[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8036e047-15c6-d259-66c2-c7f625faf759@st.com>
Date: Fri, 10 Jul 2020 08:47:23 +0000
From: Philippe CORNU <philippe.cornu@...com>
To: Yannick FERTRE <yannick.fertre@...com>,
Benjamin GAIGNARD <benjamin.gaignard@...com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
"Alexandre TORGUE" <alexandre.torgue@...com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Antonio BORNEO <antonio.borneo@...com>
Subject: Re: [PATCH] drm/bridge/synopsys: dsi: add support for non-continuous
HS clock
On 7/1/20 9:42 PM, Yannick Fertre wrote:
> From: Antonio Borneo <antonio.borneo@...com>
>
> Current code enables the HS clock when video mode is started or to
> send out a HS command, and disables the HS clock to send out a LP
> command. This is not what DSI spec specify.
>
> Enable HS clock either in command and in video mode.
> Set automatic HS clock management for panels and devices that
> support non-continuous HS clock.
>
> Signed-off-by: Antonio Borneo <antonio.borneo@...com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index d580b2aa4ce9..979acaa90d00 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -365,7 +365,6 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> if (lpm)
> val |= CMD_MODE_ALL_LP;
>
> - dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> }
>
> @@ -541,16 +540,22 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
> static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
> unsigned long mode_flags)
> {
> + u32 val;
> +
> dsi_write(dsi, DSI_PWR_UP, RESET);
>
> if (mode_flags & MIPI_DSI_MODE_VIDEO) {
> dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
> dw_mipi_dsi_video_mode_config(dsi);
> - dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> } else {
> dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> }
>
> + val = PHY_TXREQUESTCLKHS;
> + if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
> + val |= AUTO_CLKLANE_CTRL;
> + dsi_write(dsi, DSI_LPCLK_CTRL, val);
> +
> dsi_write(dsi, DSI_PWR_UP, POWERUP);
> }
>
>
(+ Antonio)
Hi Yannick & Antonio,
Reviewed-by: Philippe Cornu <philippe.cornu@...com>
Tested-by: Philippe Cornu <philippe.cornu@...com>
(Tested with the 3 patches named
drm/bridge/synopsys: dsi: allow LP commands in video mode
drm/bridge/synopsys: dsi: allow sending longer LP commands
drm/bridge/synopsys: dsi: add support for non-continuous HS clock
on various dsi bridges + stm32mp157 disco board)
Many thanks
Philippe :-)
Powered by blists - more mailing lists