[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200823161550.3981-20-krzk@kernel.org>
Date: Sun, 23 Aug 2020 18:15:48 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mmc@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-pwm@...r.kernel.org, linux-serial@...r.kernel.org,
linux-pm@...r.kernel.org, linux-watchdog@...r.kernel.org
Cc: Thierry Reding <thierry.reding@...il.com>,
Anson Huang <Anson.Huang@....com>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 20/22] arm64: dts: imx8qxp: Remove i.MX7 compatible from UART
The UART on i.MX 8QXP has its own compatible described in bindings
and used in the driver (with its own quirks). Remove additional
fsl,imx7ulp-lpuart compatible to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml: serial@...60000:
compatible: ['fsl,imx8qxp-lpuart', 'fsl,imx7ulp-lpuart'] is too long
From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml: serial@...60000:
compatible: Additional items are not allowed ('fsl,imx7ulp-lpuart' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index e46faac1fe71..61bccb69f09e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -257,7 +257,7 @@
};
adma_lpuart0: serial@...60000 {
- compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ compatible = "fsl,imx8qxp-lpuart";
reg = <0x5a060000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
@@ -268,7 +268,7 @@
};
adma_lpuart1: serial@...70000 {
- compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ compatible = "fsl,imx8qxp-lpuart";
reg = <0x5a070000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
@@ -279,7 +279,7 @@
};
adma_lpuart2: serial@...80000 {
- compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ compatible = "fsl,imx8qxp-lpuart";
reg = <0x5a080000 0x1000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
@@ -290,7 +290,7 @@
};
adma_lpuart3: serial@...90000 {
- compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ compatible = "fsl,imx8qxp-lpuart";
reg = <0x5a090000 0x1000>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
--
2.17.1
Powered by blists - more mailing lists