lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdXkGBfwNOwd5-=U3wg6U0O+3BErbXuybbuytgzsCmZqRQ@mail.gmail.com>
Date:   Thu, 3 Sep 2020 14:20:11 +0200
From:   Geert Uytterhoeven <geert@...ux-m68k.org>
To:     Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Cc:     Magnus Damm <magnus.damm@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Prabhakar <prabhakar.csengg@...il.com>
Subject: Re: [PATCH 4/4] ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication

Hi Prabhakar,

On Tue, Aug 25, 2020 at 6:28 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> Add support for LED trigger on SD2 interface.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> Reviewed-by: Chris Paterson <Chris.Paterson2@...esas.com>

> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> @@ -63,6 +63,16 @@
>                 enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
>         };
>
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               sdhi2_led {
> +                       label = "sdio-led";
> +                       gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;

GPIO_ACTIVE_HIGH?

The LED is driven by an NPN transistor, with the LED between 3.3V and
the transistor's collector.

> +                       linux,default-trigger = "mmc1";
> +               };
> +       };
> +
>         lvds-receiver {
>                 compatible = "ti,ds90cf384a", "lvds-decoder";
>                 vcc-supply = <&vcc_3v3_tft1>;

With the above fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