[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200830111115.32623-1-krzk@kernel.org>
Date: Sun, 30 Aug 2020 13:11:15 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>,
Rob Herring <robh+dt@...nel.org>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH] dt-bindings: leds: common: Add mmc0 as default trigger
MMC could be a default trigger so add a pattern to match it and fix
dtbs_check warnings like:
arch/arm/boot/dts/exynos4412-odroidx.dt.yaml: leds: led2:linux,default-trigger:0:
'mmc0' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
.../devicetree/bindings/leds/common.yaml | 39 ++++++++++---------
1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index a2a541bca73c..6b38f9f3792c 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -78,25 +78,26 @@ properties:
This parameter, if present, is a string defining the trigger assigned to
the LED.
$ref: /schemas/types.yaml#definitions/string
-
- enum:
- # LED will act as a back-light, controlled by the framebuffer system
- - backlight
- # LED will turn on (but for leds-gpio see "default-state" property in
- # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
- - default-on
- # LED "double" flashes at a load average based rate
- - heartbeat
- # LED indicates disk activity
- - disk-activity
- # LED indicates IDE disk activity (deprecated), in new implementations
- # use "disk-activity"
- - ide-disk
- # LED flashes at a fixed, configurable rate
- - timer
- # LED alters the brightness for the specified duration with one software
- # timer (requires "led-pattern" property)
- - pattern
+ oneOf:
+ - enum:
+ # LED will act as a back-light, controlled by the framebuffer system
+ - backlight
+ # LED will turn on (but for leds-gpio see "default-state" property in
+ # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
+ - default-on
+ # LED "double" flashes at a load average based rate
+ - heartbeat
+ # LED indicates disk activity
+ - disk-activity
+ # LED indicates IDE disk activity (deprecated), in new implementations
+ # use "disk-activity"
+ - ide-disk
+ # LED flashes at a fixed, configurable rate
+ - timer
+ # LED alters the brightness for the specified duration with one software
+ # timer (requires "led-pattern" property)
+ - pattern
+ - pattern: "^mmc[0-9]+$"
led-pattern:
description: |
--
2.17.1
Powered by blists - more mailing lists