[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200826171230.17041-1-lindsey.stanpoor@gmail.com>
Date: Wed, 26 Aug 2020 10:12:29 -0700
From: lindsey.stanpoor@...il.com
To: linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org
Cc: gregkh@...uxfoundation.org, robh+dt@...nel.org, heiko@...ech.de,
balbi@...nel.org, cnemo@...anota.com
Subject: [PATCH 3/4] arm64: dts: rockchip: rk3328 usb3 controller node
From: Cameron Nemo <cnemo@...anota.com>
RK3328 SoCs have one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.
Signed-off-by: William Wu <william.wu@...k-chips.com>
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
Signed-off-by: Cameron Nemo <cnemo@...anota.com>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index bbdb19a3e85d..27e86bf06d3e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -983,6 +983,33 @@ usb_host0_ohci: usb@...d0000 {
status = "disabled";
};
+ usbdrd3: usb@...00000 {
+ compatible = "rockchip,rk3328-dwc3";
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+ <&cru ACLK_USB3OTG>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3: dwc3@...00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@...11000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
2.28.0
Powered by blists - more mailing lists