linux-kernel - Re: [PATCH v5 0/3] mmc: Adding support for Microchip Sparx5 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAPDyKFq+eJgGZVxLqY3WP8DAtCMGGtc1LNGvTmCPTy7siSDddA@mail.gmail.com>
Date:   Tue, 25 Aug 2020 11:38:24 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Lars Povlsen <lars.povlsen@...rochip.com>
Cc:     Adrian Hunter <adrian.hunter@...el.com>, SoC Team <soc@...nel.org>,
        Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        DTML <devicetree@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: Re: [PATCH v5 0/3] mmc: Adding support for Microchip Sparx5 SoC

On Tue, 25 Aug 2020 at 10:14, Lars Povlsen <lars.povlsen@...rochip.com> wrote:
>
> The patch adds eMMC support for Sparx5, by adding a driver for the SoC
> SDHCI controller, DT configuration and DT binding documentation.
>
> Changes in v5:
> - DT+yaml: Change (mmc|sdhci)@600800000 to mmc0@...800000
> - Add missing "static" attribute to probe function
> - Drop MMC_SDHCI_IO_ACCESSORS, as it is not required (anymore)
>
> Changes in v4:
> - Disable clock if sdhci_add_host() fails
> - Remove dev_err if sdhci_add_host() fails
>
> Changes in v3:
> - Add dt-bindings for property "microchip,clock-delay"
> - Enforce "microchip,clock-delay" valid range in driver
> - Removed a noisy pr_debug() in sdhci_sparx5_adma_write_desc()
>
> Changes in v2:
> - Changes in driver as per review comments
>  - Drop debug code
>  - Drop sysfs code
>  - use usleep_range()
>  - use mmc_hostname() in pr_debug()
>  - Remove deactivated code
>  - Minor cosmetics
>
> Lars Povlsen (3):
>   dt-bindings: mmc: Add Sparx5 SDHCI controller bindings
>   sdhci: sparx5: Add Sparx5 SoC eMMC driver
>   arm64: dts: sparx5: Add Sparx5 eMMC support
>
>  .../mmc/microchip,dw-sparx5-sdhci.yaml        |  65 +++++
>  arch/arm64/boot/dts/microchip/sparx5.dtsi     |  24 ++
>  .../boot/dts/microchip/sparx5_pcb125.dts      |  23 ++
>  .../boot/dts/microchip/sparx5_pcb134_emmc.dts |  23 ++
>  .../boot/dts/microchip/sparx5_pcb135_emmc.dts |  23 ++
>  drivers/mmc/host/Kconfig                      |  12 +
>  drivers/mmc/host/Makefile                     |   1 +
>  drivers/mmc/host/sdhci-of-sparx5.c            | 269 ++++++++++++++++++
>  8 files changed, 440 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
>  create mode 100644 drivers/mmc/host/sdhci-of-sparx5.c
>

For some reason, patchwork doesn't seem to accept your patches. Can
you please have a look to figure it out, at least until next time.

In this case, I picked them from the emails, so patch 1 and patch2
applied for next, thanks!

Kind regards
Uffe