- */
-#define UMAL_DMARxStatus (PKUNITY_UMAL_BASE + 0x0194)
-/*
- * Interrupt Mask UMAL_DMAIntrMask
- */
-#define UMAL_DMAIntrMask (PKUNITY_UMAL_BASE + 0x0198)
-/*
- * Interrupts, read only UMAL_DMAInterrupt
- */
-#define UMAL_DMAInterrupt (PKUNITY_UMAL_BASE + 0x019c)
-
-/*
- * Commands for UMAL_CFG1 register
- */
-#define UMAL_CFG1_TXENABLE FIELD(1, 1, 0)
-#define UMAL_CFG1_RXENABLE FIELD(1, 1, 2)
-#define UMAL_CFG1_TXFLOWCTL FIELD(1, 1, 4)
-#define UMAL_CFG1_RXFLOWCTL FIELD(1, 1, 5)
-#define UMAL_CFG1_CONFLPBK FIELD(1, 1, 8)
-#define UMAL_CFG1_RESET FIELD(1, 1, 31)
-#define UMAL_CFG1_CONFFLCTL (MAC_TX_FLOW_CTL | MAC_RX_FLOW_CTL)
-
-/*
- * Commands for UMAL_CFG2 register
- */
-#define UMAL_CFG2_FULLDUPLEX FIELD(1, 1, 0)
-#define UMAL_CFG2_CRCENABLE FIELD(1, 1, 1)
-#define UMAL_CFG2_PADCRC FIELD(1, 1, 2)
-#define UMAL_CFG2_LENGTHCHECK FIELD(1, 1, 4)
-#define UMAL_CFG2_MODEMASK FMASK(2, 8)
-#define UMAL_CFG2_NIBBLEMODE FIELD(1, 2, 8)
-#define UMAL_CFG2_BYTEMODE FIELD(2, 2, 8)
-#define UMAL_CFG2_PREAMBLENMASK FMASK(4, 12)
-#define UMAL_CFG2_DEFPREAMBLEN FIELD(7, 4, 12)
-#define UMAL_CFG2_FD100 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
- | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
- | UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
-#define UMAL_CFG2_FD1000 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_BYTEMODE \
- | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
- | UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
-#define UMAL_CFG2_HD100 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
- | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
- | UMAL_CFG2_CRCENABLE)
-
-/*
- * Command for UMAL_IFCTRL register
- */
-#define UMAL_IFCTRL_RESET FIELD(1, 1, 31)
-
-/*
- * Command for UMAL_MIICFG register
- */
-#define UMAL_MIICFG_RESET FIELD(1, 1, 31)
-
-/*
- * Command for UMAL_MIICMD register
- */
-#define UMAL_MIICMD_READ FIELD(1, 1, 0)
-
-/*
- * Command for UMAL_MIIIDCT register
- */
-#define UMAL_MIIIDCT_BUSY FIELD(1, 1, 0)
-#define UMAL_MIIIDCT_NOTVALID FIELD(1, 1, 2)
-
-/*
- * Commands for DMATxCtrl regesters
- */
-#define UMAL_DMA_Enable FIELD(1, 1, 0)
-
-/*
- * Commands for DMARxCtrl regesters
- */
-#define UMAL_DMAIntrMask_ENABLEHALFWORD FIELD(1, 1, 16)
-
-/*
- * Command for DMARxStatus
- */
-#define CLR_RX_BUS_ERR FIELD(1, 1, 3)
-#define CLR_RX_OVERFLOW FIELD(1, 1, 2)
-#define CLR_RX_PKT FIELD(1, 1, 0)
-
-/*
- * Command for DMATxStatus
- */
-#define CLR_TX_BUS_ERR FIELD(1, 1, 3)
-#define CLR_TX_UNDERRUN FIELD(1, 1, 1)
-#define CLR_TX_PKT FIELD(1, 1, 0)
-
-/*
- * Commands for DMAIntrMask and DMAInterrupt register
- */
-#define INT_RX_MASK FIELD(0xd, 4, 4)
-#define INT_TX_MASK FIELD(0xb, 4, 0)
-
-#define INT_RX_BUS_ERR FIELD(1, 1, 7)
-#define INT_RX_OVERFLOW FIELD(1, 1, 6)
-#define INT_RX_PKT FIELD(1, 1, 4)
-#define INT_TX_BUS_ERR FIELD(1, 1, 3)
-#define INT_TX_UNDERRUN FIELD(1, 1, 1)
-#define INT_TX_PKT FIELD(1, 1, 0)
-
-/*
- * MARCOS of UMAL's descriptors
- */
-#define UMAL_DESC_PACKETSIZE_EMPTY FIELD(1, 1, 31)
-#define UMAL_DESC_PACKETSIZE_NONEMPTY FIELD(0, 1, 31)
-#define UMAL_DESC_PACKETSIZE_SIZEMASK FMASK(12, 0)
-
diff --git a/arch/unicore32/include/mach/regs-unigfx.h b/arch/unicore32/include/mach/regs-unigfx.h
deleted file mode 100644
index 553d1157c6b2..000000000000
--- a/arch/unicore32/include/mach/regs-unigfx.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity UNIGFX Registers
- */
-
-#define UDE_BASE (PKUNITY_UNIGFX_BASE + 0x1400)
-#define UGE_BASE (PKUNITY_UNIGFX_BASE + 0x0000)
-
-/*
- * command reg for UNIGFX DE
- */
-/*
- * control reg UDE_CFG
- */
-#define UDE_CFG (UDE_BASE + 0x0000)
-/*
- * framebuffer start address reg UDE_FSA
- */
-#define UDE_FSA (UDE_BASE + 0x0004)
-/*
- * line size reg UDE_LS
- */
-#define UDE_LS (UDE_BASE + 0x0008)
-/*
- * pitch size reg UDE_PS
- */
-#define UDE_PS (UDE_BASE + 0x000C)
-/*
- * horizontal active time reg UDE_HAT
- */
-#define UDE_HAT (UDE_BASE + 0x0010)
-/*
- * horizontal blank time reg UDE_HBT
- */
-#define UDE_HBT (UDE_BASE + 0x0014)
-/*
- * horizontal sync time reg UDE_HST
- */
-#define UDE_HST (UDE_BASE + 0x0018)
-/*
- * vertival active time reg UDE_VAT
- */
-#define UDE_VAT (UDE_BASE + 0x001C)
-/*
- * vertival blank time reg UDE_VBT
- */
-#define UDE_VBT (UDE_BASE + 0x0020)
-/*
- * vertival sync time reg UDE_VST
- */
-#define UDE_VST (UDE_BASE + 0x0024)
-/*
- * cursor position UDE_CXY
- */
-#define UDE_CXY (UDE_BASE + 0x0028)
-/*
- * cursor front color UDE_CC0
- */
-#define UDE_CC0 (UDE_BASE + 0x002C)
-/*
- * cursor background color UDE_CC1
- */
-#define UDE_CC1 (UDE_BASE + 0x0030)
-/*
- * video position UDE_VXY
- */
-#define UDE_VXY (UDE_BASE + 0x0034)
-/*
- * video start address reg UDE_VSA
- */
-#define UDE_VSA (UDE_BASE + 0x0040)
-/*
- * video size reg UDE_VS
- */
-#define UDE_VS (UDE_BASE + 0x004C)
-
-/*
- * command reg for UNIGFX GE
- */
-/*
- * src xy reg UGE_SRCXY
- */
-#define UGE_SRCXY (UGE_BASE + 0x0000)
-/*
- * dst xy reg UGE_DSTXY
- */
-#define UGE_DSTXY (UGE_BASE + 0x0004)
-/*
- * pitch reg UGE_PITCH
- */
-#define UGE_PITCH (UGE_BASE + 0x0008)
-/*
- * src start reg UGE_SRCSTART
- */
-#define UGE_SRCSTART (UGE_BASE + 0x000C)
-/*
- * dst start reg UGE_DSTSTART
- */
-#define UGE_DSTSTART (UGE_BASE + 0x0010)
-/*
- * width height reg UGE_WIDHEIGHT
- */
-#define UGE_WIDHEIGHT (UGE_BASE + 0x0014)
-/*
- * rop alpah reg UGE_ROPALPHA
- */
-#define UGE_ROPALPHA (UGE_BASE + 0x0018)
-/*
- * front color UGE_FCOLOR
- */
-#define UGE_FCOLOR (UGE_BASE + 0x001C)
-/*
- * background color UGE_BCOLOR
- */
-#define UGE_BCOLOR (UGE_BASE + 0x0020)
-/*
- * src color key for high value UGE_SCH
- */
-#define UGE_SCH (UGE_BASE + 0x0024)
-/*
- * dst color key for high value UGE_DCH
- */
-#define UGE_DCH (UGE_BASE + 0x0028)
-/*
- * src color key for low value UGE_SCL
- */
-#define UGE_SCL (UGE_BASE + 0x002C)
-/*
- * dst color key for low value UGE_DCL
- */
-#define UGE_DCL (UGE_BASE + 0x0030)
-/*
- * clip 0 reg UGE_CLIP0
- */
-#define UGE_CLIP0 (UGE_BASE + 0x0034)
-/*
- * clip 1 reg UGE_CLIP1
- */
-#define UGE_CLIP1 (UGE_BASE + 0x0038)
-/*
- * command reg UGE_COMMAND
- */
-#define UGE_COMMAND (UGE_BASE + 0x003C)
-/*
- * pattern 0 UGE_P0
- */
-#define UGE_P0 (UGE_BASE + 0x0040)
-#define UGE_P1 (UGE_BASE + 0x0044)
-#define UGE_P2 (UGE_BASE + 0x0048)
-#define UGE_P3 (UGE_BASE + 0x004C)
-#define UGE_P4 (UGE_BASE + 0x0050)
-#define UGE_P5 (UGE_BASE + 0x0054)
-#define UGE_P6 (UGE_BASE + 0x0058)
-#define UGE_P7 (UGE_BASE + 0x005C)
-#define UGE_P8 (UGE_BASE + 0x0060)
-#define UGE_P9 (UGE_BASE + 0x0064)
-#define UGE_P10 (UGE_BASE + 0x0068)
-#define UGE_P11 (UGE_BASE + 0x006C)
-#define UGE_P12 (UGE_BASE + 0x0070)
-#define UGE_P13 (UGE_BASE + 0x0074)
-#define UGE_P14 (UGE_BASE + 0x0078)
-#define UGE_P15 (UGE_BASE + 0x007C)
-#define UGE_P16 (UGE_BASE + 0x0080)
-#define UGE_P17 (UGE_BASE + 0x0084)
-#define UGE_P18 (UGE_BASE + 0x0088)
-#define UGE_P19 (UGE_BASE + 0x008C)
-#define UGE_P20 (UGE_BASE + 0x0090)
-#define UGE_P21 (UGE_BASE + 0x0094)
-#define UGE_P22 (UGE_BASE + 0x0098)
-#define UGE_P23 (UGE_BASE + 0x009C)
-#define UGE_P24 (UGE_BASE + 0x00A0)
-#define UGE_P25 (UGE_BASE + 0x00A4)
-#define UGE_P26 (UGE_BASE + 0x00A8)
-#define UGE_P27 (UGE_BASE + 0x00AC)
-#define UGE_P28 (UGE_BASE + 0x00B0)
-#define UGE_P29 (UGE_BASE + 0x00B4)
-#define UGE_P30 (UGE_BASE + 0x00B8)
-#define UGE_P31 (UGE_BASE + 0x00BC)
-
-#define UDE_CFG_DST_MASK FMASK(2, 8)
-#define UDE_CFG_DST8 FIELD(0x0, 2, 8)
-#define UDE_CFG_DST16 FIELD(0x1, 2, 8)
-#define UDE_CFG_DST24 FIELD(0x2, 2, 8)
-#define UDE_CFG_DST32 FIELD(0x3, 2, 8)
-
-/*
- * GDEN enable UDE_CFG_GDEN_ENABLE
- */
-#define UDE_CFG_GDEN_ENABLE FIELD(1, 1, 3)
-/*
- * VDEN enable UDE_CFG_VDEN_ENABLE
- */
-#define UDE_CFG_VDEN_ENABLE FIELD(1, 1, 4)
-/*
- * CDEN enable UDE_CFG_CDEN_ENABLE
- */
-#define UDE_CFG_CDEN_ENABLE FIELD(1, 1, 5)
-/*
- * TIMEUP enable UDE_CFG_TIMEUP_ENABLE
- */
-#define UDE_CFG_TIMEUP_ENABLE FIELD(1, 1, 6)
diff --git a/arch/unicore32/include/mach/uncompress.h b/arch/unicore32/include/mach/uncompress.h
deleted file mode 100644
index 0c1a56a1913f..000000000000
--- a/arch/unicore32/include/mach/uncompress.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/uncompress.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __MACH_PUV3_UNCOMPRESS_H__
-#define __MACH_PUV3_UNCOMPRESS_H__
-
-#include <mach/hardware.h>
-#include <mach/ocd.h>
-
-extern char input_data[];
-extern char input_data_end[];
-
-static void arch_decomp_puts(const char *ptr)
-{
- char c;
-
- while ((c = *ptr++) != '\0') {
- if (c == '\n')
- putc('\r');
- putc(c);
- }
-}
-#define ARCH_HAVE_DECOMP_PUTS
-
-#endif /* __MACH_PUV3_UNCOMPRESS_H__ */
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
deleted file mode 100644
index e78470141932..000000000000
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generic-y += ucontext.h
diff --git a/arch/unicore32/include/uapi/asm/byteorder.h b/arch/unicore32/include/uapi/asm/byteorder.h
deleted file mode 100644
index 864fe4814cf4..000000000000
--- a/arch/unicore32/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/byteorder.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * UniCore ONLY support Little Endian mode, the data bus is connected such
- * that byte accesses appear as:
- * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- * d0...d31
- */
-#ifndef __UNICORE_BYTEORDER_H__
-#define __UNICORE_BYTEORDER_H__
-
-#include <linux/byteorder/little_endian.h>
-
-#endif
-
diff --git a/arch/unicore32/include/uapi/asm/ptrace.h b/arch/unicore32/include/uapi/asm/ptrace.h
deleted file mode 100644
index 2820de83e37d..000000000000
--- a/arch/unicore32/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/ptrace.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _UAPI__UNICORE_PTRACE_H__
-#define _UAPI__UNICORE_PTRACE_H__
-
-#define PTRACE_GET_THREAD_AREA 22
-
-/*
- * PSR bits
- */
-#define USER_MODE 0x00000010
-#define REAL_MODE 0x00000011
-#define INTR_MODE 0x00000012
-#define PRIV_MODE 0x00000013
-#define ABRT_MODE 0x00000017
-#define EXTN_MODE 0x0000001b
-#define SUSR_MODE 0x0000001f
-#define MODE_MASK 0x0000001f
-#define PSR_R_BIT 0x00000040
-#define PSR_I_BIT 0x00000080
-#define PSR_V_BIT 0x10000000
-#define PSR_C_BIT 0x20000000
-#define PSR_Z_BIT 0x40000000
-#define PSR_S_BIT 0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f 0xff000000 /* Flags */
-#define PSR_c 0x000000ff /* Control */
-
-#ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call. Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-struct pt_regs {
- unsigned long uregs[34];
-};
-
-#define UCreg_asr uregs[32]
-#define UCreg_pc uregs[31]
-#define UCreg_lr uregs[30]
-#define UCreg_sp uregs[29]
-#define UCreg_ip uregs[28]
-#define UCreg_fp uregs[27]
-#define UCreg_26 uregs[26]
-#define UCreg_25 uregs[25]
-#define UCreg_24 uregs[24]
-#define UCreg_23 uregs[23]
-#define UCreg_22 uregs[22]
-#define UCreg_21 uregs[21]
-#define UCreg_20 uregs[20]
-#define UCreg_19 uregs[19]
-#define UCreg_18 uregs[18]
-#define UCreg_17 uregs[17]
-#define UCreg_16 uregs[16]
-#define UCreg_15 uregs[15]
-#define UCreg_14 uregs[14]
-#define UCreg_13 uregs[13]
-#define UCreg_12 uregs[12]
-#define UCreg_11 uregs[11]
-#define UCreg_10 uregs[10]
-#define UCreg_09 uregs[9]
-#define UCreg_08 uregs[8]
-#define UCreg_07 uregs[7]
-#define UCreg_06 uregs[6]
-#define UCreg_05 uregs[5]
-#define UCreg_04 uregs[4]
-#define UCreg_03 uregs[3]
-#define UCreg_02 uregs[2]
-#define UCreg_01 uregs[1]
-#define UCreg_00 uregs[0]
-#define UCreg_ORIG_00 uregs[33]
-
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _UAPI__UNICORE_PTRACE_H__ */
diff --git a/arch/unicore32/include/uapi/asm/sigcontext.h b/arch/unicore32/include/uapi/asm/sigcontext.h
deleted file mode 100644
index 79e56f28e4b5..000000000000
--- a/arch/unicore32/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/sigcontext.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __UNICORE_SIGCONTEXT_H__
-#define __UNICORE_SIGCONTEXT_H__
-
-#include <asm/ptrace.h>
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked. Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
- unsigned long trap_no;
- unsigned long error_code;
- unsigned long oldmask;
- unsigned long fault_address;
- struct pt_regs regs;
-};
-
-#endif
diff --git a/arch/unicore32/include/uapi/asm/unistd.h b/arch/unicore32/include/uapi/asm/unistd.h
deleted file mode 100644
index 54a7378a70b1..000000000000
--- a/arch/unicore32/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/unistd.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define __ARCH_WANT_RENAMEAT
-#define __ARCH_WANT_SET_GET_RLIMIT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_TIME32_SYSCALLS
-
-/* Use the standard ABI for syscalls. */
-#include <asm-generic/unistd.h>
-#define __ARCH_WANT_SYS_CLONE
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
deleted file mode 100644
index 2f79aa56735b..000000000000
--- a/arch/unicore32/kernel/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y := dma.o elf.o entry.o process.o ptrace.o
-obj-y += setup.o signal.o sys.o stacktrace.o traps.o
-
-obj-$(CONFIG_MODULES) += ksyms.o module.o
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o
-
-# obj-y for architecture PKUnity v3
-obj-$(CONFIG_ARCH_PUV3) += clock.o irq.o time.o
-
-obj-$(CONFIG_PUV3_GPIO) += gpio.o
-obj-$(CONFIG_PUV3_PM) += pm.o sleep.o
-obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate_asm.o
-
-obj-$(CONFIG_PCI) += pci.o
-
-# obj-y for specific machines
-obj-$(CONFIG_ARCH_PUV3) += puv3-core.o
-obj-$(CONFIG_PUV3_NB0916) += puv3-nb0916.o
-
-head-y := head.o
-obj-$(CONFIG_DEBUG_LL) += debug.o
-
-extra-y := $(head-y) vmlinux.lds
diff --git a/arch/unicore32/kernel/asm-offsets.c b/arch/unicore32/kernel/asm-offsets.c
deleted file mode 100644
index f7d672267549..000000000000
--- a/arch/unicore32/kernel/asm-offsets.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/asm-offsets.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/kbuild.h>
-#include <linux/suspend.h>
-#include <linux/thread_info.h>
-#include <asm/memory.h>
-#include <asm/suspend.h>
-
-/*
- * GCC 3.0, 3.1: general bad code generation.
- * GCC 3.2.0: incorrect function argument offset calculation.
- * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
- * (http://gcc.gnu.org/PR8896) and incorrect structure
- * initialisation in fs/jffs2/erase.c
- */
-#if (__GNUC__ < 4)
-#error Your compiler should upgrade to uc4
-#error Known good compilers: 4.2.2
-#endif
-
-int main(void)
-{
- DEFINE(TSK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
- BLANK();
- DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
- DEFINE(TI_TASK, offsetof(struct thread_info, task));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
- DEFINE(TI_CPU_SAVE, offsetof(struct thread_info, cpu_context));
- DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp));
-#ifdef CONFIG_UNICORE_FPU_F64
- DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate));
-#endif
- BLANK();
- DEFINE(S_R0, offsetof(struct pt_regs, UCreg_00));
- DEFINE(S_R1, offsetof(struct pt_regs, UCreg_01));
- DEFINE(S_R2, offsetof(struct pt_regs, UCreg_02));
- DEFINE(S_R3, offsetof(struct pt_regs, UCreg_03));
- DEFINE(S_R4, offsetof(struct pt_regs, UCreg_04));
- DEFINE(S_R5, offsetof(struct pt_regs, UCreg_05));
- DEFINE(S_R6, offsetof(struct pt_regs, UCreg_06));
- DEFINE(S_R7, offsetof(struct pt_regs, UCreg_07));
- DEFINE(S_R8, offsetof(struct pt_regs, UCreg_08));
- DEFINE(S_R9, offsetof(struct pt_regs, UCreg_09));
- DEFINE(S_R10, offsetof(struct pt_regs, UCreg_10));
- DEFINE(S_R11, offsetof(struct pt_regs, UCreg_11));
- DEFINE(S_R12, offsetof(struct pt_regs, UCreg_12));
- DEFINE(S_R13, offsetof(struct pt_regs, UCreg_13));
- DEFINE(S_R14, offsetof(struct pt_regs, UCreg_14));
- DEFINE(S_R15, offsetof(struct pt_regs, UCreg_15));
- DEFINE(S_R16, offsetof(struct pt_regs, UCreg_16));
- DEFINE(S_R17, offsetof(struct pt_regs, UCreg_17));
- DEFINE(S_R18, offsetof(struct pt_regs, UCreg_18));
- DEFINE(S_R19, offsetof(struct pt_regs, UCreg_19));
- DEFINE(S_R20, offsetof(struct pt_regs, UCreg_20));
- DEFINE(S_R21, offsetof(struct pt_regs, UCreg_21));
- DEFINE(S_R22, offsetof(struct pt_regs, UCreg_22));
- DEFINE(S_R23, offsetof(struct pt_regs, UCreg_23));
- DEFINE(S_R24, offsetof(struct pt_regs, UCreg_24));
- DEFINE(S_R25, offsetof(struct pt_regs, UCreg_25));
- DEFINE(S_R26, offsetof(struct pt_regs, UCreg_26));
- DEFINE(S_FP, offsetof(struct pt_regs, UCreg_fp));
- DEFINE(S_IP, offsetof(struct pt_regs, UCreg_ip));
- DEFINE(S_SP, offsetof(struct pt_regs, UCreg_sp));
- DEFINE(S_LR, offsetof(struct pt_regs, UCreg_lr));
- DEFINE(S_PC, offsetof(struct pt_regs, UCreg_pc));
- DEFINE(S_PSR, offsetof(struct pt_regs, UCreg_asr));
- DEFINE(S_OLD_R0, offsetof(struct pt_regs, UCreg_ORIG_00));
- DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
- BLANK();
- DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm));
- DEFINE(VMA_VM_FLAGS, offsetof(struct vm_area_struct, vm_flags));
- BLANK();
- DEFINE(VM_EXEC, VM_EXEC);
- BLANK();
- DEFINE(PAGE_SZ, PAGE_SIZE);
- BLANK();
- DEFINE(SYS_ERROR0, 0x9f0000);
- BLANK();
- DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
- DEFINE(PBE_ORIN_ADDRESS, offsetof(struct pbe, orig_address));
- DEFINE(PBE_NEXT, offsetof(struct pbe, next));
- DEFINE(SWSUSP_CPU, offsetof(struct swsusp_arch_regs, \
- cpu_context));
-#ifdef CONFIG_UNICORE_FPU_F64
- DEFINE(SWSUSP_FPSTATE, offsetof(struct swsusp_arch_regs, \
- fpstate));
-#endif
- BLANK();
- DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
- DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
- DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
- return 0;
-}
diff --git a/arch/unicore32/kernel/clock.c b/arch/unicore32/kernel/clock.c
deleted file mode 100644
index 41df6be0a3b2..000000000000
--- a/arch/unicore32/kernel/clock.c
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/clock.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple clock implementation
- */
-struct clk {
- struct list_head node;
- unsigned long rate;
- const char *name;
-};
-
-static struct clk clk_ost_clk = {
- .name = "OST_CLK",
- .rate = CLOCK_TICK_RATE,
-};
-
-static struct clk clk_mclk_clk = {
- .name = "MAIN_CLK",
-};
-
-static struct clk clk_bclk32_clk = {
- .name = "BUS32_CLK",
-};
-
-static struct clk clk_ddr_clk = {
- .name = "DDR_CLK",
-};
-
-static struct clk clk_vga_clk = {
- .name = "VGA_CLK",
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
-
- mutex_lock(&clocks_mutex);
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0) {
- clk = p;
- break;
- }
- }
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-struct {
- unsigned long rate;
- unsigned long cfg;
- unsigned long div;
-} vga_clk_table[] = {
- {.rate = 25175000, .cfg = 0x00002001, .div = 0x9},
- {.rate = 31500000, .cfg = 0x00002001, .div = 0x7},
- {.rate = 40000000, .cfg = 0x00003801, .div = 0x9},
- {.rate = 49500000, .cfg = 0x00003801, .div = 0x7},
- {.rate = 65000000, .cfg = 0x00002c01, .div = 0x4},
- {.rate = 78750000, .cfg = 0x00002400, .div = 0x7},
- {.rate = 108000000, .cfg = 0x00002c01, .div = 0x2},
- {.rate = 106500000, .cfg = 0x00003c01, .div = 0x3},
- {.rate = 50650000, .cfg = 0x00106400, .div = 0x9},
- {.rate = 61500000, .cfg = 0x00106400, .div = 0xa},
- {.rate = 85500000, .cfg = 0x00002800, .div = 0x6},
-};
-
-struct {
- unsigned long mrate;
- unsigned long prate;
-} mclk_clk_table[] = {
- {.mrate = 500000000, .prate = 0x00109801},
- {.mrate = 525000000, .prate = 0x00104C00},
- {.mrate = 550000000, .prate = 0x00105000},
- {.mrate = 575000000, .prate = 0x00105400},
- {.mrate = 600000000, .prate = 0x00105800},
- {.mrate = 625000000, .prate = 0x00105C00},
- {.mrate = 650000000, .prate = 0x00106000},
- {.mrate = 675000000, .prate = 0x00106400},
- {.mrate = 700000000, .prate = 0x00106800},
- {.mrate = 725000000, .prate = 0x00106C00},
- {.mrate = 750000000, .prate = 0x00107000},
- {.mrate = 775000000, .prate = 0x00107400},
- {.mrate = 800000000, .prate = 0x00107800},
-};
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- if (clk == &clk_vga_clk) {
- unsigned long pll_vgacfg, pll_vgadiv;
- int ret, i;
-
- /* lookup vga_clk_table */
- ret = -EINVAL;
- for (i = 0; i < ARRAY_SIZE(vga_clk_table); i++) {
- if (rate == vga_clk_table[i].rate) {
- pll_vgacfg = vga_clk_table[i].cfg;
- pll_vgadiv = vga_clk_table[i].div;
- ret = 0;
- break;
- }
- }
-
- if (ret)
- return ret;
-
- if (readl(PM_PLLVGACFG) == pll_vgacfg)
- return 0;
-
- /* set pll vga cfg reg. */
- writel(pll_vgacfg, PM_PLLVGACFG);
-
- writel(PM_PMCR_CFBVGA, PM_PMCR);
- while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_VGADFC)
- != PM_PLLDFCDONE_VGADFC)
- udelay(100); /* about 1ms */
-
- /* set div cfg reg. */
- writel(readl(PM_PCGR) | PM_PCGR_VGACLK, PM_PCGR);
-
- writel((readl(PM_DIVCFG) & ~PM_DIVCFG_VGACLK_MASK)
- | PM_DIVCFG_VGACLK(pll_vgadiv), PM_DIVCFG);
-
- writel(readl(PM_SWRESET) | PM_SWRESET_VGADIV, PM_SWRESET);
- while ((readl(PM_SWRESET) & PM_SWRESET_VGADIV)
- == PM_SWRESET_VGADIV)
- udelay(100); /* 65536 bclk32, about 320us */
-
- writel(readl(PM_PCGR) & ~PM_PCGR_VGACLK, PM_PCGR);
- }
-#ifdef CONFIG_CPU_FREQ
- if (clk == &clk_mclk_clk) {
- u32 pll_rate, divstatus = readl(PM_DIVSTATUS);
- int ret, i;
-
- /* lookup mclk_clk_table */
- ret = -EINVAL;
- for (i = 0; i < ARRAY_SIZE(mclk_clk_table); i++) {
- if (rate == mclk_clk_table[i].mrate) {
- pll_rate = mclk_clk_table[i].prate;
- clk_mclk_clk.rate = mclk_clk_table[i].mrate;
- ret = 0;
- break;
- }
- }
-
- if (ret)
- return ret;
-
- if (clk_mclk_clk.rate)
- clk_bclk32_clk.rate = clk_mclk_clk.rate
- / (((divstatus & 0x0000f000) >> 12) + 1);
-
- /* set pll sys cfg reg. */
- writel(pll_rate, PM_PLLSYSCFG);
-
- writel(PM_PMCR_CFBSYS, PM_PMCR);
- while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_SYSDFC)
- != PM_PLLDFCDONE_SYSDFC)
- udelay(100);
- /* about 1ms */
- }
-#endif
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_register(struct clk *clk)
-{
- mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
- mutex_unlock(&clocks_mutex);
- printk(KERN_DEFAULT "PKUnity PM: %s %lu.%02luM\n", clk->name,
- (clk->rate)/1000000, (clk->rate)/10000 % 100);
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- mutex_lock(&clocks_mutex);
- list_del(&clk->node);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-struct {
- unsigned long prate;
- unsigned long rate;
-} pllrate_table[] = {
- {.prate = 0x00002001, .rate = 250000000},
- {.prate = 0x00104801, .rate = 250000000},
- {.prate = 0x00104C01, .rate = 262500000},
- {.prate = 0x00002401, .rate = 275000000},
- {.prate = 0x00105001, .rate = 275000000},
- {.prate = 0x00105401, .rate = 287500000},
- {.prate = 0x00002801, .rate = 300000000},
- {.prate = 0x00105801, .rate = 300000000},
- {.prate = 0x00105C01, .rate = 312500000},
- {.prate = 0x00002C01, .rate = 325000000},
- {.prate = 0x00106001, .rate = 325000000},
- {.prate = 0x00106401, .rate = 337500000},
- {.prate = 0x00003001, .rate = 350000000},
- {.prate = 0x00106801, .rate = 350000000},
- {.prate = 0x00106C01, .rate = 362500000},
- {.prate = 0x00003401, .rate = 375000000},
- {.prate = 0x00107001, .rate = 375000000},
- {.prate = 0x00107401, .rate = 387500000},
- {.prate = 0x00003801, .rate = 400000000},
- {.prate = 0x00107801, .rate = 400000000},
- {.prate = 0x00107C01, .rate = 412500000},
- {.prate = 0x00003C01, .rate = 425000000},
- {.prate = 0x00108001, .rate = 425000000},
- {.prate = 0x00108401, .rate = 437500000},
- {.prate = 0x00004001, .rate = 450000000},
- {.prate = 0x00108801, .rate = 450000000},
- {.prate = 0x00108C01, .rate = 462500000},
- {.prate = 0x00004401, .rate = 475000000},
- {.prate = 0x00109001, .rate = 475000000},
- {.prate = 0x00109401, .rate = 487500000},
- {.prate = 0x00004801, .rate = 500000000},
- {.prate = 0x00109801, .rate = 500000000},
- {.prate = 0x00104C00, .rate = 525000000},
- {.prate = 0x00002400, .rate = 550000000},
- {.prate = 0x00105000, .rate = 550000000},
- {.prate = 0x00105400, .rate = 575000000},
- {.prate = 0x00002800, .rate = 600000000},
- {.prate = 0x00105800, .rate = 600000000},
- {.prate = 0x00105C00, .rate = 625000000},
- {.prate = 0x00002C00, .rate = 650000000},
- {.prate = 0x00106000, .rate = 650000000},
- {.prate = 0x00106400, .rate = 675000000},
- {.prate = 0x00003000, .rate = 700000000},
- {.prate = 0x00106800, .rate = 700000000},
- {.prate = 0x00106C00, .rate = 725000000},
- {.prate = 0x00003400, .rate = 750000000},
- {.prate = 0x00107000, .rate = 750000000},
- {.prate = 0x00107400, .rate = 775000000},
- {.prate = 0x00003800, .rate = 800000000},
- {.prate = 0x00107800, .rate = 800000000},
- {.prate = 0x00107C00, .rate = 825000000},
- {.prate = 0x00003C00, .rate = 850000000},
- {.prate = 0x00108000, .rate = 850000000},
- {.prate = 0x00108400, .rate = 875000000},
- {.prate = 0x00004000, .rate = 900000000},
- {.prate = 0x00108800, .rate = 900000000},
- {.prate = 0x00108C00, .rate = 925000000},
- {.prate = 0x00004400, .rate = 950000000},
- {.prate = 0x00109000, .rate = 950000000},
- {.prate = 0x00109400, .rate = 975000000},
- {.prate = 0x00004800, .rate = 1000000000},
- {.prate = 0x00109800, .rate = 1000000000},
-};
-
-struct {
- unsigned long prate;
- unsigned long drate;
-} pddr_table[] = {
- {.prate = 0x00100800, .drate = 44236800},
- {.prate = 0x00100C00, .drate = 66355200},
- {.prate = 0x00101000, .drate = 88473600},
- {.prate = 0x00101400, .drate = 110592000},
- {.prate = 0x00101800, .drate = 132710400},
- {.prate = 0x00101C01, .drate = 154828800},
- {.prate = 0x00102001, .drate = 176947200},
- {.prate = 0x00102401, .drate = 199065600},
- {.prate = 0x00102801, .drate = 221184000},
- {.prate = 0x00102C01, .drate = 243302400},
- {.prate = 0x00103001, .drate = 265420800},
- {.prate = 0x00103401, .drate = 287539200},
- {.prate = 0x00103801, .drate = 309657600},
- {.prate = 0x00103C01, .drate = 331776000},
- {.prate = 0x00104001, .drate = 353894400},
-};
-
-static int __init clk_init(void)
-{
-#ifdef CONFIG_PUV3_PM
- u32 pllrate, divstatus = readl(PM_DIVSTATUS);
- u32 pcgr_val = readl(PM_PCGR);
- int i;
-
- pcgr_val |= PM_PCGR_BCLKMME | PM_PCGR_BCLKH264E | PM_PCGR_BCLKH264D
- | PM_PCGR_HECLK | PM_PCGR_HDCLK;
- writel(pcgr_val, PM_PCGR);
-
- pllrate = readl(PM_PLLSYSSTATUS);
-
- /* lookup pmclk_table */
- clk_mclk_clk.rate = 0;
- for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
- if (pllrate == pllrate_table[i].prate) {
- clk_mclk_clk.rate = pllrate_table[i].rate;
- break;
- }
- }
-
- if (clk_mclk_clk.rate)
- clk_bclk32_clk.rate = clk_mclk_clk.rate /
- (((divstatus & 0x0000f000) >> 12) + 1);
-
- pllrate = readl(PM_PLLDDRSTATUS);
-
- /* lookup pddr_table */
- clk_ddr_clk.rate = 0;
- for (i = 0; i < ARRAY_SIZE(pddr_table); i++) {
- if (pllrate == pddr_table[i].prate) {
- clk_ddr_clk.rate = pddr_table[i].drate;
- break;
- }
- }
-
- pllrate = readl(PM_PLLVGASTATUS);
-
- /* lookup pvga_table */
- clk_vga_clk.rate = 0;
- for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
- if (pllrate == pllrate_table[i].prate) {
- clk_vga_clk.rate = pllrate_table[i].rate;
- break;
- }
- }
-
- if (clk_vga_clk.rate)
- clk_vga_clk.rate = clk_vga_clk.rate /
- (((divstatus & 0x00f00000) >> 20) + 1);
-
- clk_register(&clk_vga_clk);
-#endif
-#ifdef CONFIG_ARCH_FPGA
- clk_ddr_clk.rate = 33000000;
- clk_mclk_clk.rate = 33000000;
- clk_bclk32_clk.rate = 33000000;
-#endif
- clk_register(&clk_ddr_clk);
- clk_register(&clk_mclk_clk);
- clk_register(&clk_bclk32_clk);
- clk_register(&clk_ost_clk);
- return 0;
-}
-core_initcall(clk_init);
diff --git a/arch/unicore32/kernel/debug-macro.S b/arch/unicore32/kernel/debug-macro.S
deleted file mode 100644
index 7e2da0de4f71..000000000000
--- a/arch/unicore32/kernel/debug-macro.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/debug-macro.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Debugging macro include header
- */
-#include <generated/asm-offsets.h>
-#include <mach/hardware.h>
-
- .macro put_word_ocd, rd, rx=r16
-1001: movc \rx, p1.c0, #0
- cand.a \rx, #2
- bne 1001b
- movc p1.c1, \rd, #1
- .endm
-
-#ifdef CONFIG_DEBUG_OCD
- /* debug using UniCore On-Chip-Debugger */
- .macro addruart, rx
- .endm
-
- .macro senduart, rd, rx
- put_word_ocd \rd, \rx
- .endm
-
- .macro busyuart, rd, rx
- .endm
-
- .macro waituart, rd, rx
- .endm
-#else
-#define UART_CLK_DEFAULT 3686400 * 20
- /* Uartclk = MCLK/ 2, The MCLK on my board is 3686400 * 40 */
-#define BAUD_RATE_DEFAULT 115200
- /* The baud rate of the serial port */
-
-#define UART_DIVISOR_DEFAULT (UART_CLK_DEFAULT \
- / (16 * BAUD_RATE_DEFAULT) - 1)
-
- .macro addruart,rx
- mrc p0, #0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xee000000 @ physical base address
- movne \rx, #0x6e000000 @ virtual address
-
- @ We probe for the active serial port here
- @ However, now we assume UART0 is active: epip4d
- @ We assume r1 and r2 can be clobbered.
