Message-ID: <97abad7a-007d-cf66-39c2-bfa7a522fae6@roeck-us.net>
Date:   Fri, 14 Aug 2020 21:46:08 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Alan Stern <stern@...land.harvard.edu>
Cc:     linux-usb <linux-usb@...r.kernel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: Protecting usb_set_interface() against device removal

On 8/14/20 7:07 PM, Alan Stern wrote:
> On Fri, Aug 14, 2020 at 04:07:03PM -0700, Guenter Roeck wrote:
>> Hi all,
>>
>> over time, there have been a number of reports of crashes in usb_ifnum_to_if(),
>> called from usb_hcd_alloc_bandwidth, which is in turn called from usb_set_interface().
>> Examples are [1] [2] [3]. A typical backtrace is:
>>
>> <3>[ 3489.445468] intel_sst_acpi 808622A8:00: sst: Busy wait failed, cant send this msg
>> <6>[ 3490.507273] usb 1-4: USB disconnect, device number 3
>> <1>[ 3490.516670] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
>> <6>[ 3490.516680] PGD 0 P4D 0
>> <4>[ 3490.516687] Oops: 0000 [#1] PREEMPT SMP PTI
>> <4>[ 3490.516693] CPU: 0 PID: 5633 Comm: V4L2CaptureThre Not tainted 4.19.113-08536-g5d29ca36db06 #1
>> <4>[ 3490.516696] Hardware name: GOOGLE Edgar, BIOS Google_Edgar.7287.167.156 03/25/2019
>> <4>[ 3490.516706] RIP: 0010:usb_ifnum_to_if+0x29/0x40
>> <4>[ 3490.516710] Code: ee 0f 1f 44 00 00 55 48 89 e5 48 8b 8f f8 03 00 00 48 85 c9 74 27 44 0f b6 41 04 4d 85 c0 74 1d 31 ff 48 8b 84 f9 98 00 00 00 <48> 8b 10 0f b6 52 02 39 f2 74 0a 48 ff c7 4c 39 c7 72 e5 31 c0 5d
>> <4>[ 3490.516714] RSP: 0018:ffffa46f42a47a80 EFLAGS: 00010246
>> <4>[ 3490.516718] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff904a396c9000
>> <4>[ 3490.516721] RDX: ffff904a39641320 RSI: 0000000000000001 RDI: 0000000000000000
>> <4>[ 3490.516724] RBP: ffffa46f42a47a80 R08: 0000000000000002 R09: 0000000000000000
>> <4>[ 3490.516727] R10: 0000000000009975 R11: 0000000000000009 R12: 0000000000000000
>> <4>[ 3490.516731] R13: ffff904a396b3800 R14: ffff904a39e88000 R15: 0000000000000000
>> <4>[ 3490.516735] FS: 00007f396448e700(0000) GS:ffff904a3ba00000(0000) knlGS:0000000000000000
>> <4>[ 3490.516738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> <4>[ 3490.516742] CR2: 0000000000000000 CR3: 000000016cb46000 CR4: 00000000001006f0
>> <4>[ 3490.516745] Call Trace:
>> <4>[ 3490.516756] usb_hcd_alloc_bandwidth+0x1ee/0x30f
>> <4>[ 3490.516762] usb_set_interface+0x1a3/0x2b7
>> <4>[ 3490.516773] uvc_video_start_transfer+0x29b/0x4b8 [uvcvideo]
>> <4>[ 3490.516781] uvc_video_start_streaming+0x91/0xdd [uvcvideo]
>> <4>[ 3490.516787] uvc_start_streaming+0x28/0x5d [uvcvideo]
>> <4>[ 3490.516795] vb2_start_streaming+0x61/0x143 [videobuf2_common]
>> <4>[ 3490.516801] vb2_core_streamon+0xf7/0x10f [videobuf2_common]
>> <4>[ 3490.516807] uvc_queue_streamon+0x2e/0x41 [uvcvideo]
>> <4>[ 3490.516814] uvc_ioctl_streamon+0x42/0x5c [uvcvideo]
>> <4>[ 3490.516820] __video_do_ioctl+0x33d/0x42a
>> <4>[ 3490.516826] video_usercopy+0x34e/0x5ff
>> <4>[ 3490.516831] ? video_ioctl2+0x16/0x16
>> <4>[ 3490.516837] v4l2_ioctl+0x46/0x53
>> <4>[ 3490.516843] do_vfs_ioctl+0x50a/0x76f
>> <4>[ 3490.516848] ksys_ioctl+0x58/0x83
>> <4>[ 3490.516853] __x64_sys_ioctl+0x1a/0x1e
>> <4>[ 3490.516858] do_syscall_64+0x54/0xde
>>
>> I have been able to reproduce the problem on a Chromebook by strategically placing
>> msleep() calls into usb_set_interface() and usb_disable_device(). Ultimately, the
>> problem boils down to lack of protection against device removal in usb_set_interface()
>> [and/or possibly other callers of usb_ifnum_to_if()].
>>
>> Sequence of events is roughly as follows:
>>
>> - usb_set_interface() is called and proceeds to some point, possibly to
>>   mutex_lock(hcd->bandwidth_mutex);
>> - Device removal event is detected, and usb_disable_device() is called
> 
> At this point all interface drivers get unbound (their disconnect 
> routines are called).
> 
>> - usb_disable_device() starts removing actconfig data. It has removed
>>   and cleared dev->actconfig->interface[i], but not dev->actconfig
>> - usb_set_interface() calls usb_hcd_alloc_bandwidth(), which calls
>>   usb_ifnum_to_if()
>> - In usb_ifnum_to_if(), dev->actconfig is not NULL, but
>>   dev->actconfig->interface[i] is NULL
>> - crash
>>
>> Question is what we can do about this. Checking if dev->state != USB_STATE_NOTATTACHED
>> in usb_ifnum_to_if() might be a possible approach, but strictly speaking it would
>> still be racy since there is still no lock against device removal. I have not tried
>> calling usb_lock_device() in usb_set_interface() - would that possibly be an option ?
> 
> As far as I know, protecting against these races is the responsibility 
> of the USB interface drivers.  They must make sure that their disconnect 
> routines block until all outstanding calls to usb_set_interface return 
> (in fact, until all outstanding device accesses have finished).
> 
> For instance, in the log extract you showed, it's obvious that the 
> uvc_start_streaming routine was running after the disconnect routine had 
> returned, which looks like a bug in itself: Once the disconnect routine 
> returns, the driver is not supposed to try to access the device at all 
> because some other driver may now be bound to it.
> 

Hmm, if I understand you correctly, the call to uvc_disconnect() should prevent
all subsequent activity on the usb interface. I'll check what other drivers do
in that situation and try to find a solution.

> We can't just call usb_lock_device from within usb_set_interface, 
> because usb_set_interface is often called with that lock already held.
> 
Ok, I suspected that much. Thanks a lot for the clarification.

Guenter

Powered by blists - more mailing lists