| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200806185121.19688-1-mjeanson@efficios.com>
Date: Thu, 6 Aug 2020 14:51:21 -0400
From: Michael Jeanson <mjeanson@...icios.com>
To: David Ahern <dsahern@...nel.org>
Cc: linux-kernel@...r.kernel.org,
Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
Michael Jeanson <mjeanson@...icios.com>,
"David S . Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: [PATCH] selftests: Add VRF icmp error route lookup test
The objective is to check that the incoming vrf routing table is selected
to send an ICMP error back to the source when the ttl of a packet reaches 1
while it is forwarded between different vrfs.
The first test sends a ping with a ttl of 1 from h1 to h2 and parses the
output of the command to check that a ttl expired error is received.
[This may be flaky, I'm open to suggestions of a more robust approch.]
The second test runs traceroute from h1 to h2 and parses the output to
check for a hop on r1.
Signed-off-by: Michael Jeanson <mjeanson@...icios.com>
Cc: David Ahern <dsahern@...nel.org>
Cc: David S. Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org
---
tools/testing/selftests/net/Makefile | 1 +
.../selftests/net/vrf_icmp_error_route.sh | 429 ++++++++++++++++++
2 files changed, 430 insertions(+)
create mode 100755 tools/testing/selftests/net/vrf_icmp_error_route.sh
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 895ec992b2f1..2fc72bc2908c 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -17,6 +17,7 @@ TEST_PROGS += route_localnet.sh
TEST_PROGS += reuseaddr_ports_exhausted.sh
TEST_PROGS += txtimestamp.sh
TEST_PROGS += vrf-xfrm-tests.sh
+TEST_PROGS += vrf_icmp_error_route.sh
TEST_PROGS_EXTENDED := in_netns.sh
TEST_GEN_FILES = socket nettest
TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any
diff --git a/tools/testing/selftests/net/vrf_icmp_error_route.sh b/tools/testing/selftests/net/vrf_icmp_error_route.sh
new file mode 100755
index 000000000000..0b15a886bf5b
--- /dev/null
+++ b/tools/testing/selftests/net/vrf_icmp_error_route.sh
@@ -0,0 +1,429 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019 David Ahern <dsahern@...il.com>. All rights reserved.
+# Copyright (c) 2020 Michael Jeanson <mjeanson@...icios.com>. All rights reserved.
+#
+# blue red
+# .253 +----+ .253
+# +----| r1 |----+
+# | +----+ |
+# +----+ | | +----+
+# | h1 |--------------+ +--------------| h2 |
+# +----+ .1 | | .2 +----+
+# 172.16.1/24 | +----+ | 172.16.2/24
+# 2001:db8:16:1/64 +----| r2 |----+ 2001:db8:16:2/64
+# .254 +----+ .254
+#
+#
+# Route from h1 to h2 goes through r1, incoming vrf blue has a route to the
+# outgoing vrf red for the n2 network but red doesn't have a route back to n1.
+# Route from h2 to h1 goes through r2.
+#
+# The objective is to check that the incoming vrf routing table is selected
+# to send an ICMP error back to the source when the ttl of a packet reaches 1
+# while it is forwarded between different vrfs.
+#
+# The first test sends a ping with a ttl of 1 from h1 to h2 and parses the
+# output of the command to check that a ttl expired error is received.
+#
+# The second test runs traceroute from h1 to h2 and parses the output to check
+# for a hop on r1.
+#
+# Requires CONFIG_NET_VRF, CONFIG_VETH, CONFIG_BRIDGE and CONFIG_NET_NS.
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+
+H1_N1_IP=172.16.1.1
+R1_N1_IP=172.16.1.253
+R2_N1_IP=172.16.1.254
+
+H1_N1_IP6=2001:db8:16:1::1
+R1_N1_IP6=2001:db8:16:1::253
+R2_N1_IP6=2001:db8:16:1::254
+
+H2_N2=172.16.2.0/24
+H2_N2_6=2001:db8:16:2::/64
+
+H2_N2_IP=172.16.2.2
+R1_N2_IP=172.16.2.253
+R2_N2_IP=172.16.2.254
+
+H2_N2_IP6=2001:db8:16:2::2
+R1_N2_IP6=2001:db8:16:2::253
+R2_N2_IP6=2001:db8:16:2::254
+
+################################################################################
+# helpers
+
+log_section()
+{
+ echo
+ echo "###########################################################################"
+ echo "$*"
+ echo "###########################################################################"
+ echo
+}
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ "${rc}" -eq "${expected}" ]; then
+ printf "TEST: %-60s [ OK ]\n" "${msg}"
+ nsuccess=$((nsuccess+1))
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read -r a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+}
+
+run_cmd()
+{
+ local cmd="$*"
+ local out
+ local rc
+
+ if [ "$VERBOSE" = "1" ]; then
+ echo "COMMAND: $cmd"
+ fi
+
+ out=$(eval $cmd 2>&1)
+ rc=$?