-
- movl r2, #UART_DIVISOR_DEFAULT
- mov r1, #0x80
- str r1, [\rx, #UART_LCR_OFFSET]
- and r1, r2, #0xff00
- mov r1, r1, lsr #8
- str r1, [\rx, #UART_DLH_OFFSET]
- and r1, r2, #0xff
- str r1, [\rx, #UART_DLL_OFFSET]
- mov r1, #0x7
- str r1, [\rx, #UART_FCR_OFFSET]
- mov r1, #0x3
- str r1, [\rx, #UART_LCR_OFFSET]
- mov r1, #0x0
- str r1, [\rx, #UART_IER_OFFSET]
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #UART_THR_OFFSET]
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #UART_LSR_OFFSET]
- tst \rd, #UART_LSR_THRE
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #UART_LSR_OFFSET]
- tst \rd, #UART_LSR_TEMT
- bne 1001b
- .endm
-#endif
-
diff --git a/arch/unicore32/kernel/debug.S b/arch/unicore32/kernel/debug.S
deleted file mode 100644
index 13bc8c8550e4..000000000000
--- a/arch/unicore32/kernel/debug.S
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/debug.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * 32-bit debugging code
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
- .text
-
-/*
- * Some debugging routines (useful if you've got MM problems and
- * printk isn't working). For DEBUGGING ONLY!!! Do not leave
- * references to these in a production kernel!
- */
-#include "debug-macro.S"
-
-/*
- * Useful debugging routines
- */
-ENTRY(printhex8)
- mov r1, #8
- b printhex
-ENDPROC(printhex8)
-
-ENTRY(printhex4)
- mov r1, #4
- b printhex
-ENDPROC(printhex4)
-
-ENTRY(printhex2)
- mov r1, #2
-printhex: adr r2, hexbuf
- add r3, r2, r1
- mov r1, #0
- stb r1, [r3]
-1: and r1, r0, #15
- mov r0, r0 >> #4
- csub.a r1, #10
- beg 2f
- add r1, r1, #'0' - 'a' + 10
-2: add r1, r1, #'a' - 10
- stb.w r1, [r3+], #-1
- cxor.a r3, r2
- bne 1b
- mov r0, r2
- b printascii
-ENDPROC(printhex2)
-
- .ltorg
-
-ENTRY(printascii)
- addruart r3
- b 2f
-1: waituart r2, r3
- senduart r1, r3
- busyuart r2, r3
- cxor.a r1, #'\n'
- cmoveq r1, #'\r'
- beq 1b
-2: cxor.a r0, #0
- beq 3f
- ldb.w r1, [r0]+, #1
- cxor.a r1, #0
- bne 1b
-3: mov pc, lr
-ENDPROC(printascii)
-
-ENTRY(printch)
- addruart r3
- mov r1, r0
- mov r0, #0
- b 1b
-ENDPROC(printch)
-
-hexbuf: .space 16
-
diff --git a/arch/unicore32/kernel/dma.c b/arch/unicore32/kernel/dma.c
deleted file mode 100644
index 7a0e2d4d6077..000000000000
--- a/arch/unicore32/kernel/dma.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/dma.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-struct dma_channel {
- char *name;
- puv3_dma_prio prio;
- void (*irq_handler)(int, void *);
- void (*err_handler)(int, void *);
- void *data;
-};
-
-static struct dma_channel dma_channels[MAX_DMA_CHANNELS];
-
-int puv3_request_dma(char *name, puv3_dma_prio prio,
- void (*irq_handler)(int, void *),
- void (*err_handler)(int, void *),
- void *data)
-{
- unsigned long flags;
- int i, found = 0;
-
- /* basic sanity checks */
- if (!name)
- return -EINVAL;
-
- local_irq_save(flags);
-
- do {
- /* try grabbing a DMA channel with the requested priority */
- for (i = 0; i < MAX_DMA_CHANNELS; i++) {
- if ((dma_channels[i].prio == prio) &&
- !dma_channels[i].name) {
- found = 1;
- break;
- }
- }
- /* if requested prio group is full, try a hier priority */
- } while (!found && prio--);
-
- if (found) {
- dma_channels[i].name = name;
- dma_channels[i].irq_handler = irq_handler;
- dma_channels[i].err_handler = err_handler;
- dma_channels[i].data = data;
- } else {
- printk(KERN_WARNING "No more available DMA channels for %s\n",
- name);
- i = -ENODEV;
- }
-
- local_irq_restore(flags);
- return i;
-}
-EXPORT_SYMBOL(puv3_request_dma);
-
-void puv3_free_dma(int dma_ch)
-{
- unsigned long flags;
-
- if (!dma_channels[dma_ch].name) {
- printk(KERN_CRIT
- "%s: trying to free channel %d which is already freed\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- dma_channels[dma_ch].name = NULL;
- dma_channels[dma_ch].err_handler = NULL;
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(puv3_free_dma);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- int i, dint;
-
- dint = readl(DMAC_ITCSR);
- for (i = 0; i < MAX_DMA_CHANNELS; i++) {
- if (dint & DMAC_CHANNEL(i)) {
- struct dma_channel *channel = &dma_channels[i];
-
- /* Clear TC interrupt of channel i */
- writel(DMAC_CHANNEL(i), DMAC_ITCCR);
- writel(0, DMAC_ITCCR);
-
- if (channel->name && channel->irq_handler) {
- channel->irq_handler(i, channel->data);
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk(KERN_WARNING "spurious IRQ for"
- " DMA channel %d\n", i);
- }
- }
- }
- return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
- int i, dint;
-
- dint = readl(DMAC_IESR);
- for (i = 0; i < MAX_DMA_CHANNELS; i++) {
- if (dint & DMAC_CHANNEL(i)) {
- struct dma_channel *channel = &dma_channels[i];
-
- /* Clear Err interrupt of channel i */
- writel(DMAC_CHANNEL(i), DMAC_IECR);
- writel(0, DMAC_IECR);
-
- if (channel->name && channel->err_handler) {
- channel->err_handler(i, channel->data);
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk(KERN_WARNING "spurious IRQ for"
- " DMA channel %d\n", i);
- }
- }
- }
- return IRQ_HANDLED;
-}
-
-int __init puv3_init_dma(void)
-{
- int i, ret;
-
- /* dma channel priorities on v8 processors:
- * ch 0 - 1 <--> (0) DMA_PRIO_HIGH
- * ch 2 - 3 <--> (1) DMA_PRIO_MEDIUM
- * ch 4 - 5 <--> (2) DMA_PRIO_LOW
- */
- for (i = 0; i < MAX_DMA_CHANNELS; i++) {
- puv3_stop_dma(i);
- dma_channels[i].name = NULL;
- dma_channels[i].prio = min((i & 0x7) >> 1, DMA_PRIO_LOW);
- }
-
- ret = request_irq(IRQ_DMA, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Can't register IRQ for DMA\n");
- return ret;
- }
-
- ret = request_irq(IRQ_DMAERR, dma_err_handler, 0, "DMAERR", NULL);
- if (ret) {
- printk(KERN_CRIT "Can't register IRQ for DMAERR\n");
- free_irq(IRQ_DMA, "DMA");
- return ret;
- }
-
- return 0;
-}
-
-postcore_initcall(puv3_init_dma);
diff --git a/arch/unicore32/kernel/early_printk.c b/arch/unicore32/kernel/early_printk.c
deleted file mode 100644
index c00b6712b8f7..000000000000
--- a/arch/unicore32/kernel/early_printk.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/early_printk.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <mach/ocd.h>
-
-/* On-Chip-Debugger functions */
-
-static void early_ocd_write(struct console *con, const char *s, unsigned n)
-{
- while (*s && n-- > 0) {
- if (*s == '\n')
- ocd_putc((int)'\r');
- ocd_putc((int)*s);
- s++;
- }
-}
-
-static struct console early_ocd_console = {
- .name = "earlyocd",
- .write = early_ocd_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init setup_early_printk(char *buf)
-{
- if (!buf || early_console)
- return 0;
-
- early_console = &early_ocd_console;
- if (strstr(buf, "keep"))
- early_console->flags &= ~CON_BOOT;
- else
- early_console->flags |= CON_BOOT;
- register_console(early_console);
- return 0;
-}
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/unicore32/kernel/elf.c b/arch/unicore32/kernel/elf.c
deleted file mode 100644
index 22adc65a03e9..000000000000
--- a/arch/unicore32/kernel/elf.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/elf.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/elf.h>
-
-int elf_check_arch(const struct elf32_hdr *x)
-{
- /* Make sure it's an UniCore executable */
- if (x->e_machine != EM_UNICORE)
- return 0;
-
- /* Make sure the entry address is reasonable */
- if (x->e_entry & 3)
- return 0;
-
- return 1;
-}
-EXPORT_SYMBOL(elf_check_arch);
-
-void elf_set_personality(const struct elf32_hdr *x)
-{
- unsigned int personality = PER_LINUX;
-
- set_personality(personality);
-}
-EXPORT_SYMBOL(elf_set_personality);
diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S
deleted file mode 100644
index b35dc83069cb..000000000000
--- a/arch/unicore32/kernel/entry.S
+++ /dev/null
@@ -1,802 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/entry.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Low-level vector interface routines
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/unistd.h>
-#include <generated/asm-offsets.h>
-#include "debug-macro.S"
-
-@
-@ Most of the stack format comes from struct pt_regs, but with
-@ the addition of 8 bytes for storing syscall args 5 and 6.
-@
-#define S_OFF 8
-
-/*
- * The SWI code relies on the fact that R0 is at the bottom of the stack
- * (due to slow/fast restore user regs).
- */
-#if S_R0 != 0
-#error "Please fix"
-#endif
-
- .macro zero_fp
-#ifdef CONFIG_FRAME_POINTER
- mov fp, #0
-#endif
- .endm
-
- .macro alignment_trap, rtemp
-#ifdef CONFIG_ALIGNMENT_TRAP
- ldw \rtemp, .LCcralign
- ldw \rtemp, [\rtemp]
- movc p0.c1, \rtemp, #0
-#endif
- .endm
-
- .macro load_user_sp_lr, rd, rtemp, offset = 0
- mov \rtemp, asr
- xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
- mov.a asr, \rtemp @ switch to the SUSR mode
-
- ldw sp, [\rd+], #\offset @ load sp_user
- ldw lr, [\rd+], #\offset + 4 @ load lr_user
-
- xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
- mov.a asr, \rtemp @ switch back to the PRIV mode
- .endm
-
- .macro priv_exit, rpsr
- mov.a bsr, \rpsr
- ldm.w (r0 - r15), [sp]+
- ldm.b (r16 - pc), [sp]+ @ load r0 - pc, asr
- .endm
-
- .macro restore_user_regs, fast = 0, offset = 0
- ldw r1, [sp+], #\offset + S_PSR @ get calling asr
- ldw lr, [sp+], #\offset + S_PC @ get pc
- mov.a bsr, r1 @ save in bsr_priv
- .if \fast
- add sp, sp, #\offset + S_R1 @ r0 is syscall return value
- ldm.w (r1 - r15), [sp]+ @ get calling r1 - r15
- ldur (r16 - lr), [sp]+ @ get calling r16 - lr
- .else
- ldm.w (r0 - r15), [sp]+ @ get calling r0 - r15
- ldur (r16 - lr), [sp]+ @ get calling r16 - lr
- .endif
- nop
- add sp, sp, #S_FRAME_SIZE - S_R16
- mov.a pc, lr @ return
- @ and move bsr_priv into asr
- .endm
-
- .macro get_thread_info, rd
- mov \rd, sp >> #13
- mov \rd, \rd << #13
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldw \base, =(PKUNITY_INTC_BASE)
- ldw \irqstat, [\base+], #0xC @ INTC_ICIP
- ldw \tmp, [\base+], #0x4 @ INTC_ICMR
- and.a \irqstat, \irqstat, \tmp
- beq 1001f
- cntlz \irqnr, \irqstat
- rsub \irqnr, \irqnr, #31
-1001: /* EQ will be set if no irqs pending */
- .endm
-
-#ifdef CONFIG_DEBUG_LL
- .macro printreg, reg, temp
- adr \temp, 901f
- stm (r0-r3), [\temp]+
- stw lr, [\temp+], #0x10
- mov r0, \reg
- b.l printhex8
- mov r0, #':'
- b.l printch
- mov r0, pc
- b.l printhex8
- adr r0, 902f
- b.l printascii
- adr \temp, 901f
- ldm (r0-r3), [\temp]+
- ldw lr, [\temp+], #0x10
- b 903f
-901: .word 0, 0, 0, 0, 0 @ r0-r3, lr
-902: .asciz ": epip4d\n"
- .align
-903:
- .endm
-#endif
-
-/*
- * These are the registers used in the syscall handler, and allow us to
- * have in theory up to 7 arguments to a function - r0 to r6.
- *
- * Note that tbl == why is intentional.
- *
- * We must set at least "tsk" and "why" when calling ret_with_reschedule.
- */
-scno .req r21 @ syscall number
-tbl .req r22 @ syscall table pointer
-why .req r22 @ Linux syscall (!= 0)
-tsk .req r23 @ current thread_info
-
-/*
- * Interrupt handling. Preserves r17, r18, r19
- */
- .macro intr_handler
-1: get_irqnr_and_base r0, r6, r5, lr
- beq 2f
- mov r1, sp
- @
- @ routine called with r0 = irq number, r1 = struct pt_regs *
- @
- adr lr, 1b
- b asm_do_IRQ
-2:
- .endm
-
-/*
- * PRIV mode handlers
- */
- .macro priv_entry
- sub sp, sp, #(S_FRAME_SIZE - 4)
- stm (r1 - r15), [sp]+
- add r5, sp, #S_R15
- stm (r16 - r28), [r5]+
-
- ldm (r1 - r3), [r0]+
- add r5, sp, #S_SP - 4 @ here for interlock avoidance
- mov r4, #-1 @ "" "" "" ""
- add r0, sp, #(S_FRAME_SIZE - 4)
- stw.w r1, [sp+], #-4 @ save the "real" r0 copied
- @ from the exception stack
-
- mov r1, lr
-
- @
- @ We are now ready to fill in the remaining blanks on the stack:
- @
- @ r0 - sp_priv
- @ r1 - lr_priv
- @ r2 - lr_<exception>, already fixed up for correct return/restart
- @ r3 - bsr_<exception>
- @ r4 - orig_r0 (see pt_regs definition in ptrace.h)
- @
- stm (r0 - r4), [r5]+
- .endm
-
-/*
- * User mode handlers
- *
- */
- .macro user_entry
- sub sp, sp, #S_FRAME_SIZE
- stm (r1 - r15), [sp+]
- add r4, sp, #S_R16
- stm (r16 - r28), [r4]+
-
- ldm (r1 - r3), [r0]+
- add r0, sp, #S_PC @ here for interlock avoidance
- mov r4, #-1 @ "" "" "" ""
-
- stw r1, [sp] @ save the "real" r0 copied
- @ from the exception stack
-
- @
- @ We are now ready to fill in the remaining blanks on the stack:
- @
- @ r2 - lr_<exception>, already fixed up for correct return/restart
- @ r3 - bsr_<exception>
- @ r4 - orig_r0 (see pt_regs definition in ptrace.h)
- @
- @ Also, separately save sp_user and lr_user
- @
- stm (r2 - r4), [r0]+
- stur (sp, lr), [r0-]
-
- @
- @ Enable the alignment trap while in kernel mode
- @
- alignment_trap r0
-
- @
- @ Clear FP to mark the first stack frame
- @
- zero_fp
- .endm
-
- .text
-
-@
-@ __invalid - generic code for failed exception
-@ (re-entrant version of handlers)
-@
-__invalid:
- sub sp, sp, #S_FRAME_SIZE
- stm (r1 - r15), [sp+]
- add r1, sp, #S_R16
- stm (r16 - r28, sp, lr), [r1]+
-
- zero_fp
-
- ldm (r4 - r6), [r0]+
- add r0, sp, #S_PC @ here for interlock avoidance
- mov r7, #-1 @ "" "" "" ""
- stw r4, [sp] @ save preserved r0
- stm (r5 - r7), [r0]+ @ lr_<exception>,
- @ asr_<exception>, "old_r0"
-
- mov r0, sp
- mov r1, asr
- b bad_mode
-ENDPROC(__invalid)
-
- .align 5
-__dabt_priv:
- priv_entry
-
- @
- @ get ready to re-enable interrupts if appropriate
- @
- mov r17, asr
- cand.a r3, #PSR_I_BIT
- bne 1f
- andn r17, r17, #PSR_I_BIT
-1:
-
- @
- @ Call the processor-specific abort handler:
- @
- @ r2 - aborted context pc
- @ r3 - aborted context asr
- @
- @ The abort handler must return the aborted address in r0, and
- @ the fault status register in r1.
- @
- movc r1, p0.c3, #0 @ get FSR
- movc r0, p0.c4, #0 @ get FAR
-
- @
- @ set desired INTR state, then call main handler
- @
- mov.a asr, r17
- mov r2, sp
- b.l do_DataAbort
-
- @
- @ INTRs off again before pulling preserved data off the stack
- @
- disable_irq r0
-
- @
- @ restore BSR and restart the instruction
- @
- ldw r2, [sp+], #S_PSR
- priv_exit r2 @ return from exception
-ENDPROC(__dabt_priv)
-
- .align 5
-__intr_priv:
- priv_entry
-
- intr_handler
-
- mov r0, #0 @ epip4d
- movc p0.c5, r0, #14
- nop; nop; nop; nop; nop; nop; nop; nop
-
- ldw r4, [sp+], #S_PSR @ irqs are already disabled
-
- priv_exit r4 @ return from exception
-ENDPROC(__intr_priv)
-
- .ltorg
-
- .align 5
-__extn_priv:
- priv_entry
-
- mov r0, sp @ struct pt_regs *regs
- mov r1, asr
- b bad_mode @ not supported
-ENDPROC(__extn_priv)
-
- .align 5
-__pabt_priv:
- priv_entry
-
- @
- @ re-enable interrupts if appropriate
- @
- mov r17, asr
- cand.a r3, #PSR_I_BIT
- bne 1f
- andn r17, r17, #PSR_I_BIT
-1:
-
- @
- @ set args, then call main handler
- @
- @ r0 - address of faulting instruction
- @ r1 - pointer to registers on stack
- @
- mov r0, r2 @ pass address of aborted instruction
- mov r1, #5
- mov.a asr, r17
- mov r2, sp @ regs
- b.l do_PrefetchAbort @ call abort handler
-
- @
- @ INTRs off again before pulling preserved data off the stack
- @
- disable_irq r0
-
- @
- @ restore BSR and restart the instruction
- @
- ldw r2, [sp+], #S_PSR
- priv_exit r2 @ return from exception
-ENDPROC(__pabt_priv)
-
- .align 5
-.LCcralign:
- .word cr_alignment
-
- .align 5
-__dabt_user:
- user_entry
-
-#ifdef CONFIG_UNICORE_FPU_F64
- cff ip, s31
- cand.a ip, #0x08000000 @ FPU execption traps?
- beq 209f
-
- ldw ip, [sp+], #S_PC
- add ip, ip, #4
- stw ip, [sp+], #S_PC
- @
- @ fall through to the emulation code, which returns using r19 if
- @ it has emulated the instruction, or the more conventional lr
- @ if we are to treat this as a real extended instruction
- @
- @ r0 - instruction
- @
-1: ldw.u r0, [r2]
- adr r19, ret_from_exception
- adr lr, 209f
- @
- @ fallthrough to call do_uc_f64
- @
-/*
- * Check whether the instruction is a co-processor instruction.
- * If yes, we need to call the relevant co-processor handler.
- *
- * Note that we don't do a full check here for the co-processor
- * instructions; all instructions with bit 27 set are well
- * defined. The only instructions that should fault are the
- * co-processor instructions.
- *
- * Emulators may wish to make use of the following registers:
- * r0 = instruction opcode.
- * r2 = PC
- * r19 = normal "successful" return address
- * r20 = this threads thread_info structure.
- * lr = unrecognised instruction return address
- */
- get_thread_info r20 @ get current thread
- and r8, r0, #0x00003c00 @ mask out CP number
- mov r7, #1
- stb r7, [r20+], #TI_USED_CP + 2 @ set appropriate used_cp[]
-
- @ F64 hardware support entry point.
- @ r0 = faulted instruction
- @ r19 = return address
- @ r20 = fp_state
- enable_irq r4
- add r20, r20, #TI_FPSTATE @ r20 = workspace
- cff r1, s31 @ get fpu FPSCR
- andn r2, r1, #0x08000000
- ctf r2, s31 @ clear 27 bit
- mov r2, sp @ nothing stacked - regdump is at TOS
- mov lr, r19 @ setup for a return to the user code
-
- @ Now call the C code to package up the bounce to the support code
- @ r0 holds the trigger instruction
- @ r1 holds the FPSCR value
- @ r2 pointer to register dump
- b ucf64_exchandler
-209:
-#endif
- @
- @ Call the processor-specific abort handler:
- @
- @ r2 - aborted context pc
- @ r3 - aborted context asr
- @
- @ The abort handler must return the aborted address in r0, and
- @ the fault status register in r1.
- @
- movc r1, p0.c3, #0 @ get FSR
- movc r0, p0.c4, #0 @ get FAR
-
- @
- @ INTRs on, then call the main handler
- @
- enable_irq r2
- mov r2, sp
- adr lr, ret_from_exception
- b do_DataAbort
-ENDPROC(__dabt_user)
-
- .align 5
-__intr_user:
- user_entry
-
- get_thread_info tsk
-
- intr_handler
-
- mov why, #0
- b ret_to_user
-ENDPROC(__intr_user)
-
- .ltorg
-
- .align 5
-__extn_user:
- user_entry
-
- mov r0, sp
- mov r1, asr
- b bad_mode
-ENDPROC(__extn_user)
-
- .align 5
-__pabt_user:
- user_entry
-
- mov r0, r2 @ pass address of aborted instruction.
- mov r1, #5
- enable_irq r1 @ Enable interrupts
- mov r2, sp @ regs
- b.l do_PrefetchAbort @ call abort handler
- /* fall through */
-/*
- * This is the return code to user mode for abort handlers
- */
-ENTRY(ret_from_exception)
- get_thread_info tsk
- mov why, #0
- b ret_to_user
-ENDPROC(__pabt_user)
-ENDPROC(ret_from_exception)
-
-/*
- * Register switch for UniCore V2 processors
- * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
- * previous and next are guaranteed not to be the same.
- */
-ENTRY(__switch_to)
- add ip, r1, #TI_CPU_SAVE
- stm.w (r4 - r15), [ip]+
- stm.w (r16 - r27, sp, lr), [ip]+
-
-#ifdef CONFIG_UNICORE_FPU_F64
- add ip, r1, #TI_FPSTATE
- sfm.w (f0 - f7 ), [ip]+
- sfm.w (f8 - f15), [ip]+
- sfm.w (f16 - f23), [ip]+
- sfm.w (f24 - f31), [ip]+
- cff r4, s31
- stw r4, [ip]
-
- add ip, r2, #TI_FPSTATE
- lfm.w (f0 - f7 ), [ip]+
- lfm.w (f8 - f15), [ip]+
- lfm.w (f16 - f23), [ip]+
- lfm.w (f24 - f31), [ip]+
- ldw r4, [ip]
- ctf r4, s31
-#endif
- add ip, r2, #TI_CPU_SAVE
- ldm.w (r4 - r15), [ip]+
- ldm (r16 - r27, sp, pc), [ip]+ @ Load all regs saved previously
-ENDPROC(__switch_to)
-
- .align 5
-/*
- * This is the fast syscall return path. We do as little as
- * possible here, and this includes saving r0 back into the PRIV
- * stack.
- */
-ret_fast_syscall:
- disable_irq r1 @ disable interrupts
- ldw r1, [tsk+], #TI_FLAGS
- cand.a r1, #_TIF_WORK_MASK
- bne fast_work_pending
-
- @ fast_restore_user_regs
- restore_user_regs fast = 1, offset = S_OFF
-
-/*
- * Ok, we need to do extra processing, enter the slow path.
- */
-fast_work_pending:
- stw.w r0, [sp+], #S_R0+S_OFF @ returned r0
-work_pending:
- cand.a r1, #_TIF_NEED_RESCHED
- bne work_resched
- mov r0, sp @ 'regs'
- mov r2, why @ 'syscall'
- cand.a r1, #_TIF_SIGPENDING @ delivering a signal?
- cmovne why, #0 @ prevent further restarts
- b.l do_notify_resume
- b ret_slow_syscall @ Check work again
-
-work_resched:
- b.l schedule
-/*
- * "slow" syscall return path. "why" tells us if this was a real syscall.
- */
-ENTRY(ret_to_user)
-ret_slow_syscall:
- disable_irq r1 @ disable interrupts
- get_thread_info tsk @ epip4d, one path error?!
- ldw r1, [tsk+], #TI_FLAGS
- cand.a r1, #_TIF_WORK_MASK
- bne work_pending
-no_work_pending:
- @ slow_restore_user_regs
- restore_user_regs fast = 0, offset = 0
-ENDPROC(ret_to_user)
-
-/*
- * This is how we return from a fork.
- */
-ENTRY(ret_from_fork)
- b.l schedule_tail
- b ret_slow_syscall
-ENDPROC(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
- b.l schedule_tail
- mov r0, r5
- adr lr, ret_slow_syscall
- mov pc, r4
-ENDPROC(ret_from_kernel_thread)
-
-/*=============================================================================
- * SWI handler
- *-----------------------------------------------------------------------------
- */
- .align 5
-ENTRY(vector_swi)
- sub sp, sp, #S_FRAME_SIZE
- stm (r0 - r15), [sp]+ @ Calling r0 - r15
- add r8, sp, #S_R16
- stm (r16 - r28), [r8]+ @ Calling r16 - r28
- add r8, sp, #S_PC
- stur (sp, lr), [r8-] @ Calling sp, lr
- mov r8, bsr @ called from non-REAL mode
- stw lr, [sp+], #S_PC @ Save calling PC
- stw r8, [sp+], #S_PSR @ Save ASR
- stw r0, [sp+], #S_OLD_R0 @ Save OLD_R0
- zero_fp
-
- /*
- * Get the system call number.
- */
- sub ip, lr, #4
- ldw.u scno, [ip] @ get SWI instruction
-
-#ifdef CONFIG_ALIGNMENT_TRAP
- ldw ip, __cr_alignment
- ldw ip, [ip]
- movc p0.c1, ip, #0 @ update control register
-#endif
- enable_irq ip
-
- get_thread_info tsk
- ldw tbl, =sys_call_table @ load syscall table pointer
-
- andn scno, scno, #0xff000000 @ mask off SWI op-code
- andn scno, scno, #0x00ff0000 @ mask off SWI op-code
-
- stm.w (r4, r5), [sp-] @ push fifth and sixth args
- ldw ip, [tsk+], #TI_FLAGS @ check for syscall tracing
- cand.a ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
- bne __sys_trace
-
- csub.a scno, #__NR_syscalls @ check upper syscall limit
- adr lr, ret_fast_syscall @ return address
- bea 1f
- ldw pc, [tbl+], scno << #2 @ call sys_* routine
-1:
- add r1, sp, #S_OFF
-2: mov why, #0 @ no longer a real syscall
- b sys_ni_syscall @ not private func
-
- /*
- * This is the really slow path. We're going to be doing
- * context switches, and waiting for our parent to respond.
- */
-__sys_trace:
- mov r2, scno
- add r1, sp, #S_OFF
- mov r0, #0 @ trace entry [IP = 0]
- b.l syscall_trace
-
- adr lr, __sys_trace_return @ return address
- mov scno, r0 @ syscall number (possibly new)
- add r1, sp, #S_R0 + S_OFF @ pointer to regs
- csub.a scno, #__NR_syscalls @ check upper syscall limit
- bea 2b
- ldm (r0 - r3), [r1]+ @ have to reload r0 - r3
- ldw pc, [tbl+], scno << #2 @ call sys_* routine
-
-__sys_trace_return:
- stw.w r0, [sp+], #S_R0 + S_OFF @ save returned r0
- mov r2, scno
- mov r1, sp
- mov r0, #1 @ trace exit [IP = 1]
- b.l syscall_trace
- b ret_slow_syscall
-
- .align 5
-#ifdef CONFIG_ALIGNMENT_TRAP
- .type __cr_alignment, #object
-__cr_alignment:
- .word cr_alignment
-#endif
- .ltorg
-
-ENTRY(sys_rt_sigreturn)
- add r0, sp, #S_OFF
- mov why, #0 @ prevent syscall restart handling
- b __sys_rt_sigreturn
-ENDPROC(sys_rt_sigreturn)
-
- __INIT
-
-/*
- * Vector stubs.
- *
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's. Note that this code must not
- * exceed 0x300 bytes.
- *
- * Common stub entry macro:
- * Enter in INTR mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
- *
- * SP points to a minimal amount of processor-private memory, the address
- * of which is copied into r0 for the mode specific abort handler.
- */
- .macro vector_stub, name, mode
- .align 5
-
-vector_\name:
- @
- @ Save r0, lr_<exception> (parent PC) and bsr_<exception>
- @ (parent ASR)
- @
- stw r0, [sp]
- stw lr, [sp+], #4 @ save r0, lr
- mov lr, bsr
- stw lr, [sp+], #8 @ save bsr
-
- @
- @ Prepare for PRIV mode. INTRs remain disabled.
- @
- mov r0, asr
- xor r0, r0, #(\mode ^ PRIV_MODE)
- mov.a bsr, r0
-
- @
- @ the branch table must immediately follow this code
- @
- and lr, lr, #0x03
- add lr, lr, #1
- mov r0, sp
- ldw lr, [pc+], lr << #2
- mov.a pc, lr @ branch to handler in PRIV mode
-ENDPROC(vector_\name)
- .align 2
- @ handler addresses follow this label
- .endm
-
- .globl __stubs_start
-__stubs_start:
-/*
- * Interrupt dispatcher
- */
- vector_stub intr, INTR_MODE
-
- .long __intr_user @ 0 (USER)
- .long __invalid @ 1
- .long __invalid @ 2
- .long __intr_priv @ 3 (PRIV)
-
-/*
- * Data abort dispatcher
- * Enter in ABT mode, bsr = USER ASR, lr = USER PC
- */
- vector_stub dabt, ABRT_MODE
-
- .long __dabt_user @ 0 (USER)
- .long __invalid @ 1
- .long __invalid @ 2 (INTR)
- .long __dabt_priv @ 3 (PRIV)
-
-/*
- * Prefetch abort dispatcher
- * Enter in ABT mode, bsr = USER ASR, lr = USER PC
- */
- vector_stub pabt, ABRT_MODE
-
- .long __pabt_user @ 0 (USER)
- .long __invalid @ 1
- .long __invalid @ 2 (INTR)
- .long __pabt_priv @ 3 (PRIV)
-
-/*
- * Undef instr entry dispatcher
- * Enter in EXTN mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
- */
- vector_stub extn, EXTN_MODE
-
- .long __extn_user @ 0 (USER)
- .long __invalid @ 1
- .long __invalid @ 2 (INTR)
- .long __extn_priv @ 3 (PRIV)
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
- .align 5
-
-.LCvswi:
- .word vector_swi
-
- .globl __stubs_end
-__stubs_end:
-
- .equ stubs_offset, __vectors_start + 0x200 - __stubs_start
-
- .globl __vectors_start
-__vectors_start:
- jepriv SYS_ERROR0
- b vector_extn + stubs_offset
- ldw pc, .LCvswi + stubs_offset
- b vector_pabt + stubs_offset
- b vector_dabt + stubs_offset
- jepriv SYS_ERROR0
- b vector_intr + stubs_offset
- jepriv SYS_ERROR0
-
- .globl __vectors_end
-__vectors_end:
-
- .data
-
- .globl cr_alignment
- .globl cr_no_alignment
-cr_alignment:
- .space 4
-cr_no_alignment:
- .space 4
diff --git a/arch/unicore32/kernel/fpu-ucf64.c b/arch/unicore32/kernel/fpu-ucf64.c
deleted file mode 100644
index 85f0af29d29b..000000000000
--- a/arch/unicore32/kernel/fpu-ucf64.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/fpu-ucf64.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <linux/init.h>
-
-#include <asm/fpu-ucf64.h>
-
-/*
- * A special flag to tell the normalisation code not to normalise.
- */
-#define F64_NAN_FLAG 0x100
-
-/*
- * A bit pattern used to indicate the initial (unset) value of the
- * exception mask, in case nothing handles an instruction. This
- * doesn't include the NAN flag, which get masked out before
- * we check for an error.
