Message-Id: <20200623065744.18393-8-rppt@kernel.org>
Date:   Tue, 23 Jun 2020 09:57:43 +0300
From:   Mike Rapoport <rppt@...nel.org>
To:     linux-kernel@...r.kernel.org
Cc:     Andrew Morton <akpm@...ux-foundation.org>,
        Arnd Bergmann <arnd@...db.de>,
        Guenter Roeck <linux@...ck-us.net>,
        Linus Torvalds <torvalds@...ux-foundation.org>,
        Mike Rapoport <rppt@...nel.org>,
        Mike Rapoport <rppt@...ux.ibm.com>
Subject: [PATCH 7/8] rtc: remove fb-puv3  driver

From: Mike Rapoport <rppt@...ux.ibm.com>

The unicore32 port is removed from the kernel.
There is no point to keep stale RTC driver for this architecture.

Signed-off-by: Mike Rapoport <rppt@...ux.ibm.com>
---
 MAINTAINERS            |   1 -
 drivers/rtc/Kconfig    |   9 --
 drivers/rtc/Makefile   |   1 -
 drivers/rtc/rtc-puv3.c | 286 -----------------------------------------
 4 files changed, 297 deletions(-)
 delete mode 100644 drivers/rtc/rtc-puv3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index b0da9ee8c027..f347469e4891 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13585,7 +13585,6 @@ M:	Guan Xuetao <gxt@....edu.cn>
 S:	Maintained
 W:	http://mprc.pku.edu.cn/~guanxuetao/linux
 T:	git git://github.com/gxt/linux.git
-F:	drivers/rtc/rtc-puv3.c
 
 PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER
 M:	Tomasz Duszynski <tduszyns@...il.com>
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index b54d87d45c89..f3b8e6dcd879 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1729,15 +1729,6 @@ config RTC_DRV_TEGRA
 	  This drive can also be built as a module. If so, the module
 	  will be called rtc-tegra.
 
