linux-kernel - Re: [RESEND v2] arm64: dts: imx8m: Add NOC nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200711142642.GJ21277@dragon>
Date:   Sat, 11 Jul 2020 22:26:43 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Abel Vesa <abel.vesa@....com>
Cc:     Georgi Djakov <georgi.djakov@...aro.org>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Leonard Crestez <cdleonard@...il.com>,
        Rob Herring <robh@...nel.org>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-arm-kernel@...ts.infradead.org,
        Leonard Crestez <leonard.crestez@....com>
Subject: Re: [RESEND v2] arm64: dts: imx8m: Add NOC nodes

On Tue, Jul 07, 2020 at 12:13:26AM +0300, Abel Vesa wrote:
> From: Leonard Crestez <leonard.crestez@....com>
> 
> Add nodes for the main interconnect of the imx8m series chips.
> 
> These nodes are bound to by devfreq and interconnect drivers.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@....com>
> Signed-off-by: Abel Vesa <abel.vesa@....com>
> Tested-by: Martin Kepplinger <martin.kepplinger@...i.sm>
> Acked-by: Georgi Djakov <georgi.djakov@...aro.org>
> ---
> 
> Changes since v1:
>  - picked up the bindinds header which were part of the original patch
>    from Leonard
> 
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 24 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi | 24 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 24 ++++++++++++++++++++++++
>  3 files changed, 72 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 76f040e..970d132 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mm.h>
>  
>  #include "imx8mm-pinfunc.h"
>  
> @@ -877,6 +878,29 @@
>  
>  		};
>  
> +		noc: interconnect@...00000 {
> +			compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MM_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			#interconnect-cells = <1>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-150M {
> +					opp-hz = /bits/ 64 <150000000>;
> +				};

Please have a newline between nodes.

Shawn

> +				opp-375M {
> +					opp-hz = /bits/ 64 <375000000>;
> +				};
> +				opp-750M {
> +					opp-hz = /bits/ 64 <750000000>;
> +				};
> +			};
> +		};
> +
>  		aips4: bus@...00000 {
>  			compatible = "fsl,aips-bus", "simple-bus";
>  			reg = <0x32c00000 0x400000>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 9385dd7..cd38aae 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mn.h>
>  
>  #include "imx8mn-pinfunc.h"
>  
> @@ -764,6 +765,29 @@
>  
>  		};
>  
> +		noc: interconnect@...00000 {
> +			compatible = "fsl,imx8mn-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MN_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			#interconnect-cells = <1>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-100M {
> +					opp-hz = /bits/ 64 <100000000>;
> +				};
> +				opp-600M {
> +					opp-hz = /bits/ 64 <600000000>;
> +				};
> +				opp-800M {
> +					opp-hz = /bits/ 64 <800000000>;
> +				};
> +			};
> +		};
> +
>  		aips4: bus@...00000 {
>  			compatible = "fsl,aips-bus", "simple-bus";
>  			reg = <0x32c00000 0x400000>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index f70435c..d585650 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -11,6 +11,7 @@
>  #include "dt-bindings/input/input.h"
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mq.h>
>  #include "imx8mq-pinfunc.h"
>  
>  / {
> @@ -1045,6 +1046,29 @@
>  			};
>  		};
>  
> +		noc: interconnect@...00000 {
> +			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MQ_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			#interconnect-cells = <1>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-133M {
> +					opp-hz = /bits/ 64 <133333333>;
> +				};
> +				opp-400M {
> +					opp-hz = /bits/ 64 <400000000>;
> +				};
> +				opp-800M {
> +					opp-hz = /bits/ 64 <800000000>;
> +				};
> +			};
> +		};
> +
>  		bus@...00000 { /* AIPS4 */
>  			compatible = "fsl,aips-bus", "simple-bus";
>  			reg = <0x32c00000 0x400000>;
> -- 
> 2.7.4
>