[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGngYiUFh8XexBZK1U2bHcsvHS2LFAXONgLG7HhY7CDQ=LayWg@mail.gmail.com>
Date: Mon, 29 Jun 2020 10:53:33 -0400
From: Sven Van Asbroeck <thesven73@...il.com>
To: Tudor Ambarus <Tudor.Ambarus@...rochip.com>
Cc: Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
linux-mtd@...ts.infradead.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1] mtd: spi-nor: Add support for Winbond w25q64jv spi flash
Hi Tudor,
On Mon, Jun 29, 2020 at 8:50 AM <Tudor.Ambarus@...rochip.com> wrote:
>
> I'm reading the following datasheet:
> https://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf
>
> w25q64jvm (0xef7017) comes with QE bit set to a 0 state, but can be
> set to 1, so Quad mode can be supported. Would you please set SPI_NOR_DUAL_READ
> and SPI_NOR_QUAD_READ flags and test and see if Quad works? If all good,
> please specify in the commit message with which controller you did the tests.
>
Good point !
Unfortunately I'm using the spi controller on an imx6 ("fsl,imx51-ecspi") which
does not support dual or quad mode. So I cannot possibly test this :)
How would you like to proceed? Should I keep this as a private patch, and
wait until someone comes along who can test this on more capable
controller h/w ?
Or should I re-spin the patch without the flags?
Cheers,
Sven
Powered by blists - more mailing lists