[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <40330886-9943-d3ae-3c28-f2baa9c73ade@gtsys.com.hk>
Date: Wed, 8 Jul 2020 11:34:06 +0800
From: Chris Ruehl <chris.ruehl@...ys.com.hk>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Jack Lo <jack.lo@...ys.com.hk>, devicetree@...r.kernel.org,
Jean Delvare <jdelvare@...e.com>,
Rob Herring <robh+dt@...nel.org>, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
Hi Guenter,
On 7/7/2020 9:35 pm, Guenter Roeck wrote:
> On Tue, Jul 07, 2020 at 04:01:03PM +0800, Chris Ruehl wrote:
>> Add documentation for the newly added DTS support in the shtc1 driver.
>> To align with the drivers logic to have high precision by default
>> a boolean sensirion,low_precision is used to switch to low precision.
>>
>> Signed-off-by: Chris Ruehl <chris.ruehl@...ys.com.hk>
>> ---
>> .../bindings/hwmon/sensirion,shtc1.yaml | 53 +++++++++++++++++++
>> 1 file changed, 53 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>> new file mode 100644
>> index 000000000000..bcccdcadd86b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>> @@ -0,0 +1,53 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Sensirion SHTC1 Humidity and Temperature Sensor IC
>> +
>> +maintainers:
>> + - jdelvare@...e.com
>
> Did Jean agree to maintain this file ?
I thought its OK to set the maintainer from the list shown with
get_maintainer.pl here. I don't mind take care of this file - there will be
small changes only in case the dt-schema change and requires updates.
I put me here, if that is acceptable.
Chris
>
>> +
>> +description: |
>> + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
>> + designed especially for battery-driven high-volume consumer electronics
>> + applications.
>> + For further information refere to Documentation/hwmon/shtc1.rst
>> +
>> + This binding document describes the binding for the hardware monitor
>> + portion of the driver.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - sensirion,shtc1
>> + - sensirion,shtw1
>> + - sensirion,shtc3
>> +
>> + reg: I2C address 0x70
>> +
>> +Optional properties:
>> + sensirion,blocking_io: |
>> + bool, if set the i2c bus hold until measure finished
>> + sensirion,low_precision: |
>> + bool, if set aquire data with low precision (not recommend)
>
> recommended
>
> It might make sense to mention that the default is expected to be high precision
> if not specified.
>
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +Example:
>> + &i2c1 {
>> + status = "okay";
>> + clock-frequency = <400000>;
>> +
>> + shtc3@70 {
>> + compatible = "sensirion,shtc3";
>> + reg = <0x70>
>> + sensirion,blocking_io;
>> + status = "okay";
>> + };
>> + };
>> --
>> 2.20.1
>>
--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521
Disclaimer: https://www.gtsys.com.hk/email/classified.html
Powered by blists - more mailing lists