- */
-#define F64_EXCEPTION_ERROR ((u32)-1 & ~F64_NAN_FLAG)
-
-/*
- * Since we aren't building with -mfpu=f64, we need to code
- * these instructions using their MRC/MCR equivalents.
- */
-#define f64reg(_f64_) #_f64_
-
-#define cff(_f64_) ({ \
- u32 __v; \
- asm("cff %0, " f64reg(_f64_) "@ fmrx %0, " #_f64_ \
- : "=r" (__v) : : "cc"); \
- __v; \
- })
-
-#define ctf(_f64_, _var_) \
- asm("ctf %0, " f64reg(_f64_) "@ fmxr " #_f64_ ", %0" \
- : : "r" (_var_) : "cc")
-
-/*
- * Raise a SIGFPE for the current process.
- * sicode describes the signal being raised.
- */
-void ucf64_raise_sigfpe(struct pt_regs *regs)
-{
- /*
- * This is the same as NWFPE, because it's not clear what
- * this is used for
- */
- current->thread.error_code = 0;
- current->thread.trap_no = 6;
-
- send_sig_fault(SIGFPE, FPE_FLTUNK,
- (void __user *)(instruction_pointer(regs) - 4),
- current);
-}
-
-/*
- * Handle exceptions of UniCore-F64.
- */
-void ucf64_exchandler(u32 inst, u32 fpexc, struct pt_regs *regs)
-{
- u32 tmp = fpexc;
- u32 exc = F64_EXCEPTION_ERROR & fpexc;
-
- pr_debug("UniCore-F64: instruction %08x fpscr %08x\n",
- inst, fpexc);
-
- if (exc & FPSCR_CMPINSTR_BIT) {
- if (exc & FPSCR_CON)
- tmp |= FPSCR_CON;
- else
- tmp &= ~(FPSCR_CON);
- exc &= ~(FPSCR_CMPINSTR_BIT | FPSCR_CON);
- } else {
- pr_debug("UniCore-F64 Error: unhandled exceptions\n");
- pr_debug("UniCore-F64 FPSCR 0x%08x INST 0x%08x\n",
- cff(FPSCR), inst);
-
- ucf64_raise_sigfpe(regs);
- return;
- }
-
- /*
- * Update the FPSCR with the additional exception flags.
- * Comparison instructions always return at least one of
- * these flags set.
- */
- tmp &= ~(FPSCR_TRAP | FPSCR_IOS | FPSCR_OFS | FPSCR_UFS |
- FPSCR_IXS | FPSCR_HIS | FPSCR_IOC | FPSCR_OFC |
- FPSCR_UFC | FPSCR_IXC | FPSCR_HIC);
-
- tmp |= exc;
- ctf(FPSCR, tmp);
-}
-
-/*
- * F64 support code initialisation.
- */
-static int __init ucf64_init(void)
-{
- ctf(FPSCR, 0x0); /* FPSCR_UFE | FPSCR_NDE perhaps better */
-
- printk(KERN_INFO "Enable UniCore-F64 support.\n");
-
- return 0;
-}
-
-late_initcall(ucf64_init);
diff --git a/arch/unicore32/kernel/gpio.c b/arch/unicore32/kernel/gpio.c
deleted file mode 100644
index 36d395b54b7c..000000000000
--- a/arch/unicore32/kernel/gpio.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/gpio.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-/* in FPGA, no GPIO support */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio/driver.h>
-/* FIXME: needed for gpio_set_value() - convert to use descriptors or hogs */
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_LEDS
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-static const struct gpio_led puv3_gpio_leds[] = {
- { .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0,
- .default_trigger = "heartbeat", },
- { .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1,
- .default_trigger = "disk-activity", },
-};
-
-static const struct gpio_led_platform_data puv3_gpio_led_data = {
- .num_leds = ARRAY_SIZE(puv3_gpio_leds),
- .leds = (void *) puv3_gpio_leds,
-};
-
-static struct platform_device puv3_gpio_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = (void *) &puv3_gpio_led_data,
- }
-};
-
-static int __init puv3_gpio_leds_init(void)
-{
- platform_device_register(&puv3_gpio_gpio_leds);
- return 0;
-}
-
-device_initcall(puv3_gpio_leds_init);
-#endif
-
-static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- return !!(readl(GPIO_GPLR) & GPIO_GPIO(offset));
-}
-
-static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (value)
- writel(GPIO_GPIO(offset), GPIO_GPSR);
- else
- writel(GPIO_GPIO(offset), GPIO_GPCR);
-}
-
-static int puv3_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- writel(readl(GPIO_GPDR) & ~GPIO_GPIO(offset), GPIO_GPDR);
- local_irq_restore(flags);
- return 0;
-}
-
-static int puv3_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- puv3_gpio_set(chip, offset, value);
- writel(readl(GPIO_GPDR) | GPIO_GPIO(offset), GPIO_GPDR);
- local_irq_restore(flags);
- return 0;
-}
-
-static struct gpio_chip puv3_gpio_chip = {
- .label = "gpio",
- .direction_input = puv3_direction_input,
- .direction_output = puv3_direction_output,
- .set = puv3_gpio_set,
- .get = puv3_gpio_get,
- .base = 0,
- .ngpio = GPIO_MAX + 1,
-};
-
-void __init puv3_init_gpio(void)
-{
- writel(GPIO_DIR, GPIO_GPDR);
-#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919) \
- || defined(CONFIG_PUV3_DB0913)
- gpio_set_value(GPO_WIFI_EN, 1);
- gpio_set_value(GPO_HDD_LED, 1);
- gpio_set_value(GPO_VGA_EN, 1);
- gpio_set_value(GPO_LCD_EN, 1);
- gpio_set_value(GPO_CAM_PWR_EN, 0);
- gpio_set_value(GPO_LCD_VCC_EN, 1);
- gpio_set_value(GPO_SOFT_OFF, 1);
- gpio_set_value(GPO_BT_EN, 1);
- gpio_set_value(GPO_FAN_ON, 0);
- gpio_set_value(GPO_SPKR, 0);
- gpio_set_value(GPO_CPU_HEALTH, 1);
- gpio_set_value(GPO_LAN_SEL, 1);
-/*
- * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel
- * gpio_set_value(GPO_SET_V1, 1);
- * gpio_set_value(GPO_SET_V2, 1);
- */
-#endif
- gpiochip_add_data(&puv3_gpio_chip, NULL);
-}
diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S
deleted file mode 100644
index 9bbb8668f9f7..000000000000
--- a/arch/unicore32/kernel/head.S
+++ /dev/null
@@ -1,249 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/head.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/assembler.h>
-#include <asm/ptrace.h>
-#include <generated/asm-offsets.h>
-#include <asm/memory.h>
-#include <asm/thread_info.h>
-#include <asm/hwdef-copro.h>
-#include <asm/pgtable-hwdef.h>
-
-#if (PHYS_OFFSET & 0x003fffff)
-#error "PHYS_OFFSET must be at an even 4MiB boundary!"
-#endif
-
-#define KERNEL_RAM_VADDR (PAGE_OFFSET + KERNEL_IMAGE_START)
-#define KERNEL_RAM_PADDR (PHYS_OFFSET + KERNEL_IMAGE_START)
-
-#define KERNEL_PGD_PADDR (KERNEL_RAM_PADDR - 0x1000)
-#define KERNEL_PGD_VADDR (KERNEL_RAM_VADDR - 0x1000)
-
-#define KERNEL_START KERNEL_RAM_VADDR
-#define KERNEL_END _end
-
-/*
- * swapper_pg_dir is the virtual address of the initial page table.
- * We place the page tables 4K below KERNEL_RAM_VADDR. Therefore, we must
- * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
- * the least significant 16 bits to be 0x8000, but we could probably
- * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x1000.
- */
-#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
-#error KERNEL_RAM_VADDR must start at 0xXXXX8000
-#endif
-
- .globl swapper_pg_dir
- .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x1000
-
-/*
- * Kernel startup entry point.
- * ---------------------------
- *
- * This is normally called from the decompressor code. The requirements
- * are: MMU = off, D-cache = off, I-cache = dont care
- *
- * This code is mostly position independent, so if you link the kernel at
- * 0xc0008000, you call this at __pa(0xc0008000).
- */
- __HEAD
-ENTRY(stext)
- @ set asr
- mov r0, #PRIV_MODE @ ensure priv mode
- or r0, #PSR_R_BIT | PSR_I_BIT @ disable irqs
- mov.a asr, r0
-
- @ process identify
- movc r0, p0.c0, #0 @ cpuid
- movl r1, 0xff00ffff @ mask
- movl r2, 0x4d000863 @ value
- and r0, r1, r0
- cxor.a r0, r2
- bne __error_p @ invalid processor id
-
- /*
- * Clear the 4K level 1 swapper page table
- */
- movl r0, #KERNEL_PGD_PADDR @ page table address
- mov r1, #0
- add r2, r0, #0x1000
-101: stw.w r1, [r0]+, #4
- stw.w r1, [r0]+, #4
- stw.w r1, [r0]+, #4
- stw.w r1, [r0]+, #4
- cxor.a r0, r2
- bne 101b
-
- movl r4, #KERNEL_PGD_PADDR @ page table address
- mov r7, #PMD_TYPE_SECT | PMD_PRESENT @ page size: section
- or r7, r7, #PMD_SECT_CACHEABLE @ cacheable
- or r7, r7, #PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC
-
- /*
- * Create identity mapping for first 4MB of kernel to
- * cater for the MMU enable. This identity mapping
- * will be removed by paging_init(). We use our current program
- * counter to determine corresponding section base address.
- */
- mov r6, pc
- mov r6, r6 >> #22 @ start of kernel section
- or r1, r7, r6 << #22 @ flags + kernel base
- stw r1, [r4+], r6 << #2 @ identity mapping
-
- /*
- * Now setup the pagetables for our kernel direct
- * mapped region.
- */
- add r0, r4, #(KERNEL_START & 0xff000000) >> 20
- stw.w r1, [r0+], #(KERNEL_START & 0x00c00000) >> 20
- movl r6, #(KERNEL_END - 1)
- add r0, r0, #4
- add r6, r4, r6 >> #20
-102: csub.a r0, r6
- add r1, r1, #1 << 22
- bua 103f
- stw.w r1, [r0]+, #4
- b 102b
-103:
- /*
- * Then map first 4MB of ram in case it contains our boot params.
- */
- add r0, r4, #PAGE_OFFSET >> 20
- or r6, r7, #(PHYS_OFFSET & 0xffc00000)
- stw r6, [r0]
-
- ldw r15, __switch_data @ address to jump to after
-
- /*
- * Initialise TLB, Caches, and MMU state ready to switch the MMU
- * on.
- */
- mov r0, #0
- movc p0.c5, r0, #28 @ cache invalidate all
- nop8
- movc p0.c6, r0, #6 @ TLB invalidate all
- nop8
-
- /*
- * ..V. .... ..TB IDAM
- * ..1. .... ..01 1111
- */
- movl r0, #0x201f @ control register setting
-
- /*
- * Setup common bits before finally enabling the MMU. Essentially
- * this is just loading the page table pointer and domain access
- * registers.
- */
- #ifndef CONFIG_ALIGNMENT_TRAP
- andn r0, r0, #CR_A
- #endif
- #ifdef CONFIG_CPU_DCACHE_DISABLE
- andn r0, r0, #CR_D
- #endif
- #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- andn r0, r0, #CR_B
- #endif
- #ifdef CONFIG_CPU_ICACHE_DISABLE
- andn r0, r0, #CR_I
- #endif
-
- movc p0.c2, r4, #0 @ set pgd
- b __turn_mmu_on
-ENDPROC(stext)
-
-/*
- * Enable the MMU. This completely changes the structure of the visible
- * memory space. You will not be able to trace execution through this.
- *
- * r0 = cp#0 control register
- * r15 = *virtual* address to jump to upon completion
- */
- .align 5
-__turn_mmu_on:
- mov r0, r0
- movc p0.c1, r0, #0 @ write control reg
- nop @ fetch inst by phys addr
- mov pc, r15
- nop8 @ fetch inst by phys addr
-ENDPROC(__turn_mmu_on)
-
-/*
- * Setup the initial page tables. We only setup the barest
- * amount which are required to get the kernel running, which
- * generally means mapping in the kernel code.
- *
- * r9 = cpuid
- * r10 = procinfo
- *
- * Returns:
- * r0, r3, r6, r7 corrupted
- * r4 = physical page table address
- */
- .ltorg
-
- .align 2
- .type __switch_data, %object
-__switch_data:
- .long __mmap_switched
- .long __bss_start @ r6
- .long _end @ r7
- .long cr_alignment @ r8
- .long init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- *
- * r0 = cp#0 control register
- */
-__mmap_switched:
- adr r3, __switch_data + 4
-
- ldm.w (r6, r7, r8), [r3]+
- ldw sp, [r3]
-
- mov fp, #0 @ Clear BSS (and zero fp)
-203: csub.a r6, r7
- bea 204f
- stw.w fp, [r6]+,#4
- b 203b
-204:
- andn r1, r0, #CR_A @ Clear 'A' bit
- stm (r0, r1), [r8]+ @ Save control register values
- b start_kernel
-ENDPROC(__mmap_switched)
-
-/*
- * Exception handling. Something went wrong and we can't proceed. We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-__error_p:
-#ifdef CONFIG_DEBUG_LL
- adr r0, str_p1
- b.l printascii
- mov r0, r9
- b.l printhex8
- adr r0, str_p2
- b.l printascii
-901: nop8
- b 901b
-str_p1: .asciz "\nError: unrecognized processor variant (0x"
-str_p2: .asciz ").\n"
- .align
-#endif
-ENDPROC(__error_p)
-
diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c
deleted file mode 100644
index 4cdf3c846a2d..000000000000
--- a/arch/unicore32/kernel/hibernate.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/hibernate.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/gfp.h>
-#include <linux/suspend.h>
-#include <linux/memblock.h>
-#include <linux/pgtable.h>
-
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/sections.h>
-#include <asm/suspend.h>
-
-#include "mach/pm.h"
-
-/* Pointer to the temporary resume page tables */
-pgd_t *resume_pg_dir;
-
-struct swsusp_arch_regs swsusp_arch_regs_cpu0;
-
-/*
- * Create a middle page table on a resume-safe page and put a pointer to it in
- * the given global directory entry. This only returns the gd entry
- * in non-PAE compilation mode, since the middle layer is folded.
- */
-static pmd_t *resume_one_md_table_init(pgd_t *pgd)
-{
- pud_t *pud;
- p4d_t *p4d;
- pmd_t *pmd_table;
-
- p4d = p4d_offset(pgd, 0);
- pud = pud_offset(p4d, 0);
- pmd_table = pmd_offset(pud, 0);
-
- return pmd_table;
-}
-
-/*
- * Create a page table on a resume-safe page and place a pointer to it in
- * a middle page directory entry.
- */
-static pte_t *resume_one_page_table_init(pmd_t *pmd)
-{
- if (pmd_none(*pmd)) {
- pte_t *page_table = (pte_t *)get_safe_page(GFP_ATOMIC);
- if (!page_table)
- return NULL;
-
- set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_KERNEL_TABLE));
-
- BUG_ON(page_table != pte_offset_kernel(pmd, 0));
-
- return page_table;
- }
-
- return pte_offset_kernel(pmd, 0);
-}
-
-/*
- * This maps the physical memory to kernel virtual address space, a total
- * of max_low_pfn pages, by creating page tables starting from address
- * PAGE_OFFSET. The page tables are allocated out of resume-safe pages.
- */
-static int resume_physical_mapping_init(pgd_t *pgd_base)
-{
- unsigned long pfn;
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte;
- int pgd_idx, pmd_idx;
-
- pgd_idx = pgd_index(PAGE_OFFSET);
- pgd = pgd_base + pgd_idx;
- pfn = 0;
-
- for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
- pmd = resume_one_md_table_init(pgd);
- if (!pmd)
- return -ENOMEM;
-
- if (pfn >= max_low_pfn)
- continue;
-
- for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD; pmd++, pmd_idx++) {
- pte_t *max_pte;
-
- if (pfn >= max_low_pfn)
- break;
-
- /* Map with normal page tables.
- * NOTE: We can mark everything as executable here
- */
- pte = resume_one_page_table_init(pmd);
- if (!pte)
- return -ENOMEM;
-
- max_pte = pte + PTRS_PER_PTE;
- for (; pte < max_pte; pte++, pfn++) {
- if (pfn >= max_low_pfn)
- break;
-
- set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
- }
- }
- }
-
- return 0;
-}
-
-static inline void resume_init_first_level_page_table(pgd_t *pg_dir)
-{
-}
-
-int swsusp_arch_resume(void)
-{
- int error;
-
- resume_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
- if (!resume_pg_dir)
- return -ENOMEM;
-
- resume_init_first_level_page_table(resume_pg_dir);
- error = resume_physical_mapping_init(resume_pg_dir);
- if (error)
- return error;
-
- /* We have got enough memory and from now on we cannot recover */
- restore_image(resume_pg_dir, restore_pblist);
- return 0;
-}
-
-/*
- * pfn_is_nosave - check if given pfn is in the 'nosave' section
- */
-
-int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
-
- return (pfn >= begin_pfn) && (pfn < end_pfn);
-}
-
-void save_processor_state(void)
-{
-}
-
-void restore_processor_state(void)
-{
- local_flush_tlb_all();
-}
diff --git a/arch/unicore32/kernel/hibernate_asm.S b/arch/unicore32/kernel/hibernate_asm.S
deleted file mode 100644
index a589bc189e24..000000000000
--- a/arch/unicore32/kernel/hibernate_asm.S
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/hibernate_asm.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <linux/pgtable.h>
-#include <generated/asm-offsets.h>
-#include <asm/page.h>
-#include <asm/assembler.h>
-
-@ restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist)
-@ r0: resume_pg_dir
-@ r1: restore_pblist
-@ copy restore_pblist pages
-@ restore registers from swsusp_arch_regs_cpu0
-@
-ENTRY(restore_image)
- sub r0, r0, #PAGE_OFFSET
- mov r5, #0
- movc p0.c6, r5, #6 @invalidate ITLB & DTLB
- movc p0.c2, r0, #0
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- .p2align 4,,7
-101:
- csub.a r1, #0
- beq 109f
-
- ldw r6, [r1+], #PBE_ADDRESS
- ldw r7, [r1+], #PBE_ORIN_ADDRESS
-
- movl ip, #128
-102: ldm.w (r8 - r15), [r6]+
- stm.w (r8 - r15), [r7]+
- sub.a ip, ip, #1
- bne 102b
-
- ldw r1, [r1+], #PBE_NEXT
- b 101b
-
- .p2align 4,,7
-109:
- /* go back to the original page tables */
- ldw r0, =swapper_pg_dir
- sub r0, r0, #PAGE_OFFSET
- mov r5, #0
- movc p0.c6, r5, #6
- movc p0.c2, r0, #0
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
-#ifdef CONFIG_UNICORE_FPU_F64
- ldw ip, 1f
- add ip, ip, #SWSUSP_FPSTATE
- lfm.w (f0 - f7 ), [ip]+
- lfm.w (f8 - f15), [ip]+
- lfm.w (f16 - f23), [ip]+
- lfm.w (f24 - f31), [ip]+
- ldw r4, [ip]
- ctf r4, s31
-#endif
- mov r0, #0x0
- ldw ip, 1f
- add ip, ip, #SWSUSP_CPU
- ldm.w (r4 - r15), [ip]+
- ldm (r16 - r27, sp, pc), [ip]+ @ Load all regs saved previously
-
- .align 2
-1: .long swsusp_arch_regs_cpu0
-
-
-@ swsusp_arch_suspend()
-@ - prepare pc for resume, return from function without swsusp_save on resume
-@ - save registers in swsusp_arch_regs_cpu0
-@ - call swsusp_save write suspend image
-
-ENTRY(swsusp_arch_suspend)
- ldw ip, 1f
- add ip, ip, #SWSUSP_CPU
- stm.w (r4 - r15), [ip]+
- stm.w (r16 - r27, sp, lr), [ip]+
-
-#ifdef CONFIG_UNICORE_FPU_F64
- ldw ip, 1f
- add ip, ip, #SWSUSP_FPSTATE
- sfm.w (f0 - f7 ), [ip]+
- sfm.w (f8 - f15), [ip]+
- sfm.w (f16 - f23), [ip]+
- sfm.w (f24 - f31), [ip]+
- cff r4, s31
- stw r4, [ip]
-#endif
- b swsusp_save @ no return
-
-1: .long swsusp_arch_regs_cpu0
diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c
deleted file mode 100644
index c014ae3c3e48..000000000000
--- a/arch/unicore32/kernel/irq.c
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/irq.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/kallsyms.h>
-#include <linux/proc_fs.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-
-#include "setup.h"
-
-/*
- * PKUnity GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-static int GPIO_IRQ_mask = 0;
-
-#define GPIO_MASK(irq) (1 << (irq - IRQ_GPIO0))
-
-static int puv3_gpio_type(struct irq_data *d, unsigned int type)
-{
- unsigned int mask;
-
- if (d->irq < IRQ_GPIOHIGH)
- mask = 1 << d->irq;
- else
- mask = GPIO_MASK(d->irq);
-
- if (type == IRQ_TYPE_PROBE) {
- if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (type & IRQ_TYPE_EDGE_RISING)
- GPIO_IRQ_rising_edge |= mask;
- else
- GPIO_IRQ_rising_edge &= ~mask;
- if (type & IRQ_TYPE_EDGE_FALLING)
- GPIO_IRQ_falling_edge |= mask;
- else
- GPIO_IRQ_falling_edge &= ~mask;
-
- writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
- writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
- return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged. This is for IRQs from 0 to 7.
- */
-static void puv3_low_gpio_ack(struct irq_data *d)
-{
- writel((1 << d->irq), GPIO_GEDR);
-}
-
-static void puv3_low_gpio_mask(struct irq_data *d)
-{
- writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_low_gpio_unmask(struct irq_data *d)
-{
- writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on)
-{
- if (on)
- writel(readl(PM_PWER) | (1 << d->irq), PM_PWER);
- else
- writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER);
- return 0;
-}
-
-static struct irq_chip puv3_low_gpio_chip = {
- .name = "GPIO-low",
- .irq_ack = puv3_low_gpio_ack,
- .irq_mask = puv3_low_gpio_mask,
- .irq_unmask = puv3_low_gpio_unmask,
- .irq_set_type = puv3_gpio_type,
- .irq_set_wake = puv3_low_gpio_wake,
-};
-
-/*
- * IRQ8 (GPIO0 through 27) handler. We enter here with the
- * irq_controller_lock held, and IRQs disabled. Decode the IRQ
- * and call the handler.
- */
-static void puv3_gpio_handler(struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = readl(GPIO_GEDR);
- do {
- /*
- * clear down all currently active IRQ sources.
- * We will be processing them all.
- */
- writel(mask, GPIO_GEDR);
-
- irq = IRQ_GPIO0;
- do {
- if (mask & 1)
- generic_handle_irq(irq);
- mask >>= 1;
- irq++;
- } while (mask);
- mask = readl(GPIO_GEDR);
- } while (mask);
-}
-
-/*
- * GPIO0-27 edge IRQs need to be handled specially.
- * In addition, the IRQs are all collected up into one bit in the
- * interrupt controller registers.
- */
-static void puv3_high_gpio_ack(struct irq_data *d)
-{
- unsigned int mask = GPIO_MASK(d->irq);
-
- writel(mask, GPIO_GEDR);
-}
-
-static void puv3_high_gpio_mask(struct irq_data *d)
-{
- unsigned int mask = GPIO_MASK(d->irq);
-
- GPIO_IRQ_mask &= ~mask;
-
- writel(readl(GPIO_GRER) & ~mask, GPIO_GRER);
- writel(readl(GPIO_GFER) & ~mask, GPIO_GFER);
-}
-
-static void puv3_high_gpio_unmask(struct irq_data *d)
-{
- unsigned int mask = GPIO_MASK(d->irq);
-
- GPIO_IRQ_mask |= mask;
-
- writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
- writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-}
-
-static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on)
-{
- if (on)
- writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER);
- else
- writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER);
- return 0;
-}
-
-static struct irq_chip puv3_high_gpio_chip = {
- .name = "GPIO-high",
- .irq_ack = puv3_high_gpio_ack,
- .irq_mask = puv3_high_gpio_mask,
- .irq_unmask = puv3_high_gpio_unmask,
- .irq_set_type = puv3_gpio_type,
- .irq_set_wake = puv3_high_gpio_wake,
-};
-
-/*
- * We don't need to ACK IRQs on the PKUnity unless they're GPIOs
- * this is for internal IRQs i.e. from 8 to 31.
- */
-static void puv3_mask_irq(struct irq_data *d)
-{
- writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_unmask_irq(struct irq_data *d)
-{
- writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
-static int puv3_set_wake(struct irq_data *d, unsigned int on)
-{
- if (d->irq == IRQ_RTCAlarm) {
- if (on)
- writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER);
- else
- writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER);
- return 0;
- }
- return -EINVAL;
-}
-
-static struct irq_chip puv3_normal_chip = {
- .name = "PKUnity-v3",
- .irq_ack = puv3_mask_irq,
- .irq_mask = puv3_mask_irq,
- .irq_unmask = puv3_unmask_irq,
- .irq_set_wake = puv3_set_wake,
-};
-
-static struct resource irq_resource = {
- .name = "irqs",
- .start = io_v2p(PKUNITY_INTC_BASE),
- .end = io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
-};
-
-static struct puv3_irq_state {
- unsigned int saved;
- unsigned int icmr;
- unsigned int iclr;
- unsigned int iccr;
-} puv3_irq_state;
-
-static int puv3_irq_suspend(void)
-{
- struct puv3_irq_state *st = &puv3_irq_state;
-
- st->saved = 1;
- st->icmr = readl(INTC_ICMR);
- st->iclr = readl(INTC_ICLR);
- st->iccr = readl(INTC_ICCR);
-
- /*
- * Disable all GPIO-based interrupts.
- */
- writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR);
-
- /*
- * Set the appropriate edges for wakeup.
- */
- writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER);
- writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER);
-
- /*
- * Clear any pending GPIO interrupts.
- */
- writel(readl(GPIO_GEDR), GPIO_GEDR);
-
- return 0;
-}
-
-static void puv3_irq_resume(void)
-{
- struct puv3_irq_state *st = &puv3_irq_state;
-
- if (st->saved) {
- writel(st->iccr, INTC_ICCR);
- writel(st->iclr, INTC_ICLR);
-
- writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
- writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
- writel(st->icmr, INTC_ICMR);
- }
-}
-
-static struct syscore_ops puv3_irq_syscore_ops = {
- .suspend = puv3_irq_suspend,
- .resume = puv3_irq_resume,
-};
-
-static int __init puv3_irq_init_syscore(void)
-{
- register_syscore_ops(&puv3_irq_syscore_ops);
- return 0;
-}
-
-device_initcall(puv3_irq_init_syscore);
-
-void __init init_IRQ(void)
-{
- unsigned int irq;
-
- request_resource(&iomem_resource, &irq_resource);
-
- /* disable all IRQs */
- writel(0, INTC_ICMR);
-
- /* all IRQs are IRQ, not REAL */
- writel(0, INTC_ICLR);
-
- /* clear all GPIO edge detects */
- writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR);
- writel(0, GPIO_GFER);
- writel(0, GPIO_GRER);
- writel(0x0FFFFFFF, GPIO_GEDR);
-
- writel(1, INTC_ICCR);
-
- for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
- irq_set_chip(irq, &puv3_low_gpio_chip);
- irq_set_handler(irq, handle_edge_irq);
- irq_modify_status(irq,
- IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
- 0);
- }
-
- for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
- irq_set_chip(irq, &puv3_normal_chip);
- irq_set_handler(irq, handle_level_irq);
- irq_modify_status(irq,
- IRQ_NOREQUEST | IRQ_NOAUTOEN,
- IRQ_NOPROBE);
- }
-
- for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
- irq_set_chip(irq, &puv3_high_gpio_chip);
- irq_set_handler(irq, handle_edge_irq);
- irq_modify_status(irq,
- IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
- 0);
- }
-
- /*
- * Install handler for GPIO 0-27 edge detect interrupts
- */
- irq_set_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
- irq_set_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
-
-#ifdef CONFIG_PUV3_GPIO
- puv3_init_gpio();
-#endif
-}
-
-/*
- * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
- * come via this function. Instead, they should provide their
- * own 'handler'
- */
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
-
- irq_enter();
-
- /*
- * Some hardware gives randomly wrong interrupts. Rather
- * than crashing, do something sensible.
- */
- if (unlikely(irq >= nr_irqs)) {
- if (printk_ratelimit())
- printk(KERN_WARNING "Bad IRQ%u\n", irq);
- ack_bad_irq(irq);
- } else {
- generic_handle_irq(irq);
- }
-
- irq_exit();
- set_irq_regs(old_regs);
-}
-
diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c
deleted file mode 100644
index 731445008932..000000000000
--- a/arch/unicore32/kernel/ksyms.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/ksyms.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/in6.h>
-#include <linux/syscalls.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <asm/checksum.h>
-
-#include "ksyms.h"
-
-EXPORT_SYMBOL(find_first_bit);
-EXPORT_SYMBOL(find_first_zero_bit);
-EXPORT_SYMBOL(find_next_zero_bit);
-EXPORT_SYMBOL(find_next_bit);
-
- /* platform dependent support */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__const_udelay);
-
- /* string / mem functions */
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memchr);
-
- /* user mem (segment) */
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-
-EXPORT_SYMBOL(copy_page);
-
-EXPORT_SYMBOL(raw_copy_from_user);
-EXPORT_SYMBOL(raw_copy_to_user);
-EXPORT_SYMBOL(__clear_user);
-
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umodsi3);
-
diff --git a/arch/unicore32/kernel/ksyms.h b/arch/unicore32/kernel/ksyms.h
deleted file mode 100644
index 5d2d5ba324ac..000000000000
--- a/arch/unicore32/kernel/ksyms.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * libgcc functions - functions that are used internally by the
- * compiler... (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __modsi3(void);
-extern void __ucmpdi2(void);
-extern void __udivsi3(void);
-extern void __umodsi3(void);
diff --git a/arch/unicore32/kernel/module.c b/arch/unicore32/kernel/module.c
deleted file mode 100644
index 67c89ef2d6ee..000000000000
--- a/arch/unicore32/kernel/module.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/module.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/moduleloader.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/gfp.h>
-
-#include <asm/sections.h>
-
-void *module_alloc(unsigned long size)
-{
- return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
- GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
- __builtin_return_address(0));
-}
-
-int
-apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
- unsigned int relindex, struct module *module)
-{
- Elf32_Shdr *symsec = sechdrs + symindex;
- Elf32_Shdr *relsec = sechdrs + relindex;
- Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
- Elf32_Rel *rel = (void *)relsec->sh_addr;
- unsigned int i;
-
- for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
- unsigned long loc;
- Elf32_Sym *sym;
- s32 offset;
-
- offset = ELF32_R_SYM(rel->r_info);
- if (offset < 0 || offset >
- (symsec->sh_size / sizeof(Elf32_Sym))) {
- printk(KERN_ERR "%s: bad relocation, "
- "section %d reloc %d\n",
- module->name, relindex, i);
- return -ENOEXEC;
- }
-
- sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
-
- if (rel->r_offset < 0 || rel->r_offset >
- dstsec->sh_size - sizeof(u32)) {
- printk(KERN_ERR "%s: out of bounds relocation, "
- "section %d reloc %d offset %d size %d\n",
- module->name, relindex, i, rel->r_offset,
- dstsec->sh_size);
- return -ENOEXEC;
- }
-
- loc = dstsec->sh_addr + rel->r_offset;
-
- switch (ELF32_R_TYPE(rel->r_info)) {
- case R_UNICORE_NONE:
- /* ignore */
- break;
-
- case R_UNICORE_ABS32:
- *(u32 *)loc += sym->st_value;
- break;
-
- case R_UNICORE_PC24:
- case R_UNICORE_CALL:
- case R_UNICORE_JUMP24:
- offset = (*(u32 *)loc & 0x00ffffff) << 2;
- if (offset & 0x02000000)
- offset -= 0x04000000;
-
- offset += sym->st_value - loc;
- if (offset & 3 ||
- offset <= (s32)0xfe000000 ||
- offset >= (s32)0x02000000) {
- printk(KERN_ERR
- "%s: relocation out of range, section "
- "%d reloc %d sym '%s'\n", module->name,
- relindex, i, strtab + sym->st_name);
- return -ENOEXEC;
- }
-
- offset >>= 2;
-
- *(u32 *)loc &= 0xff000000;
- *(u32 *)loc |= offset & 0x00ffffff;
- break;
-
- default:
- printk(KERN_ERR "%s: unknown relocation: %u\n",
- module->name, ELF32_R_TYPE(rel->r_info));
- return -ENOEXEC;
- }
- }
- return 0;
-}
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
deleted file mode 100644
index 0d098aa05b47..000000000000
--- a/arch/unicore32/kernel/pci.c
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pci.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * PCI bios-type initialisation for PCI machines
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-static int debug_pci;
-
-#define CONFIG_CMD(bus, devfn, where) \
- (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
- switch (size) {
- case 1:
- *value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
- break;
- case 2:
- *value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
- break;
- case 4:
- *value = readl(PCICFG_DATA);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
- switch (size) {
- case 1:
- writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
- | FIELD(value, 8, (where&3)*8), PCICFG_DATA);
- break;
- case 2:
- writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
- | FIELD(value, 16, (where&2)*8), PCICFG_DATA);
- break;
- case 4:
- writel(value, PCICFG_DATA);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops pci_puv3_ops = {
- .read = puv3_read_config,
- .write = puv3_write_config,
-};
-
-void pci_puv3_preinit(void)
-{
- printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
- /* config PCI bridge base */
- writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
-
- writel(0, PCIBRI_AHBCTL0);
- writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
- writel(0xFFFF0000, PCIBRI_AHBAMR0);
- writel(0, PCIBRI_AHBTAR0);
-
- writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
- writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
- writel(0xFFFF0000, PCIBRI_AHBAMR1);
- writel(0x00000000, PCIBRI_AHBTAR1);
-
- writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
- writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
- writel(0xF8000000, PCIBRI_AHBAMR2);
- writel(0, PCIBRI_AHBTAR2);
-
- writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
-
- writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
- writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
- writel(0xF8000000, PCIBRI_PCIAMR0);
- writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
-
- writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
-}
-
-static int pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (dev->bus->number == 0) {
-#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
- if (dev->devfn == 0x00)
- return IRQ_PCIINTA;
- else if (dev->devfn == 0x08)
- return IRQ_PCIINTB;
- else if (dev->devfn == 0x10)
- return IRQ_PCIINTC;
- else if (dev->devfn == 0x18)
- return IRQ_PCIINTD;
-#endif
-#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
- if (dev->devfn == 0x30)
- return IRQ_PCIINTB;
- else if (dev->devfn == 0x60)
- return IRQ_PCIINTC;
- else if (dev->devfn == 0x58)
- return IRQ_PCIINTD;
-#endif
-#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
- /* only support 2 pci devices */
- if (dev->devfn == 0x00)
- return IRQ_PCIINTC; /* sata */
-#endif
- }
- return -1;
-}
-
-/*
- * Only first 128MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init puv3_pci_adjust_zones(unsigned long max_zone_pfn)
-{
- unsigned int sz = SZ_128M >> PAGE_SHIFT;
-
- max_zone_pfn[ZONE_DMA] = sz;
-}
-
-/*
- * If the bus contains any of these devices, then we must not turn on
- * parity checking of any kind.