+ if [ "$VERBOSE" = "1" ] && [ -n "$out" ]; then
+ echo "$out"
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+
+ return $rc
+}
+
+################################################################################
+# setup and teardown
+
+cleanup()
+{
+ local ns
+
+ setup=0
+
+ for ns in h1 h2 r1 r2; do
+ ip netns del $ns 2>/dev/null
+ done
+}
+
+setup_vrf()
+{
+ local ns=$1
+
+ ip -netns "${ns}" ru del pref 0
+ ip -netns "${ns}" ru add pref 32765 from all lookup local
+ ip -netns "${ns}" -6 ru del pref 0
+ ip -netns "${ns}" -6 ru add pref 32765 from all lookup local
+}
+
+create_vrf()
+{
+ local ns=$1
+ local vrf=$2
+ local table=$3
+
+ ip -netns "${ns}" link add "${vrf}" type vrf table "${table}"
+ ip -netns "${ns}" link set "${vrf}" up
+ ip -netns "${ns}" route add vrf "${vrf}" unreachable default metric 8192
+ ip -netns "${ns}" -6 route add vrf "${vrf}" unreachable default metric 8192
+
+ ip -netns "${ns}" addr add 127.0.0.1/8 dev "${vrf}"
+ ip -netns "${ns}" -6 addr add ::1 dev "${vrf}" nodad
+}
+
+setup()
+{
+ local ns
+
+ if [ "${setup}" -eq 1 ]; then
+ return 0
+ fi
+
+ # make sure we are starting with a clean slate
+ cleanup
+
+ setup=1
+
+ #
+ # create nodes as namespaces
+ #
+ for ns in h1 h2 r1 r2; do
+ ip netns add $ns
+ ip -netns $ns li set lo up
+
+ case "${ns}" in
+ h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+ ;;
+ r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+ esac
+ done
+
+ #
+ # create interconnects
+ #
+ ip -netns h1 li add eth0 type veth peer name r1h1
+ ip -netns h1 li set r1h1 netns r1 name eth0 up
+
+ ip -netns h1 li add eth1 type veth peer name r2h1
+ ip -netns h1 li set r2h1 netns r2 name eth0 up
+
+ ip -netns h2 li add eth0 type veth peer name r1h2
+ ip -netns h2 li set r1h2 netns r1 name eth1 up
+
+ ip -netns h2 li add eth1 type veth peer name r2h2
+ ip -netns h2 li set r2h2 netns r2 name eth1 up
+
+ #
+ # h1
+ #
+ ip -netns h1 li add br0 type bridge
+ ip -netns h1 li set br0 up
+ ip -netns h1 addr add dev br0 ${H1_N1_IP}/24
+ ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
+ ip -netns h1 li set eth0 master br0 up
+ ip -netns h1 li set eth1 master br0 up
+
+ # h1 to h2 via r1
+ ip -netns h1 ro add ${H2_N2} via ${R1_N1_IP} dev br0
+ ip -netns h1 -6 ro add ${H2_N2_6} via "${R1_N1_IP6}" dev br0
+
+ #
+ # h2
+ #
+ ip -netns h2 li add br0 type bridge
+ ip -netns h2 li set br0 up
+ ip -netns h2 addr add dev br0 ${H2_N2_IP}/24
+ ip -netns h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad
+ ip -netns h2 li set eth0 master br0 up
+ ip -netns h2 li set eth1 master br0 up
+
+ ip -netns h2 ro add default via ${R2_N2_IP} dev br0
+ ip -netns h2 -6 ro add default via ${R2_N2_IP6} dev br0
+
+ #
+ # r1
+ #
+ setup_vrf r1
+ create_vrf r1 blue 1101
+ create_vrf r1 red 1102
+ ip -netns r1 li set eth0 vrf blue up
+ ip -netns r1 li set eth1 vrf red up
+ ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
+ ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
+ ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24
+ ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
+
+ # Route leak from blue to red
+ ip -netns r1 route add vrf blue ${H2_N2} dev red
+ ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red
+
+ #
+ # r2
+ #
+ ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24
+ ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
+ ip -netns r2 addr add dev eth1 ${R2_N2_IP}/24
+ ip -netns r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad
+
+ # Wait for ip config to settle
+ sleep 2
+}
+
+check_connectivity4()
+{
+ ip netns exec h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1
+}
+
