| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200703010611.GA100794@roeck-us.net>
Date: Thu, 2 Jul 2020 18:06:11 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Chu Lin <linchuyuan@...gle.com>
Cc: jdelvare@...e.com, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org, jasonling@...gle.com,
belgaied@...gle.com, zhongqil@...gle.com
Subject: Re: [PATCH] hwmon:max6697: Allow max6581 to create tempX_offset
attributes
On Thu, Jul 02, 2020 at 01:42:23AM +0000, Chu Lin wrote:
> Per max6581, reg 4d and reg 4e is used for temperature read offset.
> This patch will let the user specify the temperature read offset for
> max6581. This patch is tested on max6581 and only applies to max6581.
>
> Testing:
> echo 16250 > temp2_offset
> cat temp2_offset
> 16250
>
> echo 17500 > temp3_offset
> cat temp3_offset
> 17500
> cat temp4_offset
> 0
> cat temp2_offset
> 17500
>
> echo 0 > temp2_offset
> cat temp2_offset
> 0
> cat temp3_offset
> 17500
>
> echo -0 > temp2_offset
> cat temp2_offset
> 0
>
> echo -100000 > temp2_offset
> -sh: echo: write error: Invalid argument
>
> cat temp2_input
> 37000
>
> echo 10000 > temp2_offset
> cat temp2_input
> 47125
>
> echo -2000 > temp2_offset
> cat temp2_input
> 34875
>
> echo -0 > temp2_offset
> cat temp2_input
> 37000
>
> Signed-off-by: Chu Lin <linchuyuan@...gle.com>
Please run "checkpatch --strict" and fix everything it reports.
> ---
> drivers/hwmon/max6697.c | 129 ++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 125 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c
> index 743752a2467a..b11fcb594807 100644
> --- a/drivers/hwmon/max6697.c
> +++ b/drivers/hwmon/max6697.c
> @@ -41,6 +41,14 @@ static const u8 MAX6697_REG_CRIT[] = {
> #define MAX6697_MAP_BITS(reg) ((((reg) & 0x7e) >> 1) | \
> (((reg) & 0x01) << 6) | ((reg) & 0x80))
>
> +#define MAX6581_OFFSET_TO_MILLIC(reg) (16000 * (((reg) & (1<<6)) >> 6) + \
> + 8000 * (((reg) & (1<<5)) >> 5) + \
> + 4000 * (((reg) & (1<<4)) >> 4) + \
> + 2000 * (((reg) & (1<<3)) >> 3) + \
> + 1000 * (((reg) & (1<<2)) >> 2) + \
> + 500 * (((reg) & (1<<1)) >> 1) + \
> + 250 * ((reg) & 1))
Why not just the following ?
#define MAX6581_OFFSET_TO_MILLIC(reg) ((reg) * 250)
> +
> #define MAX6697_REG_STAT(n) (0x44 + (n))
>
> #define MAX6697_REG_CONFIG 0x41
> @@ -56,6 +64,9 @@ static const u8 MAX6697_REG_CRIT[] = {
> #define MAX6581_REG_IDEALITY_SELECT 0x4c
> #define MAX6581_REG_OFFSET 0x4d
> #define MAX6581_REG_OFFSET_SELECT 0x4e
> +#define MAX6581_OFFSET_MIN -31750
> +#define MAX6581_OFFSET_MAX -MAX6581_OFFSET_MIN
> +
Why the double negation ?
#define MAX6581_OFFSET_MIN -31750
#define MAX6581_OFFSET_MAX 31750
or
#define MAX6581_OFFSET_MAX 31750
#define MAX6581_OFFSET_MIN -MAX6581_OFFSET_MAX
>
> #define MAX6697_CONV_TIME 156 /* ms per channel, worst case */
>
> @@ -316,6 +327,94 @@ static ssize_t temp_store(struct device *dev,
> return ret < 0 ? ret : count;
> }
>
> +static ssize_t offset_store(struct device *dev,
> + struct device_attribute *devattr, const char *buf,
> + size_t count)
> +{
> + long temp;
> + u8 val, select;
> + int i, temp_frac, temp_int, ret, index;
> + bool sign;
> + struct max6697_data *data;
> +
> + index = to_sensor_dev_attr(devattr)->index;
> + data = dev_get_drvdata(dev);
> + select = i2c_smbus_read_byte_data(data->client,
> + MAX6581_REG_OFFSET_SELECT);
> + if (select < 0)
> + return -ENODATA;
Please return the error.
> + ret = kstrtol(buf, 10, &temp);
> + if (ret < 0)
> + return ret;
> + if (temp > MAX6581_OFFSET_MAX || temp < MAX6581_OFFSET_MIN)
> + return -EINVAL;
Please use clamp_val() to limit the range. We don't expect users to know
chip limits / restrictions.
> +
> + /* disable the offset for channel */
> + if (temp == 0) {
> + ret = i2c_smbus_write_byte_data(data->client,
> + MAX6581_REG_OFFSET_SELECT,
> + select & ~(1<<(index-1)));
> + return ret < 0 ? ret : count;
> + }
> + sign = temp < 0 ? false : true;
> + temp = abs(temp);
> + temp_int = temp / 1000;
> + temp_frac = temp % 1000;
> + for (i = 4; i >= 0 && temp_int > 0; --i) {
> + if (temp_int >= 1<<i) {
> + temp_int -= 1<<i;
> + val |= 1 << (i+2);
> + }
> + }
> + /* special handle the fraction */
> + if (temp_frac % 250 != 0)
> + return -EINVAL;
> + if (temp_frac == 750)
> + val |= 0x3;
> + else if (temp_frac == 500)
> + val |= 0x2;
> + else if (temp_frac)
> + val |= 0x1;
This is way too complicated.
sign = temp < 0;
temp = clamp_val(abs(temp), 0, MAX6581_OFFSET_MAX);
reg = DIV_ROUND_CLOSEST(temp, 250);
if (sign)
reg |= (1 << 7);
should accomplish the same.
> + ret = i2c_smbus_write_byte_data(data->client,
> + MAX6581_REG_OFFSET_SELECT,
> + select | 1<<(index-1));
> + if (ret < 0)
> + return ret;
> + ret = i2c_smbus_write_byte_data(data->client,
> + MAX6581_REG_OFFSET,
> + sign?val:(~val + 1));
> + return ret < 0 ? ret : count;
Since this function requires multiple i2c accesses, it needs to be
mutex protected.
> +}
> +
> +static ssize_t offset_show(struct device *dev, struct device_attribute *devattr,
> + char *buf)
> +{
> + int select, ret, index, temp;
> + struct max6697_data *data;
> +
> + index = to_sensor_dev_attr(devattr)->index;
> + data = dev_get_drvdata(dev);
> + select = i2c_smbus_read_byte_data(data->client,
> + MAX6581_REG_OFFSET_SELECT);
> + if (select < 0)
> + return -ENODATA;
> + if (select & (1<<(index-1))) {
> + ret = i2c_smbus_read_byte_data(data->client,
> + MAX6581_REG_OFFSET);
> + if (ret < 0)
> + return -ENODATA;
> + } else {
> + return sprintf(buf, "%d\n", 0);
> + }
> + if (1<<7 & ret) {
Not believer in Yoda Programming I am.
> + ret = ~ret + 1;
> + temp = -MAX6581_OFFSET_TO_MILLIC(ret);
> + } else {
> + temp = MAX6581_OFFSET_TO_MILLIC(ret);
> + }
Negative vlaues should be handled in MAX6581_OFFSET_TO_MILLIC().
If necessary / too complex, make it a function.
> + return sprintf(buf, "%d\n", temp);
> +}
> +
> static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
> static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, 0, MAX6697_TEMP_MAX);
> static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, 0, MAX6697_TEMP_CRIT);
> @@ -374,6 +473,16 @@ static SENSOR_DEVICE_ATTR_RO(temp6_fault, alarm, 5);
> static SENSOR_DEVICE_ATTR_RO(temp7_fault, alarm, 6);
> static SENSOR_DEVICE_ATTR_RO(temp8_fault, alarm, 7);
>
> +/* There is no offset for local temperature so starting from temp2 */
If so ...
> +static SENSOR_DEVICE_ATTR_RW(temp1_offset, offset, 0);
then why an attribute for temp1_offset ? Guess it is a dummy,
which is a waste. Just use dummy again.