- */
-static inline int pdev_bad_for_parity(struct pci_dev *dev)
-{
- return 0;
-}
-
-/*
- * pcibios_fixup_bus - Called after each bus is probed,
- * but before its children are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev;
- u16 features = PCI_COMMAND_SERR
- | PCI_COMMAND_PARITY
- | PCI_COMMAND_FAST_BACK;
-
- bus->resource[0] = &ioport_resource;
- bus->resource[1] = &iomem_resource;
-
- /*
- * Walk the devices on this bus, working out what we can
- * and can't support.
- */
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 status;
-
- pci_read_config_word(dev, PCI_STATUS, &status);
-
- /*
- * If any device on this bus does not support fast back
- * to back transfers, then the bus as a whole is not able
- * to support them. Having fast back to back transfers
- * on saves us one PCI cycle per transaction.
- */
- if (!(status & PCI_STATUS_FAST_BACK))
- features &= ~PCI_COMMAND_FAST_BACK;
-
- if (pdev_bad_for_parity(dev))
- features &= ~(PCI_COMMAND_SERR
- | PCI_COMMAND_PARITY);
-
- switch (dev->class >> 8) {
- case PCI_CLASS_BRIDGE_PCI:
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
- status |= PCI_BRIDGE_CTL_PARITY
- | PCI_BRIDGE_CTL_MASTER_ABORT;
- status &= ~(PCI_BRIDGE_CTL_BUS_RESET
- | PCI_BRIDGE_CTL_FAST_BACK);
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
- break;
-
- case PCI_CLASS_BRIDGE_CARDBUS:
- pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
- &status);
- status |= PCI_CB_BRIDGE_CTL_PARITY
- | PCI_CB_BRIDGE_CTL_MASTER_ABORT;
- pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
- status);
- break;
- }
- }
-
- /*
- * Now walk the devices again, this time setting them up.
- */
- list_for_each_entry(dev, &bus->devices, bus_list) {
- u16 cmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= features;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- L1_CACHE_BYTES >> 2);
- }
-
- /*
- * Propagate the flags to the PCI bridge.
- */
- if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- if (features & PCI_COMMAND_FAST_BACK)
- bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
- if (features & PCI_COMMAND_PARITY)
- bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
- }
-
- /*
- * Report what we did for this bus
- */
- printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
- bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
-}
-EXPORT_SYMBOL(pcibios_fixup_bus);
-
-static struct resource busn_resource = {
- .name = "PCI busn",
- .start = 0,
- .end = 255,
- .flags = IORESOURCE_BUS,
-};
-
-static int __init pci_common_init(void)
-{
- struct pci_bus *puv3_bus;
- struct pci_host_bridge *bridge;
- int ret;
-
- bridge = pci_alloc_host_bridge(0);
- if (!bridge)
- return -ENOMEM;
-
- pci_puv3_preinit();
-
- pci_add_resource(&bridge->windows, &ioport_resource);
- pci_add_resource(&bridge->windows, &iomem_resource);
- pci_add_resource(&bridge->windows, &busn_resource);
- bridge->sysdata = NULL;
- bridge->busnr = 0;
- bridge->ops = &pci_puv3_ops;
- bridge->swizzle_irq = pci_common_swizzle;
- bridge->map_irq = pci_puv3_map_irq;
-
- /* Scan our single hose. */
- ret = pci_scan_root_bus_bridge(bridge);
- if (ret) {
- pci_free_host_bridge(bridge);
- return;
- }
-
- puv3_bus = bridge->bus;
-
- if (!puv3_bus)
- panic("PCI: unable to scan bus!");
-
- pci_bus_size_bridges(puv3_bus);
- pci_bus_assign_resources(puv3_bus);
- pci_bus_add_devices(puv3_bus);
- return 0;
-}
-subsys_initcall(pci_common_init);
-
-char * __init pcibios_setup(char *str)
-{
- if (!strcmp(str, "debug")) {
- debug_pci = 1;
- return NULL;
- }
- return str;
-}
-
-void pcibios_set_master(struct pci_dev *dev)
-{
- /* No special bus mastering setup handling */
-}
-
-/*
- * From arch/i386/kernel/pci-i386.c:
- *
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might be mirrored at 0x0100-0x03ff..
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO && start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
-
- start = (start + align - 1) & ~(align - 1);
-
- return start;
-}
-
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx = 0; idx < 6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
-
- r = dev->resource + idx;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because"
- " of resource collisions\n", pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
-
- /*
- * Bridges (eg, cardbus bridges) need to be fully enabled
- */
- if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
- cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
- if (cmd != old_cmd) {
- printk("PCI: enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
diff --git a/arch/unicore32/kernel/pm.c b/arch/unicore32/kernel/pm.c
deleted file mode 100644
index 94b7f9df6c1a..000000000000
--- a/arch/unicore32/kernel/pm.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pm.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-
-#include "setup.h"
-
-struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
-static unsigned long *sleep_save;
-
-int puv3_pm_enter(suspend_state_t state)
-{
- unsigned long sleep_save_checksum = 0, checksum = 0;
- int i;
-
- /* skip registers saving for standby */
- if (state != PM_SUSPEND_STANDBY) {
- puv3_cpu_pm_fns->save(sleep_save);
- /* before sleeping, calculate and save a checksum */
- for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
- sleep_save_checksum += sleep_save[i];
- }
-
- /* *** go zzz *** */
- puv3_cpu_pm_fns->enter(state);
- cpu_init();
-#ifdef CONFIG_INPUT_KEYBOARD
- puv3_ps2_init();
-#endif
-#ifdef CONFIG_PCI
- pci_puv3_preinit();
-#endif
- if (state != PM_SUSPEND_STANDBY) {
- /* after sleeping, validate the checksum */
- for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
- checksum += sleep_save[i];
-
- /* if invalid, display message and wait for a hardware reset */
- if (checksum != sleep_save_checksum) {
- while (1)
- puv3_cpu_pm_fns->enter(state);
- }
- puv3_cpu_pm_fns->restore(sleep_save);
- }
-
- pr_debug("*** made it back from resume\n");
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(puv3_pm_enter);
-
-unsigned long sleep_phys_sp(void *sp)
-{
- return virt_to_phys(sp);
-}
-
-static int puv3_pm_valid(suspend_state_t state)
-{
- if (puv3_cpu_pm_fns)
- return puv3_cpu_pm_fns->valid(state);
-
- return -EINVAL;
-}
-
-static int puv3_pm_prepare(void)
-{
- int ret = 0;
-
- if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->prepare)
- ret = puv3_cpu_pm_fns->prepare();
-
- return ret;
-}
-
-static void puv3_pm_finish(void)
-{
- if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->finish)
- puv3_cpu_pm_fns->finish();
-}
-
-static struct platform_suspend_ops puv3_pm_ops = {
- .valid = puv3_pm_valid,
- .enter = puv3_pm_enter,
- .prepare = puv3_pm_prepare,
- .finish = puv3_pm_finish,
-};
-
-static int __init puv3_pm_init(void)
-{
- if (!puv3_cpu_pm_fns) {
- printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n");
- return -EINVAL;
- }
-
- sleep_save = kmalloc_array(puv3_cpu_pm_fns->save_count,
- sizeof(unsigned long),
- GFP_KERNEL);
- if (!sleep_save) {
- printk(KERN_ERR "failed to alloc memory for pm save\n");
- return -ENOMEM;
- }
-
- suspend_set_ops(&puv3_pm_ops);
- return 0;
-}
-
-device_initcall(puv3_pm_init);
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
deleted file mode 100644
index b4fd3a604a18..000000000000
--- a/arch/unicore32/kernel/process.c
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/process.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <stdarg.h>
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/elfcore.h>
-#include <linux/pm.h>
-#include <linux/tick.h>
-#include <linux/utsname.h>
-#include <linux/uaccess.h>
-#include <linux/random.h>
-#include <linux/gpio.h>
-#include <linux/stacktrace.h>
-
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/stacktrace.h>
-
-#include "setup.h"
-
-static const char * const processor_modes[] = {
- "UK00", "UK01", "UK02", "UK03", "UK04", "UK05", "UK06", "UK07",
- "UK08", "UK09", "UK0A", "UK0B", "UK0C", "UK0D", "UK0E", "UK0F",
- "USER", "REAL", "INTR", "PRIV", "UK14", "UK15", "UK16", "ABRT",
- "UK18", "UK19", "UK1A", "EXTN", "UK1C", "UK1D", "UK1E", "SUSR"
-};
-
-void arch_cpu_idle(void)
-{
- cpu_do_idle();
- local_irq_enable();
-}
-
-void machine_halt(void)
-{
- gpio_set_value(GPO_SOFT_OFF, 0);
-}
-
-/*
- * Function pointers to optional machine specific functions
- */
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-void machine_power_off(void)
-{
- if (pm_power_off)
- pm_power_off();
- machine_halt();
-}
-
-void machine_restart(char *cmd)
-{
- /* Disable interrupts first */
- local_irq_disable();
-
- /*
- * Tell the mm system that we are going to reboot -
- * we may need it to insert some 1:1 mappings so that
- * soft boot works.
- */
- setup_mm_for_reboot();
-
- /* Clean and invalidate caches */
- flush_cache_all();
-
- /* Turn off caching */
- cpu_proc_fin();
-
- /* Push out any further dirty data, and ensure cache is empty */
- flush_cache_all();
-
- /*
- * Now handle reboot code.
- */
- if (reboot_mode == REBOOT_SOFT) {
- /* Jump into ROM at address 0xffff0000 */
- cpu_reset(VECTORS_BASE);
- } else {
- writel(0x00002001, PM_PLLSYSCFG); /* cpu clk = 250M */
- writel(0x00100800, PM_PLLDDRCFG); /* ddr clk = 44M */
- writel(0x00002001, PM_PLLVGACFG); /* vga clk = 250M */
-
- /* Use on-chip reset capability */
- /* following instructions must be in one icache line */
- __asm__ __volatile__(
- " .align 5\n\t"
- " stw %1, [%0]\n\t"
- "201: ldw r0, [%0]\n\t"
- " cmpsub.a r0, #0\n\t"
- " bne 201b\n\t"
- " stw %3, [%2]\n\t"
- " nop; nop; nop\n\t"
- /* prefetch 3 instructions at most */
- :
- : "r" (PM_PMCR),
- "r" (PM_PMCR_CFBSYS | PM_PMCR_CFBDDR
- | PM_PMCR_CFBVGA),
- "r" (RESETC_SWRR),
- "r" (RESETC_SWRR_SRB)
- : "r0", "memory");
- }
-
- /*
- * Whoops - the architecture was unable to reboot.
- * Tell the user!
- */
- mdelay(1000);
- printk(KERN_EMERG "Reboot failed -- System halted\n");
- do { } while (1);
-}
-
-void __show_regs(struct pt_regs *regs)
-{
- unsigned long flags;
- char buf[64];
-
- show_regs_print_info(KERN_DEFAULT);
- printk("PC is at %pS\n", (void *)instruction_pointer(regs));
- printk("LR is at %pS\n", (void *)regs->UCreg_lr);
- printk(KERN_DEFAULT "pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n"
- "sp : %08lx ip : %08lx fp : %08lx\n",
- regs->UCreg_pc, regs->UCreg_lr, regs->UCreg_asr,
- regs->UCreg_sp, regs->UCreg_ip, regs->UCreg_fp);
- printk(KERN_DEFAULT "r26: %08lx r25: %08lx r24: %08lx\n",
- regs->UCreg_26, regs->UCreg_25,
- regs->UCreg_24);
- printk(KERN_DEFAULT "r23: %08lx r22: %08lx r21: %08lx r20: %08lx\n",
- regs->UCreg_23, regs->UCreg_22,
- regs->UCreg_21, regs->UCreg_20);
- printk(KERN_DEFAULT "r19: %08lx r18: %08lx r17: %08lx r16: %08lx\n",
- regs->UCreg_19, regs->UCreg_18,
- regs->UCreg_17, regs->UCreg_16);
- printk(KERN_DEFAULT "r15: %08lx r14: %08lx r13: %08lx r12: %08lx\n",
- regs->UCreg_15, regs->UCreg_14,
- regs->UCreg_13, regs->UCreg_12);
- printk(KERN_DEFAULT "r11: %08lx r10: %08lx r9 : %08lx r8 : %08lx\n",
- regs->UCreg_11, regs->UCreg_10,
- regs->UCreg_09, regs->UCreg_08);
- printk(KERN_DEFAULT "r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
- regs->UCreg_07, regs->UCreg_06,
- regs->UCreg_05, regs->UCreg_04);
- printk(KERN_DEFAULT "r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
- regs->UCreg_03, regs->UCreg_02,
- regs->UCreg_01, regs->UCreg_00);
-
- flags = regs->UCreg_asr;
- buf[0] = flags & PSR_S_BIT ? 'S' : 's';
- buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z';
- buf[2] = flags & PSR_C_BIT ? 'C' : 'c';
- buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
- buf[4] = '\0';
-
- printk(KERN_DEFAULT "Flags: %s INTR o%s REAL o%s Mode %s Segment %s\n",
- buf, interrupts_enabled(regs) ? "n" : "ff",
- fast_interrupts_enabled(regs) ? "n" : "ff",
- processor_modes[processor_mode(regs)],
- uaccess_kernel() ? "kernel" : "user");
- {
- unsigned int ctrl;
-
- buf[0] = '\0';
- {
- unsigned int transbase;
- asm("movc %0, p0.c2, #0\n"
- : "=r" (transbase));
- snprintf(buf, sizeof(buf), " Table: %08x", transbase);
- }
- asm("movc %0, p0.c1, #0\n" : "=r" (ctrl));
-
- printk(KERN_DEFAULT "Control: %08x%s\n", ctrl, buf);
- }
-}
-
-void show_regs(struct pt_regs *regs)
-{
- printk(KERN_DEFAULT "\n");
- printk(KERN_DEFAULT "Pid: %d, comm: %20s\n",
- task_pid_nr(current), current->comm);
- __show_regs(regs);
- __backtrace();
-}
-
-void flush_thread(void)
-{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = current;
-
- memset(thread->used_cp, 0, sizeof(thread->used_cp));
- memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
-#ifdef CONFIG_UNICORE_FPU_F64
- memset(&thread->fpstate, 0, sizeof(struct fp_state));
-#endif
-}
-
-void release_thread(struct task_struct *dead_task)
-{
-}
-
-asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
-
-int
-copy_thread(unsigned long clone_flags, unsigned long stack_start,
- unsigned long stk_sz, struct task_struct *p)
-{
- struct thread_info *thread = task_thread_info(p);
- struct pt_regs *childregs = task_pt_regs(p);
-
- memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
- thread->cpu_context.sp = (unsigned long)childregs;
- if (unlikely(p->flags & PF_KTHREAD)) {
- thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread;
- thread->cpu_context.r4 = stack_start;
- thread->cpu_context.r5 = stk_sz;
- memset(childregs, 0, sizeof(struct pt_regs));
- } else {
- thread->cpu_context.pc = (unsigned long)ret_from_fork;
- *childregs = *current_pt_regs();
- childregs->UCreg_00 = 0;
- if (stack_start)
- childregs->UCreg_sp = stack_start;
-
- if (clone_flags & CLONE_SETTLS)
- childregs->UCreg_16 = childregs->UCreg_03;
- }
- return 0;
-}
-
-/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
- elf_core_copy_regs(elfregs, task_pt_regs(t));
- return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fp)
-{
- struct thread_info *thread = current_thread_info();
- int used_math = thread->used_cp[1] | thread->used_cp[2];
-
-#ifdef CONFIG_UNICORE_FPU_F64
- if (used_math)
- memcpy(fp, &thread->fpstate, sizeof(*fp));
-#endif
- return used_math != 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
-unsigned long get_wchan(struct task_struct *p)
-{
- struct stackframe frame;
- int count = 0;
- if (!p || p == current || p->state == TASK_RUNNING)
- return 0;
-
- frame.fp = thread_saved_fp(p);
- frame.sp = thread_saved_sp(p);
- frame.lr = 0; /* recovered from the stack */
- frame.pc = thread_saved_pc(p);
- do {
- int ret = unwind_frame(&frame);
- if (ret < 0)
- return 0;
- if (!in_sched_functions(frame.pc))
- return frame.pc;
- } while ((count++) < 16);
- return 0;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
- return randomize_page(mm->brk, 0x02000000);
-}
-
-/*
- * The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code. Let's declare a mapping
- * for it so it is visible through ptrace and /proc/<pid>/mem.
- */
-
-int vectors_user_mapping(void)
-{
- struct mm_struct *mm = current->mm;
- return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
- VM_READ | VM_EXEC |
- VM_MAYREAD | VM_MAYEXEC |
- VM_DONTEXPAND | VM_DONTDUMP,
- NULL);
-}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
- return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
-}
diff --git a/arch/unicore32/kernel/ptrace.c b/arch/unicore32/kernel/ptrace.c
deleted file mode 100644
index 0f216567b90a..000000000000
--- a/arch/unicore32/kernel/ptrace.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/ptrace.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * By Ross Biro 1/23/92
- */
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-#include <linux/uaccess.h>
-#include <linux/sched/task_stack.h>
-
-/*
- * this routine will get a word off of the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline long get_user_reg(struct task_struct *task, int offset)
-{
- return task_pt_regs(task)->uregs[offset];
-}
-
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline int
-put_user_reg(struct task_struct *task, int offset, long data)
-{
- struct pt_regs newregs, *regs = task_pt_regs(task);
- int ret = -EINVAL;
-
- newregs = *regs;
- newregs.uregs[offset] = data;
-
- if (valid_user_regs(&newregs)) {
- regs->uregs[offset] = data;
- ret = 0;
- }
-
- return ret;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- */
-void ptrace_disable(struct task_struct *child)
-{
-}
-
-/*
- * We actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
- unsigned long __user *ret)
-{
- unsigned long tmp;
-
- tmp = 0;
- if (off < sizeof(struct pt_regs))
- tmp = get_user_reg(tsk, off >> 2);
-
- return put_user(tmp, ret);
-}
-
-/*
- * We actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
- unsigned long val)
-{
- if (off >= sizeof(struct pt_regs))
- return 0;
-
- return put_user_reg(tsk, off >> 2, val);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- int ret;
- unsigned long __user *datap = (unsigned long __user *) data;
-
- switch (request) {
- case PTRACE_PEEKUSR:
- ret = ptrace_read_user(child, addr, datap);
- break;
-
- case PTRACE_POKEUSR:
- ret = ptrace_write_user(child, addr, data);
- break;
-
- case PTRACE_GET_THREAD_AREA:
- ret = put_user(task_pt_regs(child)->UCreg_16,
- datap);
- break;
-
- default:
- ret = ptrace_request(child, request, addr, data);
- break;
- }
-
- return ret;
-}
-
-asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
-{
- unsigned long ip;
-
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return scno;
- if (!(current->ptrace & PT_PTRACED))
- return scno;
-
- /*
- * Save IP. IP is used to denote syscall entry/exit:
- * IP = 0 -> entry, = 1 -> exit
- */
- ip = regs->UCreg_ip;
- regs->UCreg_ip = why;
-
- current_thread_info()->syscall = scno;
-
- /* the 0x80 provides a way for the tracing parent to distinguish
- between a syscall stop and SIGTRAP delivery */
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
- regs->UCreg_ip = ip;
-
- return current_thread_info()->syscall;
-}
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
deleted file mode 100644
index 78f12e627365..000000000000
--- a/arch/unicore32/kernel/puv3-core.c
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/puv3-core.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/cnt32_to_63.h>
-#include <linux/usb/musb.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/pm.h>
-
-/*
- * This is the PKUnity sched_clock implementation. This has
- * a resolution of 271ns, and a maximum value of 32025597s (370 days).
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to this function.
- *
- * ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32
- */
-unsigned long long sched_clock(void)
-{
- unsigned long long v = cnt32_to_63(readl(OST_OSCR));
-
- /* original conservative method, but overflow frequently
- * v *= NSEC_PER_SEC >> 12;
- * do_div(v, CLOCK_TICK_RATE >> 12);
- */
- v = ((v & 0x7fffffffffffffffULL) * 2235) >> 5;
-
- return v;
-}
-
-static struct resource puv3_usb_resources[] = {
- /* order is significant! */
- {
- .start = io_v2p(PKUNITY_USB_BASE),
- .end = io_v2p(PKUNITY_USB_BASE) + 0x3ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_USB,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_USB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct musb_hdrc_config puv3_usb_config[] = {
- {
- .num_eps = 16,
- .multipoint = 1,
-#ifdef CONFIG_USB_INVENTRA_DMA
- .dma = 1,
- .dma_channels = 8,
-#endif
- },
-};
-
-static struct musb_hdrc_platform_data puv3_usb_plat = {
- .mode = MUSB_HOST,
- .min_power = 100,
- .clock = 0,
- .config = puv3_usb_config,
-};
-
-static struct resource puv3_mmc_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_SDC_BASE),
- .end = io_v2p(PKUNITY_SDC_BASE) + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SDC,
- .end = IRQ_SDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource puv3_unigfx_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_UNIGFX_BASE),
- .end = io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource puv3_rtc_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_RTC_BASE),
- .end = io_v2p(PKUNITY_RTC_BASE) + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTCAlarm,
- .end = IRQ_RTCAlarm,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource puv3_pwm_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_OST_BASE) + 0x80,
- .end = io_v2p(PKUNITY_OST_BASE) + 0xff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource puv3_uart0_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_UART0_BASE),
- .end = io_v2p(PKUNITY_UART0_BASE) + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART0,
- .end = IRQ_UART0,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource puv3_uart1_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_UART1_BASE),
- .end = io_v2p(PKUNITY_UART1_BASE) + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UART1,
- .end = IRQ_UART1,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource puv3_umal_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_UMAL_BASE),
- .end = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_UMAL,
- .end = IRQ_UMAL,
- .flags = IORESOURCE_IRQ
- }
-};
-
-#ifdef CONFIG_PUV3_PM
-
-#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum {
- SLEEP_SAVE_PM_PLLDDRCFG,
- SLEEP_SAVE_COUNT
-};
-
-
-static void puv3_cpu_pm_save(unsigned long *sleep_save)
-{
-/* SAVE(PM_PLLDDRCFG); */
-}
-
-static void puv3_cpu_pm_restore(unsigned long *sleep_save)
-{
-/* RESTORE(PM_PLLDDRCFG); */
-}
-
-static int puv3_cpu_pm_prepare(void)
-{
- /* set resume return address */
- writel(virt_to_phys(puv3_cpu_resume), PM_DIVCFG);
- return 0;
-}
-
-static void puv3_cpu_pm_enter(suspend_state_t state)
-{
- /* Clear reset status */
- writel(RESETC_RSSR_HWR | RESETC_RSSR_WDR
- | RESETC_RSSR_SMR | RESETC_RSSR_SWR, RESETC_RSSR);
-
- switch (state) {
-/* case PM_SUSPEND_ON:
- puv3_cpu_idle();
- break; */
- case PM_SUSPEND_MEM:
- puv3_cpu_pm_prepare();
- puv3_cpu_suspend(PM_PMCR_SFB);
- break;
- }
-}
-
-static int puv3_cpu_pm_valid(suspend_state_t state)
-{
- return state == PM_SUSPEND_MEM;
-}
-
-static void puv3_cpu_pm_finish(void)
-{
- /* ensure not to come back here if it wasn't intended */
- /* PSPR = 0; */
-}
-
-static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss = {
- .save_count = SLEEP_SAVE_COUNT,
- .valid = puv3_cpu_pm_valid,
- .save = puv3_cpu_pm_save,
- .restore = puv3_cpu_pm_restore,
- .enter = puv3_cpu_pm_enter,
- .prepare = puv3_cpu_pm_prepare,
- .finish = puv3_cpu_pm_finish,
-};
-
-static void __init puv3_init_pm(void)
-{
- puv3_cpu_pm_fns = &puv3_cpu_pm_fnss;
-}
-#else
-static inline void puv3_init_pm(void) {}
-#endif
-
-void puv3_ps2_init(void)
-{
- struct clk *bclk32;
-
- bclk32 = clk_get(NULL, "BUS32_CLK");
- writel(clk_get_rate(bclk32) / 200000, PS2_CNT); /* should > 5us */
-}
-
-void __init puv3_core_init(void)
-{
- puv3_init_pm();
- puv3_ps2_init();
-
- platform_device_register_simple("PKUnity-v3-RTC", -1,
- puv3_rtc_resources, ARRAY_SIZE(puv3_rtc_resources));
- platform_device_register_simple("PKUnity-v3-UMAL", -1,
- puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources));
- platform_device_register_simple("PKUnity-v3-MMC", -1,
- puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources));
- platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
- puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources));
- platform_device_register_simple("PKUnity-v3-PWM", -1,
- puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources));
- platform_device_register_simple("PKUnity-v3-UART", 0,
- puv3_uart0_resources, ARRAY_SIZE(puv3_uart0_resources));
- platform_device_register_simple("PKUnity-v3-UART", 1,
- puv3_uart1_resources, ARRAY_SIZE(puv3_uart1_resources));
- platform_device_register_simple("PKUnity-v3-AC97", -1, NULL, 0);
- platform_device_register_resndata(NULL, "musb_hdrc", -1,
- puv3_usb_resources, ARRAY_SIZE(puv3_usb_resources),
- &puv3_usb_plat, sizeof(puv3_usb_plat));
-}
-
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
deleted file mode 100644
index e251f5028396..000000000000
--- a/arch/unicore32/kernel/puv3-nb0916.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/puv3-nb0916.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <mach/hardware.h>
-
-static struct physmap_flash_data physmap_flash_data = {
- .width = 1,
-};
-
-static struct resource physmap_flash_resource = {
- .start = 0xFFF80000,
- .end = 0xFFFFFFFF,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource puv3_i2c_resources[] = {
- [0] = {
- .start = io_v2p(PKUNITY_I2C_BASE),
- .end = io_v2p(PKUNITY_I2C_BASE) + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_I2C,
- .end = IRQ_I2C,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct pwm_lookup nb0916_pwm_lookup[] = {
- PWM_LOOKUP("PKUnity-v3-PWM", 0, "pwm-backlight", NULL, 70 * 1024,
- PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data nb0916_backlight_data = {
- .max_brightness = 100,
- .dft_brightness = 100,
-};
-
-static struct gpio_keys_button nb0916_gpio_keys[] = {
- {
- .type = EV_KEY,
- .code = KEY_POWER,
- .gpio = GPI_SOFF_REQ,
- .desc = "Power Button",
- .wakeup = 1,
- .active_low = 1,
- },
- {
- .type = EV_KEY,
- .code = BTN_TOUCH,
- .gpio = GPI_BTN_TOUCH,
- .desc = "Touchpad Button",
- .wakeup = 1,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data nb0916_gpio_button_data = {
- .buttons = nb0916_gpio_keys,
- .nbuttons = ARRAY_SIZE(nb0916_gpio_keys),
-};
-
-static irqreturn_t nb0916_lcdcaseoff_handler(int irq, void *dev_id)
-{
- if (gpio_get_value(GPI_LCD_CASE_OFF))
- gpio_set_value(GPO_LCD_EN, 1);
- else
- gpio_set_value(GPO_LCD_EN, 0);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t nb0916_overheat_handler(int irq, void *dev_id)
-{
- machine_halt();
- /* SYSTEM HALT, NO RETURN */
- return IRQ_HANDLED;
-}
-
-static struct i2c_board_info __initdata puv3_i2c_devices[] = {
- { I2C_BOARD_INFO("lm75", I2C_TAR_THERMAL), },
- { I2C_BOARD_INFO("bq27200", I2C_TAR_PWIC), },
- { I2C_BOARD_INFO("24c02", I2C_TAR_EEPROM), },
-};
-
-int __init mach_nb0916_init(void)
-{
- i2c_register_board_info(0, puv3_i2c_devices,
- ARRAY_SIZE(puv3_i2c_devices));
-
- platform_device_register_simple("PKUnity-v3-I2C", -1,
- puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources));
-
- pwm_add_table(nb0916_pwm_lookup, ARRAY_SIZE(nb0916_pwm_lookup));
-
- platform_device_register_data(NULL, "pwm-backlight", -1,
- &nb0916_backlight_data, sizeof(nb0916_backlight_data));
-
- platform_device_register_data(NULL, "gpio-keys", -1,
- &nb0916_gpio_button_data, sizeof(nb0916_gpio_button_data));
-
- platform_device_register_resndata(NULL, "physmap-flash", -1,
- &physmap_flash_resource, 1,
- &physmap_flash_data, sizeof(physmap_flash_data));
-
- if (request_irq(gpio_to_irq(GPI_LCD_CASE_OFF),
- &nb0916_lcdcaseoff_handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "NB0916 lcd case off", NULL) < 0) {
-
- printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n",
- gpio_to_irq(GPI_LCD_CASE_OFF));
- }
-
- if (request_irq(gpio_to_irq(GPI_OTP_INT), &nb0916_overheat_handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "NB0916 overheating protection", NULL) < 0) {
-
- printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n",
- gpio_to_irq(GPI_OTP_INT));
- }
-
- return 0;
-}
-
-subsys_initcall_sync(mach_nb0916_init);
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
deleted file mode 100644
index 0c4242a5ee1d..000000000000
--- a/arch/unicore32/kernel/setup.c
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/setup.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/utsname.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/memblock.h>
-#include <linux/seq_file.h>
-#include <linux/screen_info.h>
-#include <linux/init.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/elf.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-#include <asm/memblock.h>
-
-#include "setup.h"
-
-#ifndef MEM_SIZE
-#define MEM_SIZE (16*1024*1024)
-#endif
-
-struct stack {
- u32 irq[3];
- u32 abt[3];
- u32 und[3];
-} ____cacheline_aligned;
-
-static struct stack stacks[NR_CPUS];
-
-#ifdef CONFIG_VGA_CONSOLE
-struct screen_info screen_info;
-#endif
-
-char elf_platform[ELF_PLATFORM_SIZE];
-EXPORT_SYMBOL(elf_platform);
-
-static char __initdata cmd_line[COMMAND_LINE_SIZE];
-
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-
-/*
- * Standard memory resources
- */
-static struct resource mem_res[] = {
- {
- .name = "Kernel code",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_SYSTEM_RAM
- },
- {
- .name = "Kernel data",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_SYSTEM_RAM
- }
-};
-
-#define kernel_code mem_res[0]
-#define kernel_data mem_res[1]
-
-/*
- * These functions re-use the assembly code in head.S, which
- * already provide the required functionality.
- */
-static void __init setup_processor(void)
-{
- printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n",
- uc32_cpuid, (int)(uc32_cpuid >> 16) & 15, cr_alignment);
-
- sprintf(init_utsname()->machine, "puv3");
- sprintf(elf_platform, "ucv2");
-}
-
-/*
- * cpu_init - initialise one CPU.
- *
- * cpu_init sets up the per-CPU stacks.
- */
-void cpu_init(void)
-{
- unsigned int cpu = smp_processor_id();
- struct stack *stk = &stacks[cpu];
-
- /*
- * setup stacks for re-entrant exception handlers
- */
- __asm__ (
- "mov.a asr, %1\n\t"
- "add sp, %0, %2\n\t"
- "mov.a asr, %3\n\t"
- "add sp, %0, %4\n\t"
- "mov.a asr, %5\n\t"
- "add sp, %0, %6\n\t"
- "mov.a asr, %7"
- :
- : "r" (stk),
- "r" (PSR_R_BIT | PSR_I_BIT | INTR_MODE),
- "I" (offsetof(struct stack, irq[0])),
- "r" (PSR_R_BIT | PSR_I_BIT | ABRT_MODE),
- "I" (offsetof(struct stack, abt[0])),
- "r" (PSR_R_BIT | PSR_I_BIT | EXTN_MODE),
- "I" (offsetof(struct stack, und[0])),
- "r" (PSR_R_BIT | PSR_I_BIT | PRIV_MODE)
- : "r30", "cc");
-}
-
-static int __init uc32_add_memory(unsigned long start, unsigned long size)
-{
- struct membank *bank = &meminfo.bank[meminfo.nr_banks];
-
- if (meminfo.nr_banks >= NR_BANKS) {
- printk(KERN_CRIT "NR_BANKS too low, "
- "ignoring memory at %#lx\n", start);
- return -EINVAL;
- }
-
- /*
- * Ensure that start/size are aligned to a page boundary.
- * Size is appropriately rounded down, start is rounded up.
- */
- size -= start & ~PAGE_MASK;
-
- bank->start = PAGE_ALIGN(start);
- bank->size = size & PAGE_MASK;
-
- /*
- * Check whether this memory region has non-zero size or
- * invalid node number.
- */
- if (bank->size == 0)
- return -EINVAL;
-
- meminfo.nr_banks++;
- return 0;
-}
-
-/*
- * Pick out the memory size. We look for mem=size@...rt,
- * where start and size are "size[KkMm]"
- */
-static int __init early_mem(char *p)
-{
- static int usermem __initdata = 1;
- unsigned long size, start;
- char *endp;
-
- /*
- * If the user specifies memory size, we
- * blow away any automatically generated
- * size.
