lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200819212305.6caa4b7d@aktux>
Date:   Wed, 19 Aug 2020 21:23:05 +0200
From:   Andreas Kemnade <andreas@...nade.info>
To:     Adam Ford <aford173@...il.com>
Cc:     linux-pm@...r.kernel.org, aford@...conembedded.com,
        hns@...delico.com, kernel test robot <lkp@...el.com>,
        Tony Lindgren <tony@...mide.com>,
        Russell King <linux@...linux.org.uk>,
        Eduardo Valentin <edubezval@...il.com>,
        Keerthy <j-keerthy@...com>, Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Amit Kucheria <amitk@...nel.org>, linux-omap@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V2 1/2] thermal: ti-soc-thermal: Enable addition power
 management

On Wed, 19 Aug 2020 07:59:23 -0500
Adam Ford <aford173@...il.com> wrote:

> The bandgap sensor can be idled when the processor is too, but it
> isn't currently being done, so the power consumption of OMAP3
> boards can elevated if the bangap sensor is enabled.
> 
> This patch attempts to use some additional power management
> to idle the clock to the bandgap when not needed.
> 
> Signed-off-by: Adam Ford <aford173@...il.com>
> Reported-by: kernel test robot <lkp@...el.com>
> ---
> V2: Fix issue where variable stating the suspend mode isn't being
>     properly set and cleared.
> 
I get
root@(none):/# cat /sys/class/thermal/thermal_zone0/type 
cpu_thermal
root@(none):/# cat /sys/class/thermal/thermal_zone0/temp 
50000
root@(none):/# cat /sys/class/thermal/thermal_zone1/     
available_policies  mode                subsystem/
integral_cutoff     offset              sustainable_power
k_d                 passive             temp
k_i                 policy              type
k_po                power/              uevent
k_pu                slope               
root@(none):/# cat /sys/class/thermal/thermal_zone1/type 
bq27000-battery
root@(none):/# cat /sys/kernel/debug/pm_debug/count 
usbhost_pwrdm (ON),OFF:3459,RET:635,INA:0,ON:4095,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
sgx_pwrdm (OFF),OFF:1,RET:0,INA:1,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
core_pwrdm (ON),OFF:86,RET:7,INA:0,ON:94,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
per_pwrdm (ON),OFF:1518,RET:64,INA:0,ON:1583,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
dss_pwrdm (ON),OFF:3459,RET:635,INA:0,ON:4095,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
neon_pwrdm (ON),OFF:2845,RET:1131,INA:119,ON:4096,RET-LOGIC-OFF:0
mpu_pwrdm (ON),OFF:2845,RET:1130,INA:119,ON:4095,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
usbhost_clkdm->usbhost_pwrdm (1)
sgx_clkdm->sgx_pwrdm (0)
per_clkdm->per_pwrdm (13)
cam_clkdm->cam_pwrdm (0)
dss_clkdm->dss_pwrdm (1)
d2d_clkdm->core_pwrdm (0)
iva2_clkdm->iva2_pwrdm (0)
mpu_clkdm->mpu_pwrdm (0)
core_l4_clkdm->core_pwrdm (20)
core_l3_clkdm->core_pwrdm (1)
neon_clkdm->neon_pwrdm (0)
root@(none):/# 

So things still turn off.

Tested-by: Andreas Kemnade <andreas@...nade.info> # GTA04

> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index ab19ceff6e2a..9404631bea4d 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -25,10 +25,18 @@
>  #include <linux/of_platform.h>
>  #include <linux/of_irq.h>
>  #include <linux/io.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pm.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  
>  #include "ti-bandgap.h"
>  
>  static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id);
> +static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
> +				  unsigned long cmd, void *v);
>  
>  /***   Helper functions to access registers and their bitfields   ***/
>  
> @@ -1008,6 +1016,9 @@ int ti_bandgap_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	bgp->nb.notifier_call = bandgap_omap_cpu_notifier;
> +	cpu_pm_register_notifier(&bgp->nb);
> +
>  	return 0;
>  
>  remove_last_cooling:
> @@ -1041,7 +1052,9 @@ int ti_bandgap_remove(struct platform_device *pdev)
>  	struct ti_bandgap *bgp = platform_get_drvdata(pdev);
>  	int i;
>  
> -	/* First thing is to remove sensor interfaces */
> +	cpu_pm_unregister_notifier(&bgp->nb);
> +
> +	/* Remove sensor interfaces */
>  	for (i = 0; i < bgp->conf->sensor_count; i++) {
>  		if (bgp->conf->sensors[i].unregister_cooling)
>  			bgp->conf->sensors[i].unregister_cooling(bgp, i);
> @@ -1150,9 +1163,43 @@ static int ti_bandgap_suspend(struct device *dev)
>  	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
>  		clk_disable_unprepare(bgp->fclock);
>  
> +	bgp->is_suspended = true;
> +
>  	return err;
>  }
>  
> +static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
> +				  unsigned long cmd, void *v)
> +{
> +	struct ti_bandgap *bgp;
> +
> +	bgp = container_of(nb, struct ti_bandgap, nb);
> +
> +	spin_lock(&bgp->lock);
> +	switch (cmd) {
> +	case CPU_CLUSTER_PM_ENTER:
> +		if (bgp->is_suspended)
> +			break;
> +		ti_bandgap_save_ctxt(bgp);
> +		ti_bandgap_power(bgp, false);
> +		if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
> +			clk_disable(bgp->fclock);
> +		break;
> +	case CPU_CLUSTER_PM_ENTER_FAILED:
> +	case CPU_CLUSTER_PM_EXIT:
> +		if (bgp->is_suspended)
> +			break;
> +		if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
> +			clk_enable(bgp->fclock);
> +		ti_bandgap_power(bgp, true);
> +		ti_bandgap_restore_ctxt(bgp);
> +		break;
> +	}
> +	spin_unlock(&bgp->lock);
> +
> +	return NOTIFY_OK;
> +}
> +
>  static int ti_bandgap_resume(struct device *dev)
>  {
>  	struct ti_bandgap *bgp = dev_get_drvdata(dev);
> @@ -1161,6 +1208,7 @@ static int ti_bandgap_resume(struct device *dev)
>  		clk_prepare_enable(bgp->fclock);
>  
>  	ti_bandgap_power(bgp, true);
> +	bgp->is_suspended = false;
>  
>  	return ti_bandgap_restore_ctxt(bgp);
>  }
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> index fce4657e9486..ed0ea4b17b25 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> @@ -12,6 +12,10 @@
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
>  #include <linux/err.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pm.h>
>  
>  struct gpio_desc;
>  
> @@ -203,6 +207,8 @@ struct ti_bandgap {
>  	int				irq;
>  	struct gpio_desc		*tshut_gpiod;
>  	u32				clk_rate;
> +	struct notifier_block		nb;
> +	unsigned int is_suspended:1;
>  };
>  
>  /**

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