lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFPSGXahb7KzsM3iZFjW=JjZAYr0h1vwMx2ROrwR=x8MCchn1Q@mail.gmail.com>
Date:   Thu, 27 Aug 2020 01:11:34 +0800
From:   Kevin Tang <kevin3.tang@...il.com>
To:     Sam Ravnborg <sam@...nborg.org>
Cc:     Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>,
        Sean Paul <sean@...rly.run>, David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Orson Zhai <orsonzhai@...il.com>,
        "Linux-Kernel@...r. Kernel. Org" <linux-kernel@...r.kernel.org>,
        ML dri-devel <dri-devel@...ts.freedesktop.org>,
        Chunyan Zhang <zhang.lyra@...il.com>
Subject: Re: [PATCH RFC v6 1/6] dt-bindings: display: add Unisoc's drm master bindings

Sam Ravnborg <sam@...nborg.org> 于2020年7月29日周三 上午4:27写道:
>
> Hi Kevin
>
> On Tue, Jul 28, 2020 at 06:07:54PM +0800, Kevin Tang wrote:
> > From: Kevin Tang <kevin.tang@...soc.com>
> >
> > The Unisoc DRM master device is a virtual device needed to list all
> > DPU devices or other display interface nodes that comprise the
> > graphics subsystem
> >
> > Cc: Orson Zhai <orsonzhai@...il.com>
> > Cc: Chunyan Zhang <zhang.lyra@...il.com>
> > Signed-off-by: Kevin Tang <kevin.tang@...soc.com>
> > ---
> >  .../devicetree/bindings/display/sprd/drm.yaml      | 36 ++++++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/sprd/drm.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/sprd/drm.yaml b/Documentation/devicetree/bindings/display/sprd/drm.yaml
> > new file mode 100644
> > index 0000000..b5792c0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/sprd/drm.yaml
> drm seems like a sub-optimal name.
> How about usign the compatible name "display-subsystem" as it is a bit
> more specific (but not good).
You're right, maybe "sprd,drm.yaml" or "sprd-drm.yaml" will be better
>
> > @@ -0,0 +1,36 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> Any chance this can be (GPL-2.0-only OR BSD-2-Clause).
> I noticed that for example clock/sprd,sc9863a-clk.yaml uses this license
> so I hope this is OK.
I will add GPL-2.0-only to it.
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/sprd/drm.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Unisoc DRM master device
> > +
> > +maintainers:
> > +  - Mark Rutland <mark.rutland@....com>
> > +
> > +description: |
> > +  The Unisoc DRM master device is a virtual device needed to list all
> > +  DPU devices or other display interface nodes that comprise the
> > +  graphics subsystem.
> > +
> > +properties:
> > +  compatible:
> > +    const: sprd,display-subsystem
> > +
> > +  ports:
> > +    description:
> > +      Should contain a list of phandles pointing to display interface port
> > +      of DPU devices.
> Add type - like this:
> $ref: /schemas/types.yaml#/definitions/phandle-array
>
> See for example display/rockchip/rockchip-drm.yaml
>
> Any specific reason why this is not a ports node like used by many other
> display bindings?
> In other words - I think this is too simple.
We only support one display pipeline now, other interface, like
DP(DisplayPort), HDMI...will be add later...

  ports:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description: |
      Should contain a list of phandles pointing to display interface port
      of dpu devices.. dpu definitions as defined in
      Documentation/devicetree/bindings/display/sprd/sprd,dpu.yaml


>
> > +
> > +required:
> > +  - compatible
> > +  - ports
> > +
>
> Add:
> additionalProperties: false
>
> so we catch if other properties sneak in.
>
> > +examples:
> > +  - |
> > +    display-subsystem {
> > +        compatible = "sprd,display-subsystem";
> > +        ports = <&dpu_out>;
> > +    };
> > +
> > --
> > 2.7.4
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@...ts.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