- */
- if (usermem) {
- usermem = 0;
- meminfo.nr_banks = 0;
- }
-
- start = PHYS_OFFSET;
- size = memparse(p, &endp);
- if (*endp == '@')
- start = memparse(endp + 1, NULL);
-
- uc32_add_memory(start, size);
-
- return 0;
-}
-early_param("mem", early_mem);
-
-static void __init
-request_standard_resources(struct meminfo *mi)
-{
- struct resource *res;
- int i;
-
- kernel_code.start = virt_to_phys(_stext);
- kernel_code.end = virt_to_phys(_etext - 1);
- kernel_data.start = virt_to_phys(_sdata);
- kernel_data.end = virt_to_phys(_end - 1);
-
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].size == 0)
- continue;
-
- res = memblock_alloc_low(sizeof(*res), SMP_CACHE_BYTES);
- if (!res)
- panic("%s: Failed to allocate %zu bytes align=%x\n",
- __func__, sizeof(*res), SMP_CACHE_BYTES);
-
- res->name = "System RAM";
- res->start = mi->bank[i].start;
- res->end = mi->bank[i].start + mi->bank[i].size - 1;
- res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-
- request_resource(&iomem_resource, res);
-
- if (kernel_code.start >= res->start &&
- kernel_code.end <= res->end)
- request_resource(res, &kernel_code);
- if (kernel_data.start >= res->start &&
- kernel_data.end <= res->end)
- request_resource(res, &kernel_data);
- }
-}
-
-static void (*init_machine)(void) __initdata;
-
-static int __init customize_machine(void)
-{
- /* customizes platform devices, or adds new ones */
- if (init_machine)
- init_machine();
- return 0;
-}
-arch_initcall(customize_machine);
-
-void __init setup_arch(char **cmdline_p)
-{
- char *from = default_command_line;
-
- setup_processor();
-
- init_mm.start_code = (unsigned long) _stext;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = (unsigned long) _end;
-
- /* parse_early_param needs a boot_command_line */
- strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
- /* populate cmd_line too for later use, preserving boot_command_line */
- strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = cmd_line;
-
- parse_early_param();
-
- uc32_memblock_init(&meminfo);
-
- paging_init();
- request_standard_resources(&meminfo);
-
- cpu_init();
-
- /*
- * Set up various architecture-specific pointers
- */
- init_machine = puv3_core_init;
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
- conswitchp = &vga_con;
-#endif
-#endif
- early_trap_init();
-}
-
-static struct cpu cpuinfo_unicore;
-
-static int __init topology_init(void)
-{
- int i;
-
- for_each_possible_cpu(i)
- register_cpu(&cpuinfo_unicore, i);
-
- return 0;
-}
-subsys_initcall(topology_init);
-
-#ifdef CONFIG_HAVE_PROC_CPU
-static int __init proc_cpu_init(void)
-{
- struct proc_dir_entry *res;
-
- res = proc_mkdir("cpu", NULL);
- if (!res)
- return -ENOMEM;
- return 0;
-}
-fs_initcall(proc_cpu_init);
-#endif
-
-static int c_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "Processor\t: UniCore-II rev %d (%s)\n",
- (int)(uc32_cpuid >> 16) & 15, elf_platform);
-
- seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
- loops_per_jiffy / (500000/HZ),
- (loops_per_jiffy / (5000/HZ)) % 100);
-
- /* dump out the processor features */
- seq_puts(m, "Features\t: CMOV UC-F64");
-
- seq_printf(m, "\nCPU implementer\t: 0x%02x\n", uc32_cpuid >> 24);
- seq_printf(m, "CPU architecture: 2\n");
- seq_printf(m, "CPU revision\t: %d\n", (uc32_cpuid >> 16) & 15);
-
- seq_printf(m, "Cache type\t: write-back\n"
- "Cache clean\t: cp0 c5 ops\n"
- "Cache lockdown\t: not support\n"
- "Cache format\t: Harvard\n");
-
- seq_puts(m, "\n");
-
- seq_printf(m, "Hardware\t: PKUnity v3\n");
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < 1 ? (void *)1 : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return NULL;
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = c_show
-};
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
deleted file mode 100644
index 967352323185..000000000000
--- a/arch/unicore32/kernel/setup.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/setup.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_KERNEL_SETUP_H__
-#define __UNICORE_KERNEL_SETUP_H__
-
-#include <asm/hwdef-copro.h>
-
-extern void paging_init(void);
-extern void puv3_core_init(void);
-extern void cpu_init(void);
-
-extern void puv3_ps2_init(void);
-extern void pci_puv3_preinit(void);
-extern void __init puv3_init_gpio(void);
-
-extern void setup_mm_for_reboot(void);
-
-extern char __stubs_start[], __stubs_end[];
-extern char __vectors_start[], __vectors_end[];
-
-extern void kernel_thread_helper(void);
-
-extern void __init early_signal_init(void);
-
-extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, const char *loglvl);
-
-extern void __show_regs(struct pt_regs *);
-
-#endif
diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
deleted file mode 100644
index 3946182a835d..000000000000
--- a/arch/unicore32/kernel/signal.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/signal.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/personality.h>
-#include <linux/uaccess.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/unistd.h>
-
-#include <asm/cacheflush.h>
-#include <asm/ucontext.h>
-
-/*
- * For UniCore syscalls, we encode the syscall number into the instruction.
- */
-#define SWI_SYS_SIGRETURN (0xff000000) /* error number for new abi */
-#define SWI_SYS_RT_SIGRETURN (0xff000000 | (__NR_rt_sigreturn))
-#define SWI_SYS_RESTART (0xff000000 | (__NR_restart_syscall))
-
-#define KERN_SIGRETURN_CODE (KUSER_VECPAGE_BASE + 0x00000500)
-#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
-
-const unsigned long sigreturn_codes[3] = {
- SWI_SYS_SIGRETURN, SWI_SYS_RT_SIGRETURN,
-};
-
-const unsigned long syscall_restart_code[2] = {
- SWI_SYS_RESTART, /* swi __NR_restart_syscall */
- 0x69efc004, /* ldr pc, [sp], #4 */
-};
-
-/*
- * Do a signal return; undo the signal stack. These are aligned to 64-bit.
- */
-struct sigframe {
- struct ucontext uc;
- unsigned long retcode[2];
-};
-
-struct rt_sigframe {
- struct siginfo info;
- struct sigframe sig;
-};
-
-static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
-{
- sigset_t set;
- int err;
-
- err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
- if (err == 0)
- set_current_blocked(&set);
-
- err |= __get_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
- err |= __get_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
- err |= __get_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
- err |= __get_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
- err |= __get_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
- err |= __get_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
- err |= __get_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
- err |= __get_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
- err |= __get_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
- err |= __get_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
- err |= __get_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
- err |= __get_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
- err |= __get_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
- err |= __get_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
- err |= __get_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
- err |= __get_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
- err |= __get_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
- err |= __get_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
- err |= __get_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
- err |= __get_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
- err |= __get_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
- err |= __get_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
- err |= __get_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
- err |= __get_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
- err |= __get_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
- err |= __get_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
- err |= __get_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
- err |= __get_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
- err |= __get_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
- err |= __get_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
- err |= __get_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
- err |= __get_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
- err |= __get_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
-
- err |= !valid_user_regs(regs);
-
- return err;
-}
-
-asmlinkage int __sys_rt_sigreturn(struct pt_regs *regs)
-{
- struct rt_sigframe __user *frame;
-
- /* Always make any pending restarted system calls return -EINTR */
- current->restart_block.fn = do_no_restart_syscall;
-
- /*
- * Since we stacked the signal on a 64-bit boundary,
- * then 'sp' should be word aligned here. If it's
- * not, then the user is trying to mess with us.
- */
- if (regs->UCreg_sp & 7)
- goto badframe;
-
- frame = (struct rt_sigframe __user *)regs->UCreg_sp;
-
- if (!access_ok(frame, sizeof(*frame)))
- goto badframe;
-
- if (restore_sigframe(regs, &frame->sig))
- goto badframe;
-
- if (restore_altstack(&frame->sig.uc.uc_stack))
- goto badframe;
-
- return regs->UCreg_00;
-
-badframe:
- force_sig(SIGSEGV);
- return 0;
-}
-
-static int setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs,
- sigset_t *set)
-{
- int err = 0;
-
- err |= __put_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
- err |= __put_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
- err |= __put_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
- err |= __put_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
- err |= __put_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
- err |= __put_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
- err |= __put_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
- err |= __put_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
- err |= __put_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
- err |= __put_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
- err |= __put_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
- err |= __put_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
- err |= __put_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
- err |= __put_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
- err |= __put_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
- err |= __put_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
- err |= __put_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
- err |= __put_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
- err |= __put_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
- err |= __put_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
- err |= __put_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
- err |= __put_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
- err |= __put_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
- err |= __put_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
- err |= __put_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
- err |= __put_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
- err |= __put_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
- err |= __put_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
- err |= __put_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
- err |= __put_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
- err |= __put_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
- err |= __put_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
- err |= __put_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
-
- err |= __put_user(current->thread.trap_no,
- &sf->uc.uc_mcontext.trap_no);
- err |= __put_user(current->thread.error_code,
- &sf->uc.uc_mcontext.error_code);
- err |= __put_user(current->thread.address,
- &sf->uc.uc_mcontext.fault_address);
- err |= __put_user(set->sig[0], &sf->uc.uc_mcontext.oldmask);
-
- err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
-
- return err;
-}
-
-static inline void __user *get_sigframe(struct k_sigaction *ka,
- struct pt_regs *regs, int framesize)
-{
- unsigned long sp = regs->UCreg_sp;
- void __user *frame;
-
- /*
- * This is the X/Open sanctioned signal stack switching.
- */
- if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
- sp = current->sas_ss_sp + current->sas_ss_size;
-
- /*
- * ATPCS B01 mandates 8-byte alignment
- */
- frame = (void __user *)((sp - framesize) & ~7);
-
- /*
- * Check that we can actually write to the signal frame.
- */
- if (!access_ok(frame, framesize))
- frame = NULL;
-
- return frame;
-}
-
-static int setup_return(struct pt_regs *regs, struct k_sigaction *ka,
- unsigned long __user *rc, void __user *frame, int usig)
-{
- unsigned long handler = (unsigned long)ka->sa.sa_handler;
- unsigned long retcode;
- unsigned long asr = regs->UCreg_asr & ~PSR_f;
-
- unsigned int idx = 0;
-
- if (ka->sa.sa_flags & SA_SIGINFO)
- idx += 1;
-
- if (__put_user(sigreturn_codes[idx], rc) ||
- __put_user(sigreturn_codes[idx+1], rc+1))
- return 1;
-
- retcode = KERN_SIGRETURN_CODE + (idx << 2);
-
- regs->UCreg_00 = usig;
- regs->UCreg_sp = (unsigned long)frame;
- regs->UCreg_lr = retcode;
- regs->UCreg_pc = handler;
- regs->UCreg_asr = asr;
-
- return 0;
-}
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct sigframe __user *frame = get_sigframe(&ksig->ka, regs, sizeof(*frame));
- int err = 0;
-
- if (!frame)
- return 1;
-
- /*
- * Set uc.uc_flags to a value which sc.trap_no would never have.
- */
- err |= __put_user(0x5ac3c35a, &frame->uc.uc_flags);
-
- err |= setup_sigframe(frame, regs, set);
- if (err == 0)
- err |= setup_return(regs, &ksig->ka, frame->retcode, frame,
- ksig->sig);
-
- return err;
-}
-
-static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
- struct pt_regs *regs)
-{
- struct rt_sigframe __user *frame =
- get_sigframe(&ksig->ka, regs, sizeof(*frame));
- int err = 0;
-
- if (!frame)
- return 1;
-
- err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
- err |= __put_user(0, &frame->sig.uc.uc_flags);
- err |= __put_user(NULL, &frame->sig.uc.uc_link);
- err |= __save_altstack(&frame->sig.uc.uc_stack, regs->UCreg_sp);
- err |= setup_sigframe(&frame->sig, regs, set);
- if (err == 0)
- err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame,
- ksig->sig);
-
- if (err == 0) {
- /*
- * For realtime signals we must also set the second and third
- * arguments for the signal handler.
- */
- regs->UCreg_01 = (unsigned long)&frame->info;
- regs->UCreg_02 = (unsigned long)&frame->sig.uc;
- }
-
- return err;
-}
-
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
- regs->UCreg_00 = regs->UCreg_ORIG_00;
- regs->UCreg_pc -= 4;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void handle_signal(struct ksignal *ksig, struct pt_regs *regs,
- int syscall)
-{
- struct thread_info *thread = current_thread_info();
- sigset_t *oldset = sigmask_to_save();
- int usig = ksig->sig;
- int ret;
-
- /*
- * If we were from a system call, check for system call restarting...
- */
- if (syscall) {
- switch (regs->UCreg_00) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->UCreg_00 = -EINTR;
- break;
- case -ERESTARTSYS:
- if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
- regs->UCreg_00 = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- setup_syscall_restart(regs);
- }
- }
-
- /*
- * Set up the stack frame
- */
- if (ksig->ka.sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(ksig, oldset, regs);
- else
- ret = setup_frame(ksig, oldset, regs);
-
- /*
- * Check that the resulting registers are actually sane.
- */
- ret |= !valid_user_regs(regs);
-
- signal_setup_done(ret, ksig, 0);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs, int syscall)
-{
- struct ksignal ksig;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if (!user_mode(regs))
- return;
-
- if (get_signal(&ksig)) {
- handle_signal(&ksig, regs, syscall);
- return;
- }
-
- /*
- * No signal to deliver to the process - restart the syscall.
- */
- if (syscall) {
- if (regs->UCreg_00 == -ERESTART_RESTARTBLOCK) {
- u32 __user *usp;
-
- regs->UCreg_sp -= 4;
- usp = (u32 __user *)regs->UCreg_sp;
-
- if (put_user(regs->UCreg_pc, usp) == 0) {
- regs->UCreg_pc = KERN_RESTART_CODE;
- } else {
- regs->UCreg_sp += 4;
- force_sigsegv(0);
- }
- }
- if (regs->UCreg_00 == -ERESTARTNOHAND ||
- regs->UCreg_00 == -ERESTARTSYS ||
- regs->UCreg_00 == -ERESTARTNOINTR) {
- setup_syscall_restart(regs);
- }
- }
- /* If there's no signal to deliver, we just put the saved
- * sigmask back.
- */
- restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs,
- unsigned int thread_flags, int syscall)
-{
- if (thread_flags & _TIF_SIGPENDING)
- do_signal(regs, syscall);
-
- if (thread_flags & _TIF_NOTIFY_RESUME) {
- clear_thread_flag(TIF_NOTIFY_RESUME);
- tracehook_notify_resume(regs);
- }
-}
-
-/*
- * Copy signal return handlers into the vector page, and
- * set sigreturn to be a pointer to these.
- */
-void __init early_signal_init(void)
-{
- memcpy((void *)kuser_vecpage_to_vectors(KERN_SIGRETURN_CODE),
- sigreturn_codes, sizeof(sigreturn_codes));
- memcpy((void *)kuser_vecpage_to_vectors(KERN_RESTART_CODE),
- syscall_restart_code, sizeof(syscall_restart_code));
- /* Need not to flush icache, since early_trap_init will do it last. */
-}
diff --git a/arch/unicore32/kernel/sleep.S b/arch/unicore32/kernel/sleep.S
deleted file mode 100644
index 23151abe53c6..000000000000
--- a/arch/unicore32/kernel/sleep.S
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/sleep.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
- .text
-
-pkunity_cpu_save_cp:
-
- @ get coprocessor registers
-
- movc r3, p0.c7, #0 @ PID
- movc r4, p0.c2, #0 @ translation table base addr
- movc r5, p0.c1, #0 @ control reg
-
-
- @ store them plus current virtual stack ptr on stack
- mov r6, sp
- stm.w (r3 - r6), [sp-]
-
- mov pc, lr
-
-pkunity_cpu_save_sp:
- @ preserve phys address of stack
- mov r0, sp
- stw.w lr, [sp+], #-4
- b.l sleep_phys_sp
- ldw r1, =sleep_save_sp
- stw r0, [r1]
- ldw.w pc, [sp]+, #4
-
-/*
- * puv3_cpu_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-
-ENTRY(puv3_cpu_suspend)
- stm.w (r16 - r27, lr), [sp-] @ save registers on stack
- stm.w (r4 - r15), [sp-] @ save registers on stack
-
-#ifdef CONFIG_UNICORE_FPU_F64
- sfm.w (f0 - f7 ), [sp-]
- sfm.w (f8 - f15), [sp-]
- sfm.w (f16 - f23), [sp-]
- sfm.w (f24 - f31), [sp-]
- cff r4, s31
- stm.w (r4), [sp-]
-#endif
- b.l pkunity_cpu_save_cp
-
- b.l pkunity_cpu_save_sp
-
- @ clean data cache
- mov r1, #0
- movc p0.c5, r1, #14
- nop
- nop
- nop
- nop
-
-
-
- @ DDR2 BaseAddr
- ldw r0, =(PKUNITY_DDR2CTRL_BASE)
-
- @ PM BaseAddr
- ldw r1, =(PKUNITY_PM_BASE)
-
- @ set PLL_SYS_CFG reg, 275
- movl r6, #0x00002401
- stw r6, [r1+], #0x18
- @ set PLL_DDR_CFG reg, 66MHz
- movl r6, #0x00100c00
- stw r6, [r1+], #0x1c
-
- @ set wake up source
- movl r8, #0x800001ff @ epip4d
- stw r8, [r1+], #0xc
-
- @ set PGSR
- movl r5, #0x40000
- stw r5, [r1+], #0x10
-
- @ prepare DDR2 refresh settings
- ldw r5, [r0+], #0x24
- or r5, r5, #0x00000001
-
- @ prepare PMCR for PLL changing
- movl r6, #0xc
-
- @ prepare for closing PLL
- movl r7, #0x1
-
- @ prepare sleep mode
- mov r8, #0x1
-
-@ movl r0, 0x11111111
-@ put_word_ocd r0
- b pkunity_cpu_do_suspend
-
- .ltorg
- .align 5
-pkunity_cpu_do_suspend:
- b 101f
- @ put DDR2 into self-refresh
-100: stw r5, [r0+], #0x24
- @ change PLL
- stw r6, [r1]
- b 1f
-
- .ltorg
- .align 5
-101: b 102f
- @ wait for PLL changing complete
-1: ldw r6, [r1+], #0x44
- csub.a r6, #0x1
- bne 1b
- b 2f
-
- .ltorg
- .align 5
-102: b 100b
- @ close PLL
-2: stw r7, [r1+], #0x4
- @ enter sleep mode
- stw r8, [r1]
-3: b 3b
-
-
-
-
-/*
- * puv3_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- * This is to allow sleep_save_sp to be accessed with a relative load
- * while we can't rely on any MMU translation. We could have put
- * sleep_save_sp in the .text section as well, but some setups might
- * insist on it to be truly read-only.
- */
-
- .data
- .align 5
-ENTRY(puv3_cpu_resume)
-@ movl r0, 0x20202020
-@ put_word_ocd r0
-
- ldw r0, sleep_save_sp @ stack phys addr
- ldw r2, =resume_after_mmu @ its absolute virtual address
- ldm (r3 - r6), [r0]+ @ CP regs + virt stack ptr
- mov sp, r6 @ CP regs + virt stack ptr
-
- mov r1, #0
- movc p0.c6, r1, #6 @ invalidate I & D TLBs
- movc p0.c5, r1, #28 @ invalidate I & D caches, BTB
-
- movc p0.c7, r3, #0 @ PID
- movc p0.c2, r4, #0 @ translation table base addr
- movc p0.c1, r5, #0 @ control reg, turn on mmu
- nop
- jump r2
- nop
- nop
- nop
- nop
- nop
-
-sleep_save_sp:
- .word 0 @ preserve stack phys ptr here
-
- .text
-resume_after_mmu:
-@ movl r0, 0x30303030
-@ put_word_ocd r0
-
-#ifdef CONFIG_UNICORE_FPU_F64
- lfm.w (f0 - f7 ), [sp]+
- lfm.w (f8 - f15), [sp]+
- lfm.w (f16 - f23), [sp]+
- lfm.w (f24 - f31), [sp]+
- ldm.w (r4), [sp]+
- ctf r4, s31
-#endif
- ldm.w (r4 - r15), [sp]+ @ restore registers from stack
- ldm.w (r16 - r27, pc), [sp]+ @ return to caller
diff --git a/arch/unicore32/kernel/stacktrace.c b/arch/unicore32/kernel/stacktrace.c
deleted file mode 100644
index c9d8650e9d78..000000000000
--- a/arch/unicore32/kernel/stacktrace.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/stacktrace.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/stacktrace.h>
-
-#include <asm/stacktrace.h>
-
-#if defined(CONFIG_FRAME_POINTER)
-/*
- * Unwind the current stack frame and store the new register values in the
- * structure passed as argument. Unwinding is equivalent to a function return,
- * hence the new PC value rather than LR should be used for backtrace.
- *
- * With framepointer enabled, a simple function prologue looks like this:
- * mov ip, sp
- * stmdb sp!, {fp, ip, lr, pc}
- * sub fp, ip, #4
- *
- * A simple function epilogue looks like this:
- * ldm sp, {fp, sp, pc}
- *
- * Note that with framepointer enabled, even the leaf functions have the same
- * prologue and epilogue, therefore we can ignore the LR value in this case.
- */
-int notrace unwind_frame(struct stackframe *frame)
-{
- unsigned long high, low;
- unsigned long fp = frame->fp;
-
- /* only go to a higher address on the stack */
- low = frame->sp;
- high = ALIGN(low, THREAD_SIZE);
-
- /* check current frame pointer is within bounds */
- if (fp < (low + 12) || fp + 4 >= high)
- return -EINVAL;
-
- /* restore the registers from the stack frame */
- frame->fp = *(unsigned long *)(fp - 12);
- frame->sp = *(unsigned long *)(fp - 8);
- frame->pc = *(unsigned long *)(fp - 4);
-
- return 0;
-}
-#endif
-
-void notrace walk_stackframe(struct stackframe *frame,
- int (*fn)(struct stackframe *, void *), void *data)
-{
- while (1) {
- int ret;
-
- if (fn(frame, data))
- break;
- ret = unwind_frame(frame);
- if (ret < 0)
- break;
- }
-}
-EXPORT_SYMBOL(walk_stackframe);
-
-#ifdef CONFIG_STACKTRACE
-struct stack_trace_data {
- struct stack_trace *trace;
- unsigned int no_sched_functions;
- unsigned int skip;
-};
-
-static int save_trace(struct stackframe *frame, void *d)
-{
- struct stack_trace_data *data = d;
- struct stack_trace *trace = data->trace;
- unsigned long addr = frame->pc;
-
- if (data->no_sched_functions && in_sched_functions(addr))
- return 0;
- if (data->skip) {
- data->skip--;
- return 0;
- }
-
- trace->entries[trace->nr_entries++] = addr;
-
- return trace->nr_entries >= trace->max_entries;
-}
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
- struct stack_trace_data data;
- struct stackframe frame;
-
- data.trace = trace;
- data.skip = trace->skip;
-
- if (tsk != current) {
- data.no_sched_functions = 1;
- frame.fp = thread_saved_fp(tsk);
- frame.sp = thread_saved_sp(tsk);
- frame.lr = 0; /* recovered from the stack */
- frame.pc = thread_saved_pc(tsk);
- } else {
- register unsigned long current_sp asm("sp");
-
- data.no_sched_functions = 0;
- frame.fp = (unsigned long)__builtin_frame_address(0);
- frame.sp = current_sp;
- frame.lr = (unsigned long)__builtin_return_address(0);
- frame.pc = (unsigned long)save_stack_trace_tsk;
- }
-
- walk_stackframe(&frame, save_trace, &data);
-}
-
-void save_stack_trace(struct stack_trace *trace)
-{
- save_stack_trace_tsk(current, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-#endif
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
deleted file mode 100644
index 256fb4082296..000000000000
--- a/arch/unicore32/kernel/sys.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/sys.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/ipc.h>
-#include <linux/uaccess.h>
-
-#include <asm/syscalls.h>
-#include <asm/cacheflush.h>
-
-/* Provide the actual syscall number to call mapping. */
-#undef __SYSCALL
-#define __SYSCALL(nr, call) [nr] = (call),
-
-#define sys_mmap2 sys_mmap_pgoff
-/* Note that we don't include <linux/unistd.h> but <asm/unistd.h> */
-void *sys_call_table[__NR_syscalls] = {
- [0 ... __NR_syscalls-1] = sys_ni_syscall,
-#include <asm/unistd.h>
-};
diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
deleted file mode 100644
index c3a37edf4d40..000000000000
--- a/arch/unicore32/kernel/time.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/time.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- * Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-
-#include <mach/hardware.h>
-
-#define MIN_OSCR_DELTA 2
-
-static irqreturn_t puv3_ost0_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *c = dev_id;
-
- /* Disarm the compare/match, signal the event. */
- writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
- writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
- c->event_handler(c);
-
- return IRQ_HANDLED;
-}
-
-static int
-puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
-{
- unsigned long next, oscr;
-
- writel(readl(OST_OIER) | OST_OIER_E0, OST_OIER);
- next = readl(OST_OSCR) + delta;
- writel(next, OST_OSMR0);
- oscr = readl(OST_OSCR);
-
- return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
-}
-
-static int puv3_osmr0_shutdown(struct clock_event_device *evt)
-{
- writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
- writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
- return 0;
-}
-
-static struct clock_event_device ckevt_puv3_osmr0 = {
- .name = "osmr0",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .set_next_event = puv3_osmr0_set_next_event,
- .set_state_shutdown = puv3_osmr0_shutdown,
- .set_state_oneshot = puv3_osmr0_shutdown,
-};
-
-static u64 puv3_read_oscr(struct clocksource *cs)
-{
- return readl(OST_OSCR);
-}
-
-static struct clocksource cksrc_puv3_oscr = {
- .name = "oscr",
- .rating = 200,
- .read = puv3_read_oscr,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init time_init(void)
-{
- writel(0, OST_OIER); /* disable any timer interrupts */
- writel(0, OST_OSSR); /* clear status on all timers */
-
- clockevents_calc_mult_shift(&ckevt_puv3_osmr0, CLOCK_TICK_RATE, 5);
-
- ckevt_puv3_osmr0.max_delta_ns =
- clockevent_delta2ns(0x7fffffff, &ckevt_puv3_osmr0);
- ckevt_puv3_osmr0.max_delta_ticks = 0x7fffffff;
- ckevt_puv3_osmr0.min_delta_ns =
- clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_puv3_osmr0) + 1;
- ckevt_puv3_osmr0.min_delta_ticks = MIN_OSCR_DELTA * 2;
- ckevt_puv3_osmr0.cpumask = cpumask_of(0);
-
- if (request_irq(IRQ_TIMER0, puv3_ost0_interrupt,
- IRQF_TIMER | IRQF_IRQPOLL, "ost0", &ckevt_puv3_osmr0))
- pr_err("Failed to register ost0 interrupt\n");
-
- clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE);
- clockevents_register_device(&ckevt_puv3_osmr0);
-}
-
-#ifdef CONFIG_PM
-unsigned long osmr[4], oier;
-
-void puv3_timer_suspend(void)
-{
- osmr[0] = readl(OST_OSMR0);
- osmr[1] = readl(OST_OSMR1);
- osmr[2] = readl(OST_OSMR2);
- osmr[3] = readl(OST_OSMR3);
- oier = readl(OST_OIER);
-}
-
-void puv3_timer_resume(void)
-{
- writel(0, OST_OSSR);
- writel(osmr[0], OST_OSMR0);
- writel(osmr[1], OST_OSMR1);
- writel(osmr[2], OST_OSMR2);
- writel(osmr[3], OST_OSMR3);
- writel(oier, OST_OIER);
-
- /*
- * OSMR0 is the system timer: make sure OSCR is sufficiently behind
- */
- writel(readl(OST_OSMR0) - LATCH, OST_OSCR);
-}
-#else
-void puv3_timer_suspend(void) { };
-void puv3_timer_resume(void) { };
-#endif
-
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
deleted file mode 100644
index a3ac01df1a2e..000000000000
--- a/arch/unicore32/kernel/traps.c
+++ /dev/null
@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/traps.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * 'traps.c' handles hardware exceptions after we have saved some state.
- * Mostly a debugging aid, but will probably kill the offending process.
- */
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/spinlock.h>
-#include <linux/personality.h>
-#include <linux/kallsyms.h>
-#include <linux/kdebug.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/atomic.h>
-#include <linux/unistd.h>
-
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-#include "setup.h"
-
-static void dump_mem(const char *, const char *, unsigned long, unsigned long);
-
-void dump_backtrace_entry(unsigned long where,
- unsigned long from, unsigned long frame)
-{
-#ifdef CONFIG_KALLSYMS
- printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n",
- where, (void *)where, from, (void *)from);
-#else
- printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n",
- where, from);
-#endif
-}
-
-/*
- * Stack pointers should always be within the kernels view of
- * physical memory. If it is not there, then we can't dump
- * out any information relating to the stack.
- */
-static int verify_stack(unsigned long sp)
-{
- if (sp < PAGE_OFFSET ||
- (sp > (unsigned long)high_memory && high_memory != NULL))
- return -EFAULT;
-
- return 0;
-}
-
-/*
- * Dump out the contents of some memory nicely...
- */
-static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
- unsigned long top)
-{
- unsigned long first;
- mm_segment_t fs;
- int i;
-
- /*
- * We need to switch to kernel mode so that we can use __get_user
- * to safely read from kernel space. Note that we now dump the
- * code first, just in case the backtrace kills us.
- */
- fs = get_fs();
- set_fs(KERNEL_DS);
-
- printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n",
- lvl, str, bottom, top);
-
- for (first = bottom & ~31; first < top; first += 32) {
- unsigned long p;
- char str[sizeof(" 12345678") * 8 + 1];
-
- memset(str, ' ', sizeof(str));
- str[sizeof(str) - 1] = '\0';
-
- for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
- if (p >= bottom && p < top) {
- unsigned long val;
- if (__get_user(val, (unsigned long *)p) == 0)
- sprintf(str + i * 9, " %08lx", val);
- else
- sprintf(str + i * 9, " ????????");
- }
- }
- printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str);
- }
-
- set_fs(fs);
-}
-
-static void dump_instr(const char *lvl, struct pt_regs *regs)
-{
- unsigned long addr = instruction_pointer(regs);
- const int width = 8;
- mm_segment_t fs;
- char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
- int i;
-
- /*
- * We need to switch to kernel mode so that we can use __get_user
- * to safely read from kernel space. Note that we now dump the
- * code first, just in case the backtrace kills us.
- */
- fs = get_fs();
- set_fs(KERNEL_DS);
-
- for (i = -4; i < 1; i++) {
- unsigned int val, bad;
-
- bad = __get_user(val, &((u32 *)addr)[i]);
-
- if (!bad)
- p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
- width, val);
- else {
- p += sprintf(p, "bad PC value");
- break;
- }
- }
- printk(KERN_DEFAULT "%sCode: %s\n", lvl, str);
-
- set_fs(fs);
-}
-
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
- const char *loglvl)
-{
- unsigned int fp;
- int ok = 1;
-
- printk("%sBacktrace: ", loglvl);
-
- if (!tsk)
- tsk = current;
-
- if (regs)
- fp = regs->UCreg_fp;
- else if (tsk != current)
- fp = thread_saved_fp(tsk);
- else
- asm("mov %0, fp" : "=r" (fp) : : "cc");
-
- if (!fp) {
- printk("%sno frame pointer", loglvl);
- ok = 0;
- } else if (verify_stack(fp)) {
- printk("%sinvalid frame pointer 0x%08x", loglvl, fp);
- ok = 0;
- } else if (fp < (unsigned long)end_of_stack(tsk))
- printk("%sframe pointer underflow", loglvl);
- printk("%s\n", loglvl);
-
- if (ok)
- c_backtrace(fp, loglvl);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp,
- const char *loglvl)
-{
- dump_backtrace(NULL, tsk, loglvl);
- barrier();
-}
-
-static int __die(const char *str, int err, struct thread_info *thread,
- struct pt_regs *regs)
-{
- struct task_struct *tsk = thread->task;
- static int die_counter;
- int ret;
-
- printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
- str, err, ++die_counter);
-
- /* trap and error numbers are mostly meaningless on UniCore */
- ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
- SIGSEGV);
- if (ret == NOTIFY_STOP)
- return ret;
-
- print_modules();
- __show_regs(regs);
- printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
- TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
-
- if (!user_mode(regs) || in_interrupt()) {
- dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp,
- THREAD_SIZE + (unsigned long)task_stack_page(tsk));
- dump_backtrace(regs, tsk, KERN_EMERG);
- dump_instr(KERN_EMERG, regs);
- }
-
- return ret;
-}
-
-DEFINE_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-void die(const char *str, struct pt_regs *regs, int err)
-{
- struct thread_info *thread = current_thread_info();
- int ret;
-
- oops_enter();
-
- spin_lock_irq(&die_lock);
- console_verbose();
- bust_spinlocks(1);
- ret = __die(str, err, thread, regs);
-
- bust_spinlocks(0);
- add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
- spin_unlock_irq(&die_lock);
- oops_exit();
-
- if (in_interrupt())
- panic("Fatal exception in interrupt");
- if (panic_on_oops)
- panic("Fatal exception");
- if (ret != NOTIFY_STOP)
- do_exit(SIGSEGV);
-}
-
-void uc32_notify_die(const char *str, struct pt_regs *regs,
- int sig, int code, void __user *addr,
- unsigned long err, unsigned long trap)
-{
- if (user_mode(regs)) {
- current->thread.error_code = err;
- current->thread.trap_no = trap;
-
- force_sig_fault(sig, code, addr);
- } else
- die(str, regs, err);
-}
-
-/*
- * bad_mode handles the impossible case in the vectors. If you see one of
- * these, then it's extremely serious, and could mean you have buggy hardware.
- * It never returns, and never tries to sync. We hope that we can at least
- * dump out some state information...
- */
-asmlinkage void bad_mode(struct pt_regs *regs, unsigned int reason)
-{
- console_verbose();
-
- printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason);
-
- die("Oops - bad mode", regs, 0);
- local_irq_disable();
- panic("bad mode");
-}
-
-void __pte_error(const char *file, int line, unsigned long val)
-{
- printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val);
-}
-
-void __pmd_error(const char *file, int line, unsigned long val)
-{
- printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val);
-}
-
-void __pgd_error(const char *file, int line, unsigned long val)
-{
- printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val);
-}
-
-asmlinkage void __div0(void)
-{
- printk(KERN_DEFAULT "Division by zero in kernel.\n");
- dump_stack();
-}
-EXPORT_SYMBOL(__div0);
-
-void abort(void)
-{
- BUG();
-
- /* if that doesn't kill us, halt */
- panic("Oops failed to kill thread");
-}
-
-void __init trap_init(void)
-{
- return;
-}
-
-void __init early_trap_init(void)
-{
- unsigned long vectors = VECTORS_BASE;
-
- /*
- * Copy the vectors, stubs (in entry-unicore.S)
- * into the vector page, mapped at 0xffff0000, and ensure these
- * are visible to the instruction stream.
