[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20200813082118.GJ4354@dell>
Date: Thu, 13 Aug 2020 09:21:18 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Michael Walle <michael@...le.cc>
Cc: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-hwmon@...r.kernel.org, linux-pwm@...r.kernel.org,
linux-watchdog@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Thierry Reding <thierry.reding@...il.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <maz@...nel.org>, Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, Pavel Machek <pavel@....cz>
Subject: Re: [PATCH v7 06/13] pwm: add support for sl28cpld PWM controller
On Mon, 10 Aug 2020, Michael Walle wrote:
> Am 2020-08-10 09:13, schrieb Lee Jones:
> > On Fri, 07 Aug 2020, Michael Walle wrote:
> >
> > > Hi Uwe, Hi Lee,
> > >
> > > Am 2020-08-06 10:40, schrieb Uwe Kleine-König:
> > > > On Mon, Aug 03, 2020 at 11:35:52AM +0200, Michael Walle wrote:
> > > > > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> > > > > index 7dbcf6973d33..a0d50d70c3b9 100644
> > > > > --- a/drivers/pwm/Kconfig
> > > > > +++ b/drivers/pwm/Kconfig
> > > > > @@ -428,6 +428,16 @@ config PWM_SIFIVE
> > > > > To compile this driver as a module, choose M here: the module
> > > > > will be called pwm-sifive.
> > > > >
> > > > > +config PWM_SL28CPLD
> > > > > + tristate "Kontron sl28cpld PWM support"
> > > > > + select MFD_SIMPLE_MFD_I2C
> > > >
> > > > Is it sensible to present this option to everyone? Maybe
> > > >
> > > > depends on SOME_SYMBOL_ONLY_TRUE_ON_SL28CPLD || COMPILE_TEST
> > >
> > > Because there is now no real MFD driver anymore, there is also
> > > no symbol for that. The closest would be ARCH_ARM64 but I don't
> > > think that is a good idea.
> > >
> > > Lee, what do you think about adding a symbol to the MFD, which
> > > selects MFD_SIMPLE_MFD_I2C but doesn't enable any C modules?
> > >
> > > I.e.
> > > config MFD_SL28CPLD
> > > tristate "Kontron sl28cpld"
> > > select MFD_SIMPLE_MFD_I2C
> > > help
> > > Say yes here to add support for the Kontron sl28cpld board
> > > management controller.
> > >
> > > Then all the other device driver could depend on the MFD_SL28CPLD
> > > symbol.
> >
> > You want to add a virtual symbol to prevent having to present a real
> > one? How is that a reasonable solution?
>
> (1) Its a symbol on which all sl28cpld will depend on. Thus they will
> all be hidden if that is not set.
> (2) the drivers itself wouldn't need to depend on MFD_SIMPLE_MFD_I2C,
> which is more correct, because they don't have anything to do with
> i2c.
Yes, okay.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists