linux-kernel - Re: [PATCH v3 1/2] arm64: dts: Add a device tree for the Librem 5 phone

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1731775c-b94a-043a-c09e-8cca6ad8a8b0@puri.sm>
Date:   Mon, 29 Jun 2020 08:36:34 +0200
From:   Martin Kepplinger <martin.kepplinger@...i.sm>
To:     robh@...nel.org, kernel@...i.sm, shawnguo@...nel.org,
        s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
        linux-imx@....com, mchehab@...nel.org, Anson.Huang@....com,
        agx@...xcpu.org, angus@...ea.ca, broonie@...nel.org
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Daniel Baluta <daniel.baluta@....com>
Subject: Re: [PATCH v3 1/2] arm64: dts: Add a device tree for the Librem 5
 phone

On 17.06.20 09:38, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus@...ea.ca>
> 
> Add a devicetree description for the Librem 5 phone. The early batches
> that have been sold are supported as well as the mass-produced device
> available later this year, see https://puri.sm/products/librem-5/
> 
> This boots to a working console with working WWAN modem, wifi usdhc,
> IMU sensor device, proximity sensor, haptic motor, gpio keys, GNSS and LEDs.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@...i.sm>
> Signed-off-by: Angus Ainslie (Purism) <angus@...ea.ca>
> Signed-off-by: Guido Günther <agx@...xcpu.org>
> For audio related part:
> Reviewed-by: Daniel Baluta <daniel.baluta@....com>
> ---
> 
> revision history
> ----------------
> v3:
> thanks a lot Mark for reviewing! changes since v2:
>  * nicer audio cards names
>  * squash unneeded audio_pwr regulator
>  * remove the unneeded susphy_quirk from dwc3_1 after more testing
>  * add usdhc2 card detect via gpio
>  * add headphone detect for audio card
> 
> v2:
> thanks a lot Marco, Daniel and Pavel for reviewing. changes since v1:
>  * alphabetical sortings / more consistent node names
>  * remove unused regulator and pinctrl descriptions
>  * generic labels for leds, backlight, flash and torch
>  * audio clk settings moved to sai2 node
> https://lore.kernel.org/linux-arm-kernel/20200604084756.586-1-martin.kepplinger@puri.sm/T/
> 
> v1:
> https://lore.kernel.org/linux-arm-kernel/20200514155737.12160-1-martin.kepplinger@puri.sm/
> 
> 
> 
>  arch/arm64/boot/dts/freescale/Makefile        |    1 +
>  .../boot/dts/freescale/imx8mq-librem5.dts     | 1137 +++++++++++++++++
>  2 files changed, 1138 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5.dts
> 

again thanks for reviewing so far. do you have any other objections or
thoughts on this addition?

                            martin