- */
- memcpy((void *)vectors,
- __vectors_start,
- __vectors_end - __vectors_start);
- memcpy((void *)vectors + 0x200,
- __stubs_start,
- __stubs_end - __stubs_start);
-
- early_signal_init();
-
- flush_icache_range(vectors, vectors + PAGE_SIZE);
-}
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
deleted file mode 100644
index 6fb320b337ef..000000000000
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/vmlinux.lds.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-OUTPUT_ARCH(unicore32)
-ENTRY(stext)
-
-jiffies = jiffies_64;
-
-SECTIONS
-{
- . = PAGE_OFFSET + KERNEL_IMAGE_START;
-
- _text = .;
- __init_begin = .;
- HEAD_TEXT_SECTION
- INIT_TEXT_SECTION(PAGE_SIZE)
- INIT_DATA_SECTION(16)
- PERCPU_SECTION(L1_CACHE_BYTES)
- __init_end = .;
-
- _stext = .;
- .text : { /* Real text segment */
- TEXT_TEXT
- SCHED_TEXT
- CPUIDLE_TEXT
- LOCK_TEXT
-
- *(.fixup)
- *(.gnu.warning)
- }
- _etext = .;
-
- _sdata = .;
- RO_DATA(PAGE_SIZE)
- RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
- _edata = .;
-
- EXCEPTION_TABLE(L1_CACHE_BYTES)
-
- BSS_SECTION(0, 0, 0)
- _end = .;
-
- STABS_DEBUG
- DWARF_DEBUG
-
- DISCARDS /* Exit code and data */
-}
diff --git a/arch/unicore32/lib/Makefile b/arch/unicore32/lib/Makefile
deleted file mode 100644
index 5af06645b8f0..000000000000
--- a/arch/unicore32/lib/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/unicore32/lib/Makefile
-#
-# Copyright (C) 2001-2010 GUAN Xue-tao
-#
-
-lib-y := backtrace.o delay.o findbit.o
-lib-y += strncpy_from_user.o strnlen_user.o
-lib-y += clear_user.o copy_page.o
-lib-y += copy_from_user.o copy_to_user.o
-
-GNU_LIBC_A = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libc.a)
-GNU_LIBC_A_OBJS := memchr.o memcpy.o memmove.o memset.o
-GNU_LIBC_A_OBJS += strchr.o strrchr.o
-GNU_LIBC_A_OBJS += rawmemchr.o # needed by strrchr.o
-
-GNU_LIBGCC_A = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a)
-GNU_LIBGCC_A_OBJS := _ashldi3.o _ashrdi3.o _lshrdi3.o
-GNU_LIBGCC_A_OBJS += _divsi3.o _modsi3.o _ucmpdi2.o _umodsi3.o _udivsi3.o
-
-lib-y += $(GNU_LIBC_A_OBJS) $(GNU_LIBGCC_A_OBJS)
-
-$(addprefix $(obj)/, $(GNU_LIBC_A_OBJS)):
- $(Q)$(AR) p $(GNU_LIBC_A) $(notdir $@) > $@
-
-$(addprefix $(obj)/, $(GNU_LIBGCC_A_OBJS)):
- $(Q)$(AR) p $(GNU_LIBGCC_A) $(notdir $@) > $@
diff --git a/arch/unicore32/lib/backtrace.S b/arch/unicore32/lib/backtrace.S
deleted file mode 100644
index 6221944b81f3..000000000000
--- a/arch/unicore32/lib/backtrace.S
+++ /dev/null
@@ -1,168 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/backtrace.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
- .text
-
-@ fp is 0 or stack frame
-
-#define frame v4
-#define sv_fp v5
-#define sv_pc v6
-#define offset v8
-#define loglvl v9
-
-ENTRY(__backtrace)
- mov r0, fp
-
-ENTRY(c_backtrace)
-
-#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
- mov pc, lr
-ENDPROC(__backtrace)
-ENDPROC(c_backtrace)
-#else
- stm.w (v4 - v10, lr), [sp-] @ Save an extra register
- @ so we have a location...
- mov.a frame, r0 @ if frame pointer is zero
- beq no_frame @ we have no stack frames
- mov loglvl, r1
-
-1: stm.w (pc), [sp-] @ calculate offset of PC stored
- ldw.w r0, [sp]+, #4 @ by stmfd for this CPU
- adr r1, 1b
- sub offset, r0, r1
-
-/*
- * Stack frame layout:
- * optionally saved caller registers (r4 - r10)
- * saved fp
- * saved sp
- * saved lr
- * frame => saved pc
- * optionally saved arguments (r0 - r3)
- * saved sp => <next word>
- *
- * Functions start with the following code sequence:
- * mov ip, sp
- * stm.w (r0 - r3), [sp-] (optional)
- * corrected pc => stm.w sp, (..., fp, ip, lr, pc)
- */
-for_each_frame:
-
-1001: ldw sv_pc, [frame+], #0 @ get saved pc
-1002: ldw sv_fp, [frame+], #-12 @ get saved fp
-
- sub sv_pc, sv_pc, offset @ Correct PC for prefetching
-
-1003: ldw r2, [sv_pc+], #-4 @ if stmfd sp, {args} exists,
- ldw r3, .Ldsi+4 @ adjust saved 'pc' back one
- cxor.a r3, r2 >> #14 @ instruction
- beq 201f
- sub r0, sv_pc, #4 @ allow for mov
- b 202f
-201:
- sub r0, sv_pc, #8 @ allow for mov + stmia
-202:
- ldw r1, [frame+], #-4 @ get saved lr
- mov r2, frame
- b.l dump_backtrace_entry
-
- ldw r1, [sv_pc+], #-4 @ if stmfd sp, {args} exists,
- ldw r3, .Ldsi+4
- cxor.a r3, r1 >> #14
- bne 1004f
- ldw r0, [frame+], #-8 @ get sp
- sub r0, r0, #4 @ point at the last arg
- b.l .Ldumpstm @ dump saved registers
-
-1004: ldw r1, [sv_pc+], #0 @ if stmfd {, fp, ip, lr, pc}
- ldw r3, .Ldsi @ instruction exists,
- cxor.a r3, r1 >> #14
- bne 201f
- sub r0, frame, #16
- b.l .Ldumpstm @ dump saved registers
-201:
- cxor.a sv_fp, #0 @ zero saved fp means
- beq no_frame @ no further frames
-
- csub.a sv_fp, frame @ next frame must be
- mov frame, sv_fp @ above the current frame
- bua for_each_frame
-
-1006: adr r0, .Lbad
- mov r1, loglvl
- mov r2, frame
- b.l printk
-no_frame: ldm.w (v4 - v10, pc), [sp]+
-ENDPROC(__backtrace)
-ENDPROC(c_backtrace)
-
- .pushsection __ex_table,"a"
- .align 3
- .long 1001b, 1006b
- .long 1002b, 1006b
- .long 1003b, 1006b
- .long 1004b, 1006b
- .popsection
-
-#define instr v4
-#define reg v5
-#define stack v6
-
-.Ldumpstm: stm.w (instr, reg, stack, v7, lr), [sp-]
- mov stack, r0
- mov instr, r1
- mov reg, #14
- mov v7, #0
-1: mov r3, #1
- csub.a reg, #8
- bne 201f
- sub reg, reg, #3
-201:
- cand.a instr, r3 << reg
- beq 2f
- add v7, v7, #1
- cxor.a v7, #6
- cmoveq v7, #1
- bne 201f
- adr r0, .Lcr
- mov r1, loglvl
- b.l printk
-201:
- ldw.w r3, [stack]+, #-4
- mov r2, reg
- csub.a r2, #8
- bsl 201f
- sub r2, r2, #3
-201:
- cand.a instr, #0x40 @ if H is 1, high 16 regs
- beq 201f
- add r2, r2, #0x10 @ so r2 need add 16
-201:
- adr r0, .Lfp
- mov r1, loglvl
- b.l printk
-2: sub.a reg, reg, #1
- bns 1b
- cxor.a v7, #0
- beq 201f
- adr r0, .Lcr
- mov r1, loglvl
- b.l printk
-201: ldm.w (instr, reg, stack, v7, pc), [sp]+
-
-.Lfp: .asciz "%sr%d:%08x "
-.Lcr: .asciz "%s\n"
-.Lbad: .asciz "%sBacktrace aborted due to bad frame pointer <%p>\n"
- .align
-.Ldsi: .word 0x92eec000 >> 14 @ stm.w sp, (... fp, ip, lr, pc)
- .word 0x92e10000 >> 14 @ stm.w sp, ()
-
-#endif
diff --git a/arch/unicore32/lib/clear_user.S b/arch/unicore32/lib/clear_user.S
deleted file mode 100644
index c6ca431b1090..000000000000
--- a/arch/unicore32/lib/clear_user.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/clear_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
- .text
-
-/* Prototype: int __clear_user(void *addr, size_t sz)
- * Purpose : clear some user memory
- * Params : addr - user memory address to clear
- * : sz - number of bytes to clear
- * Returns : number of bytes NOT cleared
- */
-WEAK(__clear_user)
- stm.w (lr), [sp-]
- stm.w (r1), [sp-]
- mov r2, #0
- csub.a r1, #4
- bsl 2f
- and.a ip, r0, #3
- beq 1f
- csub.a ip, #2
- strusr r2, r0, 1
- strusr r2, r0, 1, el
- strusr r2, r0, 1, sl
- rsub ip, ip, #4
- sub r1, r1, ip @ 7 6 5 4 3 2 1
-1: sub.a r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
- strusr r2, r0, 4, ns, rept=2
- bns 1b
- add.a r1, r1, #4 @ 3 2 1 0 -1 -2 -3
- strusr r2, r0, 4, ns
-2: cand.a r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
- strusr r2, r0, 1, ne, rept=2
- cand.a r1, #1 @ x1 x0 x1 x0 x1 x0 x1
- beq 3f
-USER( stb.u r2, [r0])
-3: mov r0, #0
- ldm.w (r1), [sp]+
- ldm.w (pc), [sp]+
-ENDPROC(__clear_user)
-
- .pushsection .fixup,"ax"
- .align 0
-9001: ldm.w (r0), [sp]+
- ldm.w (pc), [sp]+
- .popsection
-
diff --git a/arch/unicore32/lib/copy_from_user.S b/arch/unicore32/lib/copy_from_user.S
deleted file mode 100644
index affb43920ac0..000000000000
--- a/arch/unicore32/lib/copy_from_user.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_from_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Prototype:
- *
- * size_t raw_copy_from_user(void *to, const void *from, size_t n)
- *
- * Purpose:
- *
- * copy a block to kernel memory from user memory
- *
- * Params:
- *
- * to = kernel memory
- * from = user memory
- * n = number of bytes to copy
- *
- * Return value:
- *
- * Number of bytes NOT copied.
- */
-
- .macro ldr1w ptr reg abort
- ldrusr \reg, \ptr, 4, abort=\abort
- .endm
-
- .macro ldr4w ptr reg1 reg2 reg3 reg4 abort
-100: ldm.w (\reg1, \reg2, \reg3, \reg4), [\ptr]+
- .pushsection __ex_table, "a"
- .align 3
- .long 100b, \abort
- .popsection
- .endm
-
- .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-100: ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
- .pushsection __ex_table, "a"
- .align 3
- .long 100b, \abort
- .popsection
- .endm
-
- .macro ldr1b ptr reg cond=al abort
- ldrusr \reg, \ptr, 1, \cond, abort=\abort
- .endm
-
- .macro str1w ptr reg abort
- stw.w \reg, [\ptr]+, #4
- .endm
-
- .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
- .endm
-
- .macro str1b ptr reg cond=al abort
- .ifnc \cond, al
- b\cond 201f
- b 202f
- .endif
-201: stb.w \reg, [\ptr]+, #1
-202:
- .endm
-
- .macro enter
- mov r3, #0
- stm.w (r0, r2, r3), [sp-]
- .endm
-
- .macro exit
- add sp, sp, #8
- ldm.w (r0), [sp]+
- mov pc, lr
- .endm
-
- .text
-
-ENTRY(raw_copy_from_user)
-
-#include "copy_template.S"
-
-ENDPROC(raw_copy_from_user)
-
- .pushsection .fixup,"ax"
- .align 0
- copy_abort_preamble
- ldm.w (r1, r2, r3), [sp]+
- sub r0, r0, r1
- rsub r0, r0, r2
- copy_abort_end
- .popsection
-
diff --git a/arch/unicore32/lib/copy_page.S b/arch/unicore32/lib/copy_page.S
deleted file mode 100644
index dc163f2d1af0..000000000000
--- a/arch/unicore32/lib/copy_page.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_page.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <generated/asm-offsets.h>
-#include <asm/cache.h>
-
-#define COPY_COUNT (PAGE_SZ/256)
-
- .text
- .align 5
-/*
- * UniCore optimised copy_page routine
- */
-ENTRY(copy_page)
- stm.w (r17 - r19, lr), [sp-]
- mov r17, r0
- mov r18, r1
- mov r19, #COPY_COUNT
-1:
- .rept 4
- ldm.w (r0 - r15), [r18]+
- stm.w (r0 - r15), [r17]+
- .endr
- sub.a r19, r19, #1
- bne 1b
- ldm.w (r17 - r19, pc), [sp]+
-ENDPROC(copy_page)
diff --git a/arch/unicore32/lib/copy_template.S b/arch/unicore32/lib/copy_template.S
deleted file mode 100644
index 02a7aef83fbf..000000000000
--- a/arch/unicore32/lib/copy_template.S
+++ /dev/null
@@ -1,211 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_template.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-/*
- * Theory of operation
- * -------------------
- *
- * This file provides the core code for a forward memory copy used in
- * the implementation of memcopy(), copy_to_user() and copy_from_user().
- *
- * The including file must define the following accessor macros
- * according to the need of the given function:
- *
- * ldr1w ptr reg abort
- *
- * This loads one word from 'ptr', stores it in 'reg' and increments
- * 'ptr' to the next word. The 'abort' argument is used for fixup tables.
- *
- * ldr4w ptr reg1 reg2 reg3 reg4 abort
- * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- *
- * This loads four or eight words starting from 'ptr', stores them
- * in provided registers and increments 'ptr' past those words.
- * The'abort' argument is used for fixup tables.
- *
- * ldr1b ptr reg cond abort
- *
- * Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
- * It also must apply the condition code if provided, otherwise the
- * "al" condition is assumed by default.
- *
- * str1w ptr reg abort
- * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- * str1b ptr reg cond abort
- *
- * Same as their ldr* counterparts, but data is stored to 'ptr' location
- * rather than being loaded.
- *
- * enter
- *
- * Preserve the provided registers on the stack plus any additional
- * data as needed by the implementation including this code. Called
- * upon code entry.
- *
- * exit
- *
- * Restore registers with the values previously saved with the
- * 'preserv' macro. Called upon code termination.
- */
-
-
- enter
-
- sub.a r2, r2, #4
- bsl 8f
- and.a ip, r0, #3
- bne 9f
- and.a ip, r1, #3
- bne 10f
-
-1: sub.a r2, r2, #(28)
- stm.w (r5 - r8), [sp-]
- bsl 5f
-
-3:
-4: ldr8w r1, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
- sub.a r2, r2, #32
- str8w r0, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
- beg 3b
-
-5: and.a ip, r2, #28
- rsub ip, ip, #32
- beq 7f
- add pc, pc, ip @ C is always clear here
- nop
-
- ldr1w r1, r3, abort=20f
- ldr1w r1, r4, abort=20f
- ldr1w r1, r5, abort=20f
- ldr1w r1, r6, abort=20f
- ldr1w r1, r7, abort=20f
- ldr1w r1, r8, abort=20f
- ldr1w r1, r11, abort=20f
-
- add pc, pc, ip
- nop
-
- str1w r0, r3, abort=20f
- str1w r0, r4, abort=20f
- str1w r0, r5, abort=20f
- str1w r0, r6, abort=20f
- str1w r0, r7, abort=20f
- str1w r0, r8, abort=20f
- str1w r0, r11, abort=20f
-
-7: ldm.w (r5 - r8), [sp]+
-
-8: mov.a r2, r2 << #31
- ldr1b r1, r3, ne, abort=21f
- ldr1b r1, r4, ea, abort=21f
- ldr1b r1, r10, ea, abort=21f
- str1b r0, r3, ne, abort=21f
- str1b r0, r4, ea, abort=21f
- str1b r0, r10, ea, abort=21f
-
- exit
-
-9: rsub ip, ip, #4
- csub.a ip, #2
- ldr1b r1, r3, sg, abort=21f
- ldr1b r1, r4, eg, abort=21f
- ldr1b r1, r11, abort=21f
- str1b r0, r3, sg, abort=21f
- str1b r0, r4, eg, abort=21f
- sub.a r2, r2, ip
- str1b r0, r11, abort=21f
- bsl 8b
- and.a ip, r1, #3
- beq 1b
-
-10: andn r1, r1, #3
- csub.a ip, #2
- ldr1w r1, r11, abort=21f
- beq 17f
- bsg 18f
-
-
- .macro forward_copy_shift a b
-
- sub.a r2, r2, #28
- bsl 14f
-
-11: stm.w (r5 - r9), [sp-]
-
-12:
- ldr4w r1, r4, r5, r6, r7, abort=19f
- mov r3, r11 pull #\a
- sub.a r2, r2, #32
- ldr4w r1, r8, r9, r10, r11, abort=19f
- or r3, r3, r4 push #\b
- mov r4, r4 pull #\a
- or r4, r4, r5 push #\b
- mov r5, r5 pull #\a
- or r5, r5, r6 push #\b
- mov r6, r6 pull #\a
- or r6, r6, r7 push #\b
- mov r7, r7 pull #\a
- or r7, r7, r8 push #\b
- mov r8, r8 pull #\a
- or r8, r8, r9 push #\b
- mov r9, r9 pull #\a
- or r9, r9, r10 push #\b
- mov r10, r10 pull #\a
- or r10, r10, r11 push #\b
- str8w r0, r3, r4, r5, r6, r7, r8, r9, r10, , abort=19f
- beg 12b
-
- ldm.w (r5 - r9), [sp]+
-
-14: and.a ip, r2, #28
- beq 16f
-
-15: mov r3, r11 pull #\a
- ldr1w r1, r11, abort=21f
- sub.a ip, ip, #4
- or r3, r3, r11 push #\b
- str1w r0, r3, abort=21f
- bsg 15b
-
-16: sub r1, r1, #(\b / 8)
- b 8b
-
- .endm
-
-
- forward_copy_shift a=8 b=24
-
-17: forward_copy_shift a=16 b=16
-
-18: forward_copy_shift a=24 b=8
-
-
-/*
- * Abort preamble and completion macros.
- * If a fixup handler is required then those macros must surround it.
- * It is assumed that the fixup code will handle the private part of
- * the exit macro.
- */
-
- .macro copy_abort_preamble
-19: ldm.w (r5 - r9), [sp]+
- b 21f
-299: .word 0 @ store lr
- @ to avoid function call in fixup
-20: ldm.w (r5 - r8), [sp]+
-21:
- adr r1, 299b
- stw lr, [r1]
- .endm
-
- .macro copy_abort_end
- adr lr, 299b
- ldw pc, [lr]
- .endm
-
diff --git a/arch/unicore32/lib/copy_to_user.S b/arch/unicore32/lib/copy_to_user.S
deleted file mode 100644
index c867f08f89ce..000000000000
--- a/arch/unicore32/lib/copy_to_user.S
+++ /dev/null
@@ -1,93 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_to_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Prototype:
- *
- * size_t raw_copy_to_user(void *to, const void *from, size_t n)
- *
- * Purpose:
- *
- * copy a block to user memory from kernel memory
- *
- * Params:
- *
- * to = user memory
- * from = kernel memory
- * n = number of bytes to copy
- *
- * Return value:
- *
- * Number of bytes NOT copied.
- */
-
- .macro ldr1w ptr reg abort
- ldw.w \reg, [\ptr]+, #4
- .endm
-
- .macro ldr4w ptr reg1 reg2 reg3 reg4 abort
- ldm.w (\reg1, \reg2, \reg3, \reg4), [\ptr]+
- .endm
-
- .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
- .endm
-
- .macro ldr1b ptr reg cond=al abort
- notcond \cond, .+8
- ldb.w \reg, [\ptr]+, #1
- .endm
-
- .macro str1w ptr reg abort
- strusr \reg, \ptr, 4, abort=\abort
- .endm
-
- .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-100: stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
-
- .pushsection __ex_table, "a"
- .long 100b, \abort
- .popsection
- .endm
-
- .macro str1b ptr reg cond=al abort
- strusr \reg, \ptr, 1, \cond, abort=\abort
- .endm
-
- .macro enter
- mov r3, #0
- stm.w (r0, r2, r3), [sp-]
- .endm
-
- .macro exit
- add sp, sp, #8
- ldm.w (r0), [sp]+
- mov pc, lr
- .endm
-
- .text
-
-WEAK(raw_copy_to_user)
-
-#include "copy_template.S"
-
-ENDPROC(raw_copy_to_user)
-
- .pushsection .fixup,"ax"
- .align 0
- copy_abort_preamble
- ldm.w (r1, r2, r3), [sp]+
- sub r0, r0, r1
- rsub r0, r0, r2
- copy_abort_end
- .popsection
-
diff --git a/arch/unicore32/lib/delay.S b/arch/unicore32/lib/delay.S
deleted file mode 100644
index 6a359dd034e5..000000000000
--- a/arch/unicore32/lib/delay.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/delay.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/param.h>
- .text
-
-.LC0: .word loops_per_jiffy
-.LC1: .word (2199023*HZ)>>11
-
-/*
- * r0 <= 2000
- * lpj <= 0x01ffffff (max. 3355 bogomips)
- * HZ <= 1000
- */
-
-ENTRY(__udelay)
- ldw r2, .LC1
- mul r0, r2, r0
-ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
- ldw r2, .LC0
- ldw r2, [r2] @ max = 0x01ffffff
- mov r0, r0 >> #14 @ max = 0x0001ffff
- mov r2, r2 >> #10 @ max = 0x00007fff
- mul r0, r2, r0 @ max = 2^32-1
- mov.a r0, r0 >> #6
- cmoveq pc, lr
-
-/*
- * loops = r0 * HZ * loops_per_jiffy / 1000000
- *
- * Oh, if only we had a cycle counter...
- */
-
-@ Delay routine
-ENTRY(__delay)
- sub.a r0, r0, #2
- bua __delay
- mov pc, lr
-ENDPROC(__udelay)
-ENDPROC(__const_udelay)
-ENDPROC(__delay)
diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S
deleted file mode 100644
index 42f1282670d2..000000000000
--- a/arch/unicore32/lib/findbit.S
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/findbit.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
- .text
-
-/*
- * Purpose : Find a 'zero' bit
- * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
- */
-ENTRY(find_first_zero_bit)
- cxor.a r1, #0
- beq 3f
- mov r2, #0
-1: ldb r3, [r0+], r2 >> #3
- xor.a r3, r3, #0xff @ invert bits
- bne .L_found @ any now set - found zero bit
- add r2, r2, #8 @ next bit pointer
-2: csub.a r2, r1 @ any more?
- bub 1b
-3: mov r0, r1 @ no free bits
- mov pc, lr
-ENDPROC(find_first_zero_bit)
-
-/*
- * Purpose : Find next 'zero' bit
- * Prototype: int find_next_zero_bit
- * (void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(find_next_zero_bit)
- cxor.a r1, #0
- beq 3b
- and.a ip, r2, #7
- beq 1b @ If new byte, goto old routine
- ldb r3, [r0+], r2 >> #3
- xor r3, r3, #0xff @ now looking for a 1 bit
- mov.a r3, r3 >> ip @ shift off unused bits
- bne .L_found
- or r2, r2, #7 @ if zero, then no bits here
- add r2, r2, #1 @ align bit pointer
- b 2b @ loop for next bit
-ENDPROC(find_next_zero_bit)
-
-/*
- * Purpose : Find a 'one' bit
- * Prototype: int find_first_bit
- * (const unsigned long *addr, unsigned int maxbit);
- */
-ENTRY(find_first_bit)
- cxor.a r1, #0
- beq 3f
- mov r2, #0
-1: ldb r3, [r0+], r2 >> #3
- mov.a r3, r3
- bne .L_found @ any now set - found zero bit
- add r2, r2, #8 @ next bit pointer
-2: csub.a r2, r1 @ any more?
- bub 1b
-3: mov r0, r1 @ no free bits
- mov pc, lr
-ENDPROC(find_first_bit)
-
-/*
- * Purpose : Find next 'one' bit
- * Prototype: int find_next_zero_bit
- * (void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(find_next_bit)
- cxor.a r1, #0
- beq 3b
- and.a ip, r2, #7
- beq 1b @ If new byte, goto old routine
- ldb r3, [r0+], r2 >> #3
- mov.a r3, r3 >> ip @ shift off unused bits
- bne .L_found
- or r2, r2, #7 @ if zero, then no bits here
- add r2, r2, #1 @ align bit pointer
- b 2b @ loop for next bit
-ENDPROC(find_next_bit)
-
-/*
- * One or more bits in the LSB of r3 are assumed to be set.
- */
-.L_found:
- rsub r1, r3, #0
- and r3, r3, r1
- cntlz r3, r3
- rsub r3, r3, #31
- add r0, r2, r3
- mov pc, lr
-
diff --git a/arch/unicore32/lib/strncpy_from_user.S b/arch/unicore32/lib/strncpy_from_user.S
deleted file mode 100644
index f227b8227a4c..000000000000
--- a/arch/unicore32/lib/strncpy_from_user.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/strncpy_from_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
- .text
- .align 5
-
-/*
- * Copy a string from user space to kernel space.
- * r0 = dst, r1 = src, r2 = byte length
- * returns the number of characters copied (strlen of copied string),
- * -EFAULT on exception, or "len" if we fill the whole buffer
- */
-ENTRY(__strncpy_from_user)
- mov ip, r1
-1: sub.a r2, r2, #1
- ldrusr r3, r1, 1, ns
- bfs 2f
- stb.w r3, [r0]+, #1
- cxor.a r3, #0
- bne 1b
- sub r1, r1, #1 @ take NUL character out of count
-2: sub r0, r1, ip
- mov pc, lr
-ENDPROC(__strncpy_from_user)
-
- .pushsection .fixup,"ax"
- .align 0
-9001: mov r3, #0
- stb r3, [r0+], #0 @ null terminate
- mov r0, #-EFAULT
- mov pc, lr
- .popsection
-
diff --git a/arch/unicore32/lib/strnlen_user.S b/arch/unicore32/lib/strnlen_user.S
deleted file mode 100644
index c836b12776fe..000000000000
--- a/arch/unicore32/lib/strnlen_user.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/strnlen_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
- .text
- .align 5
-
-/* Prototype: unsigned long __strnlen_user(const char *str, long n)
- * Purpose : get length of a string in user memory
- * Params : str - address of string in user memory
- * Returns : length of string *including terminator*
- * or zero on exception, or n + 1 if too long
- */
-ENTRY(__strnlen_user)
- mov r2, r0
-1:
- ldrusr r3, r0, 1
- cxor.a r3, #0
- beq 2f
- sub.a r1, r1, #1
- bne 1b
- add r0, r0, #1
-2: sub r0, r0, r2
- mov pc, lr
-ENDPROC(__strnlen_user)
-
- .pushsection .fixup,"ax"
- .align 0
-9001: mov r0, #0
- mov pc, lr
- .popsection
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
deleted file mode 100644
index 82759b6aba67..000000000000
--- a/arch/unicore32/mm/Kconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-comment "Processor Type"
-
-# Select CPU types depending on the architecture selected. This selects
-# which CPUs we support in the kernel image, and the compiler instruction
-# optimiser behaviour.
-
-config CPU_UCV2
- def_bool y
-
-comment "Processor Features"
-
-config CPU_ICACHE_DISABLE
- bool "Disable I-Cache (I-bit)"
- help
- Say Y here to disable the processor instruction cache. Unless
- you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_DISABLE
- bool "Disable D-Cache (D-bit)"
- help
- Say Y here to disable the processor data cache. Unless
- you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_WRITETHROUGH
- bool "Force write through D-cache"
- help
- Say Y here to use the data cache in writethrough mode. Unless you
- specifically require this or are unsure, say N.
-
-config CPU_DCACHE_LINE_DISABLE
- bool "Disable D-cache line ops"
- default y
- help
- Say Y here to disable the data cache line operations.
-
-config CPU_TLB_SINGLE_ENTRY_DISABLE
- bool "Disable TLB single entry ops"
- default y
- help
- Say Y here to disable the TLB single entry operations.
diff --git a/arch/unicore32/mm/Makefile b/arch/unicore32/mm/Makefile
deleted file mode 100644
index 8106260583ab..000000000000
--- a/arch/unicore32/mm/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux unicore-specific parts of the memory manager.
-#
-
-obj-y := extable.o fault.o init.o pgd.o mmu.o
-obj-y += flush.o ioremap.o
-
-obj-$(CONFIG_MODULES) += proc-syms.o
-
-obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
-
-obj-$(CONFIG_CPU_UCV2) += cache-ucv2.o tlb-ucv2.o proc-ucv2.o
-
diff --git a/arch/unicore32/mm/alignment.c b/arch/unicore32/mm/alignment.c
deleted file mode 100644
index 2ea98f7a4156..000000000000
--- a/arch/unicore32/mm/alignment.c
+++ /dev/null
@@ -1,524 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/alignment.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-/*
- * TODO:
- * FPU ldm/stm not handling
- */
-#include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/sched/debug.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/uaccess.h>
-#include <linux/pgtable.h>
-
-#include <asm/tlbflush.h>
-#include <asm/unaligned.h>
-
-#include "mm.h"
-
-#define CODING_BITS(i) (i & 0xe0000120)
-
-#define LDST_P_BIT(i) (i & (1 << 28)) /* Preindex */
-#define LDST_U_BIT(i) (i & (1 << 27)) /* Add offset */
-#define LDST_W_BIT(i) (i & (1 << 25)) /* Writeback */
-#define LDST_L_BIT(i) (i & (1 << 24)) /* Load */
-
-#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 27)) == 0)
-
-#define LDSTH_I_BIT(i) (i & (1 << 26)) /* half-word immed */
-#define LDM_S_BIT(i) (i & (1 << 26)) /* write ASR from BSR */
-#define LDM_H_BIT(i) (i & (1 << 6)) /* select r0-r15 or r16-r31 */
-
-#define RN_BITS(i) ((i >> 19) & 31) /* Rn */
-#define RD_BITS(i) ((i >> 14) & 31) /* Rd */
-#define RM_BITS(i) (i & 31) /* Rm */
-
-#define REGMASK_BITS(i) (((i & 0x7fe00) >> 3) | (i & 0x3f))
-#define OFFSET_BITS(i) (i & 0x03fff)
-
-#define SHIFT_BITS(i) ((i >> 9) & 0x1f)
-#define SHIFT_TYPE(i) (i & 0xc0)
-#define SHIFT_LSL 0x00
-#define SHIFT_LSR 0x40
-#define SHIFT_ASR 0x80
-#define SHIFT_RORRRX 0xc0
-
-union offset_union {
- unsigned long un;
- signed long sn;
-};
-
-#define TYPE_ERROR 0
-#define TYPE_FAULT 1
-#define TYPE_LDST 2
-#define TYPE_DONE 3
-#define TYPE_SWAP 4
-#define TYPE_COLS 5 /* Coprocessor load/store */
-
-#define get8_unaligned_check(val, addr, err) \
- __asm__( \
- "1: ldb.u %1, [%2], #1\n" \
- "2:\n" \
- " .pushsection .fixup,\"ax\"\n" \
- " .align 2\n" \
- "3: mov %0, #1\n" \
- " b 2b\n" \
- " .popsection\n" \
- " .pushsection __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 3b\n" \
- " .popsection\n" \
- : "=r" (err), "=&r" (val), "=r" (addr) \
- : "0" (err), "2" (addr))
-
-#define get8t_unaligned_check(val, addr, err) \
- __asm__( \
- "1: ldb.u %1, [%2], #1\n" \
- "2:\n" \
- " .pushsection .fixup,\"ax\"\n" \
- " .align 2\n" \
- "3: mov %0, #1\n" \
- " b 2b\n" \
- " .popsection\n" \
- " .pushsection __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 3b\n" \
- " .popsection\n" \
- : "=r" (err), "=&r" (val), "=r" (addr) \
- : "0" (err), "2" (addr))
-
-#define get16_unaligned_check(val, addr) \
- do { \
- unsigned int err = 0, v, a = addr; \
- get8_unaligned_check(val, a, err); \
- get8_unaligned_check(v, a, err); \
- val |= v << 8; \
- if (err) \
- goto fault; \
- } while (0)
-
-#define put16_unaligned_check(val, addr) \
- do { \
- unsigned int err = 0, v = val, a = addr; \
- __asm__( \
- "1: stb.u %1, [%2], #1\n" \
- " mov %1, %1 >> #8\n" \
- "2: stb.u %1, [%2]\n" \
- "3:\n" \
- " .pushsection .fixup,\"ax\"\n" \
- " .align 2\n" \
- "4: mov %0, #1\n" \
- " b 3b\n" \
- " .popsection\n" \
- " .pushsection __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 4b\n" \
- " .long 2b, 4b\n" \
- " .popsection\n" \
- : "=r" (err), "=&r" (v), "=&r" (a) \
- : "0" (err), "1" (v), "2" (a)); \
- if (err) \
- goto fault; \
- } while (0)
-
-#define __put32_unaligned_check(ins, val, addr) \
- do { \
- unsigned int err = 0, v = val, a = addr; \
- __asm__( \
- "1: "ins" %1, [%2], #1\n" \
- " mov %1, %1 >> #8\n" \
- "2: "ins" %1, [%2], #1\n" \
- " mov %1, %1 >> #8\n" \
- "3: "ins" %1, [%2], #1\n" \
- " mov %1, %1 >> #8\n" \
- "4: "ins" %1, [%2]\n" \
- "5:\n" \
- " .pushsection .fixup,\"ax\"\n" \
- " .align 2\n" \
- "6: mov %0, #1\n" \
- " b 5b\n" \
- " .popsection\n" \
- " .pushsection __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 6b\n" \
- " .long 2b, 6b\n" \
- " .long 3b, 6b\n" \
- " .long 4b, 6b\n" \
- " .popsection\n" \
- : "=r" (err), "=&r" (v), "=&r" (a) \
- : "0" (err), "1" (v), "2" (a)); \
- if (err) \
- goto fault; \
- } while (0)
-
-#define get32_unaligned_check(val, addr) \
- do { \
- unsigned int err = 0, v, a = addr; \
- get8_unaligned_check(val, a, err); \
- get8_unaligned_check(v, a, err); \
- val |= v << 8; \
- get8_unaligned_check(v, a, err); \
- val |= v << 16; \
- get8_unaligned_check(v, a, err); \
- val |= v << 24; \
- if (err) \
- goto fault; \
- } while (0)
-
-#define put32_unaligned_check(val, addr) \
- __put32_unaligned_check("stb.u", val, addr)
-
-#define get32t_unaligned_check(val, addr) \
- do { \
- unsigned int err = 0, v, a = addr; \
- get8t_unaligned_check(val, a, err); \
- get8t_unaligned_check(v, a, err); \
- val |= v << 8; \
- get8t_unaligned_check(v, a, err); \
- val |= v << 16; \
- get8t_unaligned_check(v, a, err); \
- val |= v << 24; \
- if (err) \
- goto fault; \
- } while (0)
-
-#define put32t_unaligned_check(val, addr) \
- __put32_unaligned_check("stb.u", val, addr)
-
-static void
-do_alignment_finish_ldst(unsigned long addr, unsigned long instr,
- struct pt_regs *regs, union offset_union offset)
-{
- if (!LDST_U_BIT(instr))
- offset.un = -offset.un;
-
- if (!LDST_P_BIT(instr))
- addr += offset.un;
-
- if (!LDST_P_BIT(instr) || LDST_W_BIT(instr))
- regs->uregs[RN_BITS(instr)] = addr;
-}
-
-static int
-do_alignment_ldrhstrh(unsigned long addr, unsigned long instr,
- struct pt_regs *regs)
-{
- unsigned int rd = RD_BITS(instr);
-
- /* old value 0x40002120, can't judge swap instr correctly */
- if ((instr & 0x4b003fe0) == 0x40000120)
- goto swp;
-
- if (LDST_L_BIT(instr)) {
- unsigned long val;
- get16_unaligned_check(val, addr);
-
- /* signed half-word? */
- if (instr & 0x80)
- val = (signed long)((signed short)val);
-
- regs->uregs[rd] = val;
- } else
- put16_unaligned_check(regs->uregs[rd], addr);
-
- return TYPE_LDST;
-
-swp:
- /* only handle swap word
- * for swap byte should not active this alignment exception */
- get32_unaligned_check(regs->uregs[RD_BITS(instr)], addr);
- put32_unaligned_check(regs->uregs[RM_BITS(instr)], addr);
- return TYPE_SWAP;
-
-fault:
- return TYPE_FAULT;
-}
-
-static int
-do_alignment_ldrstr(unsigned long addr, unsigned long instr,
- struct pt_regs *regs)
-{
- unsigned int rd = RD_BITS(instr);
-
- if (!LDST_P_BIT(instr) && LDST_W_BIT(instr))
- goto trans;
-
- if (LDST_L_BIT(instr))
- get32_unaligned_check(regs->uregs[rd], addr);
- else
- put32_unaligned_check(regs->uregs[rd], addr);
- return TYPE_LDST;
-
-trans:
- if (LDST_L_BIT(instr))
- get32t_unaligned_check(regs->uregs[rd], addr);
- else
- put32t_unaligned_check(regs->uregs[rd], addr);
- return TYPE_LDST;
-
-fault:
- return TYPE_FAULT;
-}
-
-/*
- * LDM/STM alignment handler.