+check_connectivity6()
+{
+ ip netns exec h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1
+}
+
+ipv4_traceroute()
+{
+ log_section "IPv4: VRF ICMP error route lookup traceroute"
+
+ if [ ! -x "$(command -v traceroute)" ]; then
+ echo "SKIP: Could not run IPV4 test without traceroute"
+ return
+ fi
+
+ setup
+
+ # verify connectivity
+ if ! check_connectivity4; then
+ echo "Error: Basic connectivity is broken"
+ ret=1
+ return
+ fi
+
+ if [ "$VERBOSE" = "1" ]; then
+ run_cmd ip netns exec h1 traceroute ${H2_N2_IP}
+ fi
+
+ ip netns exec h1 traceroute ${H2_N2_IP} | grep -q "${R1_N1_IP}"
+ log_test $? 0 "Traceroute reports a hop on r1"
+}
+
+ipv6_traceroute()
+{
+ log_section "IPv6: VRF ICMP error route lookup traceroute"
+
+ if [ ! -x "$(command -v traceroute6)" ]; then
+ echo "SKIP: Could not run IPV6 test without traceroute6"
+ return
+ fi
+
+ setup
+
+ # verify connectivity
+ if ! check_connectivity6; then
+ echo "Error: Basic connectivity is broken"
+ ret=1
+ return
+ fi
+
+ if [ "$VERBOSE" = "1" ]; then
+ run_cmd ip netns exec h1 traceroute6 ${H2_N2_IP6}
+ fi
+
+ ip netns exec h1 traceroute6 ${H2_N2_IP6} | grep -q "${R1_N1_IP6}"
+ log_test $? 0 "Traceroute6 reports a hop on r1"
+}
+
+ipv4_ping()
+{
+ log_section "IPv4: VRF ICMP error route lookup ping"
+
+ setup
+
+ # verify connectivity
+ if ! check_connectivity4; then
+ echo "Error: Basic connectivity is broken"
+ ret=1
+ return
+ fi
+
+ if [ "$VERBOSE" = "1" ]; then
+ echo "Command to check for ICMP ttl exceeded:"
+ run_cmd ip netns exec h1 ping -t1 -c1 -W2 ${H2_N2_IP}
+ fi
+
+ ip netns exec h1 ping -t1 -c1 -W2 ${H2_N2_IP} | grep -q "Time to live exceeded"
+ log_test $? 0 "Ping received ICMP ttl exceeded"
+}
+
+ipv6_ping()
+{
+ log_section "IPv6: VRF ICMP error route lookup ping"
+
+ setup
+
+ # verify connectivity
+ if ! check_connectivity6; then
+ echo "Error: Basic connectivity is broken"
+ ret=1
+ return
+ fi
+
+ if [ "$VERBOSE" = "1" ]; then
+ echo "Command to check for ICMP ttl exceeded:"
+ run_cmd ip netns exec h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6}
+ fi
+
+ ip netns exec h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6} | grep -q "Time exceeded: Hop limit"
+ log_test $? 0 "Ping received ICMP ttl exceeded"
+}
+################################################################################
+# usage
+
+usage()
+{
+ cat <<EOF
+usage: ${0##*/} OPTS
+
+ -4 IPv4 tests only
+ -6 IPv6 tests only
+ -p Pause on fail
+ -v verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# main
+
+# Some systems don't have a ping6 binary anymore
+command -v ping6 > /dev/null 2>&1 && ping6=$(command -v ping6) || ping6=$(command -v ping)
+
+TESTS_IPV4="ipv4_ping ipv4_traceroute"
+TESTS_IPV6="ipv6_ping ipv6_traceroute"
+
+ret=0
+nsuccess=0
+nfail=0
+setup=0
+
+while getopts :46pvh o
+do
+ case $o in
+ 4) TESTS=ipv4;;
+ 6) TESTS=ipv6;;
+ p) PAUSE_ON_FAIL=yes;;
+ v) VERBOSE=1;;
+ h) usage; exit 0;;
+ *) usage; exit 1;;
+ esac
+done
+
+#
+# show user test config
+#
+if [ -z "$TESTS" ]; then
+ TESTS="$TESTS_IPV4 $TESTS_IPV6"
+elif [ "$TESTS" = "ipv4" ]; then
+ TESTS="$TESTS_IPV4"
+elif [ "$TESTS" = "ipv6" ]; then
+ TESTS="$TESTS_IPV6"
+fi
+
+for t in $TESTS
+do
+ case $t in
+ ipv4_ping|ping) ipv4_ping;;
+ ipv4_traceroute|traceroute) ipv4_traceroute;;
+
+ ipv6_ping|ping) ipv6_ping;;
+ ipv6_traceroute|traceroute) ipv6_traceroute;;
+
+ # setup namespaces and config, but do not run any tests
+ setup) setup; exit 0;;
+
+ help) echo "Test names: $TESTS"; exit 0;;
+ esac
+done
+
+cleanup
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n" ${nfail}
+
+exit $ret
--
2.27.0
Powered by blists - more mailing lists