| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 30 Jun 2020 10:39:48 +0200
From: Johan Hovold <johan@...nel.org>
To: Lee Jones <lee.jones@...aro.org>
Cc: linux-kernel@...r.kernel.org, Johan Hovold <johan@...nel.org>
Subject: [PATCH] mfd: lm3533: expand control-bank accessors
Expand the control-bank accessors that were implemented using macros.
This allows the definitions of these exported functions to be found more
easily and specifically avoids a W=1 compiler warning due to the
redundant brightness sanity check:
drivers/mfd/lm3533-ctrlbank.c: In function 'lm3533_ctrlbank_set_brightness':
drivers/mfd/lm3533-ctrlbank.c:98:10: warning: comparison is always false due to limited range of data type [-Wtype-limits]
98 | if (val > LM3533_##_NAME##_MAX) \
| ^
drivers/mfd/lm3533-ctrlbank.c:125:1: note: in expansion of macro 'lm3533_ctrlbank_set'
125 | lm3533_ctrlbank_set(brightness, BRIGHTNESS);
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Johan Hovold <johan@...nel.org>
---
drivers/mfd/lm3533-ctrlbank.c | 94 +++++++++++++++++++++--------------
1 file changed, 56 insertions(+), 38 deletions(-)
diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c
index 34fba06ec705..2537dfade51c 100644
--- a/drivers/mfd/lm3533-ctrlbank.c
+++ b/drivers/mfd/lm3533-ctrlbank.c
@@ -17,7 +17,6 @@
#define LM3533_MAX_CURRENT_MAX 29800
#define LM3533_MAX_CURRENT_STEP 800
-#define LM3533_BRIGHTNESS_MAX 255
#define LM3533_PWM_MAX 0x3f
#define LM3533_REG_PWM_BASE 0x14
@@ -89,41 +88,33 @@ int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax)
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_max_current);
-#define lm3533_ctrlbank_set(_name, _NAME) \
-int lm3533_ctrlbank_set_##_name(struct lm3533_ctrlbank *cb, u8 val) \
-{ \
- u8 reg; \
- int ret; \
- \
- if (val > LM3533_##_NAME##_MAX) \
- return -EINVAL; \
- \
- reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \
- ret = lm3533_write(cb->lm3533, reg, val); \
- if (ret) \
- dev_err(cb->dev, "failed to set " #_name "\n"); \
- \
- return ret; \
-} \
-EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_##_name);
-
-#define lm3533_ctrlbank_get(_name, _NAME) \
-int lm3533_ctrlbank_get_##_name(struct lm3533_ctrlbank *cb, u8 *val) \
-{ \
- u8 reg; \
- int ret; \
- \
- reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \
- ret = lm3533_read(cb->lm3533, reg, val); \
- if (ret) \
- dev_err(cb->dev, "failed to get " #_name "\n"); \
- \
- return ret; \
-} \
-EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_##_name);
-
-lm3533_ctrlbank_set(brightness, BRIGHTNESS);
-lm3533_ctrlbank_get(brightness, BRIGHTNESS);
+int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val)
+{
+ u8 reg;
+ int ret;
+
+ reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
+ ret = lm3533_write(cb->lm3533, reg, val);
+ if (ret)
+ dev_err(cb->dev, "failed to set brightness\n");
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_brightness);
+
+int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val)
+{
+ u8 reg;
+ int ret;
+
+ reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
+ ret = lm3533_read(cb->lm3533, reg, val);
+ if (ret)
+ dev_err(cb->dev, "failed to get brightness\n");
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_brightness);
/*
* PWM-input control mask:
@@ -135,9 +126,36 @@ lm3533_ctrlbank_get(brightness, BRIGHTNESS);
* bit 1 - PWM-input enabled in Zone 0
* bit 0 - PWM-input enabled
*/
-lm3533_ctrlbank_set(pwm, PWM);
-lm3533_ctrlbank_get(pwm, PWM);
+int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val)
+{
+ u8 reg;
+ int ret;
+
+ if (val > LM3533_PWM_MAX)
+ return -EINVAL;
+
+ reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
+ ret = lm3533_write(cb->lm3533, reg, val);
+ if (ret)
+ dev_err(cb->dev, "failed to set PWM mask\n");
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_pwm);
+
+int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val)
+{
+ u8 reg;
+ int ret;
+ reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
+ ret = lm3533_read(cb->lm3533, reg, val);
+ if (ret)
+ dev_err(cb->dev, "failed to get PWM mask\n");
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_pwm);
MODULE_AUTHOR("Johan Hovold <jhovold@...il.com>");
MODULE_DESCRIPTION("LM3533 Control Bank interface");
--
2.26.2
Powered by blists - more mailing lists