[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1fda46f1-6484-e128-8851-0f42fc92d844@roeck-us.net>
Date: Tue, 7 Jul 2020 20:50:56 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Chris Ruehl <chris.ruehl@...ys.com.hk>
Cc: Jack Lo <jack.lo@...ys.com.hk>, devicetree@...r.kernel.org,
Jean Delvare <jdelvare@...e.com>,
Rob Herring <robh+dt@...nel.org>, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
On 7/7/20 8:34 PM, Chris Ruehl wrote:
> Hi Guenter,
>
> On 7/7/2020 9:35 pm, Guenter Roeck wrote:
>> On Tue, Jul 07, 2020 at 04:01:03PM +0800, Chris Ruehl wrote:
>>> Add documentation for the newly added DTS support in the shtc1 driver.
>>> To align with the drivers logic to have high precision by default
>>> a boolean sensirion,low_precision is used to switch to low precision.
>>>
>>> Signed-off-by: Chris Ruehl <chris.ruehl@...ys.com.hk>
>>> ---
>>> .../bindings/hwmon/sensirion,shtc1.yaml | 53 +++++++++++++++++++
>>> 1 file changed, 53 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>>> new file mode 100644
>>> index 000000000000..bcccdcadd86b
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>>> @@ -0,0 +1,53 @@
>>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Sensirion SHTC1 Humidity and Temperature Sensor IC
>>> +
>>> +maintainers:
>>> + - jdelvare@...e.com
>>
>> Did Jean agree to maintain this file ?
>
> I thought its OK to set the maintainer from the list shown with
> get_maintainer.pl here. I don't mind take care of this file - there will be small changes only in case the dt-schema change and requires updates.
>
No, it isn't. Jean and I are the maintainers for the hwmon
subsystem, but that doesn't mean or suggest that we should
be listed as maintainers in individual files.
> I put me here, if that is acceptable.
>
Either you, or none.
Thanks,
Guenter
> Chris
>
>>
>>> +
>>> +description: |
>>> + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
>>> + designed especially for battery-driven high-volume consumer electronics
>>> + applications.
>>> + For further information refere to Documentation/hwmon/shtc1.rst
>>> +
>>> + This binding document describes the binding for the hardware monitor
>>> + portion of the driver.
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - sensirion,shtc1
>>> + - sensirion,shtw1
>>> + - sensirion,shtc3
>>> +
>>> + reg: I2C address 0x70
>>> +
>>> +Optional properties:
>>> + sensirion,blocking_io: |
>>> + bool, if set the i2c bus hold until measure finished
>>> + sensirion,low_precision: |
>>> + bool, if set aquire data with low precision (not recommend)
>>
>> recommended
>>
>> It might make sense to mention that the default is expected to be high precision
>> if not specified.
>>
>>> +
>>> +required:
>>> + - compatible
>>> + - reg
>>> +
>>> +additionalProperties: false
>>> +
>>> +Example:
>>> + &i2c1 {
>>> + status = "okay";
>>> + clock-frequency = <400000>;
>>> +
>>> + shtc3@70 {
>>> + compatible = "sensirion,shtc3";
>>> + reg = <0x70>
>>> + sensirion,blocking_io;
>>> + status = "okay";
>>> + };
>>> + };
>>> --
>>> 2.20.1
>>>
>
Powered by blists - more mailing lists