linux-kernel - Re: [PATCH 2/2] dt-bindings: net: dsa: qca8k: Add PORT0_PAD

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <64bbedb0-d985-668e-fb50-ffefdf3050e4@phrozen.org>
Date:   Fri, 17 Jul 2020 22:48:04 +0200
From:   John Crispin <john@...ozen.org>
To:     Florian Fainelli <f.fainelli@...il.com>,
        Matthew Hagan <mnhagan88@...il.com>,
        Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>
Cc:     Vivien Didelot <vivien.didelot@...il.com>,
        "David S. Miller" <davem@...emloft.net>, linux@...linux.org.uk,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Jonathan McDowell <noodles@...th.li>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH 2/2] dt-bindings: net: dsa: qca8k: Add PORT0_PAD_CTRL
 properties


On 17.07.20 22:39, Florian Fainelli wrote:
>
> On 7/17/2020 1:29 PM, Matthew Hagan wrote:
>>
>> On 16/07/2020 23:09, Jakub Kicinski wrote:
>>> On Mon, 13 Jul 2020 21:50:26 +0100 Matthew Hagan wrote:
>>>> Add names and decriptions of additional PORT0_PAD_CTRL properties.
>>>>
>>>> Signed-off-by: Matthew Hagan <mnhagan88@...il.com>
>>>> ---
>>>>   Documentation/devicetree/bindings/net/dsa/qca8k.txt | 8 ++++++++
>>>>   1 file changed, 8 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
>>>> index ccbc6d89325d..3d34c4f2e891 100644
>>>> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
>>>> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
>>>> @@ -13,6 +13,14 @@ Optional properties:
>>>>   
>>>>   - reset-gpios: GPIO to be used to reset the whole device
>>>>   
>>>> +Optional MAC configuration properties:
>>>> +
>>>> +- qca,exchange-mac0-mac6:	If present, internally swaps MAC0 and MAC6.
>>> Perhaps we can say a little more here?
>>>
>>  From John's patch:
>> "The switch allows us to swap the internal wirering of the two cpu ports.
>> For the HW offloading to work the ethernet MAC conencting to the LAN
>> ports must be wired to cpu port 0. There is HW in the wild that does not
>> fulfill this requirement. On these boards we need to swap the cpu ports."
>>
>> This option is somewhat linked to instances where both MAC0 and MAC6 are
>> used as CPU ports. I may omit this for now since support for this hasn't
>> been added and MAC0 is hard-coded as the CPU port. The initial intention
>> here was to cover options commonly set by OpenWrt devices, based upon
>> their ar8327-initvals, to allow migration to qca8k.
> If you update the description of the property, I do not see a reason why
> this should not be supported as of today, sooner or later you will need
> it to convert more devices to qca8k as you say.

correct, there will be patches soonish to make qcom dakota and 
hawkeye/cypress use qca8k as their switch fabric is 95% identical.  we 
already started working on it. it is mmio based rather than mdio based, 
so the patch is quite a large rework right now.

     John