[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200701194234.18123-1-yannick.fertre@st.com>
Date: Wed, 1 Jul 2020 21:42:34 +0200
From: Yannick Fertre <yannick.fertre@...com>
To: Yannick Fertre <yannick.fertre@...com>,
Philippe Cornu <philippe.cornu@...com>,
Benjamin Gaignard <benjamin.gaignard@...com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<dri-devel@...ts.freedesktop.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH] drm/bridge/synopsys: dsi: add support for non-continuous HS clock
From: Antonio Borneo <antonio.borneo@...com>
Current code enables the HS clock when video mode is started or to
send out a HS command, and disables the HS clock to send out a LP
command. This is not what DSI spec specify.
Enable HS clock either in command and in video mode.
Set automatic HS clock management for panels and devices that
support non-continuous HS clock.
Signed-off-by: Antonio Borneo <antonio.borneo@...com>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index d580b2aa4ce9..979acaa90d00 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -365,7 +365,6 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
if (lpm)
val |= CMD_MODE_ALL_LP;
- dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
dsi_write(dsi, DSI_CMD_MODE_CFG, val);
}
@@ -541,16 +540,22 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
unsigned long mode_flags)
{
+ u32 val;
+
dsi_write(dsi, DSI_PWR_UP, RESET);
if (mode_flags & MIPI_DSI_MODE_VIDEO) {
dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
dw_mipi_dsi_video_mode_config(dsi);
- dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
} else {
dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
}
+ val = PHY_TXREQUESTCLKHS;
+ if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+ val |= AUTO_CLKLANE_CTRL;
+ dsi_write(dsi, DSI_LPCLK_CTRL, val);
+
dsi_write(dsi, DSI_PWR_UP, POWERUP);
}
--
2.17.1
Powered by blists - more mailing lists