| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Sep 2020 14:36:47 +0200
From: Paul Cercueil <paul@...pouillou.net>
To: Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Rob Herring <robh+dt@...nel.org>
Cc: od@...c.me, devicetree@...r.kernel.org, linux-mips@...r.kernel.org,
linux-kernel@...r.kernel.org, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH] MIPS: dts/ingenic: Cleanup qi_lb60.dts
Cleanup a bit the Device Tree file:
1. Respect the number of cells in GPIO descriptors and keyboard matrix;
2. Use 'ecc-engine' instead of deprecated 'ingenic,bch-controller'
property;
3. The NAND's rb-gpios is actually active high;
3. The FRE/FWE pins must be configured in the proper mode for the NAND
to work if it was not already done by the bootloader.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
arch/mips/boot/dts/ingenic/qi_lb60.dts | 137 ++++++++++++-------------
1 file changed, 68 insertions(+), 69 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index bf298268f1a1..ba0218971572 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -109,74 +109,73 @@ keyboard {
debounce-delay-ms = <10>;
wakeup-source;
- row-gpios = <&gpd 18 0 &gpd 19 0 &gpd 20 0 &gpd 21 0
- &gpd 22 0 &gpd 23 0 &gpd 24 0 &gpd 26 0>;
- col-gpios = <&gpc 10 0 &gpc 11 0 &gpc 12 0 &gpc 13 0
- &gpc 14 0 &gpc 15 0 &gpc 16 0 &gpc 17 0>;
+ row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>,
+ <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>;
+ col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>,
+ <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>;
gpio-activelow;
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_F1) /* S2 */
- MATRIX_KEY(0, 1, KEY_F2) /* S3 */
- MATRIX_KEY(0, 2, KEY_F3) /* S4 */
- MATRIX_KEY(0, 3, KEY_F4) /* S5 */
- MATRIX_KEY(0, 4, KEY_F5) /* S6 */
- MATRIX_KEY(0, 5, KEY_F6) /* S7 */
- MATRIX_KEY(0, 6, KEY_F7) /* S8 */
-
- MATRIX_KEY(1, 0, KEY_Q) /* S10 */
- MATRIX_KEY(1, 1, KEY_W) /* S11 */
- MATRIX_KEY(1, 2, KEY_E) /* S12 */
- MATRIX_KEY(1, 3, KEY_R) /* S13 */
- MATRIX_KEY(1, 4, KEY_T) /* S14 */
- MATRIX_KEY(1, 5, KEY_Y) /* S15 */
- MATRIX_KEY(1, 6, KEY_U) /* S16 */
- MATRIX_KEY(1, 7, KEY_I) /* S17 */
- MATRIX_KEY(2, 0, KEY_A) /* S18 */
- MATRIX_KEY(2, 1, KEY_S) /* S19 */
- MATRIX_KEY(2, 2, KEY_D) /* S20 */
- MATRIX_KEY(2, 3, KEY_F) /* S21 */
- MATRIX_KEY(2, 4, KEY_G) /* S22 */
- MATRIX_KEY(2, 5, KEY_H) /* S23 */
- MATRIX_KEY(2, 6, KEY_J) /* S24 */
- MATRIX_KEY(2, 7, KEY_K) /* S25 */
- MATRIX_KEY(3, 0, KEY_ESC) /* S26 */
- MATRIX_KEY(3, 1, KEY_Z) /* S27 */
- MATRIX_KEY(3, 2, KEY_X) /* S28 */
- MATRIX_KEY(3, 3, KEY_C) /* S29 */
- MATRIX_KEY(3, 4, KEY_V) /* S30 */
- MATRIX_KEY(3, 5, KEY_B) /* S31 */
- MATRIX_KEY(3, 6, KEY_N) /* S32 */
- MATRIX_KEY(3, 7, KEY_M) /* S33 */
- MATRIX_KEY(4, 0, KEY_TAB) /* S34 */
- MATRIX_KEY(4, 1, KEY_CAPSLOCK) /* S35 */
- MATRIX_KEY(4, 2, KEY_BACKSLASH) /* S36 */
- MATRIX_KEY(4, 3, KEY_APOSTROPHE) /* S37 */
- MATRIX_KEY(4, 4, KEY_COMMA) /* S38 */
- MATRIX_KEY(4, 5, KEY_DOT) /* S39 */
- MATRIX_KEY(4, 6, KEY_SLASH) /* S40 */
- MATRIX_KEY(4, 7, KEY_UP) /* S41 */
- MATRIX_KEY(5, 0, KEY_O) /* S42 */
- MATRIX_KEY(5, 1, KEY_L) /* S43 */
- MATRIX_KEY(5, 2, KEY_EQUAL) /* S44 */
- MATRIX_KEY(5, 3, KEY_QI_UPRED) /* S45 */
- MATRIX_KEY(5, 4, KEY_SPACE) /* S46 */
- MATRIX_KEY(5, 5, KEY_QI_QI) /* S47 */
- MATRIX_KEY(5, 6, KEY_RIGHTCTRL) /* S48 */
- MATRIX_KEY(5, 7, KEY_LEFT) /* S49 */
- MATRIX_KEY(6, 0, KEY_F8) /* S50 */
- MATRIX_KEY(6, 1, KEY_P) /* S51 */