-config RTC_DRV_PUV3
-	tristate "PKUnity v3 RTC support"
-	depends on ARCH_PUV3
-	help
-	  This enables support for the RTC in the PKUnity-v3 SoCs.
-
-	  This drive can also be built as a module. If so, the module
-	  will be called rtc-puv3.
-
 config RTC_DRV_LOONGSON1
 	tristate "loongson1 RTC support"
 	depends on MACH_LOONGSON32
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 0721752c6ed4..880e08a409c3 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -128,7 +128,6 @@ obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
 obj-$(CONFIG_RTC_DRV_PM8XXX)	+= rtc-pm8xxx.o
 obj-$(CONFIG_RTC_DRV_PS3)	+= rtc-ps3.o
-obj-$(CONFIG_RTC_DRV_PUV3)	+= rtc-puv3.o
 obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
 obj-$(CONFIG_RTC_DRV_R7301)	+= rtc-r7301.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c
deleted file mode 100644
index 954b88d2485f..000000000000
--- a/drivers/rtc/rtc-puv3.c
+++ /dev/null
@@ -1,286 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * RTC driver code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-#include <linux/clk.h>
-#include <linux/log2.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-static struct resource *puv3_rtc_mem;
-
-static int puv3_rtc_alarmno = IRQ_RTCAlarm;
-static int puv3_rtc_tickno  = IRQ_RTC;
-
-static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
-
-/* IRQ Handlers */
-static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
-{
-	struct rtc_device *rdev = id;
-
-	writel(readl(RTC_RTSR) | RTC_RTSR_AL, RTC_RTSR);
-	rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t puv3_rtc_tickirq(int irq, void *id)
-{
-	struct rtc_device *rdev = id;
-
-	writel(readl(RTC_RTSR) | RTC_RTSR_HZ, RTC_RTSR);
-	rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
-	return IRQ_HANDLED;
-}
-
-/* Update control registers */
-static void puv3_rtc_setaie(struct device *dev, int to)
-{
-	unsigned int tmp;
-
-	dev_dbg(dev, "%s: aie=%d\n", __func__, to);
-
-	tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE;
-
-	if (to)
-		tmp |= RTC_RTSR_ALE;
-
-	writel(tmp, RTC_RTSR);
-}
-
-static int puv3_rtc_setpie(struct device *dev, int enabled)
-{
-	unsigned int tmp;
-
-	dev_dbg(dev, "%s: pie=%d\n", __func__, enabled);
-
-	spin_lock_irq(&puv3_rtc_pie_lock);
-	tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;
-
-	if (enabled)
-		tmp |= RTC_RTSR_HZE;
-
-	writel(tmp, RTC_RTSR);
-	spin_unlock_irq(&puv3_rtc_pie_lock);
-
-	return 0;
-}
-
-/* Time read/write */
-static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
-{
-	rtc_time64_to_tm(readl(RTC_RCNR), rtc_tm);
-
-	dev_dbg(dev, "read time %ptRr\n", rtc_tm);
-
-	return 0;
-}
-
-static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
-{
-	dev_dbg(dev, "set time %ptRr\n", tm);
-
-	writel(rtc_tm_to_time64(tm), RTC_RCNR);
-
-	return 0;
-}
-
-static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
-	struct rtc_time *alm_tm = &alrm->time;
-
-	rtc_time64_to_tm(readl(RTC_RTAR), alm_tm);
-
-	alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
-
-	dev_dbg(dev, "read alarm: %d, %ptRr\n", alrm->enabled, alm_tm);
-
-	return 0;
-}
-
-static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
-{
-	struct rtc_time *tm = &alrm->time;
-
-	dev_dbg(dev, "set alarm: %d, %ptRr\n", alrm->enabled, tm);
-
-	writel(rtc_tm_to_time64(tm), RTC_RTAR);
-
-	puv3_rtc_setaie(dev, alrm->enabled);
-
-	if (alrm->enabled)
-		enable_irq_wake(puv3_rtc_alarmno);
-	else
-		disable_irq_wake(puv3_rtc_alarmno);
-
-	return 0;
-}
-
-static int puv3_rtc_proc(struct device *dev, struct seq_file *seq)
-{
-	seq_printf(seq, "periodic_IRQ\t: %s\n",
-		     (readl(RTC_RTSR) & RTC_RTSR_HZE) ? "yes" : "no");
-	return 0;
-}
-
-static const struct rtc_class_ops puv3_rtcops = {
-	.read_time	= puv3_rtc_gettime,
-	.set_time	= puv3_rtc_settime,
-	.read_alarm	= puv3_rtc_getalarm,
-	.set_alarm	= puv3_rtc_setalarm,
-	.proc	        = puv3_rtc_proc,
-};
-
-static void puv3_rtc_enable(struct device *dev, int en)
-{
-	if (!en) {
-		writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
-	} else {
-		/* re-enable the device, and check it is ok */
-		if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
-			dev_info(dev, "rtc disabled, re-enabling\n");
-			writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
-		}
-	}
-}
-
-static int puv3_rtc_remove(struct platform_device *dev)
-{
-	puv3_rtc_setpie(&dev->dev, 0);
-	puv3_rtc_setaie(&dev->dev, 0);
-
-	release_resource(puv3_rtc_mem);
-	kfree(puv3_rtc_mem);
-
-	return 0;
-}
-
-static int puv3_rtc_probe(struct platform_device *pdev)
-{
-	struct rtc_device *rtc;
-	struct resource *res;
-	int ret;
-
-	dev_dbg(&pdev->dev, "%s: probe=%p\n", __func__, pdev);
-
-	/* find the IRQs */
-	puv3_rtc_tickno = platform_get_irq(pdev, 1);
-	if (puv3_rtc_tickno < 0)
-		return -ENOENT;
-
-	puv3_rtc_alarmno = platform_get_irq(pdev, 0);
-	if (puv3_rtc_alarmno < 0)
-		return -ENOENT;
-
-	dev_dbg(&pdev->dev, "PKUnity_rtc: tick irq %d, alarm irq %d\n",
-		 puv3_rtc_tickno, puv3_rtc_alarmno);
-
-	rtc = devm_rtc_allocate_device(&pdev->dev);
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
-
-	ret = devm_request_irq(&pdev->dev, puv3_rtc_alarmno, puv3_rtc_alarmirq,
-			       0, "pkunity-rtc alarm", rtc);
-	if (ret) {
-		dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret);
-		return ret;
-	}
-
-	ret = devm_request_irq(&pdev->dev, puv3_rtc_tickno, puv3_rtc_tickirq,
-			       0, "pkunity-rtc tick", rtc);
-	if (ret) {
-		dev_err(&pdev->dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret);
-		return ret;
-	}
-
-	/* get the memory region */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to get memory region resource\n");
-		return -ENOENT;
-	}
-
-	puv3_rtc_mem = request_mem_region(res->start, resource_size(res),
-					  pdev->name);
-
-	if (puv3_rtc_mem == NULL) {
-		dev_err(&pdev->dev, "failed to reserve memory region\n");
-		ret = -ENOENT;
-		goto err_nores;
-	}
-
-	puv3_rtc_enable(&pdev->dev, 1);
-
-	/* register RTC and exit */
-	rtc->ops = &puv3_rtcops;
-	rtc->range_max = U32_MAX;
-	ret = rtc_register_device(rtc);
-	if (ret)
-		goto err_nortc;
-
-	/* platform setup code should have handled this; sigh */
-	if (!device_can_wakeup(&pdev->dev))
-		device_init_wakeup(&pdev->dev, 1);
-
-	platform_set_drvdata(pdev, rtc);
-	return 0;
-
- err_nortc:
-	puv3_rtc_enable(&pdev->dev, 0);
-	release_resource(puv3_rtc_mem);
-
- err_nores:
-	return ret;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ticnt_save;
-
-static int puv3_rtc_suspend(struct device *dev)
-{
-	/* save RTAR for anyone using periodic interrupts */
-	ticnt_save = readl(RTC_RTAR);
-	puv3_rtc_enable(dev, 0);
-	return 0;
-}
-
-static int puv3_rtc_resume(struct device *dev)
-{
-	puv3_rtc_enable(dev, 1);
-	writel(ticnt_save, RTC_RTAR);
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(puv3_rtc_pm_ops, puv3_rtc_suspend, puv3_rtc_resume);
-
-static struct platform_driver puv3_rtc_driver = {
-	.probe		= puv3_rtc_probe,
-	.remove		= puv3_rtc_remove,
-	.driver		= {
-		.name	= "PKUnity-v3-RTC",
-		.pm	= &puv3_rtc_pm_ops,
-	}
-};
-
-module_platform_driver(puv3_rtc_driver);
-
-MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
-MODULE_AUTHOR("Hu Dongliang");
-MODULE_LICENSE("GPL v2");
-- 
2.26.2

Powered by blists - more mailing lists