- *
- * There are 4 variants of this instruction:
- *
- * B = rn pointer before instruction, A = rn pointer after instruction
- * ------ increasing address ----->
- * | | r0 | r1 | ... | rx | |
- * PU = 01 B A
- * PU = 11 B A
- * PU = 00 A B
- * PU = 10 A B
- */
-static int
-do_alignment_ldmstm(unsigned long addr, unsigned long instr,
- struct pt_regs *regs)
-{
- unsigned int rd, rn, pc_correction, reg_correction, nr_regs, regbits;
- unsigned long eaddr, newaddr;
-
- if (LDM_S_BIT(instr))
- goto bad;
-
- pc_correction = 4; /* processor implementation defined */
-
- /* count the number of registers in the mask to be transferred */
- nr_regs = hweight16(REGMASK_BITS(instr)) * 4;
-
- rn = RN_BITS(instr);
- newaddr = eaddr = regs->uregs[rn];
-
- if (!LDST_U_BIT(instr))
- nr_regs = -nr_regs;
- newaddr += nr_regs;
- if (!LDST_U_BIT(instr))
- eaddr = newaddr;
-
- if (LDST_P_EQ_U(instr)) /* U = P */
- eaddr += 4;
-
- /*
- * This is a "hint" - we already have eaddr worked out by the
- * processor for us.
- */
- if (addr != eaddr) {
- printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, "
- "addr = %08lx, eaddr = %08lx\n",
- instruction_pointer(regs), instr, addr, eaddr);
- show_regs(regs);
- }
-
- if (LDM_H_BIT(instr))
- reg_correction = 0x10;
- else
- reg_correction = 0x00;
-
- for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
- regbits >>= 1, rd += 1)
- if (regbits & 1) {
- if (LDST_L_BIT(instr))
- get32_unaligned_check(regs->
- uregs[rd + reg_correction], eaddr);
- else
- put32_unaligned_check(regs->
- uregs[rd + reg_correction], eaddr);
- eaddr += 4;
- }
-
- if (LDST_W_BIT(instr))
- regs->uregs[rn] = newaddr;
- return TYPE_DONE;
-
-fault:
- regs->UCreg_pc -= pc_correction;
- return TYPE_FAULT;
-
-bad:
- printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n");
- return TYPE_ERROR;
-}
-
-static int
-do_alignment(unsigned long addr, unsigned int error_code, struct pt_regs *regs)
-{
- union offset_union offset;
- unsigned long instr, instrptr;
- int (*handler) (unsigned long addr, unsigned long instr,
- struct pt_regs *regs);
- unsigned int type;
-
- instrptr = instruction_pointer(regs);
- if (instrptr >= PAGE_OFFSET)
- instr = *(unsigned long *)instrptr;
- else {
- __asm__ __volatile__(
- "ldw.u %0, [%1]\n"
- : "=&r"(instr)
- : "r"(instrptr));
- }
-
- regs->UCreg_pc += 4;
-
- switch (CODING_BITS(instr)) {
- case 0x40000120: /* ldrh or strh */
- if (LDSTH_I_BIT(instr))
- offset.un = (instr & 0x3e00) >> 4 | (instr & 31);
- else
- offset.un = regs->uregs[RM_BITS(instr)];
- handler = do_alignment_ldrhstrh;
- break;
-
- case 0x60000000: /* ldr or str immediate */
- case 0x60000100: /* ldr or str immediate */
- case 0x60000020: /* ldr or str immediate */
- case 0x60000120: /* ldr or str immediate */
- offset.un = OFFSET_BITS(instr);
- handler = do_alignment_ldrstr;
- break;
-
- case 0x40000000: /* ldr or str register */
- offset.un = regs->uregs[RM_BITS(instr)];
- {
- unsigned int shiftval = SHIFT_BITS(instr);
-
- switch (SHIFT_TYPE(instr)) {
- case SHIFT_LSL:
- offset.un <<= shiftval;
- break;
-
- case SHIFT_LSR:
- offset.un >>= shiftval;
- break;
-
- case SHIFT_ASR:
- offset.sn >>= shiftval;
- break;
-
- case SHIFT_RORRRX:
- if (shiftval == 0) {
- offset.un >>= 1;
- if (regs->UCreg_asr & PSR_C_BIT)
- offset.un |= 1 << 31;
- } else
- offset.un = offset.un >> shiftval |
- offset.un << (32 - shiftval);
- break;
- }
- }
- handler = do_alignment_ldrstr;
- break;
-
- case 0x80000000: /* ldm or stm */
- case 0x80000020: /* ldm or stm */
- handler = do_alignment_ldmstm;
- break;
-
- default:
- goto bad;
- }
-
- type = handler(addr, instr, regs);
-
- if (type == TYPE_ERROR || type == TYPE_FAULT)
- goto bad_or_fault;
-
- if (type == TYPE_LDST)
- do_alignment_finish_ldst(addr, instr, regs, offset);
-
- return 0;
-
-bad_or_fault:
- if (type == TYPE_ERROR)
- goto bad;
- regs->UCreg_pc -= 4;
- /*
- * We got a fault - fix it up, or die.
- */
- do_bad_area(addr, error_code, regs);
- return 0;
-
-bad:
- /*
- * Oops, we didn't handle the instruction.
- * However, we must handle fpu instr firstly.
- */
-#ifdef CONFIG_UNICORE_FPU_F64
- /* handle co.load/store */
-#define CODING_COLS 0xc0000000
-#define COLS_OFFSET_BITS(i) (i & 0x1FF)
-#define COLS_L_BITS(i) (i & (1<<24))
-#define COLS_FN_BITS(i) ((i>>14) & 31)
- if ((instr & 0xe0000000) == CODING_COLS) {
- unsigned int fn = COLS_FN_BITS(instr);
- unsigned long val = 0;
- if (COLS_L_BITS(instr)) {
- get32t_unaligned_check(val, addr);
- switch (fn) {
-#define ASM_MTF(n) case n: \
- __asm__ __volatile__("MTF %0, F" __stringify(n) \
- : : "r"(val)); \
- break;
- ASM_MTF(0); ASM_MTF(1); ASM_MTF(2); ASM_MTF(3);
- ASM_MTF(4); ASM_MTF(5); ASM_MTF(6); ASM_MTF(7);
- ASM_MTF(8); ASM_MTF(9); ASM_MTF(10); ASM_MTF(11);
- ASM_MTF(12); ASM_MTF(13); ASM_MTF(14); ASM_MTF(15);
- ASM_MTF(16); ASM_MTF(17); ASM_MTF(18); ASM_MTF(19);
- ASM_MTF(20); ASM_MTF(21); ASM_MTF(22); ASM_MTF(23);
- ASM_MTF(24); ASM_MTF(25); ASM_MTF(26); ASM_MTF(27);
- ASM_MTF(28); ASM_MTF(29); ASM_MTF(30); ASM_MTF(31);
-#undef ASM_MTF
- }
- } else {
- switch (fn) {
-#define ASM_MFF(n) case n: \
- __asm__ __volatile__("MFF %0, F" __stringify(n) \
- : : "r"(val)); \
- break;
- ASM_MFF(0); ASM_MFF(1); ASM_MFF(2); ASM_MFF(3);
- ASM_MFF(4); ASM_MFF(5); ASM_MFF(6); ASM_MFF(7);
- ASM_MFF(8); ASM_MFF(9); ASM_MFF(10); ASM_MFF(11);
- ASM_MFF(12); ASM_MFF(13); ASM_MFF(14); ASM_MFF(15);
- ASM_MFF(16); ASM_MFF(17); ASM_MFF(18); ASM_MFF(19);
- ASM_MFF(20); ASM_MFF(21); ASM_MFF(22); ASM_MFF(23);
- ASM_MFF(24); ASM_MFF(25); ASM_MFF(26); ASM_MFF(27);
- ASM_MFF(28); ASM_MFF(29); ASM_MFF(30); ASM_MFF(31);
-#undef ASM_MFF
- }
- put32t_unaligned_check(val, addr);
- }
- return TYPE_COLS;
- }
-fault:
- return TYPE_FAULT;
-#endif
- printk(KERN_ERR "Alignment trap: not handling instruction "
- "%08lx at [<%08lx>]\n", instr, instrptr);
- return 1;
-}
-
-/*
- * This needs to be done after sysctl_init, otherwise sys/ will be
- * overwritten. Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- */
-static int __init alignment_init(void)
-{
- hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
- "alignment exception");
-
- return 0;
-}
-
-fs_initcall(alignment_init);
diff --git a/arch/unicore32/mm/cache-ucv2.S b/arch/unicore32/mm/cache-ucv2.S
deleted file mode 100644
index 2108837d6f4f..000000000000
--- a/arch/unicore32/mm/cache-ucv2.S
+++ /dev/null
@@ -1,209 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/cache-ucv2.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This is the "shell" of the UniCore-v2 processor support.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/page.h>
-
-#include "proc-macros.S"
-
-/*
- * __cpuc_flush_icache_all()
- * __cpuc_flush_kern_all()
- * __cpuc_flush_user_all()
- *
- * Flush the entire cache.
- */
-ENTRY(__cpuc_flush_icache_all)
- /*FALLTHROUGH*/
-ENTRY(__cpuc_flush_kern_all)
- /*FALLTHROUGH*/
-ENTRY(__cpuc_flush_user_all)
- mov r0, #0
- movc p0.c5, r0, #14 @ Dcache flush all
- nop8
-
- mov r0, #0
- movc p0.c5, r0, #20 @ Icache invalidate all
- nop8
-
- mov pc, lr
-
-/*
- * __cpuc_flush_user_range(start, end, flags)
- *
- * Flush a range of TLB entries in the specified address space.
- *
- * - start - start address (may not be aligned)
- * - end - end address (exclusive, may not be aligned)
- * - flags - vm_area_struct flags describing address space
- */
-ENTRY(__cpuc_flush_user_range)
- cxor.a r2, #0
- beq __cpuc_dma_flush_range
-
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- andn r0, r0, #CACHE_LINESIZE - 1 @ Safety check
- sub r1, r1, r0
- csub.a r1, #MAX_AREA_SIZE
- bsg 2f
-
- andn r1, r1, #CACHE_LINESIZE - 1
- add r1, r1, #CACHE_LINESIZE
-
-101: dcacheline_flush r0, r11, r12
-
- add r0, r0, #CACHE_LINESIZE
- sub.a r1, r1, #CACHE_LINESIZE
- bns 101b
- b 3f
-#endif
-2: mov ip, #0
- movc p0.c5, ip, #14 @ Dcache flush all
- nop8
-
-3: mov ip, #0
- movc p0.c5, ip, #20 @ Icache invalidate all
- nop8
-
- mov pc, lr
-
-/*
- * __cpuc_coherent_kern_range(start,end)
- * __cpuc_coherent_user_range(start,end)
- *
- * Ensure that the I and D caches are coherent within specified
- * region. This is typically used when code has been written to
- * a memory region, and will be executed.
- *
- * - start - virtual start address of region
- * - end - virtual end address of region
- */
-ENTRY(__cpuc_coherent_kern_range)
- /* FALLTHROUGH */
-ENTRY(__cpuc_coherent_user_range)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- andn r0, r0, #CACHE_LINESIZE - 1 @ Safety check
- sub r1, r1, r0
- csub.a r1, #MAX_AREA_SIZE
- bsg 2f
-
- andn r1, r1, #CACHE_LINESIZE - 1
- add r1, r1, #CACHE_LINESIZE
-
- @ r0 va2pa r10
- mov r9, #PAGE_SZ
- sub r9, r9, #1 @ PAGE_MASK
-101: va2pa r0, r10, r11, r12, r13, 2f @ r10 is PA
- b 103f
-102: cand.a r0, r9
- beq 101b
-
-103: movc p0.c5, r10, #11 @ Dcache clean line of R10
- nop8
-
- add r0, r0, #CACHE_LINESIZE
- add r10, r10, #CACHE_LINESIZE
- sub.a r1, r1, #CACHE_LINESIZE
- bns 102b
- b 3f
-#endif
-2: mov ip, #0
- movc p0.c5, ip, #10 @ Dcache clean all
- nop8
-
-3: mov ip, #0
- movc p0.c5, ip, #20 @ Icache invalidate all
- nop8
-
- mov pc, lr
-
-/*
- * __cpuc_flush_kern_dcache_area(void *addr, size_t size)
- *
- * - addr - kernel address
- * - size - region size
- */
-ENTRY(__cpuc_flush_kern_dcache_area)
- mov ip, #0
- movc p0.c5, ip, #14 @ Dcache flush all
- nop8
- mov pc, lr
-
-/*
- * __cpuc_dma_clean_range(start,end)
- * - start - virtual start address of region
- * - end - virtual end address of region
- */
-ENTRY(__cpuc_dma_clean_range)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- andn r0, r0, #CACHE_LINESIZE - 1
- sub r1, r1, r0
- andn r1, r1, #CACHE_LINESIZE - 1
- add r1, r1, #CACHE_LINESIZE
-
- csub.a r1, #MAX_AREA_SIZE
- bsg 2f
-
- @ r0 va2pa r10
- mov r9, #PAGE_SZ
- sub r9, r9, #1 @ PAGE_MASK
-101: va2pa r0, r10, r11, r12, r13, 2f @ r10 is PA
- b 1f
-102: cand.a r0, r9
- beq 101b
-
-1: movc p0.c5, r10, #11 @ Dcache clean line of R10
- nop8
- add r0, r0, #CACHE_LINESIZE
- add r10, r10, #CACHE_LINESIZE
- sub.a r1, r1, #CACHE_LINESIZE
- bns 102b
- mov pc, lr
-#endif
-2: mov ip, #0
- movc p0.c5, ip, #10 @ Dcache clean all
- nop8
-
- mov pc, lr
-
-/*
- * __cpuc_dma_inv_range(start,end)
- * __cpuc_dma_flush_range(start,end)
- * - start - virtual start address of region
- * - end - virtual end address of region
- */
-__cpuc_dma_inv_range:
- /* FALLTHROUGH */
-ENTRY(__cpuc_dma_flush_range)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- andn r0, r0, #CACHE_LINESIZE - 1
- sub r1, r1, r0
- andn r1, r1, #CACHE_LINESIZE - 1
- add r1, r1, #CACHE_LINESIZE
-
- csub.a r1, #MAX_AREA_SIZE
- bsg 2f
-
- @ r0 va2pa r10
-101: dcacheline_flush r0, r11, r12
-
- add r0, r0, #CACHE_LINESIZE
- sub.a r1, r1, #CACHE_LINESIZE
- bns 101b
- mov pc, lr
-#endif
-2: mov ip, #0
- movc p0.c5, ip, #14 @ Dcache flush all
- nop8
-
- mov pc, lr
-
diff --git a/arch/unicore32/mm/extable.c b/arch/unicore32/mm/extable.c
deleted file mode 100644
index e53352b41c4a..000000000000
--- a/arch/unicore32/mm/extable.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/extable.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-int fixup_exception(struct pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(instruction_pointer(regs));
- if (fixup)
- regs->UCreg_pc = fixup->fixup;
-
- return fixup != NULL;
-}
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
deleted file mode 100644
index 7654bddde133..000000000000
--- a/arch/unicore32/mm/fault.c
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/fault.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/extable.h>
-#include <linux/signal.h>
-#include <linux/mm.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/page-flags.h>
-#include <linux/sched/signal.h>
-#include <linux/io.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Fault status register encodings. We steal bit 31 for our own purposes.
- */
-#define FSR_LNX_PF (1 << 31)
-
-static inline int fsr_fs(unsigned int fsr)
-{
- /* xyabcde will be abcde+xy */
- return (fsr & 31) + ((fsr & (3 << 5)) >> 5);
-}
-
-/*
- * This is useful to dump out the page tables associated with
- * 'addr' in mm 'mm'.
- */
-void show_pte(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pgd;
-
- if (!mm)
- mm = &init_mm;
-
- printk(KERN_ALERT "pgd = %p\n", mm->pgd);
- pgd = pgd_offset(mm, addr);
- printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd));
-
- do {
- pmd_t *pmd;
- pte_t *pte;
-
- if (pgd_none(*pgd))
- break;
-
- if (pgd_bad(*pgd)) {
- printk("(bad)");
- break;
- }
-
- pmd = pmd_offset((pud_t *) pgd, addr);
- if (PTRS_PER_PMD != 1)
- printk(", *pmd=%08lx", pmd_val(*pmd));
-
- if (pmd_none(*pmd))
- break;
-
- if (pmd_bad(*pmd)) {
- printk("(bad)");
- break;
- }
-
- /* We must not map this if we have highmem enabled */
- if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
- break;
-
- pte = pte_offset_map(pmd, addr);
- printk(", *pte=%08lx", pte_val(*pte));
- pte_unmap(pte);
- } while (0);
-
- printk("\n");
-}
-
-/*
- * Oops. The kernel tried to access some page that wasn't present.
- */
-static void __do_kernel_fault(struct mm_struct *mm, unsigned long addr,
- unsigned int fsr, struct pt_regs *regs)
-{
- /*
- * Are we prepared to handle this kernel fault?
- */
- if (fixup_exception(regs))
- return;
-
- /*
- * No handler, we'll have to terminate things with extreme prejudice.
- */
- bust_spinlocks(1);
- printk(KERN_ALERT
- "Unable to handle kernel %s at virtual address %08lx\n",
- (addr < PAGE_SIZE) ? "NULL pointer dereference" :
- "paging request", addr);
-
- show_pte(mm, addr);
- die("Oops", regs, fsr);
- bust_spinlocks(0);
- do_exit(SIGKILL);
-}
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * User mode accesses just cause a SIGSEGV
- */
-static void __do_user_fault(unsigned long addr, unsigned int fsr,
- unsigned int sig, int code, struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
-
- tsk->thread.address = addr;
- tsk->thread.error_code = fsr;
- tsk->thread.trap_no = 14;
- force_sig_fault(sig, code, (void __user *)addr);
-}
-
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- struct task_struct *tsk = current;
- struct mm_struct *mm = tsk->active_mm;
-
- /*
- * If we are in kernel mode at this point, we
- * have no context to handle this fault with.
- */
- if (user_mode(regs))
- __do_user_fault(addr, fsr, SIGSEGV, SEGV_MAPERR, regs);
- else
- __do_kernel_fault(mm, addr, fsr, regs);
-}
-
-#define VM_FAULT_BADMAP 0x010000
-#define VM_FAULT_BADACCESS 0x020000
-
-/*
- * Check that the permissions on the VMA allow for the fault which occurred.
- * If we encountered a write fault, we must have write permission, otherwise
- * we allow any permission.
- */
-static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
-{
- unsigned int mask = VM_ACCESS_FLAGS;
-
- if (!(fsr ^ 0x12)) /* write? */
- mask = VM_WRITE;
- if (fsr & FSR_LNX_PF)
- mask = VM_EXEC;
-
- return vma->vm_flags & mask ? false : true;
-}
-
-static vm_fault_t __do_pf(struct mm_struct *mm, unsigned long addr,
- unsigned int fsr, unsigned int flags, struct task_struct *tsk)
-{
- struct vm_area_struct *vma;
- vm_fault_t fault;
-
- vma = find_vma(mm, addr);
- fault = VM_FAULT_BADMAP;
- if (unlikely(!vma))
- goto out;
- if (unlikely(vma->vm_start > addr))
- goto check_stack;
-
- /*
- * Ok, we have a good vm_area for this
- * memory access, so we can handle it.
- */
-good_area:
- if (access_error(fsr, vma)) {
- fault = VM_FAULT_BADACCESS;
- goto out;
- }
-
- /*
- * If for any reason at all we couldn't handle the fault, make
- * sure we exit gracefully rather than endlessly redo the fault.
- */
- fault = handle_mm_fault(vma, addr & PAGE_MASK, flags);
- return fault;
-
-check_stack:
- if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
- goto good_area;
-out:
- return fault;
-}
-
-static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- struct task_struct *tsk;
- struct mm_struct *mm;
- int sig, code;
- vm_fault_t fault;
- unsigned int flags = FAULT_FLAG_DEFAULT;
-
- tsk = current;
- mm = tsk->mm;
-
- /*
- * If we're in an interrupt or have no user
- * context, we must not take the fault..
- */
- if (faulthandler_disabled() || !mm)
- goto no_context;
-
- if (user_mode(regs))
- flags |= FAULT_FLAG_USER;
- if (!(fsr ^ 0x12))
- flags |= FAULT_FLAG_WRITE;
-
- /*
- * As per x86, we may deadlock here. However, since the kernel only
- * validly references user space from well defined areas of the code,
- * we can bug out early if this is from code which shouldn't.
- */
- if (!mmap_read_trylock(mm)) {
- if (!user_mode(regs)
- && !search_exception_tables(regs->UCreg_pc))
- goto no_context;
-retry:
- mmap_read_lock(mm);
- } else {
- /*
- * The above down_read_trylock() might have succeeded in
- * which case, we'll have missed the might_sleep() from
- * down_read()
- */
- might_sleep();
-#ifdef CONFIG_DEBUG_VM
- if (!user_mode(regs) &&
- !search_exception_tables(regs->UCreg_pc))
- goto no_context;
-#endif
- }
-
- fault = __do_pf(mm, addr, fsr, flags, tsk);
-
- /* If we need to retry but a fatal signal is pending, handle the
- * signal first. We do not need to release the mmap_lock because
- * it would already be released in __lock_page_or_retry in
- * mm/filemap.c. */
- if (fault_signal_pending(fault, regs))
- return 0;
-
- if (!(fault & VM_FAULT_ERROR) && (flags & FAULT_FLAG_ALLOW_RETRY)) {
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
- if (fault & VM_FAULT_RETRY) {
- flags |= FAULT_FLAG_TRIED;
- goto retry;
- }
- }
-
- mmap_read_unlock(mm);
-
- /*
- * Handle the "normal" case first - VM_FAULT_MAJOR
- */
- if (likely(!(fault &
- (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
- return 0;
-
- /*
- * If we are in kernel mode at this point, we
- * have no context to handle this fault with.
- */
- if (!user_mode(regs))
- goto no_context;
-
- if (fault & VM_FAULT_OOM) {
- /*
- * We ran out of memory, call the OOM killer, and return to
- * userspace (which will retry the fault, or kill us if we
- * got oom-killed)
- */
- pagefault_out_of_memory();
- return 0;
- }
-
- if (fault & VM_FAULT_SIGBUS) {
- /*
- * We had some memory, but were unable to
- * successfully fix up this page fault.
- */
- sig = SIGBUS;
- code = BUS_ADRERR;
- } else {
- /*
- * Something tried to access memory that
- * isn't in our memory map..
- */
- sig = SIGSEGV;
- code = fault == VM_FAULT_BADACCESS ? SEGV_ACCERR : SEGV_MAPERR;
- }
-
- __do_user_fault(addr, fsr, sig, code, regs);
- return 0;
-
-no_context:
- __do_kernel_fault(mm, addr, fsr, regs);
- return 0;
-}
-
-/*
- * First Level Translation Fault Handler
- *
- * We enter here because the first level page table doesn't contain
- * a valid entry for the address.
- *
- * If the address is in kernel space (>= TASK_SIZE), then we are
- * probably faulting in the vmalloc() area.
- *
- * If the init_task's first level page tables contains the relevant
- * entry, we copy the it to this task. If not, we send the process
- * a signal, fixup the exception, or oops the kernel.
- *
- * NOTE! We MUST NOT take any locks for this case. We may be in an
- * interrupt or a critical region, and should only copy the information
- * from the master page table, nothing more.
- */
-static int do_ifault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- unsigned int index;
- pgd_t *pgd, *pgd_k;
- pmd_t *pmd, *pmd_k;
-
- if (addr < TASK_SIZE)
- return do_pf(addr, fsr, regs);
-
- if (user_mode(regs))
- goto bad_area;
-
- index = pgd_index(addr);
-
- pgd = cpu_get_pgd() + index;
- pgd_k = init_mm.pgd + index;
-
- if (pgd_none(*pgd_k))
- goto bad_area;
-
- pmd_k = pmd_offset((pud_t *) pgd_k, addr);
- pmd = pmd_offset((pud_t *) pgd, addr);
-
- if (pmd_none(*pmd_k))
- goto bad_area;
-
- set_pmd(pmd, *pmd_k);
- flush_pmd_entry(pmd);
- return 0;
-
-bad_area:
- do_bad_area(addr, fsr, regs);
- return 0;
-}
-
-/*
- * This abort handler always returns "fault".
- */
-static int do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- return 1;
-}
-
-static int do_good(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- unsigned int res1, res2;
-
- printk("dabt exception but no error!\n");
-
- __asm__ __volatile__(
- "mff %0,f0\n"
- "mff %1,f1\n"
- : "=r"(res1), "=r"(res2)
- :
- : "memory");
-
- printk(KERN_EMERG "r0 :%08x r1 :%08x\n", res1, res2);
- panic("shut up\n");
- return 0;
-}
-
-static struct fsr_info {
- int (*fn) (unsigned long addr, unsigned int fsr, struct pt_regs *regs);
- int sig;
- int code;
- const char *name;
-} fsr_info[] = {
- /*
- * The following are the standard Unicore-I and UniCore-II aborts.
- */
- { do_good, SIGBUS, 0, "no error" },
- { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
- { do_bad, SIGBUS, BUS_OBJERR, "external exception" },
- { do_bad, SIGBUS, 0, "burst operation" },
- { do_bad, SIGBUS, 0, "unknown 00100" },
- { do_ifault, SIGSEGV, SEGV_MAPERR, "2nd level pt non-exist"},
- { do_bad, SIGBUS, 0, "2nd lvl large pt non-exist" },
- { do_bad, SIGBUS, 0, "invalid pte" },
- { do_pf, SIGSEGV, SEGV_MAPERR, "page miss" },
- { do_bad, SIGBUS, 0, "middle page miss" },
- { do_bad, SIGBUS, 0, "large page miss" },
- { do_pf, SIGSEGV, SEGV_MAPERR, "super page (section) miss" },
- { do_bad, SIGBUS, 0, "unknown 01100" },
- { do_bad, SIGBUS, 0, "unknown 01101" },
- { do_bad, SIGBUS, 0, "unknown 01110" },
- { do_bad, SIGBUS, 0, "unknown 01111" },
- { do_bad, SIGBUS, 0, "addr: up 3G or IO" },
- { do_pf, SIGSEGV, SEGV_ACCERR, "read unreadable addr" },
- { do_pf, SIGSEGV, SEGV_ACCERR, "write unwriteable addr"},
- { do_pf, SIGSEGV, SEGV_ACCERR, "exec unexecutable addr"},
- { do_bad, SIGBUS, 0, "unknown 10100" },
- { do_bad, SIGBUS, 0, "unknown 10101" },
- { do_bad, SIGBUS, 0, "unknown 10110" },
- { do_bad, SIGBUS, 0, "unknown 10111" },
- { do_bad, SIGBUS, 0, "unknown 11000" },
- { do_bad, SIGBUS, 0, "unknown 11001" },
- { do_bad, SIGBUS, 0, "unknown 11010" },
- { do_bad, SIGBUS, 0, "unknown 11011" },
- { do_bad, SIGBUS, 0, "unknown 11100" },
- { do_bad, SIGBUS, 0, "unknown 11101" },
- { do_bad, SIGBUS, 0, "unknown 11110" },
- { do_bad, SIGBUS, 0, "unknown 11111" }
-};
-
-void __init hook_fault_code(int nr,
- int (*fn) (unsigned long, unsigned int, struct pt_regs *),
- int sig, int code, const char *name)
-{
- if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
- BUG();
-
- fsr_info[nr].fn = fn;
- fsr_info[nr].sig = sig;
- fsr_info[nr].code = code;
- fsr_info[nr].name = name;
-}
-
-/*
- * Dispatch a data abort to the relevant handler.
- */
-asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
-
- if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
- return;
-
- printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
- inf->name, fsr, addr);
-
- uc32_notify_die("", regs, inf->sig, inf->code, (void __user *)addr,
- fsr, 0);
-}
-
-asmlinkage void do_PrefetchAbort(unsigned long addr,
- unsigned int ifsr, struct pt_regs *regs)
-{
- const struct fsr_info *inf = fsr_info + fsr_fs(ifsr);
-
- if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
- return;
-
- printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
- inf->name, ifsr, addr);
-
- uc32_notify_die("", regs, inf->sig, inf->code, (void __user *)addr,
- ifsr, 0);
-}
diff --git a/arch/unicore32/mm/flush.c b/arch/unicore32/mm/flush.c
deleted file mode 100644
index 65954f8d89a2..000000000000
--- a/arch/unicore32/mm/flush.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/flush.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-void flush_cache_mm(struct mm_struct *mm)
-{
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- if (vma->vm_flags & VM_EXEC)
- __flush_icache_all();
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr,
- unsigned long pfn)
-{
-}
-
-static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr, unsigned long len)
-{
- /* VIPT non-aliasing D-cache */
- if (vma->vm_flags & VM_EXEC) {
- unsigned long addr = (unsigned long)kaddr;
-
- __cpuc_coherent_kern_range(addr, addr + len);
- }
-}
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space. Really, we want to allow our "user
- * space" model to handle this.
- *
- * Note that this code needs to run on the current CPU.
- */
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *dst, const void *src,
- unsigned long len)
-{
- memcpy(dst, src, len);
- flush_ptrace_access(vma, page, uaddr, dst, len);
-}
-
-void __flush_dcache_page(struct address_space *mapping, struct page *page)
-{
- /*
- * Writeback any data associated with the kernel mapping of this
- * page. This ensures that data in the physical page is mutually
- * coherent with the kernels mapping.
- */
- __cpuc_flush_kern_dcache_area(page_address(page), PAGE_SIZE);
-}
-
-/*
- * Ensure cache coherency between kernel mapping and userspace mapping
- * of this page.
- */
-void flush_dcache_page(struct page *page)
-{
- struct address_space *mapping;
-
- /*
- * The zero page is never written to, so never has any dirty
- * cache lines, and therefore never needs to be flushed.
- */
- if (page == ZERO_PAGE(0))
- return;
-
- mapping = page_mapping_file(page);
-
- if (mapping && !mapping_mapped(mapping))
- clear_bit(PG_dcache_clean, &page->flags);
- else {
- __flush_dcache_page(mapping, page);
- if (mapping)
- __flush_icache_all();
- set_bit(PG_dcache_clean, &page->flags);
- }
-}
-EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
deleted file mode 100644
index 52425d383cea..000000000000
--- a/arch/unicore32/mm/init.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/init.c
- *
- * Copyright (C) 2010 GUAN Xue-tao
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/mman.h>
-#include <linux/nodemask.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-#include <linux/gfp.h>
-#include <linux/sort.h>
-#include <linux/dma-mapping.h>
-#include <linux/export.h>
-
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <linux/sizes.h>
-#include <asm/tlb.h>
-#include <asm/memblock.h>
-#include <mach/map.h>
-
-#include "mm.h"
-
-/*
- * This keeps memory configuration data used by a couple memory
- * initialization functions, as well as show_mem() for the skipping
- * of holes in the memory map. It is populated by uc32_add_memory().
- */
-struct meminfo meminfo;
-
-static void __init find_limits(unsigned long *min, unsigned long *max_low,
- unsigned long *max_high)
-{
- struct meminfo *mi = &meminfo;
- int i;
-
- *min = -1UL;
- *max_low = *max_high = 0;
-
- for_each_bank(i, mi) {
- struct membank *bank = &mi->bank[i];
- unsigned long start, end;
-
- start = bank_pfn_start(bank);
- end = bank_pfn_end(bank);
-
- if (*min > start)
- *min = start;
- if (*max_high < end)
- *max_high = end;
- if (bank->highmem)
- continue;
- if (*max_low < end)
- *max_low = end;
- }
-}
-
-static void __init uc32_bootmem_free(unsigned long max_low)
-{
- unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
-
- max_zone_pfn[ZONE_DMA] = max_low;
- max_zone_pfn[ZONE_NORMAL] = max_low;
-
- /*
- * Adjust the sizes according to any special requirements for
- * this machine type.
- * This might lower ZONE_DMA limit.
- */
- arch_adjust_zones(max_zone_pfn);
-
- free_area_init(max_zone_pfn);
-}
-
-int pfn_valid(unsigned long pfn)
-{
- return memblock_is_memory(pfn << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(pfn_valid);
-
-static void uc32_memory_present(void)
-{
-}
-
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
- const struct membank *a = _a, *b = _b;
- long cmp = bank_pfn_start(a) - bank_pfn_start(b);
- return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
-void __init uc32_memblock_init(struct meminfo *mi)
-{
- int i;
-
- sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]),
- meminfo_cmp, NULL);
-
- for (i = 0; i < mi->nr_banks; i++)
- memblock_add(mi->bank[i].start, mi->bank[i].size);
-
- /* Register the kernel text, kernel data and initrd with memblock. */
- memblock_reserve(__pa(_text), _end - _text);
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (!phys_initrd_size) {
- phys_initrd_start = 0x01000000;
- phys_initrd_size = SZ_8M;
- }
-
- if (phys_initrd_size) {
- memblock_reserve(phys_initrd_start, phys_initrd_size);
-
- /* Now convert initrd to virtual addresses */
- initrd_start = __phys_to_virt(phys_initrd_start);
- initrd_end = initrd_start + phys_initrd_size;
- }
-#endif
-
- uc32_mm_memblock_reserve();
-
- memblock_allow_resize();
- memblock_dump_all();
-}
-
-void __init bootmem_init(void)
-{
- unsigned long min, max_low, max_high;
-
- max_low = max_high = 0;
-
- find_limits(&min, &max_low, &max_high);
-
- node_set_online(0);
-
- /*
- * Sparsemem tries to allocate bootmem in memory_present(),
- * so must be done after the fixed reservations
- */
- uc32_memory_present();
-
- /*
- * sparse_init() needs the bootmem allocator up and running.
- */
- sparse_init();
-
- /*
- * Now free the memory - free_area_init needs
- * the sparse mem_map arrays initialized by sparse_init()
- * for memmap_init_zone(), otherwise all PFNs are invalid.