> +static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 1);
> +static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 2);
> +static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 3);
> +static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 4);
> +static SENSOR_DEVICE_ATTR_RW(temp6_offset, offset, 5);
> +static SENSOR_DEVICE_ATTR_RW(temp7_offset, offset, 6);
> +static SENSOR_DEVICE_ATTR_RW(temp8_offset, offset, 7);
> +
> static DEVICE_ATTR(dummy, 0, NULL, NULL);
>
> static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
> @@ -382,8 +491,8 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
> struct device *dev = container_of(kobj, struct device, kobj);
> struct max6697_data *data = dev_get_drvdata(dev);
> const struct max6697_chip_data *chip = data->chip;
> - int channel = index / 6; /* channel number */
> - int nr = index % 6; /* attribute index within channel */
> + int channel = index / 8; /* channel number */
> + int nr = index % 7; /* attribute index within channel */
>
> if (channel >= chip->channels)
> return 0;
> @@ -392,6 +501,10 @@ static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
> return 0;
> if (nr == 5 && !(chip->have_fault & (1 << channel)))
> return 0;
> + /* offset reg is only supported on max6581 remote channels */
> + if (nr == 6)
> + if (data->type != max6581 || channel == 0)
> + return 0;
>
> return attr->mode;
> }
> @@ -408,6 +521,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp1_crit.dev_attr.attr,
> &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
> &dev_attr_dummy.attr,
> + &sensor_dev_attr_temp1_offset.dev_attr.attr,
>
> &sensor_dev_attr_temp2_input.dev_attr.attr,
> &sensor_dev_attr_temp2_max.dev_attr.attr,
> @@ -415,6 +529,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp2_crit.dev_attr.attr,
> &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
> &sensor_dev_attr_temp2_fault.dev_attr.attr,
> + &sensor_dev_attr_temp2_offset.dev_attr.attr,
>
> &sensor_dev_attr_temp3_input.dev_attr.attr,
> &sensor_dev_attr_temp3_max.dev_attr.attr,
> @@ -422,6 +537,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp3_crit.dev_attr.attr,
> &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
> &sensor_dev_attr_temp3_fault.dev_attr.attr,
> + &sensor_dev_attr_temp3_offset.dev_attr.attr,
>
> &sensor_dev_attr_temp4_input.dev_attr.attr,
> &sensor_dev_attr_temp4_max.dev_attr.attr,
> @@ -429,6 +545,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp4_crit.dev_attr.attr,
> &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
> &sensor_dev_attr_temp4_fault.dev_attr.attr,
> + &sensor_dev_attr_temp4_offset.dev_attr.attr,
>
> &sensor_dev_attr_temp5_input.dev_attr.attr,
> &sensor_dev_attr_temp5_max.dev_attr.attr,
> @@ -436,6 +553,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp5_crit.dev_attr.attr,
> &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
> &sensor_dev_attr_temp5_fault.dev_attr.attr,
> + &sensor_dev_attr_temp5_offset.dev_attr.attr,
>
> &sensor_dev_attr_temp6_input.dev_attr.attr,
> &sensor_dev_attr_temp6_max.dev_attr.attr,
> @@ -443,6 +561,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp6_crit.dev_attr.attr,
> &sensor_dev_attr_temp6_crit_alarm.dev_attr.attr,
> &sensor_dev_attr_temp6_fault.dev_attr.attr,
> + &sensor_dev_attr_temp6_offset.dev_attr.attr,
>
> &sensor_dev_attr_temp7_input.dev_attr.attr,
> &sensor_dev_attr_temp7_max.dev_attr.attr,
> @@ -450,6 +569,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp7_crit.dev_attr.attr,
> &sensor_dev_attr_temp7_crit_alarm.dev_attr.attr,
> &sensor_dev_attr_temp7_fault.dev_attr.attr,
> + &sensor_dev_attr_temp7_offset.dev_attr.attr,
>
> &sensor_dev_attr_temp8_input.dev_attr.attr,
> &sensor_dev_attr_temp8_max.dev_attr.attr,
> @@ -457,6 +577,7 @@ static struct attribute *max6697_attributes[] = {
> &sensor_dev_attr_temp8_crit.dev_attr.attr,
> &sensor_dev_attr_temp8_crit_alarm.dev_attr.attr,
> &sensor_dev_attr_temp8_fault.dev_attr.attr,
> + &sensor_dev_attr_temp8_offset.dev_attr.attr,
> NULL
> };
>
> @@ -493,8 +614,8 @@ static void max6697_get_config_of(struct device_node *node,
> }
> prop = of_get_property(node, "transistor-ideality", &len);
> if (prop && len == 2 * sizeof(u32)) {
> - pdata->ideality_mask = be32_to_cpu(prop[0]);
> - pdata->ideality_value = be32_to_cpu(prop[1]);
> + pdata->ideality_mask = be32_to_cpu(prop[0]);
> + pdata->ideality_value = be32_to_cpu(prop[1]);
> }
> }
>
Powered by blists - more mailing lists