- MATRIX_KEY(6, 2, KEY_BACKSPACE)/* S52 */
- MATRIX_KEY(6, 3, KEY_ENTER) /* S53 */
- MATRIX_KEY(6, 4, KEY_QI_VOLUP) /* S54 */
- MATRIX_KEY(6, 5, KEY_QI_VOLDOWN) /* S55 */
- MATRIX_KEY(6, 6, KEY_DOWN) /* S56 */
- MATRIX_KEY(6, 7, KEY_RIGHT) /* S57 */
-
- MATRIX_KEY(7, 0, KEY_LEFTSHIFT) /* S58 */
- MATRIX_KEY(7, 1, KEY_LEFTALT) /* S59 */
- MATRIX_KEY(7, 2, KEY_QI_FN) /* S60 */
- >;
+ linux,keymap =
+ <MATRIX_KEY(0, 0, KEY_F1)>, /* S2 */
+ <MATRIX_KEY(0, 1, KEY_F2)>, /* S3 */
+ <MATRIX_KEY(0, 2, KEY_F3)>, /* S4 */
+ <MATRIX_KEY(0, 3, KEY_F4)>, /* S5 */
+ <MATRIX_KEY(0, 4, KEY_F5)>, /* S6 */
+ <MATRIX_KEY(0, 5, KEY_F6)>, /* S7 */
+ <MATRIX_KEY(0, 6, KEY_F7)>, /* S8 */
+
+ <MATRIX_KEY(1, 0, KEY_Q)>, /* S10 */
+ <MATRIX_KEY(1, 1, KEY_W)>, /* S11 */
+ <MATRIX_KEY(1, 2, KEY_E)>, /* S12 */
+ <MATRIX_KEY(1, 3, KEY_R)>, /* S13 */
+ <MATRIX_KEY(1, 4, KEY_T)>, /* S14 */
+ <MATRIX_KEY(1, 5, KEY_Y)>, /* S15 */
+ <MATRIX_KEY(1, 6, KEY_U)>, /* S16 */
+ <MATRIX_KEY(1, 7, KEY_I)>, /* S17 */
+ <MATRIX_KEY(2, 0, KEY_A)>, /* S18 */
+ <MATRIX_KEY(2, 1, KEY_S)>, /* S19 */
+ <MATRIX_KEY(2, 2, KEY_D)>, /* S20 */
+ <MATRIX_KEY(2, 3, KEY_F)>, /* S21 */
+ <MATRIX_KEY(2, 4, KEY_G)>, /* S22 */
+ <MATRIX_KEY(2, 5, KEY_H)>, /* S23 */
+ <MATRIX_KEY(2, 6, KEY_J)>, /* S24 */
+ <MATRIX_KEY(2, 7, KEY_K)>, /* S25 */
+ <MATRIX_KEY(3, 0, KEY_ESC)>, /* S26 */
+ <MATRIX_KEY(3, 1, KEY_Z)>, /* S27 */
+ <MATRIX_KEY(3, 2, KEY_X)>, /* S28 */
+ <MATRIX_KEY(3, 3, KEY_C)>, /* S29 */
+ <MATRIX_KEY(3, 4, KEY_V)>, /* S30 */
+ <MATRIX_KEY(3, 5, KEY_B)>, /* S31 */
+ <MATRIX_KEY(3, 6, KEY_N)>, /* S32 */
+ <MATRIX_KEY(3, 7, KEY_M)>, /* S33 */
+ <MATRIX_KEY(4, 0, KEY_TAB)>, /* S34 */
+ <MATRIX_KEY(4, 1, KEY_CAPSLOCK)>, /* S35 */
+ <MATRIX_KEY(4, 2, KEY_BACKSLASH)>, /* S36 */
+ <MATRIX_KEY(4, 3, KEY_APOSTROPHE)>, /* S37 */
+ <MATRIX_KEY(4, 4, KEY_COMMA)>, /* S38 */
+ <MATRIX_KEY(4, 5, KEY_DOT)>, /* S39 */
+ <MATRIX_KEY(4, 6, KEY_SLASH)>, /* S40 */
+ <MATRIX_KEY(4, 7, KEY_UP)>, /* S41 */
+ <MATRIX_KEY(5, 0, KEY_O)>, /* S42 */
+ <MATRIX_KEY(5, 1, KEY_L)>, /* S43 */
+ <MATRIX_KEY(5, 2, KEY_EQUAL)>, /* S44 */
+ <MATRIX_KEY(5, 3, KEY_QI_UPRED)>, /* S45 */
+ <MATRIX_KEY(5, 4, KEY_SPACE)>, /* S46 */
+ <MATRIX_KEY(5, 5, KEY_QI_QI)>, /* S47 */
+ <MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>, /* S48 */
+ <MATRIX_KEY(5, 7, KEY_LEFT)>, /* S49 */
+ <MATRIX_KEY(6, 0, KEY_F8)>, /* S50 */
+ <MATRIX_KEY(6, 1, KEY_P)>, /* S51 */
+ <MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */
+ <MATRIX_KEY(6, 3, KEY_ENTER)>, /* S53 */
+ <MATRIX_KEY(6, 4, KEY_QI_VOLUP)>, /* S54 */
+ <MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>, /* S55 */
+ <MATRIX_KEY(6, 6, KEY_DOWN)>, /* S56 */
+ <MATRIX_KEY(6, 7, KEY_RIGHT)>, /* S57 */
+
+ <MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>, /* S58 */
+ <MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */
+ <MATRIX_KEY(7, 2, KEY_QI_FN)>; /* S60 */
};
spi {
@@ -261,12 +260,12 @@ nandc: nand-controller@1 {
#address-cells = <1>;
#size-cells = <0>;
- ingenic,bch-controller = <&ecc>;
+ ecc-engine = <&ecc>;
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc>;
- rb-gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+ rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>;
nand@1 {
reg = <1>;
@@ -324,7 +323,7 @@ pins_lcd: lcd {
pins_nemc: nemc {
function = "nand";
- groups = "nand-cs1";
+ groups = "nand-fre-fwe", "nand-cs1";
};
pins_uart0: uart0 {
--
2.28.0
Powered by blists - more mailing lists