- */
- uc32_bootmem_free(max_low);
-
- high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
-
- /*
- * This doesn't seem to be used by the Linux memory manager any
- * more, but is used by ll_rw_block. If we can get rid of it, we
- * also get rid of some of the stuff above as well.
- *
- * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
- * the system, not the maximum PFN.
- */
- max_low_pfn = max_low - PHYS_PFN_OFFSET;
- max_pfn = max_high - PHYS_PFN_OFFSET;
-}
-
-static inline void
-free_memmap(unsigned long start_pfn, unsigned long end_pfn)
-{
- struct page *start_pg, *end_pg;
- unsigned long pg, pgend;
-
- /*
- * Convert start_pfn/end_pfn to a struct page pointer.
- */
- start_pg = pfn_to_page(start_pfn - 1) + 1;
- end_pg = pfn_to_page(end_pfn);
-
- /*
- * Convert to physical addresses, and
- * round start upwards and end downwards.
- */
- pg = PAGE_ALIGN(__pa(start_pg));
- pgend = __pa(end_pg) & PAGE_MASK;
-
- /*
- * If there are free pages between these,
- * free the section of the memmap array.
- */
- if (pg < pgend)
- memblock_free(pg, pgend - pg);
-}
-
-/*
- * The mem_map array can get very big. Free the unused area of the memory map.
- */
-static void __init free_unused_memmap(struct meminfo *mi)
-{
- unsigned long bank_start, prev_bank_end = 0;
- unsigned int i;
-
- /*
- * This relies on each bank being in address order.
- * The banks are sorted previously in bootmem_init().
- */
- for_each_bank(i, mi) {
- struct membank *bank = &mi->bank[i];
-
- bank_start = bank_pfn_start(bank);
-
- /*
- * If we had a previous bank, and there is a space
- * between the current bank and the previous, free it.
- */
- if (prev_bank_end && prev_bank_end < bank_start)
- free_memmap(prev_bank_end, bank_start);
-
- /*
- * Align up here since the VM subsystem insists that the
- * memmap entries are valid from the bank end aligned to
- * MAX_ORDER_NR_PAGES.
- */
- prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
- }
-}
-
-/*
- * mem_init() marks the free areas in the mem_map and tells us how much
- * memory is free. This is done after various parts of the system have
- * claimed their memory after the kernel image.
- */
-void __init mem_init(void)
-{
- max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
-
- free_unused_memmap(&meminfo);
-
- /* this will put all unused low memory onto the freelists */
- memblock_free_all();
-
- mem_init_print_info(NULL);
-
- BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR);
- BUG_ON(TASK_SIZE > MODULES_VADDR);
-
- if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
- /*
- * On a machine this small we won't get
- * anywhere without overcommit, so turn
- * it on by default.
- */
- sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
- }
-}
diff --git a/arch/unicore32/mm/ioremap.c b/arch/unicore32/mm/ioremap.c
deleted file mode 100644
index 46a64bd6156a..000000000000
--- a/arch/unicore32/mm/ioremap.c
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/ioremap.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Re-map IO memory to kernel address space so that we can access it.
- *
- * This allows a driver to remap an arbitrary region of bus memory into
- * virtual space. One should *only* use readl, writel, memcpy_toio and
- * so on with such remapped areas.
- *
- * Because UniCore only has a 32-bit address space we can't address the
- * whole of the (physical) PCI space at once. PCI huge-mode addressing
- * allows us to circumvent this restriction by splitting PCI space into
- * two 2GB chunks and mapping only one at a time into processor memory.
- * We use MMU protection domains to trap any attempt to access the bank
- * that is not currently mapped. (This isn't fully implemented yet.)
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/cacheflush.h>
-#include <asm/mmu_context.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <linux/sizes.h>
-
-#include <mach/map.h>
-#include "mm.h"
-
-/*
- * Used by ioremap() and iounmap() code to mark (super)section-mapped
- * I/O regions in vm_struct->flags field.
- */
-#define VM_UNICORE_SECTION_MAPPING 0x80000000
-
-int ioremap_page(unsigned long virt, unsigned long phys,
- const struct mem_type *mtype)
-{
- return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
- __pgprot(mtype->prot_pte));
-}
-EXPORT_SYMBOL(ioremap_page);
-
-/*
- * Section support is unsafe on SMP - If you iounmap and ioremap a region,
- * the other CPUs will not see this change until their next context switch.
- * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
- * which requires the new ioremap'd region to be referenced, the CPU will
- * reference the _old_ region.
- *
- * Note that get_vm_area_caller() allocates a guard 4K page, so we need to
- * mask the size back to 4MB aligned or we will overflow in the loop below.
- */
-static void unmap_area_sections(unsigned long virt, unsigned long size)
-{
- unsigned long addr = virt, end = virt + (size & ~(SZ_4M - 1));
- pgd_t *pgd;
-
- flush_cache_vunmap(addr, end);
- pgd = pgd_offset_k(addr);
- do {
- pmd_t pmd, *pmdp = pmd_offset((pud_t *)pgd, addr);
-
- pmd = *pmdp;
- if (!pmd_none(pmd)) {
- /*
- * Clear the PMD from the page table, and
- * increment the kvm sequence so others
- * notice this change.
- *
- * Note: this is still racy on SMP machines.
- */
- pmd_clear(pmdp);
-
- /*
- * Free the page table, if there was one.
- */
- if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
- pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
- }
-
- addr += PGDIR_SIZE;
- pgd++;
- } while (addr < end);
-
- flush_tlb_kernel_range(virt, end);
-}
-
-static int
-remap_area_sections(unsigned long virt, unsigned long pfn,
- size_t size, const struct mem_type *type)
-{
- unsigned long addr = virt, end = virt + size;
- pgd_t *pgd;
-
- /*
- * Remove and free any PTE-based mapping, and
- * sync the current kernel mapping.
- */
- unmap_area_sections(virt, size);
-
- pgd = pgd_offset_k(addr);
- do {
- pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
-
- set_pmd(pmd, __pmd(__pfn_to_phys(pfn) | type->prot_sect));
- pfn += SZ_4M >> PAGE_SHIFT;
- flush_pmd_entry(pmd);
-
- addr += PGDIR_SIZE;
- pgd++;
- } while (addr < end);
-
- return 0;
-}
-
-void __iomem *__uc32_ioremap_pfn_caller(unsigned long pfn,
- unsigned long offset, size_t size, unsigned int mtype, void *caller)
-{
- const struct mem_type *type;
- int err;
- unsigned long addr;
- struct vm_struct *area;
-
- /*
- * High mappings must be section aligned
- */
- if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SECTION_MASK))
- return NULL;
-
- /*
- * Don't allow RAM to be mapped
- */
- if (pfn_valid(pfn)) {
- WARN(1, "BUG: Your driver calls ioremap() on\n"
- "system memory. This leads to architecturally\n"
- "unpredictable behaviour, and ioremap() will fail in\n"
- "the next kernel release. Please fix your driver.\n");
- return NULL;
- }
-
- type = get_mem_type(mtype);
- if (!type)
- return NULL;
-
- /*
- * Page align the mapping size, taking account of any offset.
- */
- size = PAGE_ALIGN(offset + size);
-
- area = get_vm_area_caller(size, VM_IOREMAP, caller);
- if (!area)
- return NULL;
- addr = (unsigned long)area->addr;
-
- if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
- area->flags |= VM_UNICORE_SECTION_MAPPING;
- err = remap_area_sections(addr, pfn, size, type);
- } else
- err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
- __pgprot(type->prot_pte));
-
- if (err) {
- vunmap((void *)addr);
- return NULL;
- }
-
- flush_cache_vmap(addr, addr + size);
- return (void __iomem *) (offset + addr);
-}
-
-void __iomem *__uc32_ioremap_caller(unsigned long phys_addr, size_t size,
- unsigned int mtype, void *caller)
-{
- unsigned long last_addr;
- unsigned long offset = phys_addr & ~PAGE_MASK;
- unsigned long pfn = __phys_to_pfn(phys_addr);
-
- /*
- * Don't allow wraparound or zero size
- */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr)
- return NULL;
-
- return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype, caller);
-}
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void __iomem *
-__uc32_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
- unsigned int mtype)
-{
- return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype,
- __builtin_return_address(0));
-}
-EXPORT_SYMBOL(__uc32_ioremap_pfn);
-
-void __iomem *
-__uc32_ioremap(unsigned long phys_addr, size_t size)
-{
- return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE,
- __builtin_return_address(0));
-}
-EXPORT_SYMBOL(__uc32_ioremap);
-
-void __uc32_iounmap(volatile void __iomem *io_addr)
-{
- void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
- struct vm_struct *vm;
-
- /*
- * If this is a section based mapping we need to handle it
- * specially as the VM subsystem does not know how to handle
- * such a beast. We need the lock here b/c we need to clear
- * all the mappings before the area can be reclaimed
- * by someone else.
- */
- vm = find_vm_area(addr);
- if (vm && (vm->flags & VM_IOREMAP) &&
- (vm->flags & VM_UNICORE_SECTION_MAPPING))
- unmap_area_sections((unsigned long)vm->addr, vm->size);
-
- vunmap(addr);
-}
-EXPORT_SYMBOL(__uc32_iounmap);
diff --git a/arch/unicore32/mm/mm.h b/arch/unicore32/mm/mm.h
deleted file mode 100644
index f157f5d249ab..000000000000
--- a/arch/unicore32/mm/mm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/mm.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <asm/hwdef-copro.h>
-
-/* the upper-most page table pointer */
-extern pmd_t *top_pmd;
-extern int sysctl_overcommit_memory;
-
-#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
-
-struct mem_type {
- unsigned int prot_pte;
- unsigned int prot_l1;
- unsigned int prot_sect;
-};
-
-const struct mem_type *get_mem_type(unsigned int type);
-
-extern void __flush_dcache_page(struct address_space *, struct page *);
-extern void hook_fault_code(int nr, int (*fn)
- (unsigned long, unsigned int, struct pt_regs *),
- int sig, int code, const char *name);
-
-void __init bootmem_init(void);
-void uc32_mm_memblock_reserve(void);
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
deleted file mode 100644
index 183d5b056814..000000000000
--- a/arch/unicore32/mm/mmu.c
+++ /dev/null
@@ -1,513 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/mmu.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/nodemask.h>
-#include <linux/memblock.h>
-#include <linux/fs.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <linux/sizes.h>
-#include <asm/tlb.h>
-#include <asm/memblock.h>
-
-#include <mach/map.h>
-
-#include "mm.h"
-
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-EXPORT_SYMBOL(empty_zero_page);
-
-/*
- * The pmd table for the upper-most set of pages.
- */
-pmd_t *top_pmd;
-
-pgprot_t pgprot_user;
-EXPORT_SYMBOL(pgprot_user);
-
-pgprot_t pgprot_kernel;
-EXPORT_SYMBOL(pgprot_kernel);
-
-static int __init noalign_setup(char *__unused)
-{
- cr_alignment &= ~CR_A;
- cr_no_alignment &= ~CR_A;
- set_cr(cr_alignment);
- return 1;
-}
-__setup("noalign", noalign_setup);
-
-void adjust_cr(unsigned long mask, unsigned long set)
-{
- unsigned long flags;
-
- mask &= ~CR_A;
-
- set &= mask;
-
- local_irq_save(flags);
-
- cr_no_alignment = (cr_no_alignment & ~mask) | set;
- cr_alignment = (cr_alignment & ~mask) | set;
-
- set_cr((get_cr() & ~mask) | set);
-
- local_irq_restore(flags);
-}
-
-struct map_desc {
- unsigned long virtual;
- unsigned long pfn;
- unsigned long length;
- unsigned int type;
-};
-
-#define PROT_PTE_DEVICE (PTE_PRESENT | PTE_YOUNG | \
- PTE_DIRTY | PTE_READ | PTE_WRITE)
-#define PROT_SECT_DEVICE (PMD_TYPE_SECT | PMD_PRESENT | \
- PMD_SECT_READ | PMD_SECT_WRITE)
-
-static struct mem_type mem_types[] = {
- [MT_DEVICE] = { /* Strongly ordered */
- .prot_pte = PROT_PTE_DEVICE,
- .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
- .prot_sect = PROT_SECT_DEVICE,
- },
- /*
- * MT_KUSER: pte for vecpage -- cacheable,
- * and sect for unigfx mmap -- noncacheable
- */
- [MT_KUSER] = {
- .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
- PTE_CACHEABLE | PTE_READ | PTE_EXEC,
- .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
- .prot_sect = PROT_SECT_DEVICE,
- },
- [MT_HIGH_VECTORS] = {
- .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
- PTE_CACHEABLE | PTE_READ | PTE_WRITE |
- PTE_EXEC,
- .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
- },
- [MT_MEMORY] = {
- .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
- PTE_WRITE | PTE_EXEC,
- .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
- .prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
- PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC,
- },
- [MT_ROM] = {
- .prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
- PMD_SECT_READ,
- },
-};
-
-const struct mem_type *get_mem_type(unsigned int type)
-{
- return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
-}
-EXPORT_SYMBOL(get_mem_type);
-
-/*
- * Adjust the PMD section entries according to the CPU in use.
- */
-static void __init build_mem_type_table(void)
-{
- pgprot_user = __pgprot(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE);
- pgprot_kernel = __pgprot(PTE_PRESENT | PTE_YOUNG |
- PTE_DIRTY | PTE_READ | PTE_WRITE |
- PTE_EXEC | PTE_CACHEABLE);
-}
-
-#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
-
-static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
- unsigned long prot)
-{
- if (pmd_none(*pmd)) {
- size_t size = PTRS_PER_PTE * sizeof(pte_t);
- pte_t *pte = memblock_alloc(size, size);
-
- if (!pte)
- panic("%s: Failed to allocate %zu bytes align=%zx\n",
- __func__, size, size);
-
- __pmd_populate(pmd, __pa(pte) | prot);
- }
- BUG_ON(pmd_bad(*pmd));
- return pte_offset_kernel(pmd, addr);
-}
-
-static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
- unsigned long end, unsigned long pfn,
- const struct mem_type *type)
-{
- pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
- do {
- set_pte(pte, pfn_pte(pfn, __pgprot(type->prot_pte)));
- pfn++;
- } while (pte++, addr += PAGE_SIZE, addr != end);
-}
-
-static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
- unsigned long end, unsigned long phys,
- const struct mem_type *type)
-{
- pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
-
- /*
- * Try a section mapping - end, addr and phys must all be aligned
- * to a section boundary.
- */
- if (((addr | end | phys) & ~SECTION_MASK) == 0) {
- pmd_t *p = pmd;
-
- do {
- set_pmd(pmd, __pmd(phys | type->prot_sect));
- phys += SECTION_SIZE;
- } while (pmd++, addr += SECTION_SIZE, addr != end);
-
- flush_pmd_entry(p);
- } else {
- /*
- * No need to loop; pte's aren't interested in the
- * individual L1 entries.
- */
- alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
- }
-}
-
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'. We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections.
- */
-static void __init create_mapping(struct map_desc *md)
-{
- unsigned long phys, addr, length, end;
- const struct mem_type *type;
- pgd_t *pgd;
-
- if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
- printk(KERN_WARNING "BUG: not creating mapping for "
- "0x%08llx at 0x%08lx in user region\n",
- __pfn_to_phys((u64)md->pfn), md->virtual);
- return;
- }
-
- if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
- md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
- printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
- "overlaps vmalloc space\n",
- __pfn_to_phys((u64)md->pfn), md->virtual);
- }
-
- type = &mem_types[md->type];
-
- addr = md->virtual & PAGE_MASK;
- phys = (unsigned long)__pfn_to_phys(md->pfn);
- length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
-
- if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
- printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
- "be mapped using pages, ignoring.\n",
- __pfn_to_phys(md->pfn), addr);
- return;
- }
-
- pgd = pgd_offset_k(addr);
- end = addr + length;
- do {
- unsigned long next = pgd_addr_end(addr, end);
-
- alloc_init_section(pgd, addr, next, phys, type);
-
- phys += next - addr;
- addr = next;
- } while (pgd++, addr != end);
-}
-
-static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
- */
-static int __init early_vmalloc(char *arg)
-{
- unsigned long vmalloc_reserve = memparse(arg, NULL);
-
- if (vmalloc_reserve < SZ_16M) {
- vmalloc_reserve = SZ_16M;
- printk(KERN_WARNING
- "vmalloc area too small, limiting to %luMB\n",
- vmalloc_reserve >> 20);
- }
-
- if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
- vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
- printk(KERN_WARNING
- "vmalloc area is too big, limiting to %luMB\n",
- vmalloc_reserve >> 20);
- }
-
- vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
- return 0;
-}
-early_param("vmalloc", early_vmalloc);
-
-static phys_addr_t lowmem_limit __initdata = SZ_1G;
-
-static void __init sanity_check_meminfo(void)
-{
- int i, j;
-
- lowmem_limit = __pa(vmalloc_min - 1) + 1;
- memblock_set_current_limit(lowmem_limit);
-
- for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
- struct membank *bank = &meminfo.bank[j];
- *bank = meminfo.bank[i];
- j++;
- }
- meminfo.nr_banks = j;
-}
-
-static inline void prepare_page_table(void)
-{
- unsigned long addr;
- phys_addr_t end;
-
- /*
- * Clear out all the mappings below the kernel image.
- */
- for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- /*
- * Find the end of the first block of lowmem.
- */
- end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
- if (end >= lowmem_limit)
- end = lowmem_limit;
-
- /*
- * Clear out all the kernel space mappings, except for the first
- * memory bank, up to the end of the vmalloc region.
- */
- for (addr = __phys_to_virt(end);
- addr < VMALLOC_END; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-}
-
-/*
- * Reserve the special regions of memory
- */
-void __init uc32_mm_memblock_reserve(void)
-{
- /*
- * Reserve the page tables. These are already in use,
- * and can only be in node 0.
- */
- memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
-}
-
-/*
- * Set up device the mappings. Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function. This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(void)
-{
- struct map_desc map;
- unsigned long addr;
- void *vectors;
-
- /*
- * Allocate the vector page early.
- */
- vectors = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!vectors)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
-
- for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- /*
- * Create a mapping for the machine vectors at the high-vectors
- * location (0xffff0000). If we aren't using high-vectors, also
- * create a mapping at the low-vectors virtual address.
- */
- map.pfn = __phys_to_pfn(virt_to_phys(vectors));
- map.virtual = VECTORS_BASE;
- map.length = PAGE_SIZE;
- map.type = MT_HIGH_VECTORS;
- create_mapping(&map);
-
- /*
- * Create a mapping for the kuser page at the special
- * location (0xbfff0000) to the same vectors location.
- */
- map.pfn = __phys_to_pfn(virt_to_phys(vectors));
- map.virtual = KUSER_VECPAGE_BASE;
- map.length = PAGE_SIZE;
- map.type = MT_KUSER;
- create_mapping(&map);
-
- /*
- * Finally flush the caches and tlb to ensure that we're in a
- * consistent state wrt the writebuffer. This also ensures that
- * any write-allocated cache lines in the vector page are written
- * back. After this point, we can start to touch devices again.
- */
- local_flush_tlb_all();
- flush_cache_all();
-}
-
-static void __init map_lowmem(void)
-{
- struct memblock_region *reg;
-
- /* Map all the lowmem memory banks. */
- for_each_memblock(memory, reg) {
- phys_addr_t start = reg->base;
- phys_addr_t end = start + reg->size;
- struct map_desc map;
-
- if (end > lowmem_limit)
- end = lowmem_limit;
- if (start >= end)
- break;
-
- map.pfn = __phys_to_pfn(start);
- map.virtual = __phys_to_virt(start);
- map.length = end - start;
- map.type = MT_MEMORY;
-
- create_mapping(&map);
- }
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(void)
-{
- void *zero_page;
-
- build_mem_type_table();
- sanity_check_meminfo();
- prepare_page_table();
- map_lowmem();
- devicemaps_init();
-
- top_pmd = pmd_off_k(0xffff0000);
-
- /* allocate the zero page. */
- zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
- if (!zero_page)
- panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
- __func__, PAGE_SIZE, PAGE_SIZE);
-
- bootmem_init();
-
- empty_zero_page = virt_to_page(zero_page);
- __flush_dcache_page(NULL, empty_zero_page);
-}
-
-/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages. This will then ensure that we have predictable
- * results when turning the mmu off
- */
-void setup_mm_for_reboot(void)
-{
- unsigned long base_pmdval;
- pgd_t *pgd;
- int i;
-
- /*
- * We need to access to user-mode page tables here. For kernel threads
- * we don't have any user-mode mappings so we use the context that we
- * "borrowed".
- */
- pgd = current->active_mm->pgd;
-
- base_pmdval = PMD_SECT_WRITE | PMD_SECT_READ | PMD_TYPE_SECT;
-
- for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
- unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
- pmd_t *pmd;
-
- pmd = pmd_off(pgd, i << PGDIR_SHIFT);
- set_pmd(pmd, __pmd(pmdval));
- flush_pmd_entry(pmd);
- }
-
- local_flush_tlb_all();
-}
-
-/*
- * Take care of architecture specific things when placing a new PTE into
- * a page table, or changing an existing PTE. Basically, there are two
- * things that we need to take care of:
- *
- * 1. If PG_dcache_clean is not set for the page, we need to ensure
- * that any cache entries for the kernels virtual memory
- * range are written back to the page.
- * 2. If we have multiple shared mappings of the same space in
- * an object, we need to deal with the cache aliasing issues.
- *
- * Note that the pte lock will be held.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
- pte_t *ptep)
-{
- unsigned long pfn = pte_pfn(*ptep);
- struct address_space *mapping;
- struct page *page;
-
- if (!pfn_valid(pfn))
- return;
-
- /*
- * The zero page is never written to, so never has any dirty
- * cache lines, and therefore never needs to be flushed.
- */
- page = pfn_to_page(pfn);
- if (page == ZERO_PAGE(0))
- return;
-
- mapping = page_mapping_file(page);
- if (!test_and_set_bit(PG_dcache_clean, &page->flags))
- __flush_dcache_page(mapping, page);
- if (mapping)
- if (vma->vm_flags & VM_EXEC)
- __flush_icache_all();
-}
diff --git a/arch/unicore32/mm/pgd.c b/arch/unicore32/mm/pgd.c
deleted file mode 100644
index f01c73e04836..000000000000
--- a/arch/unicore32/mm/pgd.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/pgd.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/mm.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-#include "mm.h"
-
-#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
-
-/*
- * need to get a 4k page for level 1
- */
-pgd_t *get_pgd_slow(struct mm_struct *mm)
-{
- pgd_t *new_pgd, *init_pgd;
- pmd_t *new_pmd, *init_pmd;
- pte_t *new_pte, *init_pte;
-
- new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 0);
- if (!new_pgd)
- goto no_pgd;
-
- memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
-
- /*
- * Copy over the kernel and IO PGD entries
- */
- init_pgd = pgd_offset_k(0);
- memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
- (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
-
- clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
- if (!vectors_high()) {
- /*
- * On UniCore, first page must always be allocated since it
- * contains the machine vectors.
- */
- new_pmd = pmd_alloc(mm, (pud_t *)new_pgd, 0);
- if (!new_pmd)
- goto no_pmd;
-
- new_pte = pte_alloc_map(mm, new_pmd, 0);
- if (!new_pte)
- goto no_pte;
-
- init_pmd = pmd_offset((pud_t *)init_pgd, 0);
- init_pte = pte_offset_map(init_pmd, 0);
- set_pte(new_pte, *init_pte);
- pte_unmap(init_pte);
- pte_unmap(new_pte);
- }
-
- return new_pgd;
-
-no_pte:
- pmd_free(mm, new_pmd);
- mm_dec_nr_pmds(mm);
-no_pmd:
- free_pages((unsigned long)new_pgd, 0);
-no_pgd:
- return NULL;
-}
-
-void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
-{
- pmd_t *pmd;
- pgtable_t pte;
-
- if (!pgd)
- return;
-
- /* pgd is always present and good */
- pmd = pmd_off(pgd, 0);
- if (pmd_none(*pmd))
- goto free;
- if (pmd_bad(*pmd)) {
- pmd_ERROR(*pmd);
- pmd_clear(pmd);
- goto free;
- }
-
- pte = pmd_pgtable(*pmd);
- pmd_clear(pmd);
- pte_free(mm, pte);
- mm_dec_nr_ptes(mm);
- pmd_free(mm, pmd);
- mm_dec_nr_pmds(mm);
-free:
- free_pages((unsigned long) pgd, 0);
-}
diff --git a/arch/unicore32/mm/proc-macros.S b/arch/unicore32/mm/proc-macros.S
deleted file mode 100644
index 3b0ae7d5bd80..000000000000
--- a/arch/unicore32/mm/proc-macros.S
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/proc-macros.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * We need constants.h for:
- * VMA_VM_MM
- * VMA_VM_FLAGS
- * VM_EXEC
- */
-#include <generated/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-
-/*
- * the cache line sizes of the I and D cache are the same
- */
-#define CACHE_LINESIZE 32
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions. Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#ifdef CONFIG_CPU_UCV2
-#define MAX_AREA_SIZE 0x800 /* 64 cache line */
-#endif
-
-/*
- * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
- */
- .macro vma_vm_mm, rd, rn
- ldw \rd, [\rn+], #VMA_VM_MM
- .endm
-
-/*
- * vma_vm_flags - get vma->vm_flags
- */
- .macro vma_vm_flags, rd, rn
- ldw \rd, [\rn+], #VMA_VM_FLAGS
- .endm
-
- .macro tsk_mm, rd, rn
- ldw \rd, [\rn+], #TI_TASK
- ldw \rd, [\rd+], #TSK_ACTIVE_MM
- .endm
-
-/*
- * act_mm - get current->active_mm
- */
- .macro act_mm, rd
- andn \rd, sp, #8128
- andn \rd, \rd, #63
- ldw \rd, [\rd+], #TI_TASK
- ldw \rd, [\rd+], #TSK_ACTIVE_MM
- .endm
-
-/*
- * mmid - get context id from mm pointer (mm->context.id)
- */
- .macro mmid, rd, rn
- ldw \rd, [\rn+], #MM_CONTEXT_ID
- .endm
-
-/*
- * mask_asid - mask the ASID from the context ID
- */
- .macro asid, rd, rn
- and \rd, \rn, #255
- .endm
-
- .macro crval, clear, mmuset, ucset
- .word \clear
- .word \mmuset
- .endm
-
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-/*
- * va2pa va, pa, tbl, msk, off, err
- * This macro is used to translate virtual address to its physical address.
- *
- * va: virtual address
- * pa: physical address, result is stored in this register
- * tbl, msk, off: temp registers, will be destroyed
- * err: jump to error label if the physical address not exist
- * NOTE: all regs must be different
- */
- .macro va2pa, va, pa, tbl, msk, off, err=990f
- movc \pa, p0.c2, #0
- mov \off, \va >> #22 @ off <- index of 1st page table
- adr \tbl, 910f @ tbl <- table of 1st page table
-900: @ ---- handle 1, 2 page table
- add \pa, \pa, #PAGE_OFFSET @ pa <- virt addr of page table
- ldw \pa, [\pa+], \off << #2 @ pa <- the content of pt
- cand.a \pa, #4 @ test exist bit
- beq \err @ if not exist
- and \off, \pa, #3 @ off <- the last 2 bits
- add \tbl, \tbl, \off << #3 @ cmove table pointer
- ldw \msk, [\tbl+], #0 @ get the mask
- ldw pc, [\tbl+], #4
-930: @ ---- handle 2nd page table
- and \pa, \pa, \msk @ pa <- phys addr of 2nd pt
- mov \off, \va << #10
- cntlo \tbl, \msk @ use tbl as temp reg
- mov \off, \off >> \tbl
- mov \off, \off >> #2 @ off <- index of 2nd pt
- adr \tbl, 920f @ tbl <- table of 2nd pt
- b 900b
-910: @ 1st level page table
- .word 0xfffff000, 930b @ second level page table
- .word 0xfffffc00, 930b @ second level large page table
- .word 0x00000000, \err @ invalid
- .word 0xffc00000, 980f @ super page
-
-920: @ 2nd level page table
- .word 0xfffff000, 980f @ page
- .word 0xffffc000, 980f @ middle page
- .word 0xffff0000, 980f @ large page
- .word 0x00000000, \err @ invalid
-980:
- andn \tbl, \va, \msk
- and \pa, \pa, \msk
- or \pa, \pa, \tbl
-990:
- .endm
-#endif
-
- .macro dcacheline_flush, addr, t1, t2
- mov \t1, \addr << #20
- ldw \t2, =_stext @ _stext must ALIGN(4096)
- add \t2, \t2, \t1 >> #20
- ldw \t1, [\t2+], #0x0000
- ldw \t1, [\t2+], #0x1000
- ldw \t1, [\t2+], #0x2000
- ldw \t1, [\t2+], #0x3000
- .endm
diff --git a/arch/unicore32/mm/proc-syms.c b/arch/unicore32/mm/proc-syms.c
deleted file mode 100644
index 6c081616fc3c..000000000000
--- a/arch/unicore32/mm/proc-syms.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/proc-syms.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-
-EXPORT_SYMBOL(cpu_dcache_clean_area);
-EXPORT_SYMBOL(cpu_set_pte);
-
-EXPORT_SYMBOL(__cpuc_coherent_kern_range);
diff --git a/arch/unicore32/mm/proc-ucv2.S b/arch/unicore32/mm/proc-ucv2.S
deleted file mode 100644
index 18f8c4fb21a0..000000000000
--- a/arch/unicore32/mm/proc-ucv2.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/proc-ucv2.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/pgtable.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-
-#include "proc-macros.S"
-
-ENTRY(cpu_proc_fin)
- stm.w (lr), [sp-]
- mov ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
- mov.a asr, ip
- b.l __cpuc_flush_kern_all
- ldm.w (pc), [sp]+
-
-/*
- * cpu_reset(loc)
- *
- * Perform a soft reset of the system. Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * - loc - location to jump to for soft reset
- */
- .align 5
-ENTRY(cpu_reset)
- mov ip, #0
- movc p0.c5, ip, #28 @ Cache invalidate all
- nop8
-
- movc p0.c6, ip, #6 @ TLB invalidate all
- nop8
-
- movc ip, p0.c1, #0 @ ctrl register
- or ip, ip, #0x2000 @ vector base address
- andn ip, ip, #0x000f @ ............idam
- movc p0.c1, ip, #0 @ disable caches and mmu
- nop
- mov pc, r0 @ jump to loc
- nop8
-
-/*
- * cpu_do_idle()
- *
- * Idle the processor (eg, wait for interrupt).
- *
- * IRQs are already disabled.
- */
-ENTRY(cpu_do_idle)
- mov r0, #0 @ PCI address
- .rept 8
- ldw r1, [r0]
- .endr
- mov pc, lr
-
-ENTRY(cpu_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- csub.a r1, #MAX_AREA_SIZE
- bsg 101f
- mov r9, #PAGE_SZ
- sub r9, r9, #1 @ PAGE_MASK
-1: va2pa r0, r10, r11, r12, r13 @ r10 is PA
- b 3f
-2: cand.a r0, r9
- beq 1b
-3: movc p0.c5, r10, #11 @ clean D entry
- nop8
- add r0, r0, #CACHE_LINESIZE
- add r10, r10, #CACHE_LINESIZE
- sub.a r1, r1, #CACHE_LINESIZE
- bua 2b
- mov pc, lr
-#endif
-101: mov ip, #0
- movc p0.c5, ip, #10 @ Dcache clean all
- nop8
-
- mov pc, lr
-
-/*
- * cpu_do_switch_mm(pgd_phys)
- *
- * Set the translation table base pointer to be pgd_phys
- *
- * - pgd_phys - physical address of new pgd
- *
- * It is assumed that:
- * - we are not using split page tables
- */
- .align 5
-ENTRY(cpu_do_switch_mm)
- movc p0.c2, r0, #0 @ update page table ptr
- nop8
-
- movc p0.c6, ip, #6 @ TLB invalidate all
- nop8
-
- mov pc, lr
-
-/*
- * cpu_set_pte(ptep, pte)
- *
- * Set a level 2 translation table entry.
- *
- * - ptep - pointer to level 2 translation table entry
- * - pte - PTE value to store
- */
- .align 5
-ENTRY(cpu_set_pte)
- stw r1, [r0]
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
- sub r2, r0, #PAGE_OFFSET
- movc p0.c5, r2, #11 @ Dcache clean line
- nop8
-#else
- mov ip, #0
- movc p0.c5, ip, #10 @ Dcache clean all
- nop8
- @dcacheline_flush r0, r2, ip
-#endif
- mov pc, lr
-
diff --git a/arch/unicore32/mm/tlb-ucv2.S b/arch/unicore32/mm/tlb-ucv2.S
deleted file mode 100644
index 0ce9c6b6f1db..000000000000
--- a/arch/unicore32/mm/tlb-ucv2.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/tlb-ucv2.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-/*
- * __cpu_flush_user_tlb_range(start, end, vma)
- *
- * Invalidate a range of TLB entries in the specified address space.
- *
- * - start - start address (may not be aligned)
- * - end - end address (exclusive, may not be aligned)
- * - vma - vma_struct describing address range
- */
-ENTRY(__cpu_flush_user_tlb_range)
-#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
- mov r0, r0 >> #PAGE_SHIFT @ align address
- mov r0, r0 << #PAGE_SHIFT
- vma_vm_flags r2, r2 @ get vma->vm_flags
-1:
- movc p0.c6, r0, #3
- nop8
-
- cand.a r2, #VM_EXEC @ Executable area ?
- beq 2f
-
- movc p0.c6, r0, #5
- nop8
-2:
- add r0, r0, #PAGE_SZ
- csub.a r0, r1
- beb 1b
-#else
- movc p0.c6, r0, #2
- nop8
-
- cand.a r2, #VM_EXEC @ Executable area ?
- beq 2f
-
- movc p0.c6, r0, #4
- nop8
-2:
-#endif
- mov pc, lr
-
-/*
- * __cpu_flush_kern_tlb_range(start,end)
- *
- * Invalidate a range of kernel TLB entries
- *
- * - start - start address (may not be aligned)
- * - end - end address (exclusive, may not be aligned)
- */
-ENTRY(__cpu_flush_kern_tlb_range)
-#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
- mov r0, r0 >> #PAGE_SHIFT @ align address
- mov r0, r0 << #PAGE_SHIFT
-1:
- movc p0.c6, r0, #3
- nop8
-
- movc p0.c6, r0, #5
- nop8
-
- add r0, r0, #PAGE_SZ
- csub.a r0, r1
- beb 1b
-#else
- movc p0.c6, r0, #2
- nop8
-
- movc p0.c6, r0, #4
- nop8
-#endif
- mov pc, lr
-
diff --git a/kernel/reboot.c b/kernel/reboot.c
index 491f1347bf43..e7b78d5ae1ab 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -26,7 +26,7 @@ int C_A_D = 1;
struct pid *cad_pid;
EXPORT_SYMBOL(cad_pid);
-#if defined(CONFIG_ARM) || defined(CONFIG_UNICORE32)
+#if defined(CONFIG_ARM)
#define DEFAULT_REBOOT_MODE = REBOOT_HARD
#else
#define DEFAULT_REBOOT_MODE
--
2.26.2
Powered by blists - more mailing lists