Date:   Fri, 24 Jul 2020 11:43:34 +0200
From:   Hans Verkuil <hverkuil@...all.nl>
To:     Sowjanya Komatineni <skomatineni@...dia.com>,
        thierry.reding@...il.com, jonathanh@...dia.com, frankc@...dia.com,
        sakari.ailus@....fi, robh+dt@...nel.org, helen.koike@...labora.com
Cc:     digetx@...il.com, sboyd@...nel.org, gregkh@...uxfoundation.org,
        linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-i2c@...r.kernel.org
Subject: Re: [RFC PATCH v4 00/14] Support for Tegra video capture from
 external sensor

Thierry, Dmitry,

I'm happy with this series from a media perspective. However, patches 1-5 fix
various i2c-tegra.c issues and patch 12 changes mipi calibration functions in
drivers/gpu that patch 13 relies on.

I think the i2c-tegra.c patches can be merged independently into the i2c
subsystem, but patch 12 needs to be merged with the media patches. So for patch
12 I need an Acked-by from Thierry.

I can also take the i2c-tegra patches if preferred, but there too I need Acks.
Dmitry, can you either take these i2c patches, or reply with Acks if you want
me to take it?

Regards,

	Hans


On 24/07/2020 01:50, Sowjanya Komatineni wrote:
> This series adds support for video capture from external camera sensor to
> Tegra video driver.
> 
> Jetson TX1 has camera expansion connector and supports custom camera module
> designed as per TX1 design specification.
> 
> This series also enables camera capture support for Jetson Nano which has
> Raspberry PI camera header.
> 
> This series is tested with IMX219 camera sensor.
> 
> This series include,
> 
> VI I2C related fixes
> - Camera sensor programming happens through VI I2C which is on host1x bus.
> - These patches includes device tree and I2C driver fixes for VI I2C.
> 
> Tegra video driver updates
> - TPG Vs Non-TPG based on Kconfig
> - Support for external sensor video capture based on device graph from DT.
> - Support for selection ioctl operations
> - Tegra MIPI CSI pads calibration
> - CSI T-CLK and T-HS settle time computation based on clock rates.
> 
> Host1x driver updates
> - Adds API to allow creating mipi device for specific device node.
> - Splits MIPI pads calibrate start and waiting for calibration to be done.
> 
> Device tree updates
> - Adds camera connector 2V8, 1V8, 1V2 regulator supplies to Jetson TX1 DT.
> - Enabled VI and CSI support in Jetson Nano DT.
> 
> 
> Delta between patch versions:
> [v4]:	Includes below fix based on v3 feedback
> 	- Patches are based on latest linux-next.
> 	- With split of tegra_mipi_calibrate() and tegra_mipi_wait(), mipi
> 	  clock is not left enabled till calibration done. This series adds
> 	  a patch to fix this by keeping clock enabled till calibration is
> 	  done.
> 
> 	Note:
> 	Patch-0010 has compilation dependency on
> 	https://patchwork.kernel.org/patch/11659521/
> 
> [v3]:	Includes v2 feedback
> 	- Uses separate helper function for retrieving remote csi subdevice
> 	  and source subdevice.
> 	- Added check for presence of subdevice ops set/get_selection
> 	- dropped vb2_queue_release from driver and using
> 	  vb2_video_unregister_device instead of video_unregister_device.
> 	- video device register should happen in the last after all video
> 	  device related setup is done in the driver. This is being addressed
> 	  in below RFC patch. Once proper implementation of this is available
> 	  will update Tegra video driver to use split APIs and do all setup
> 	  prior to device register. Added this as TODO in the driver.
> 	  https://www.spinics.net/lists/linux-media/msg172761.html
> 
> 	Note:
> 	Patch-0012 has compilation dependency on
> 	https://patchwork.kernel.org/patch/11659521/
> 
> 
> [v2]:	Includes below changes based on v1 feedback
> 	- dt-binding document and the driver update for device graph to use
> 	  separate ports for sink endpoint and source endpoint for csi.
> 	- Use data-lanes endpoint property for csi.
> 	- Update tegra_mipi_request() to take device node pointer argument
> 	  rather than adding extra API.
> 	- Remove checking for clk pointer before clk_disable.
> 
> 
> Sowjanya Komatineni (14):
>   i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM
>   i2c: tegra: Remove NULL pointer check before
>     clk_enable/disable/prepare/unprepare
>   i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
>   i2c: tegra: Fix runtime resume to re-init VI I2C
>   i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
>   media: tegra-video: Fix channel format alignment
>   media: tegra-video: Enable TPG based on kernel config
>   media: tegra-video: Update format lookup to offset based
>   dt-bindings: tegra: Update VI and CSI bindings with port info
>   media: tegra-video: Add support for external sensor capture
>   media: tegra-video: Add support for selection ioctl ops
>   gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done
>   media: tegra-video: Add CSI MIPI pads calibration
>   media: tegra-video: Compute settle times based on the clock rate
> 
>  .../display/tegra/nvidia,tegra20-host1x.txt        |  92 ++-
>  drivers/gpu/drm/tegra/dsi.c                        |   4 +-
>  drivers/gpu/host1x/mipi.c                          |  19 +-
>  drivers/i2c/busses/i2c-tegra.c                     | 101 +--
>  drivers/staging/media/tegra-video/Kconfig          |   7 +
>  drivers/staging/media/tegra-video/csi.c            | 258 ++++++-
>  drivers/staging/media/tegra-video/csi.h            |   8 +
>  drivers/staging/media/tegra-video/tegra210.c       |  25 +-
>  drivers/staging/media/tegra-video/vi.c             | 800 +++++++++++++++++++--
>  drivers/staging/media/tegra-video/vi.h             |  25 +-
>  drivers/staging/media/tegra-video/video.c          |  23 +-
>  include/linux/host1x.h                             |   5 +-
>  12 files changed, 1224 insertions(+), 143 deletions(-)
> 

Powered by blists - more mailing lists